21“ inches
3.5“ inches
2.125” inches
Charging Platform
LED Indicator Light
Power-up the VÜ by attaching the charging
1
cord to the charging port located on the underside
of the unit. Plug the charger into a wall socket for power.
FOLD
Charging Port
Cord Slot
Place your Qi™ compatible device on the VÜ pad
2
to begin charging.
AC Power Supply
FOLD
CARE AND MAINTENANCE:
- Place charger on a hard flat surface.
- When cleaning the charger, use a soft damp cloth only. Do not wet the
exposed metal part of the charging unit. Do not use solvents or scouring
agents as they may mark the LED and casing.
- Do not submerge in water or rinse under faucet.
- Keep the device dry. Precipitation, humidity, liquids and moisture can
contain minerals that corrode electronic circuits.
- If the device gets wet, immediately unplug it and allow it to dry
- Do not disassemble or make any repair attempts to the unit.
-Do not store the device in high or low temperatures.
While the VÜ pad is charging a device, the Green LED will
3
turn on. Upon completion of charge,
the LED will turn off.
LED indicator light
Charging
Standby
Error!
FOLD
CAUTIONS:
1. The VÜ is for charging wireless charging enabled and Qi™Charging
Standard compatible smartphones only.
2. The charging unit should only be used at normal indoor room
conditions.
3. Place charger on a hard flat surface.
4. Never use any power cable and transformer other than those
originally supplied with the charging unit.
5. The VÜ may become hot during charging. Avoid direct contact with
highly flammable materials. Avoid contact with fine furniture finishes.
Under any type of error condition,
4
the Red LED will turn on. In case of
an error condition, remove the
phone and place it back on the pad.
If this does not solve the problem,
unplug the VÜ from the AC charger
and re-connect it.
NOTE: If the Red LED blinks
and does not stay solid,
the error condition has
been automatically resolved
FOLD
Included:
VÜ Pad
AC Power Supply
Users guid
For more information on the VÜ, wireless charging, Qi ™ Charging Standard
and a list of compatible smartphones, please visit: www.TYLT.com/VÜ
TYLT® and the TYLT® logo are registered trademarks of Foreign Trade Corp.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
e
Other marks are the property of their respective owners.
Specifications:
Input: 12V / 750mA
Output: 5W
©2013 TYLT. All rights reserved.
IC2094B
FOLDFOLD
VÜ WIRELESS CHARGING PAD
User Guide
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules
[and with RSS-210 of Industry Canada].
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
To comply with FCC and other RF exposure requirements, please maintain a distance
of 20cm between the charger and your body when in use.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Changes or modifications made to this equipment not expressly approved by the
manufacturer may void the FCC authorization to operate this equipment.
FCC ID: SZQ-T101
2 Sided 6 panel folded User Guide
4/4 (CMYK)
FOLD
FOLD
FOLD
FOLD
Loading...