Acadia Collection Gazebo
Model No. 088-1609-0
Assembly Instructions
Toll-free: 1-866-578-6569
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
Production Number:XXXXXXXX
3
Made in China
Imported for Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY
Table of Contents
Important Safety Instructions
3
3
4-9
10
Table of Contents
Important Safety Instructions
Part List
General Requirements
Assembly
Cleaning and Maintenance
Technical Data
Warranty
35
35
Warning!
35
11-34
To reduce the risk of serious injury, read the following safety instructions before
assembling and using the gazebo.
Caution! Always keep children under close supervision while they are playing around this product. Never leave
children unattended. Keep pets away while setting up the gazebo.
Caution! Check municipal by-laws prior to installing the gazebo.
• This product is intended for domestic outdoor use only.
• The product should be placed and assembled on flat, horizontal ground.
• Consult with your local governing authority/local municipal codes regarding installation of
temporary structures before assembly.
• Ensure there is enough clearance around the product. Before assembling the gazebo, make sure to leave a
distance of not less than 6’ (1.8 m) from any structures or obstructions, such as fences, garages,houses,
overhanging branches, laundry lines, or electrical wires.
• Anchor the gazebo to the ground with stakes for added safety. Stakes are provided to secure the gazebo to
the ground. If you wish to secure the gazebo to a concrete or wood surface, use anchors suited for these
surfaces (anchors not included). Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do
not have enough anchorage in these types of soil.
• If more than one gazebo is set up, keep a minimum distance of 10' (3 m) between the gazebos.
• Any assembly or maintenance of the product must be carried out by adults only.
• Make sure there is sufficient manpower when assembling or moving the product.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• C heck all nuts and bolts periodically for tightness. When required, tighten them.
• Repairing and replacing parts should be done by a qualified technician.
• ylno sesoprup edahsnus dna evitaroced rof dednetni si obezag sihT .
••Always disassemble the gazebo prior to experiencing heavy wind conditions, as it is not designed to withstand
harsh weather, including high wind, rain, and snow and might tip over and could cause injury to bystanders.
Do not hang any weights on the roof frame.
•
Do not climb onto the roof of the gazebo. Doing so may cause the gazebo to fall down, thereby resulting in
serious injury.
•
During snow days, remove the snow at the top when the snow is thicker than 4" (10 cm).
•
After a period of time, usually in 2–3 months, tighten all the bolts.
•
After a period of use, rinse the ash on the top of gazebo using water. Avoid using acid or alkali wash lotion.
•
After a few years, if the paint peels off, use paint of similar color. It is recommended to use outdoor paint.
•
If the gazebo will not be used for a long period of time (e.g. during winter time), disassemble and store it in a
clean, dry environment.
•
Retain the original packaging to store the gazebo.
4
8- -
5
Big Top Frame
-2
1
Big Top Bar - 2
Small Top Support Beam - 4
Small Top Connector -1
Top Roof Small Panel - 2
Small Top Cover
Top Roof Long Panel - 2
- 4
2
Beam Connector - 8
Post Connector - 4
Post - 4
Base Cover - 4
Short Beam - 2
I2
Long Beam - 2
Long Pipe 1-2
Arc Support - 8
Short Pipe 2 - 2
Short Pipe 1 - 2
Long Pipe 2 - 2
Slanting Bar Connector - 4
Lower Beam Connector - 8
Small Top Roof Cover - 1
Base
- 4
Upper Beam Connector - 12
Part List
Part List
P12119A01128
TM
6
8- -
7
Top Beam 1-4
Top Slanting Bar - 4
Long Side Left Roof Panel 1
Long Side Left Roof Panel 2-2
Long Side Right Roof Panel 2-2
-2
Long Side Right Roof Panel 1-2
Big Roof Panel Cover (Middle) - 4
Big Roof Panel Cover (Corner) 2-4
Long Side Left Roof Panel 3-2
Long Side Right Roof Panel 3-2
Short Side Roof Panel 1-2
I3
Short Side Left Roof Panel 2-2
Short Side Right Roof Panel 2-2
Short Side Left Roof Panel 3-2
Short Side Right Roof Panel 3-2
Big Roof Panel Cover (Corner) 1-4
Big Roof Top Beam (Short Side) 1-8
Big Roof Top Beam (Short Side) 2-2
Big Roof Top Beam (Short Side) 3-2
Big Roof Top Beam (Short Side) 4-2
Big Roof Top Beam (Short Side) 5-2
Big Roof Top Beam (Short Side) 6-4
Top Beam 2-4
Top Beam 3-4
Part List
Part List
TM
8
8- -
9
Big Roof Top Beam
(Long Side) 1-
Big Roof Top Beam
(Long Side) 2-2
Big Roof Top Beam
(Long Side) 3-2
Big Roof Top Beam
(Long Side) 4-2
Big Roof Top Beam
(Long Side) 5-2
Big Roof Top Beam
(Long Side) 6-4
5
6
-1
（ ） -
- 2
-
-
- 4
- 2
- 2
￠
-16
- 2
-2
-2
Small Roof Upper Short Side Beam -2
Small Roof Lower Short Side Beam -2
Small Roof Upper Long Side Beam -2
Small Roof Lower Long Side Beam -2
Part List
Part List
408+
10
1609-0
Caution!
•!Proper placement of the gazebo is essential. Do not place the gazebo underneath
electrical lines.
•!Keep children under close supervision while they are near this product. This product
contains small parts which can be swallowed by children.
•!Keep fingers away from places where they can be pinched or trapped.
•!Do not attempt to assemble the gazebo if any part is missing.
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-866-578-6569
If you have questions regarding your product, require warranty assistance,or have
damaged
or missing parts, please call our customer service toll-free helpline.
Contact us for assistance; we’re here to help.
IMPORTANT: Ple
ase read and understand this manual before any assembly. Before beginning the assembly of the
product, make sure all parts are available. Compare parts with package contents list. If any part is missing, or if
you have any questions, contact the service center at 1-866-578-6569 (toll-free).
Take all parts from the box and position them on a clean floor. Remove all packing materials and place them back
into the box. Do not dispose of the packing materials until assembly is complete. Read each step carefully before
beginning any assembly and make sure you understand each step.
Hammer Screwdriver Ladders (6' / 2 mtall) 4 people
11
Need ed for assembly:
（The following tooling not included
）
General requirements
4x 4x
4x
Assembly
STEP 1
16x
16x
TM
13
0
12
4x
4x
x
x
4x
2x
2x
6x
4x
16x
STEP 2
STEP 3
16x
40x
8x
TM
15
STEP 4
14
1609-0
4x
2x
6x
4x
16x
8x
40x
16x
STEP 5
16x
2x
16x
TM
16
17
STEP 6
1609-0
2x
16x
16x
STEP 7
8
K2
32x
32x
TM
18
19
STEP 8
1609-0
8x
8x
4x
8x
8x
STEP 9
8
x
16x
TM
20
21
1609-0
4x
8x
8x
x
STEP 11
1x
4x
4x
1x
x
STEP 10
16x
x
TM
22
23
STEP 12
1609-0
1x
STEP 13
2x
2x
2x
2x
16x
16x
4x
4x
TM
24
25
STEP 14
1609-0
2x
2x
8x
x
STEP 15
1x
4x
2x
8x
10x
TM
26
27
STEP 16
1609-0
4x
4x
16x
8x
STEP 17
8x
2x
2x
2x
2x
4x
40x
40x
16x
24
x
TM
28
29
STEP 18
1609-0
8x
2x
2x
2x
2x
4x
x
x
STEP 19
2x
2x
2x
2x
16x
16x
TM
30
31
STEP 20
1609-0
2x
12x
2x
2x
12x
STEP 21
2
2
16x
TM
32
33
22 23
1609-0
16x
4x
4x
4x
16x
16x
TM
34
1609-0
16x
24
Dimensions (L x W x H)
Product weight
144 x 168 x 121"
366 x 426 x 307 cm
450 lb
s
204 kg
35
Cleaning and Maintenance
Warranty
Technical Data
CAUTION!
· Check all screws and nuts periodically for tightness; fasten them as required.
· Disassemble the gazebo in reverse order of the steps used to assemble.
Always disassemble the gazebo completely. A partially-disassembled gazebo
is not stable enough to resist wind and bad weather, and therefore can be
damaged and/or cause damage.
This For Living™ product carries a three (3) year warranty against defects in workmanship and materials.
Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period,
when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear
or breakage due to misuse and/or abuse.
· Do not use bleach, acid, or other abrasive cleaners on the roof panels or beams.
· Steel components of garden accessories and furniture are coated with rust-inhibiting paint. However,
due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
This is a natural process. To minimize this condition, it is recommended that care be taken when
assembling and handling the product, in order to prevent the paint from being scratched. Surface
rust can be removed easily by applying a little common cooking oil. If surface oxidation (rusting)
occurs and no measures are taken to correct it, the oxidation may start dripping onto the assembly
surface, which may cause rough stains that could be difficult to remove.
Loading...