Formfutura Premium ABS Technical
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
Premium ABS is our entry-level no-nonsense ABS filament, which is very impact resistant.
Even though Premium ABS might be our entry-level ABS filament, it still outperforms many other ABS type of 3D printer
filaments by far when it comes to printer friendliness and reduced warping. Premium ABS has a great thermal stability and
flowing behaviour, which is essential for 3D printing.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of dat a, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade pract ice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Izod Notched @23° C (73° F)
Mechanical
Impact strength
29 KJ/m²
ISO 180/A
Tensile modulus
Tensile strength
36 Mpa
ISO 527
Stress @ Yield 23° C
--Flexural modulus
± 2148 Mpa
-
-
Technical Data Sheet
Product name:
Premium ABS
Version:
v3
Water absorption
1.04%
ISO 62
Saturated at 23° C
Physical
Specific gravity
1.03 g/cc
ISO 1183
-
Melt flow rate
5.5 cm³/10min
ISO 1133
220° C/10Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
0.23%
ISO62
Equilibrium 23° C/50% RH
Hardness
71 Mpa
ISO 2039-1
Ball Indentation Hardness
Thermal
1860 Mpa
ISO 527
-
Elongation at break
9%
ISO 527
Nominal Strain at Break, 23° C
Flexural strength
± 65.7 Mpa
Print temperature
± 220 - 270° C
---
Melting termperature
± 145 ± 10° C
ISO 294
-
Viscat softening temp.
± 92° C
ISO 306
VST/A/50 (50° C/h, 10N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...