FortiFone FF-60b
Bluetooth® Module
This document provides information about the FF-60b installation for the FON-550i.
Refer to the FON-550i User Guide for more information.
Package contents
The following items are included in your FF-60b package. Before installation, ensure that
you have the following package contents:
• FF-60b module with cover
• Install Guide
Before you start
Before installing the FF-60b module, unplug the power supply or PoE LAN cable.
Installation procedures
1. Remove the cap from the phone. 2. Remove the protective rubber cover from
the FF-60b. Insert the FF-60b into the slot
and push it down hard until the FF-60b is
firmly in place.
3. This is the front view of the phone after
the installation.
Important: If the FF-60b has been
correctly installed, the red LED on the
module will automatically turn on when
the phone is powered up.
Cap
Adding a Bluetooth headset for the first time
Pairing a Bluetooth headset
A Bluetooth headset must be paired with the FF-60b Bluetooth module before it can be
connected (activated). Up to five (5) headsets may be paired with the FON-550i at one time.
Only one headset can be used at a time. Once paired, the phone can be placed on and off
hook using a compatible Bluetooth headset.
To pair and connect a new headset with the FON-550i:
Copyright © 2015 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and
other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their
respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network
variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all
warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that
the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such
binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. In
no event does Fortinet make any commitment related to future deliverables, features or development, and circumstances may change such that any forward-looking statements herein are
not accurate. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer,
or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. Revision 2 — 201510
1. Press the button.
2. Press 3 to access the Phone Settings
menu.
3. Press 1 2 to access the Bluetooth menu.
4. Press 1 to access the Headset
Management menu.
5. Press the Search softkey. The phone will
search for nearby Bluetooth headsets.
6. Locate a Bluetooth headset from the list
of headsets using the Down softkey, then
press the Select softkey.
7. When the Enter PIN Code message
displays, input the PIN associated with
the headset and press the OK softkey. If
a valid PIN is entered, then it will display
the message Headset Connected.
Please refer to your headset’s User
Guide for the PIN code. The default is
usually 0000.
8. Press the
button to exit the
configuration session.
Bluetooth headset status indicators
The Bluetooth icon, indicates the optional Bluetooth module is properly installed with no headsets
paired to the phone. When blinking rapidly, the FON-550i is searching or attempting to pair with
aheadset.
The Bluetooth paired icon, indicates one or more (maximum 5) headsets are paired with the module
but none are active. When blinking rapidly, the FON-550i is attempting to pair or connect a headset.
The Bluetooth connected icon, indicates a headset is connected to the FON-550i. When blinking
rapidly, the FON-550i is searching or attempting to pair or disconnect a headset. When blinking
slowly, the Bluetooth headset is in use.
For additional information on using headsets with the FON-550i with the FF-60b Bluetooth module
installed, please read the FON-550i User Guide at http://docs.fortinet.com.
Loading...