User manual
HD Digital Meter
Satellite & Terrestrial
STM-6000
STM
6000
2 EN COMB-Mete
Table of Content
s
Description.......................................................................................................4
Safety instructions ..........................................................................................4
Safety of persons...............................................................................................4
General information...........................................................................................5
Appropriate Usage ..........................................................................................6
Delivery range..................................................................................................6
Device overview...............................................................................................7
Start of operation.............................................................................................9
Battery ...............................................................................................................9
Switch-on the Device.........................................................................................9
Lithium-ions-battery......................................................................................10
Charging the battery........................................................................................10
Storing of the batteries ....................................................................................10
System setting ...............................................................................................11
Language Setup..............................................................................................11
INFO...................................................... .........................................................12
Factory Default.................................................................................................12
Factory reset ..................................................................................................14
Satellite finding..............................................................................................15
Finding channels manual.................................................................................16
Lining satellite aerial up...................................................................................16
T/T2 finding…………………………………………………………………………..18
Finding channels manual..................................................................................19
Lining T2 antenna up.......................................................................................20
ST
M6000
COMBOM
eter
3 | EN
Satel
l
ite settin
g
.............................................................................................
22
USB...............................................................................................................25
Updating and Backup Data..................................................... .....................25
Angle calculation.........................................................................................28
S
pectru
m Analyzer
.......................................................................................29
Technical specifications..............................................................................31
Warrenty ........................................................................................................33
STM
6000
4 EN
CO
MBO
-Meter
Descriptio
n
The Satellite meter is a handy digital antenna measuring device for an quick
and easy alignment of satellite antennas. If a satellite is found, the m
eter
shows it on the display and emits a audible signal. Signal strength and quality
are displayed as numerical values and bar graphs. Another measurem
ent
value is the forward error correction (FEC) and the bit error rate (BER). I
n
addition, the picture quality can be revised on the high-resoluted 3.5-inch
TFTLCD screen. Many satellites are pre-programmed in order to an quick
antenna adjustm
ent.
The scope of supply contains, among the charger, a USB cable which allow
s
you to update software
.
A carrying case serves as protection and for the transport. It cares f
or better
readability of the display at sunshin
e.
Safety instructi
ons
Attention!
Please read the safety instructions carefully before operati
ng
the devic
e.
Please follow all warnings and instructions on the equipm
ent
and in the operating manual
.
Safety of pers
ons
Ensure that nobody can be hurt by falling tools or parts of the satelli
te
antenna during the adjustment and installation of the antenna. For your o
wn
security use a rope on sloping roofs
.
STM
6000
COMBOM
eter 5 |
EN
General informatio
n
Attention!
The devise should only be operated with the supplied
AC
adapter at the mains
.
Do not open the meter or the included AC adapter. There is
danger of life through electric shock!
Wrong usage of the ports can lead to the destruction of the
measuring devic
e.
Proceed carefully with the measuring devic
e:
·
Avoid low temperatures (below 0 °C) or to high humidity
.
·
The TFT display can be damaged by mechanical impacts
.
·
Avoid excessive input voltages
.
Do not operate with the devic
e:
·
if it has visible dam
age,
·
if there are loose parts in the devic
e,
·
if the device was located outdoors or in damp rooms a extended period of
tim
e.
STM
6000
6 EN
COMBO-Meter
Appropriate Us
age
The measuring device meter was developed to measure signals o
f
digital satellite antennas and satellite systems. It is exclusively for this purpos
e
and should only be used for this purpose. Use the equipment only f
or the
purpose, which is described in this manual
.
Follow all information in this manual, particularly the safety instructions
on
page
5.
Any other usage is rated as not properly and can result in damage or even
injury
.
There will be no liability for damages caused by a non-intended use.
Delivery ran
ge
Please check if the delivery is compl
ete.
Included in delivery:
·
device m
eter,
·
a carrying b
ag ,
·
an extern c
harger,
·
an power cabl
e.
·
an user manual
,
If the delivery should be incomplete, contact your specialist deal
er
STM6000
COMBOM
eter
7
| EN
Device overview
Figure 1: Front of the met
er
ST
M6000
8 | EN
COMBO-Meter
No. Description
1 LNB-IN Digital satellite signal inpu
t
2 LC-Display Display of the TV picture, the menu and the
measured values
3 POWER-LED
Display of the energy state:
Operati
on:
red: the measuring devise is switched on
.
Off: the measuring devise is switched off
.
In charge:
Green: The battery is charged
Red: The battery is full charged
4 LOCK-LED LED lights when a signal is received.
5 FUNCTION
keys
F1: shortcut key
F2: shortcut key
F3: shortcut key
F4: shortcut key
5.1 22K/13V/18V
-LEDs
Lights if 22K/13V/18V signals are received
6
6.1
Navigationcross
OK - button
Navigation through menus
,
switching programs ▲, ▼
volume control ◄ , ►
OK button: confirmation of a selection
7 Numeric keys Direct enter of numbers
8 FIND-button FIND menu: for a quick and easy alignment of a
satellite antenna
9 Menu-button Display the main menu
10 EXIT-button Leave the current menu, cancel operation
11 ANGLE-
button
Display the calculation menu
12 SYSTEM-
button
Configuration of all system param
eter.
Display current software version.
13 POWER-
button
Switch devise on/o
ff
14 SCAN-button Display the auto scan men
u
15 AC adapte
r
port
Low volt port – for power supply connection
16 USB-Port USB port for PC connectio
n
17 SPTRUM
button
Display the menu of spectrum
STM6000
COMBOM
eter 9 | EN
Start of operati
on
Battery
Before the first operation with the measuring device charge the battery
completely. (see also chapter “Lithium-Ion battery” on page
11).
Load the accumulator during the first loading procedure at least
5
hours
.
The maximum battery charging time is approximately 12 hours
.
Switch-on the Devi
ce
ð Press 2 seconds the red power button on the m
eter.
ST
M6000
10 |
EN
COMBO-Meter
Lithium-ions-battery
Explosion danger!
Never the two poles (+ and -) connect with each other!
Attention!
Storing or operating accumulator no more than 40° C.
Not burning or damaging accumul
ator.
Not taking accumulator to contact with wat
er.
Charging the battery
The maximum battery charging time is approximately 12 hours
..
A charging circuit in the measuring device provides an optimal charge of
the
battery. The device is charged if it is switched off
.
è Turn the device off, if it is not already off
.
è Connect the Euro-main cable with the external AC ada
pter.
è Connect the external AC adapter to the power gri
d.
è Connect the AC adapter to the low-voltage port at the bottom
.
è The battery is charged as soon as you connect the AC adapter to
the
m
eter
The Power-LED shows the battery status
:
·
green: the battery is char
ged
·
red: the battery is completely load
ed
Storing of the batte
ries
Storing the batteries between 0° Celsius and 40° Celsius
.
Loading the accumulator at a longer storage every two weeks to
avoid a depth disch
arge.
Loading...