Foscam C Lite Quick Installation Manual

Quick Installation Guide

V1.0

EQC00006

2 Hardware Introduction1 Instructions

Note:

If your device fails to connect to the Wi-Fi using the
Setup Wizard, you can also use WPS mode connection.
Please refer to the User Manual on the Foscam website
at http://www.foscam.com.

Package Contents

Model: C1 Lite

Quick Installation Guide

Warranty Card

IP Camera

AC Adapter

USB Power Cable

Quick Installation Guide

Model: C1 Lite

You can add the Foscam camera using a smartphone.

4 Wireless Connection

Micro SD Card Slot

Lens

Microphone

WPS/Reset

Power

EZLink

WLAN:

WLAN Password:

Connect your phone to Wi-Fi and input Wi-Fi
password for camera to connect.

NPU5YHSZSADVC59D111ABZZZ

doc

QR Code UID

CONNECT

EZLink

Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.

Album

Scan

Tap here

Tap here

Tap here

Scan the
QR code

The camera will
play a sound
“Wireless
Connection
Succeed” .

Enter your Wi-Fi
password.

Tap ‘+’ to add new camera

Add New Camera

My Cameras

Tap to scan QR Code

Please scan the QR code on

your camera to add.

Setup Wizard

轻触扫描二维码

√

Connection succeeded！
Tap the camera in the list to
watch live video.

Setup Wizard

Router

WiFi

SoftAP

Power light

Network light

Security Warning

Please change the password of your camera regularly,
and use the combination of numbers, letters and special
characters.

We recommend you to update your camera to the latest
firmware every three months, in order to ensure the
safety of your camera and have a better product
experience.

Please keep the username and password of your camera
safe, and do not tell them to others.

3 Download APP

To install the Foscam APP on your smartphone, you can
choose either of the following methods:

Before you continue, please note:

Make sure your wireless router is enabled DHCP, and
connected to internet.

Make sure your smartphone is connected to your
wireless router and located near the camera.

Foscam

If you have a QR Code APP on your smartphone, scan
the code below.

Scan QR code

You can search the term “Foscam” directly on the APP
Store or Google Play Store. Then find the APP that
appears with the same icon as shown above, and install
it to your smartphone.

1. Connect the camera with power and wait for a moment,

until the camera plays a sound “Hello, Foscam”.

2. Make sure your smartphone is connected to your

wireless router.

3. Run the Foscam APP on your smartphone, register a

Foscam Cloud account then log in. After the camera
plays the sound ”Ready for WiFi configuration”, please
follow the steps below to add your camera.

Download from App store

7 Important Notice

Camera Username / Password

The camera username / password are used to access and

manage your camera on computer. They can improve the

security of your camera significantly.

If you have forgotten either of them, you need to press and hold

the "Reset" button on the camera powered on. After hearing the

voice prompt, release the button. The camera will automatically

reboot and the default settings will be restored. Then the

default username / password become admin / (blank).

After restoring to the factory default settings, you need to delete

the camera from Foscam APP, and then add it again.

Foscam cloud service Account / Password

Foscam cloud service account / password is used to access

Foscam APP or Foscam cloud service website, you can register

the account / password on one of them.

Support cloud storage, NVR(Network Video Recorder), SD card.

If you hope to store the video for a whole day, it is suggested to

use the Foscam NVR.

Storage Media

Please check whether the power supply is matched before using

the camera.

Please fix the camera and brackets with the locating screws to

avoid falling down.

To avoid the risk of fire or electric shock, please keep your camera

in dry place, and do not let the camera be affected with damp.

The camera is electronic equipment, please keep it away from

children.

Change your default port to a greater range to avoid hackers’

invasion.

Check the logs of your Foscam cameras often. Foscam Cameras

have embedded logs reminding you which IP addresses are

accessing the camera.

Safety Tips

You can upgrade the firmware on Foscam APP with new feature

"One-key Online Upgrade"(Enter Foscam APP, select “Settings >

Firmware Upgrade”).

You also can download the latest version to upgrade your

camera from office website http://www.foscam.com (Access the

website, select “Support > Firmware Downloads”).

Firmware Upgrade

8 Technical Support

ShenZhen Foscam Intelligent Technology Co., Ltd

www.foscam.com

CE Certificate Website:
http://www.foscam.com/company/ce-certificate.html

If you have any problems with your Foscam IP Camera, please

contact the Foscam reseller you purchased from. If your problem

still can’t be solved, please send your e-mail to the technical

support team of Foscam headquarter at [e-mail].

Your valuable comments and suggestions on improving Foscam

products are welcomed!

6 Hardware Installation

1. Rotate the base of the camera until points a and b are
aligned, this allows for the mounting plate to be
removed.

2. Install the mounting plate on a wall or ceiling with

supplied fixing screws.

3. Align points a and b to insert the camera base to the
mounting plate. Rotate so that points a and b are no
longer aligned, this attaches the camera securely to the
base.

5 Access the IP Camera

Foscam Cloud Service

Foscam Cloud

If you want to manage your camera more professionally,
we suggest you to access your camera via browser. You can
download the ”Equipment Search Tool” from

http://www.foscam.com to your computer, then access
the camera directly via the search tool.

You can access the camera via Foscam cloud website:

www.myfoscam.com.

You can enjoy good experience on this website as below.

It’s quite easy to remotely access and manage all your IP
cameras.

You can enjoy the latest feature firstly on the website,
for example cloud storage, video sharing, etc.

If you have already registered an account on Foscam APP,
you can directly use this account to log in.

You can use Foscam APP to view the video on your camera
anytime, anywhere.

Once succeeding in connecting your camera, you can
access it via three different ways (Foscam cloud website,
APP on smartphone, Web UI).

Note:

You can experience new features, including EZLink, Online-Up­date, Message Push, etc., ONLY on “Foscam” APP. Any other
third-party APP, other than “Foscam”, can’t support all these
new features.

Foscam APP

Web UI

a

a

b

b