7
z SW2: Adjust the Dip Switch 1– 8 upon different range, for the best picture quality on color
brightness & contrast.
CA101VH Installation:
1. Make sure the all Dip Switch SW1, SW2 (6. 7) at down position.
2. Adjust Liner Gain trimmer – 3 for stable video signal.
3. Then switch SW1, SW2 (6.7) to up position until good picture quality on color brightness &
contrast. Please refer to the following recommended chart on DIP-switch for different range.
4. At last, to adjust other trimmers slightly (1, 2, 5) for best quality picture.
5. Make sure ground to the earth (4), to protect CA101VH and other monitoring equipment.
Distance (M) SW1 (1-8), SW2 ( 1-8)
0 – 300 x
300 – 600 SW1(1,2) to SW1(1,2,3) up
600 – 900 SW1(1,2,3) to SW1(1,2,3,4,5,) up
900 – 1200 SW1(1,2,3,4,5,6) to SW(1,2,3,4,5,6,7,8)+SW2(1) up
1200- 1500 SW1(1,2,3,4,5,6,7,8)+SW2(1) to SW1(1,2, 3,4,5,6,7,8)+SW2(1,2,3,4,5) up
Troubleshooting:
All transmission distances mentioned above are without connecting image processor (e.g. Quad,
Multiplexer, DVR), the transmission range would be reducin100-200meters upon different camera,
cable,DVR…ect.
1. When finish the installation, but no video signal, please checks Power LED and power source.
2. Video signal is not normal; please check “+” and “-” of cable.
Specifications:
ITEM NO. CD102 CD104 CD108 CD408
Video Input Channel 1 1 1 4
Video Output Channel 2 4 8 8
Video Input Level 0.8~1.2Vp-p, 75 Ohms
Video Output Level 1Vp-p (Standard), 75 Ohms
Video Bandwidth 10hz - 10MHz
Power Supply DC12V 500mA /
AC24V
DC12V 500mA /
AC24V
DC12V / 500mA DC12V / 500mA
Power Consumption 40mA 100mA 150mA 150mA
Dimensions W x H x D mm 42.2x72.7x46 138x86x29.5 133x87x44 133x145x44
Weight g 65 115 450 680
Material ABS Black ABS Black Metal Black Metal Black
ITEM NO. CD816 CD116 CD1664
Video Input Channel 8 1 16
Video Output Channel 16 16 64
Video Input Level 0.5~1.5vp-p 0.8~1.2Vp-p, 75 Ohms
Video Output Level 1Vp-p , 75 Ohms(AGC) 1Vp-p (Standard), 75 Ohms
Video Bandwidth 10hz - 10MHz
Power Supply DC12V 500mA / AC24V DC12V / 500mA DC12V / 1000mA
Power Consumption 250mA 250mA 800mA
Dimensions W x H x D mm 483x195x44
( 1U height )
483x189x44
( 1U height )
483x110x88.4mm
( 2U height )
Weight g 2270 2050 2980
Material Metal Black