Ford Explorer 2002, 2002 Mountaineer Workshop Manual

4.

Remove the screws and remove the LH floor duct.

SECTION 412-04: Control Components 2002 Explorer/Mountaineer Workshop Manual

Page

1

of 32002 Explorer/Mountaineer Workshop Manual

11/20/2009

file://C:\TSO\tsocache\YOUR

-

AD45054618_4024\S2N~us~en~file=s2nc4010.htm~gen~

...

REMOVAL AND INSTALLATION

Temperature Blend Door Actuator —LH

Removal and Installation

1. Remove the floor console. For additional information, refer to Section 501-12 .

2. Remove the lower steering column opening finish panel.

1. Remove the screws.

2. Disengage the retaining clips and remove the lower steering column opening finish panel.

3. Remove the LH center instrument panel support brace.

1. Remove the bolts.

2. Remove the nuts and remove the brace.

Page

2

of 32002 Explorer/Mountaineer Workshop Manual

11/20/2009

file://C:\TSO\tsocache\YOUR

-

AD45054618_4024\S2N~us~en~file=s2nc4010.htm~gen~

...

5. Remove the screws.

6. Remove the screw and detach the LH temperature blend door actuator from the heater core and
evaporator core housing assembly.

7. Disconnect the electrical connector and remove the temperature blend door actuator.