Forum Lighting Solutions ZN-41733, ZN-41737, ZN-41736, ZN-41735, ZN-41732 Installation Instructions
...Page 1
LAPIN SERIES LIGHTS
Please read these instructions before commencing installation & retain them for future reference.
INS ZN 41732 41733 41734 41735 41736 41737 41739 - A
Important information
Plug into a suitable IP rated socket or plug in the driver indoors.
• T hese products are designed for connection to a 220-240V mains supply.
• W e will not accept responsibility for any claims arising from a poor installation.
Installation Procedure
• Always switch o mains supply before servicing.
• Ensure 220-240V supply voltage.
FFix the Lights in a suitable position. see spacings shown below for info.
•
• The Lights are suitable for external use, but must not be submerged in water.
•
Plug into a suitable IP rated socket or plug in the driver indoors.
• Ensure wiring is located so that it doesn’t pose a trip hazard.
SPECIFICATIONS : Pathway lights
1.2m 4m to 1st head 1m 1m 1m 1m 1m 1m 1m
1m
Connecting the sets:
Unscrew the end cap, push the 2 connectors together, screw the connector ring over the joint.
Up to a maximum of 8 lights (any type) plus a sensor, can be installed in series with the
supplied adapter.
SPECIFICATIONS : Garden spikes
1.2m 4m
1m
to 1st head 1m 1m 1m 1m 1m 1m 1m
Input: 220-240 V/AC 50/60 Hz
Output Voltage: DC 24V
Power: 4x3W=12W Total per kit
Adapter: DC 24V,1.5A,36W
6.2 meters lead-in to the first light
2 meters cable between lights
Lamp body material: ABS
Colour Temperature: 4000K
Luminous Flux: 1000lm
Beam angle: 120 degrees
IP Rating: IP65
Working Temperature: -25℃-50℃
Input: 220-240 V/AC 50/60 Hz
Output Voltage: DC 24V
Power: 4x3W=12W Total per kit
Adapter: DC 24V,1.5A,36W
6.2 meters lead-in to the first light
2 meters cable between lights
Lamp body material: ABS
Colour Temperature: 4000K
Luminous Flux: 960lm
Beam angle:60 degrees
IP Rating: IP65
Working Temperature: -25℃-50℃
Ground Mounting
① ②
Wall/Deck Mount
① ②
Page 2
SPECIFICATIONS : Recess deck lights
1.2m 4m to 1st head 1m 1m 1m 1m 1m 1m 1m
Input: 220-240 V/AC 50/60 Hz
1m
Wooden Deck Mount
Output Voltage: DC 24V
Power: 4x2W=8W Total per kit
Adapter: DC 24V,1.5A,36W
6.2 meters lead-in to the first light
2 meters cable between lights
Lamp body material: ABS
Colour Temperature: 4000K
Ground Mounting
Luminous Flux: 1000lm
Beam angle: 120 degrees
IP Rating: IP65
Working Temperature: -25℃-50℃
The size of the cut hole is: 38mm
SPECIFICATIONS : Add-in Photocell Sensor
Installation Procedure
• Always switch o mains supply before servicing.
•E nsure 220-240V supply voltage.
•C onnect the photo sensor in front of the first light.
•F ix the Photocell Sensor in a suitable position.
•The Photocell Sensor are suitable for external
use, but must not be submerged in water.
Sensor will activate when it goes dark and will
•
turn off at dawn. Ensure that the sensor area
is kept clean.
SPECIFICATIONS :
Input Voltage: DC 24V
Lamp body material: ABS
IP Rating: IP65
Working Temperature: -25℃-40℃
Power adapter is not included in the package
Ground Mounting
① ②
�M
self-adhesive
Wall Mount
① ②
③
Available kits and add-ons:
Garden spike kit - ZN 41732 (Driver + 4 Lights) Garden spike add-on - ZN 41733 (2 lights)
Pathway light kit - ZN 41734 (Driver + 4 Lights) Pathway light add-on - ZN 41735 (2 lights)
Recess deck light kit - ZN 41736 (Driver + 4 Lights) Recess deck light add-on - ZN 41737 (2 lights)
5m PVC cable extension - ZN 41738
Photocell - ZN 41739
HELPLINE
If you receive this item with parts broken or missing, please telephone:
0333 0050077
Please have ready your name, address, tel. no., product reference, where purchased
An answering service is in operation outside office hours and during busy periods.
We regret that we are unable to give advice on internal house wiring.
Cascade Holdings Ltd, Gorse Mill, Gorse Street, Chadderton, Oldham. OL9 9RJ
EU Authorised Representative: Authorised Rep Compliance,
Ground Floor, 71 Lower Baggot Street, Dublin, Ireland,
D02P593.
and parts required.
This product should be disposed
of responsibly at the end of its life.
Please recycle where facilities exist.
Check with your Local Authority
or retailer for recycling advice
(Waste Electrical and Electronic Equipment Directive)
v2
Loading...