FULL HD Satellite Finder Meter
SM-8800
HD DVB-S2/S +Spectrum
Meter
User manual
SM8800
2 |ENG SAT-Meter
Table of Contents
Description....................................................................................................... 3
Safety instructions........................................................................................... 3
Safety of persons............................................................................................... 3
General information.......................................................................................... 4
Appropriate Usage.......................................................................................... 4
Delivery range.................................................................................................4
Device overview............................................................................................... 5
Start of operation.............................................................................................7
Battery.............................................................................................................. 7
Switch-on the Device........................................................................................ 7
Lithium-ions-battery....................................................................................... 8
Charging the battery.......................................................................................... 8
Storing of the batteries...................................................................................... 8
System setting.................................................................................................. 9
Language Setup.................................................................................................9
Factory Default.................................................................................................10
Factory reset................................................................................................. ...10
Factory reset.................................................................................................. 10
Satellite finding ............................................................................................. 11
Finding channels manual................................................................................11
Lining satellite aerial up.................................................................................. 12
Satellite setting.............................................................................................. 12
Dish Setup .... ..............................................................................................13
Satellite setup ....................................... ..........................................................14
Channel Setup--------------------------------------------------------------------------14
DisEqc1.2-------------------------------------------------------------------------------14
USB--------------------------------------------------------------------------------------15
File Viewer----------------------------------------------------------------------------------16
Updating-------------------------------------------------------------------------------------17
Backup Data---------------------------------------------------------------------------------17
SM8800
3 |ENG SAT-Meter
Angle calculation........................................................................................... 17
Spectrum........................................................................................................ 17
Av Setup......................................................................................................... 17
Disposal.............................................................................................. ............20
Technical specifications...................................................................... ..........22
Warrenty........................................................................................... ........... .23
Description
The Satellite meter is a handy digital antenna measuring device for an quick
and easy alignment of satellite antennas. If a satellite is found, the meter
shows it on the display and emits a audible signal. Signal strength and quality
are displayed as numerical values and bar graphs. Another measurement
value is the forward error correction (FEC) and the bit error rate (BER),
Modulation error rate(MER),In addition, the picture quality can be revised on the
high-resoluted 4.3-inch TFT LCD screen. Many satellites are pre-programmed in
order to an quick antenna adjustment.
The scope of supply contains, among the charger, an USB connector which allows
you to update software.
A carrying case serves as protection and for the transport. It cares for better
readability of the display at sunshine.
Safety instructions
Attention!
Please read the safety instructions carefully before operating
the device.
Please follow all warnings and instructions on the equipment and
in the operating manual.
Safety of persons
Ensure that nobody can be hurt by falling tools or parts of the satellite
antenna during the adjustment and installation of the antenna. For your own
SM8800
4 |ENG SAT-Meter
security use a rope on sloping roofs.
General information
Attention!
The devise should only be operated with the supplied AC
adapter at the mains.
Do not open the meter or the included AC adapter. There is
danger of life through electric shock!
Wrong usage of the ports can lead to the destruction of the
measuring device.
Proceed carefully with the measuring device:
Avoid low temperatures (below 0 °C) or to high humidity.
The TFT display can be damaged by mechanical impacts.
Avoid excessive input voltages.
Do not operate with the device:
if it has visible damage,
if there are loose parts in the device,
if the device was located outdoors or in damp rooms a extended period of time.
Appropriate Usage
The measuring device meter was developed to measure signals of
digital satellite antennas and satellite systems. It is exclusively for this purpose
and should only be used for this purpose. Use the equipment only for the
purpose, which is described in this manual.
Follow all information in this manual, particularly the safety instructions on
page 4
Any other usage is rated as not properly and can result in damage or even injury.
There will be no liability for damages caused by a non-intended use.
Delivery range
Please check if the delivery is complete.
Included in delivery:
Tool case
SM8800
5 |ENG SAT-Meter
device meter
a carrying bag
an extern charger
an power cable
AV cable
F connnector
an user manual CD
If the delivery should be incomplete, contact your specialist dealer
Device overview
LNB IN : Connect this port to the satellite atn cable
RF IN: Not connect
DC 14V: Power supply port
AV OUT: Connect this port to TV’S CVBS via AV cable
HDMI: Connect this port to TV HDMI port via HDMI cable
AV IN: Connect the port to other’s CVBS Cable
SM8800
6 |ENG SAT-Meter
Figure: Front of the meter
No. Description
1 LNB1-IN
LNB2-IN
Digital satellite signal input
2 LC-Display
Display of the TV picture, the menu and the
measured values
3 POWER-LED
Display of the energy state:
Operation:
red: the measuring devise is switched on.
Off: the measuring devise is swi
tched off.
In charge:
Green: The battery is charged
Red: The battery is full charged
4
LOCK-LED
LED lights when a signal is received.
5
FUNCTION keys
F1: shortcut key
F2: shortcut key
F3: shortcut key
F4: shortcut key
SM8800
7 |ENG SAT-Meter
5.1
22K/13V/18V-L
EDs
Lights if 22K/13V/18V signals are received
6
6.1
Navigation-cross
OK
Navigation through menus,
switching programs ▲, ▼
volume control ◄, ►
OK button: confirmation of a selection
7
Numeric keys
Direct enter of numbers
8
FIND
FIND menu: for a quick and easy alignment of
a satellite antenna
9
Menu
Display the main menu
10
AV
Switch AV input or out put setup
11
ANGLE
Display the calculation menu
12
SYSTEM
Configuration of all system parameter.
Display current AV setup.
13
POWER
Switch on the power on at 2-3 second
14
SCAN
Display the auto scan menu
15
OFF
Switch off the power
16
T/R
Switch the TV or Radio program display
17
SPTRUM
Display the menu of spectrum (for spectrum
meter only)
Start of operation
Battery
Before the first operation with the measuring device charge the battery completely. (see also
chapter “Lithium-Ion battery” on page 10).
Load the accumulator during the first loading procedure at least 5
hours.
The maximum battery charging time is approximately 12 hours.
Switch-on the Device
ð Press 2-3 seconds the red power button on the meter.
Loading...