Formfutura AquaSolve - PVA User Manual
Formfutura BV CoC: 69099502 Tel: +31 (0)85 002 0881
Groenestraat 215 VAT: NL857733709B01 Email: info@formfutura.com
6531 HH Nijmegen EORI: NL857733709 Website: www.formfutura.com
The Netherlands
AquaSolve is a high-end cold water soluble PVA (PolyVinyl Alcohol ) type of 3D printer filament, which bonds very well to a
variety of (thermo)plastics – such as PLA, PETG, ABS, and more – that print within a similar temperature range. This makes
AquaSolve an excellent PVA support material for dual extrusion prints.
AquaSolve™ PVA has a limited smell during printing and is non-toxic and biodegradable once dissolved in water.
All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith,
believed reliable, but Formfutura assumes no liability and make s no warranties of any kind, express or implied, including, but not limite d to, those of title, merchantability, fitness for a
particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the
forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use
of all such information. Typical values are indicative only and are not to be construed as being binding specifications.
≥ 95%
± 0.10mm
HS Code
REACH compliant
RoHS certified
Charpy Notched @23° C (73° F)
Mechanical
Impact strength
1.6 KJ/m²
ISO 179
Tensile modulus
Tensile strength
78 Mpa
ISO 527
Stress @ Yield 23° C
--Flexural modulus
---
Technical Data Sheet
Product name:
AquaSolve™ - PVA
Version:
v3
Water absorption
---
Physical
Specific gravity
1.23 g/cc
ASTM D1505
-
Melt flow rate
14-20 g/10min
-
190° C/21.6Kg
Properties
Typical value
Test Method
Test condition
Moisture absorption
---
Hardness
---
Thermal
3860 Mpa
ISO 527
-
Elongation at break
9.90%
ISO 527
Nominal Strain at Break, 23° C
Flexural strength
-
Print temperature
± 180 - 205° C
---
Melting termperature
± 163
--Viscat softening temp.
± 60.2° C
ISO 306
VST/A/50 (50° C/h, 10N)
39169090
Yes
Yes
Product details, certifications and compliance
2.85mm
Optical
Haze
-
-
Diameter
Tolerance
Roundness
≥ 95%
± 0.05mm
1.75mm
-
Gloss
---
Transmittance
-
-
Loading...