Fosmon 1x2 Splitter User Manual
Fosmon 1x2 HDMI Splitter w/ US AC Adapter
(4k*2k@30Hz, Supports 3D)
Thank you for purchasing this Fosmon product. For optimum performance and safety, please read this user manual
carefully before operating and keep it for future reference.
Fosmon’s 1x2 HDMI splitter allows you to split 1 HDMI input into 2 dierent outputs.
Disclaimer Statement
We are not liable for any damage or destruction to personal properties that are contained inside or outside of the Fosmon
product.
Product Diagram
Power LED LED of HDMI INPUT
4KTV/HD TV
2 OUTPUTS1 INPUT
4KTV/HD TV
INPUTDC 5V
Power Supply Socket HDMI INPUT
LED of HDMI 1 OUTPUT LED of HDMI 2 OUTPUT
OUTPUT 2OUTPUT 1
HDMI 1 OUTPUT HDMI 2 OUTPUT
Game Consoles
1 x2 SPLITTER
Streaming Devices/
Blu-Ray Players
Installation and Safety Precautions
• Cables must be placed well, where it would not be stepped on or pinched. Make sure cables are fully inserted into ports.
• To provide sucient ventilation during use, make sure there is at least 1 inch of clearance on each side of the device
(except the side where it rests on a at surface).
• Do not set up this product adjacent to a water source or an environment that has excessive moisture.
• Do not operate the product when hands are wet.
• Place this product on a at surface and keep it out of reach of children.
• Unplug the product when it is not in used for an extended period of time.
• Do not attempt to dismantle the product on your own.
How to Connect
1. Connect power adapter to outlet and the other end into HDMI splitter
2. Connect input device HDMI cable into input port
3. Connect output device HDMI cable to output port
Package Includes
• 1x HDMI 1x2 Splitter
• 1x Power Adapter
• 1x User Manual
Specications
Audio and Video Environmental
Input
Output
Resolution
HDMI Version
HDCP Version
Input Video Signal
Input DDC Signal
Audio Format
Input Cable Recommendation
HDMI x 1
HDMI x 2
4K x 2K @30Hz
1.4a
HDCP 1.3
Up to 48-bit deep colorColor Depth
0.5-1.0 volts p-p
5 volts p-p ( TTL)
DTS-HD, Dolby-trueHD, LPCM7.1,
DTS, Dolby-AC3, DSD
≤50ft/15m AWG24 HDMI standard
cable
Operating Temperature Range
Operating Humidity Range
Mechanical
Micro USB Port
Dimension (L x W x H)
Weight
Troubleshooting
Issue Possible Solution
32°F to 104°F / 0°C to 40°C
5% to 90% RH (No Condensation)
Optional Power Support (cable
not included)
2.8 x 2.4 x 1in / 71 x 61 x 25mm
4.51oz / 128g
No Power
No Audio or Bad
Quality Audio
No Video or Bad
Quality Video
1. If the connected HDMI device does not supply enough power to the splitter, please use the provided power adapter.
1. Check if the audio equipment is on.
2. Check if the input source is on.
3. Check if the input source audio output setting is set up correctly. Please refer to your input source user manual
on how to change this setting.
4. Check all cables and make sure they are fully seated into ports.
5. Try changing to a dierent known good cable.
1. Check if the display is on.
2. Check if the input source is on.
3. Check all cables and make sure they are fully seated into ports.
4. Try changing to a dierent known good cable.
Follow Us On Social Media Limited Lifetime Warranty
This Fosmon product includes a limited lifetime warranty.
www.fosmon.com
support@fosmon.com
© 2018 Fosmon Technology All rights reserved.
Recycling the Product
To dispose this product properly, please follow
the recycling process regulated in your area.
Please visit our Fosmon website for more details.
DO NOT RETURN THE PRODUCT
There are good days and there are bad days. It is our BAD if the
product is not working, or if you are not happy with it.
GIVE US A CHANCE and WE WILL MAKE IT RIGHT.
1-833-3-Fosmon (833-336-7666)
(612) 435-7508
support@fosmon.com
PLEASE
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Loading...