Page 1
Model No. 088-0832-2
Assembly Instructions
IMPORTANT:
Nottingham Bistro Set
Please read instructions thoroughly before assembling. Familiarize yourself with
the inventory of parts and the accompanying illustrations to assure safe and proper assembly.
Page 2
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Page 3
3
Table of Contents
Table of Contents 3
Important Safety Instructions 3
Parts List 4
Assembly 5-8
9Technical Data
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY
Important Safety Instructions
DO NOT over-tighten any screws or nuts.
DO NOT operate if any part is damaged or broken.
NOT FOR USE BY CHILDREN.
WARNING:
Repeated assembly can weaken the locking ability of the washers. Please periodically check all
bolted connections on your bistro to ensure they are tight and secure.
Care & Maintenance
9
Warranty 9
Page 4
4
Model No. 088-0832-2
Parts List
Spring washer M8 -
13
BB
A
Back - 1
B
Seat -
1
C
Leg - 4
13
Flat washer M8 -
CC
Wrench M6/M8 -
1
DD
Plastic foot pad (preassembled on part # C) - 4
EE
M8 nut - 13
FF
Bolt M6 x 25 -
6
GG
Threaded rod M8*15 - 3
HH
D
Table top - 1
E
Leg - 3
F
Support frame - 1
Threaded rod M8 x 25 -
10
AA
Flat washer M6 - 6
JJ
Spring washer M6 -
6
I I
Plastic foot pad
( preassembled on E )
-
3
KK
Page 5
5
Assembly
A
B
C
Page 6
Warranty
6
Warranty Assembly
Step 1:
Insert threaded rod (AA) into each hole in bottom of back (A), then connect seat (B) to back (A)
with flat washers (CC), spring washers (BB) and nuts (FF), as shown in Fig. 1. Do not tighten
at this step.
A
B
AA
BB
CC
FF
Step 2:
Insert threaded rod (AA) into each leg-hole in seat (B), then connect legs (C) to seat (B) with flat washers
(CC), spring washers (BB) and nuts (FF), as shown in Fig. 2. Tighten all the nuts using wrench (DD).
B
C
AA
BB
CC
FF
Model No. 088-0832-2
Fig. 1
Fig. 2
Page 7
D
E
F
7
Assembly
Page 8
Step 3:
Connect support frame (F) to legs (E) with flat washers (JJ), spring washers (II) and bolt (GG), as shown
in Fig. 3. Do not tighten at this step.
Step 4:
Insert threaded rod (HH) into each leg-hole in table-top, then connect table top (D) to legs (E) with flat
washers (CC), spring washers (BB) and nuts (FF), as shown in Fig. 4. Tighten all the nuts using wrench (DD).
E
F
GG
JJ
I I
E
D
FF
BB
CC
HH
Warrant
y
8
Assembly
Model No. 088-0832-2
Fig. 3
Fig. 4
Page 9
• Before using, clean the bistro set completely with a soft dry towel.
• Do not place your bistro set in wet conditions where there is a risk of rust developing.
• When not in use, wipe off any dirt or loose objects, wash with water, rinse
thoroughly and dry completely.
• Do not use strong detergent or abrasive cleaners.
• When not in use, store in a cool, dry location away from sunlight.
Technical Data
This For Living™ product carries a one (1) year warranty against defects in workmanship and materials.
Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty
period, when returned by the original purchaser with proof of purchase. This product is not guaranteed
against wear or breakage due to misuse and/or abuse.
Warranty
Dimensions
Product weight 13 kg
28 lb 10 oz
Chair: 24” Diameter x 28 1/2” H Table: 18” L x 16 1/2” W x 33 5/8” H
61 x 72 cm
45 x 41.5 x 85.5 cm
9
Care & Maintenance
Loading...