Foshan Samyoo Electronic SPS807W User Manual

Download

ＫＯＮＦＯＲ

ＳＰＳ－８０７Ｗ

User Manual

Ultrasonic Mist Humidiﬁer

Catalog

Attentions 1-2

Attentions & Working Principle and Characteristics 2

Humidity introduction and function 3

Operating steps 4-6

Connect to mobile client 6-8

Maintenance Instruction 9

Trouble Shooting Guide 10

Attentions

Thank you for purchasing your new Ultrasonic Humidiﬁer.

The humidiﬁer helps you to restore an appropriate level of humidity and eliminate the discomfort associated with dry air. We wish you many years of healthy indoor air with this eﬃcient and eﬀective product.

We recommend you spend some time reading this instruction manual in order to fully understand all the operational features it oﬀers.

* Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Warning: Please be aware of the following points or you might be in danger of high voltage charges or burn your body.

1). Never disassemble the base unit without consulting qualiﬁed personnel.

2). If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiﬁed persons in order to avoid a hazard.

3). Do not add detergents, chemical solutions which are not made by our company into the unit.

4). Unplug appliance during ﬁlling, cleaning and maintenance.

5). Keep detergents and chemical solutions away from children.

6). Do not change attachment without deﬁnitive permission from our company otherwise you might cause a hazard.

7). If any abnormal smell during normal operation, please switch oﬀ and disconnect power supply and have qualiﬁed personnel amend.

8). If when cleaning with water, detergents & chemical solutions splash into mouth & eyes, consult a doctor to refrain from serious hazard.

9). Never touch water in the water basin & components in the water when the unit is in function.

10). Never switch on when there is no water in the water basin.

11). Never scrape Transducer cpl on your own.

12). Never clean Transducer cpl with detergents or chemical solutions that are not made by our company.

13). Never let water splash into inner base unit to avoid components damage.

14). Care should be taken when using the appliance due to emission of hot water vapor.

Attentions & Working Principle and Characteristics

15). Before cleaning and maintenance, the appliance must be disconnected from the power supply.

16). Prior to cleaning or other maintenance, the appliance must be disconnected from the supply

mains.

17). This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children without supervision.

18). Children should be supervised to ensure that they do not play with the appliance.

19). Indoor use only.

Working Principle

Ultrasonic Humidiﬁer uses the ultrasonic high-frequency oscillator to break up water into tiny water particles with the diameter of about 1-5um.The ventilation system blows out this water into the dry air where they evaporate to give the required humidity. The clearly visible smooth and even fog can be seen out of the unit.

Features

• High eﬃcient in humidiﬁcation with large output.

• Low energy consumption, save 85-90 percent of electricity than normal stream humidiﬁer.

• Long lifetime.

• Automatic control of humidity level, lack-of-water security protection.

• Heating Function: Touch the Heating symbol to make warm mist. Press again to stop the heating function.

• Plasma: Touch the Plasma symbol of Plasma to spread a number of Plasma elements. Press again to stop the Plasma function.

• Base with tray for the felt, to wet it with aromatic oil.

Humidity Introduction and Function

Correct Humidity Level

What exactly is relative humidity: Relative humidity is the amount of water vapor in the air, expressed as a percentage of the maximum amount that the air could hold at the given temperature.. We normally mark it with ％ RH, like 45％RH. Atomosphereic air always contains water vapor, the percentage of which depends on the meterological conditions. The higher the temperature is the more the air keeps water vapor. Therefore, we use the concept of “relative humidity”. When the cold air is heated up to the comfort temperature in winter, the relative percentage of the water vapor falls which means the relative humidity drops. In order to keep a comfortable and health environment at home, we need some artiﬁcial addition of water or water vapor to the room air- that’s air humidiﬁcation.

Ideal relative humidity levels under diﬀerent situations:

(The most comfortable RH for human being 45-65％RH)

•

Ideal RH for prophylactic and curative purpose: 40-55％RH

•

Computer and telecom apparatuses: 45-60％RH Furniture and musical instruments: 40-60％RH

•

Functions

1: Relative Humidity

A：The percentage of water mist in a given space with a given air temperature is named as relative

humidity, usually marked as %RH, i.e. 45%RH. The air contains water mist more or less. The proportion of water mist to the air varies according to diﬀerent air temperatures. The higher the temperature, the more water mist inhaled in the air.

In the winter, the cold air outside enters the room and becomes warmer by the higher temperature in

B：

the room. As a result, the relative humidity decreases. If you want to keep the healthy environmental humidity, we need to increase the mist volume in the air. The humidiﬁer can do that for us.

C：

Relative humidity in diﬀerent environments suitable for people:

Museum, exhibition hall, and library：40-50%RH Room with computer, experiment equipments：45-60%RH

Bedroom, living room：45-64%RH

Patient’s room：40-55RH Room with piano：40-60%RH

•

Library art gallery and museums: 40-60％RH Library art gallery and museums: 40-60％RH

•

2: Water ﬁlter

A：

Cation exchange resin ﬁlter can soften the hard water.

B：

Cation exchange resin ﬁlter demineralize in the water.

Operating Steps

Operation Instruction

First Operation, put unit in the room temperature for half of an hour before running. It is recommended to use the unit under temperature of 20 degree C, relative humidity less than 80％RH. Use clear water not over 40 degree C Check the water basin, make sure it is clear.

INSTRUCTIONS FOR USAGE

2. Fill the water into the water tank, and then tighten the tank cover. 1. Put the machine on a ﬂat surface.

Temperature Humidity

3. Put the water tank on the main base.

4. Check if the rated voltage meets the input voltage, and plug into the socket. Then display shows the current temperature and humidity.

Operating Steps

5. Touch the symbol POWER “ ” on the machine; the background LED light will be on. The machine will begin to work in AUTO mode. Display shows AUTO symbol. After 15 seconds without any operation, the display will become dim, press any key except power key to wake up the display.

Temperature of the air, degrees Celsius

6. Touch the symbol ANION “ ” the anion generator works. On the LED display, it shows the shape of anion “ ” . Touch again to stop the function.

7. Touch the symbol HEATING “ ” the warm mist will come out after 10~15 minutes. On the LED display, it shows the same symbol “ ” . Touch again to stop the function. Mist will become cool.

8. Constant humidity: Before you touch the symbol HUMIDITY “ ” , LED display shows the current humidity. You may set the humidity arranged from 30%RH to 75%RH. Touch once, AUTO mode is cancelled, it will increase by 5%RH. When it reaches 75%RH, touch again, it will show “Co” and ﬂash for 3 seconds to exit humidity setting function. After you set the expected humidity, the machine will keep the memory and conﬁrm after 5 seconds. 5 seconds later, the symbol %RH will blink and LED display shows the current humidity. Touch again, it shows the expected humidity setting. If the expected humidity is less than the current humidity, the machine will be in sleeping state. But if the expected humidity is 3% higher than the current humidity, the humidify function will work. Mist output speed cannot be set during the constant humidity mode. Long-press the symbol “ ” or “ ” , to cancel auto humidity, but enter to AUTO mode.

9. Touch the symbol MODE “ ” , baby mode will be turn on (keep constant humidity at 55% with warm mist and plasma turn on). In baby mode,mist output speed cannot be set. Press symbol MODE “ ” again to enter auto mode. Press MODE “ ” for two seconds to enter sleep mode. In sleep mode, display and water tank indication light will turn oﬀ and “ ” will be turn on. Humidiﬁer will keep running. Touch any button to cancel sleep mode and display will turn on.

10. Timer setting: There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch the symbol TIMER “ ” , the LED display will show the desired setting timer. Touch till “Co” display on the LED, timer setting is cancelled. The timer shows the rest operation time and decreases by 1 hours, i.e., if the timer is set at 12 hours, LED display shows 11 after one hour. To know what time have been set, just to touch TIMER symbol. Touch again, to set timer again.

11. Auto Shut-Oﬀ: Once the water in the basin is too little to keep the machine working, the machine will automatically stop working. LED shows the shape of lack of water “ ” . Reﬁll the water, and the machine will restart. If don’t reﬁll water within 15 minutes, the machine will automatically power oﬀ.

≤19

65206021582257

55Humidity(%)

2453255026

323533

303829

353134

3630≥37

Operating Steps & Connect To Mobile Client

12. Slide the symbol MAX-MIN “ ” , AUTO mode is cancelled and the mist output is in the ﬁrst speed. You may select 7 desired levels of mist volume. The corresponding strip symbol will appear on the display. 5 seconds after setting mist output speed, the current room humidity will appear on the display as well. On the remote control, just to press symbol “ ” to select mist output level and AUTO mode in diﬀerent times.

13. Auto Shut-Oﬀ: Once the water in the basin is too little to keep the machine working, the machine will automatically stop working. LED shows the shape of lack of water “ ” . Reﬁll the water, and the machine will restart. If don’t reﬁll water within 15 minutes, the machine will automatically power oﬀ.

14. On the remote controller, the related symbol controls the corresponding function.

15. No matter in any working mode, if no any operation in about 15 seconds, the display will turn dim.

Operation steps

• Take the water tank out of the unit, open the water tank cover and ﬁll the tank with clear water. Close the cover and put the tank onto the base unit carefully.

• Put the nozzle into the socket on top of the water tank.

• Connect the power supply, switch on the unit (NEVER RUN THE UNIT WHEN THERE IS NO WATER IN

WATER BASIN), the main connection lamp will on. The unit will begin working.

Connect To The Mobile Client

1. Conﬁgure the network.

2. Scan the QR code below to download the APP, or search for “ProscenicHome"

in the APP store to download the APP.

——Quick Connect mode

3. In the power-on state, long press the key “ ” 3 seconds until the WiFi indicator “ ” ﬂashes quickly.

Connect To Mobile Client

Add device

4. APP add device: turn on the APP, select add humidiﬁer device and conﬁrm WiFi indicator “ ” ﬂash.

Add device

Conﬁrmation indicator

5. erform network conﬁguration. According to the APP page prompt, select and enter the WiFi password to

make the device enter the connection state and wait for the distribution

network to complete.

* Note: the host does not support 5.8g band WiFi network.

Connect to the mobile client

1. Connect your phone to WiFi, scan the QR code below, or search for “ProscenicHome” in the app store to download the app.

——Hotspot Mode

Change network

conﬁrm

2. In the power-on state, long press the key “ ” 66 seconds until the WiFi indicator “ ” Slow ﬂash.

Connect To Mobile Client & Parameters

Add a Device

AP mode

make sure the WiFi indicator flashes slowly

3. Add a humidiﬁer device to the app, switch to the hotspot mode, and conﬁrm that the WiFi indicator is in a slow ﬂashing state.

5. According to the APP interface prompt, turn on“Phone Settings - Wireless LAN(WiFi)”, select “Proscenic-xxxx” network connection and return to APP. Perform network conﬁguration and wait for the distribution network to complete.

* Note: the host does not support 5.8g band WiFi network.

TECHNICAL DATA

Please select the purchased device

LDS-xxxx

807C

H500

H600

Click or pull up to load more

Please select the p

WLAN

Setting

WLAN

807C

AVAILABLE NETWORKS

XXXXXXXX

Network Conﬁguration

807C

......

Setting

WLAN

807C

AVAILABLE NETWORKS

XXXXXXXX

make sure the WiFi indicator flashes slowly

indicator flashes slowly

WLAN

• Model: SPS-807W

• Power supply: 110-120V 50/60Hz

• Heating power: 80W

• Humidify power: 30W

Add a Device AP mode

4. According to the prompt of the APP interface, select WiFi and enter the password.

Device Choice

SmartLife-XXXX

807C

Cancel Refresh

Device Choice

SmartLife-XXXX

807C

Cancel Refresh

• Total power: 110W

• Water tank capacity: 5.3L(1.4gal)

• Evaporation Rate: ≥300mL/h

• Noise level: ≤35dB(A)

Maintenance Instruction

Maintenance

In a case when the water is hard which means water contains too much calcium and magnesium, it can cause a “white powder” problem and leave heavy scales on the surface of water basin, transducer and inner surface of the water tank. Scales on the surface of transducer will let the unit work improperly.

We recommend

1). Use cold boiled water or distilled water.

2). Clean the transducer, water tank and basin unit every week.

3) .Change the water in water tank more often to keep it fresh.

4) .Make sure to pull out the water from the water tank and dry the water basin before you store the unit unused for a long period of time.

5).Clean the whole unit and make sure that all parts of the unit are dried completely before unused for longer period of time.

How to clean the transducer

1). Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5 minutes.

2). Brush oﬀ the scale from the surface.

3). Rinse the transducer with clean water.

How to clean the basin unit

1). Clean the water basin with soft cloth and the cleaning abluent if there is scale in it.

2). If the scale is covered on the security switch, drop the cleaning abluent on the scale and clean it out

with the brush.

3). Rinse the water basin with clean water.

Trouble Shooting Guide

If any trouble is found in normal operation, please kindly refer to the following points:

Trouble Possible reasons Solution

Power lamp oﬀ, does not work No power supply Connect power supply, switch on

Power lamp on, no mist outlet

with wind

Abnormal smell mist

Power lamp on, unit doesn’t work Too much water in the water basin

Mist fog is too low

Abnormal noise

Mist fog coming out from around

nozzle

DISPOSAL

Do not dispose this product as unsorted municipal waste, collection of such waste separately for special treatment is necessary.

1. No water in water tank

2. Security switch is too loose

1. New unit

2. Dirty water or water sitting too long

1. Too much scale in the water basin

2. Water is too dirty or water kept too

long in the tank

1. Resonant in water tank when

water is too low

2. Unit is on a unstable surface

There are apertures between the nozzle and water tank

1. Fill water into water tank

2. Tighten the switch

1. Take out water tank, open cover, let it stay 12 hours in cool position

2. Clean water tank, ﬁll with clear water

Pull out same water from the water

basin, close the cover of water tank tightly

1. Clean transducer

2. Clean water tank, change to fresh

clear water

1. Fill water into water tank

2. Move the unit to a stable ﬂat surface

Dip the nozzle in water for a while and then ﬁx it to the socket on

water tank

Ａｄｄ　：

ＫＯＮＦＯＲ

Ｆｏｓｈａｎ　Ｓａｍｙｏｏ　Ｅｌｅｃｔｒｏｎｉｃ　Ｃｏ．，ＬｔｄＡｄｄ　：　Ｊｉａｎｇｃｕｎ　Ｉｎｄｕｓｔｒｉａｌ　Ｚｏｎｅ　，Ｌｅｌｉｕ　，Ｓｈｕｎｄｅ　Ｆｏｓｈａｎ，　Ｇｕｇｎａｇｄｏｎｇ　，　Ｐ．Ｒ．ＣｈｉｎａＴｅｌ　：０７５７－２８６０１７０１Ｆａｘ　：０７５７－２８６０１７１１

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving an　 tenna.

Increase the separation between the equipment and receiver.　

Connect the equipment into an outlet on a circuit different from that to which the 　

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.　

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Foshan Samyoo Electronic SPS807W User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual