Force10 Networks S50V Specifications
S-Series S50V High Performance GbE/10 GbE Access Switch
The Force10 S50V brings core-like resiliency in a compact form factor to the network edge,
enabling cost-effective scalability. With PoE and low switching latency, the high density
Gigabit Ethernet switch delivers the critical functionalities that advanced enterprise network
edges demand.
Key Applications
Coupled with the E-Series, which delivers unmatched resiliency and performance, the S50V
enables IT managers to deploy a reliable end-to-end 10 GbE solution that spans from core
to network edge.
•Line-rate GbE and 10 GbE rack switches for the most demanding data center, storage or
compute facility
•PoE-ready for wiring closets that require core resiliency and high availability for VoIP and
wireless connectivity
• Small form factor POP Layer 2 interconnects leveraging 10 GbE LAN PHY for cost effective
metro or intra-POP transport
Key Features
The S50V is a PoE ready fixed configuration switch that delivers the reliability and scalability
that wiring closets demand.
• 48 10/100/1000 ports in a 1-RU form factor
– 44 ports 10/100/1000 Base-T
– 4 ports 10/100/1000 Base-T shared with SFP pluggable optics
– IEEE802.3af compliant POE that provides up to 15.4W per port and 320W per switch
• Optional Modules
– 2-port 10 GbE LAN PHY (XFP pluggable optics)
– 2-port 10 GbE (CX4)
– 2-port 12 Gbps stacking
– 1-port 24 Gbps stacking
• Switching fabric capacity of 288 Gbps and forwarding capacity of more than 131 Mpps
• Stack up to three S50Vs to deliver a scalable high capacity solution
• Supports Jumbo frames of up to 9,216 bytes; ideal for high-end server connectivity
and network attached file servers
• Full complement of standards-based Layer 2 and Layer 3 features
•Built-in power redundancy
48-port GbE fixed configuration
1-RU switch
Up to four 10 GbE uplinks
Scalable stacking technology supports
144 GbE ports in up to three S50s
S-SERIES
S50V Power over Ethernet Switch
© 2007 Force10 Networks, Inc. All rights reserved. Force10 Networks and E-Series are
registered trademarks, and Force10, the Force10 logo, Reliable Business Networking,
Force10 Reliable Networking, C-Series, P-Series, S-Series, EtherScale, TeraScale, FTOS,
SFTOS, StarSupport and Hot Lock are trademarks of Force10 Networks, Inc. All other
company names are trademarks of their respective holders. Information in this document is
subject to change without notice. Certain features may not yet be generally available. Force10
Networks, Inc. assumes no responsibility for any errors that may appear in this document.
SSDS03 1007 v2.8
Force10 Networks, Inc.
350 Holger Way
San Jose, CA 95134 USA
www.force10networks.com
408-571-3500 PHONE
408-571-3550 FACSIMILE
Physical
48 line-rate ports 10/100/1000Base-T
4-ports SFP (shared)
Optional Modules:
2 line-rate ports 10 Gigabit Ethernet XFP
2 line-rate ports 10 Gigabit Ethernet CX4
2 line-rate ports 12 Gigabit Stacking
1 line-rate port 24 Gigabit Stacking
1 RJ-45 Console/management port with RS-232 signaling
Size: 17.32 w x 16.73 d x 1.73" h (440 x 425 x 44 mm)
Weight: 15.62 lbs (7.10 Kg)
Power Supply: Primary 100-240V AC, 50-60Hz, Autosensing
Redundant -48V Terminal Type DC
Max. Thermal Output: 560 BTU/hr
Max. Current Draw per System: 100vAC/4A, 240vAC/2A
Max. Power Consumption: 470W
19" rack mountable
Standard 1U chassis height
Max. Operating Specifications:
Te mperature: 14° to 131°F (–10° to 55°C)
Operating humidity: 10 to 90% (RH), non-condensing
Max. Non-operating Specifications:
Storage Temperature: –40° to 158°F (–40° to 70°C)
Storage humidity: 10 to 90% (RH), non-condensing
Reliability:
MTBF 130,000 hours
Redundancy
Redundancy in stack connectivity (self healing ring)
Redundancy with up to 4 ports of 10 GbE uplinks
Redundancy with dual modular slots
Redundancy with GbE uplinks – using Link Aggregation
External Power Redundancy
Performance
Layer 2 MAC Addresses: 16K
Layer 3 Forwarding Entries: Up to 3K LPM table and
4K host entries
Switching Fabric Capacity: 288 Gbps
User Traffic Capacity: 176 Gbps (131 Mpps)
Jumbo Frame Support: 9216 bytes
Link Aggregation: 8 links per Link Aggregation
Group & 48 groups per system
Stacking Capacity: Up to 96 Gbps
Queues per port: 8 Queues (8th queue
reserved for stacking)
VLANs: 1024 VLANs with 4096 tag
value support
Line-rate Layer 2 switching:
all protocols, including
IPv4 and IPv6
Line-rate Layer 3 routing: IPv4
LAG load balancing based on Layer 2, IPv4 or IPv6 headers
IEEE Compliance
802.3 10Base-T
802.3u Fast Ethernet (100Base-TX)
802.3ab 1000Base-T
802.3z Gigabit Ethernet
802.3ae 10 Gigabit Ethernet
802.3ak 10 Gigabit Ethernet CX4
802.3af Power over Ethernet
802.1p L2 Prioritization
802.1Q VLAN Tagging, Double VLAN Tagging
802.1s Multiple Spanning Tree Protocol
802.1w Rapid Spanning Tree Protocol
802.1AB Link Layer Discovery Protocol
802.3ad Link Aggregation with LACP
802.1D Bridging
802.3x Flow Control
RFC Compliance
OSPF:
1765 OSPF Database
overflow
1850 OSPF MIB
RIP:
1058 RIP v1
1724 RIP MIB
IP Multicast:
1112 IGMP
2236 IGMPv1 and v2
2362 PIM-SM
General Routing and Switching Protocols:
768 UDP
783 TFTP
791 IP
792 ICMP
793 TCP
826 ARP
854 Telnet
894 IP over Ethernet
903 Reverse ARP
951 BootP
1027 Proxy ARP
Security:
1492 TACACS+
2865 RADIUS
Port Security:
Ietf-draft SSH v2, SSL, Layer 2/3/4 ACLs,
IP Broadcast Control
Quality of Service:
7 user queues per port
IEEE 802.1p
IP DiffServ support
Per port rate limiting
Per queue rate limiting
Strict Priority and Weighted Round Robin Scheduling
Management and SNMP:
RADIUS/TACACS+ Authentication
Secure Web-based Management
Industry familiar CLI: Scripting, Command
completion, Context sensitive help
1157 SNMP v1
1212 Concise MIB Definition
1213 SNMP v2 (MIB-II)
1493 Bridge MIB
1643 Ethernet-like MIB
1901 Community based SNMPv2
1905 Protocol Operations for SNMPv2
1906 Transport Mappings for SNMPv2
1907 Management Information Base for SNMPv2
1908
Coexistence between SNMPv1 and SNMPv2
1724 RIP v2 MIB extension
1850 OSPF v2 MIB
2096 IP forwarding table MIB
2233 The Interfaces Group MIB using SMI v2
2570 SNMP v3
2665 Ethernet-like interfaces
2674 VLAN MIB
2787 VRRP MIB
2819 RMON (Groups 1,2,3,9)
2933 IGMP MIB
2934 PIM MIB for IPv4
Compliances
Safety
CUS 60950, 3rd edition (US NRTL through CSA)
CSA 60950, 3rd edition
CE Mark (EN 60950)
CB Report, all country deviations
EN 60825-1 Safety of Laser Products-Part 1: Equipment
Classification Requirements and User's Guide
EN 60825-2 Safety of Laser Products-Part 2:
Safety of Optical Fibre Communications Systems
21 CFR 1040.10 and 1040.11 FDA laser device
requirements
EMC
USA: FCC CFR47 Part 15, Subpart J, Class A
Canada: ICES-003, Issue-2, Class A
Europe: EN55022 1998 (CISPR 22: 1997), Class A
Japan: VCCI V3/01.4 Class A
EN 61000-4-2 ESD
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT
EN 61000-4-5 Surge
EN 61000-4-6 Low Frequency Conducted Immunity
EN 300 386 V1.3.1 (2001-09) EMC for Network
Equipment
EN 55024 1998
Telecoms
JATE (for Japan)
RoHS Compliance
All S50V components are EU RoHS compliant
with the exception of lead, which is exempt from
the directive for network equipment
Ordering Information
O
RDER
N
UMBER
D
ESCRIPTION
S50-01-GE-48T-V 48-port 10/100/1000BaseT with four
SFP ports, two modular slots and PoE
S50-01-10GE-2P 2-port 10 GbE XFP Module*
S50-01-10GE-2C 2-port 10 GbE CX4 Module*
S50-01-12G-2S 2-port 12 Gbps Stacking Module*
S50-01-24G-1S 1-port 24 Gbps Stacking Module*
S50-01-SSC-12G 60cm stacking cable for S50-01-12G-2S
S50-01-LSC-12G 4m stacking cable for S50-01-12G-2S
S50-01-SSC-24G 60cm stacking cable for S50-01-24G-1S
S50-01-LSC-24G 4m stacking cable for S50-01-24G-1S
S50-01-PSU-V Redundant Power Supply Unit*
Includes one cable
S50-01-SW-L3 Layer 3 Software Upgrade*
* Optional module for the S50V
1256 ICMP
1519 CIDR
1542 BootP (relay)
1812 IP v4 routers
1866 HTML
2068 HTTP
2030 SNTP
2131 BootP/DHCP
helper
2236 IGMP v1 & v2
2338 VRRP
3128
Protection Against
a Variant of the Tiny
Fragment Attack
2154 OSPF MD5
2328 OSPF v2
2082 RIP MD5
2453 RIP v2
3376 IGMPv3
Ietf-draft IGMP-snooping
v1 and v2
Specifications: S-Series S50V Power over Ethernet Switch
Loading...