Food Warming Equipment Company URS-14-GN Service Manual

Home Page

Product Overview

Specification Page: S11–3 GN

PROJECT: MODEL: QUANTITY: ITEM NO:

Quick Link Directory

MOBILE REFRIGERATORSi

Banquet Trolleys Sized to Fit Covered Plates and Gastro-Norm

“URS SERIES”

REFRIGERATOR: 33°F TO 41°F

.5°C TO 5°C

FACTORY PRESET AT 35°F (1.6°C)

URS-10-GN

Specifically designed
engineered f

or transport
applications for banquets,
hotels, convention centers,
institutions, and satellite
operations.

TM

Mobile Refrigeration
Section 11

URS-20-GN

Built like no other refrigerator available, these units address
the most demanding and punishing environments.
Stationary or reach-in units are
while FWE’s construction absorbs vibration and shock
during transport.

Our forced air “COLD-TEMP” system maintains a balanced
temperature to keep chilled foods fresh and crisp for hours ­designed to preserve the kitchen-freshness of your foods
hours longer than any others on the market.

Exclusive “Food Sentry” easy-to-use controls offer
the ultimate performance and accurate cabinet
temperatures. Continuously intuitive self-defrosting
cold system
convenient and user friendly.

The versatile “URS” GN Rack holds 12'' x 20'' pans,
Gastro-Norm, and shelves provided for covered plates.
Available in single and double door models,
all of our mobile refrigerated servers have the same high
quality features and construction that have made
FWE the “Choice of the Professionals.”

with on demand override

not

made to be moved –

make operation

URS-14-GN HDM

◊

Exclusive “Food Sentry” recessed
electronic controls with digital display

◊

“Cold-Temp” system with automatic

Smart Defrost

◊

All stainless steel

◊

All welded construction - no rivets

◊

Tubular stainless steel welded base frame

◊

Full extension bumper

◊

Heavy-duty polyurethane casters

◊

Heavy-duty hinges

◊

Positive close door latch

◊

Heavy-duty push bar handles

◊

Gasket sealed doors

◊

Fully insulated throughout

◊

Removable rack fits GN pans and shelves

◊

Two year limited warranty

U

L

®

with manual override

L

®

Stainless

Steel

made to serve you better

U

C

NSF

®

PROJECT: MODEL: QUANTITY: ITEM NO:

MOBILE REFRIGERATORS

SPECIFICATIONS:

▲

"W"

▲

6'

5'

4'

3'

2'

1'

(180cm)

(150cm)

(120cm)

(90cm)

(60cm)

(30cm)

▲

TOP

"D"

▼

▲

"H"

▲

URS-8-GN URS-10-GN URS-14-GN URS-20-GN

DOOR SWING:

28" (711mm)

TOP

DOOR SWING:

28" (711mm)

Sized to fit covered plates and GN pans

ELECTRICAL DATA

Single Door Units

VOLTS 120 208 220 120 208 220

WATTS 720 780 780 1020 1020 1020

AMPS 6 3.75 3.6 8.5 4.9 4.7

HERTZ 50/60 50/60 50/60 50/60 50/60 50/60

PHASE Single Single Single Single Single Single

NEMA
PLUG

Dedicated circuit.

5-15P

G

G

6-15P

Double Door Units

5-15P

G

G

6-15P

NUMBER OF COVERED PLATES

PLATE DIAMETER AND HEIGHT

COVER & PLATE

HEIGHT

67

mm

80

mm

32 40

48 60

48 64

96 120

:

12'' x 20'' PANS GN 1/1PANS GN 2/1PANS

2.5'' 4'' 6'' 65 100 150 65 100 150

12 8 24

24

14 10 30

30

20 12 40

40

28 20 60

60

COLD-TEMP SYSTEM / CONTROLS. Continuously

intuitive defrost system with on demand defrost and
override. Self contained evaporator coil with thermal
expansion valve, heavy duty circulation fans, de-ice
controls, condensation lines and stainless steel pan.
Condensing unit with 1/3 HP Hi-torque air cooled
compressor and filter drier. System uses environmen­tally safe non-CFC refrigerant. Single door units
are equipped with 134A refrigerant system.
For MAXIMUM PERFORMANCE Double door units
are equipped with 404A refrigerant system. Controls
shall include an easy to read digital display of cabinet
temperature (with recall capability of temperature
set point and actual cabinet temperature), master
ON/OFF button with power indicator light, cooling
cycle indicator light, ON DEMAND DEFROST with
defrost cycle indicator light. Adjustable temperature
range from 33°F to 41°F (0.5°C to 5°C) factory
preset at 35°F (1.6°C).

ELECTRICAL CHARACTERISTICS.

3 wire grounded 10 foot extension power cord
and plug, side mounted for safety. See electrical

MODEL
NUMBER

URS-8-GN

URS-10-GN

URS-14-GN

URS-20-GN

Rail spacings are 3" (76.2mm).
All models are available with the Pass-thru Door [add “P”] and/or Dutch Doors [add “D”]. Dutch Door: 2 half size doors.

CONSTRUCTION. Heliarc welded, single
unit construction of stainless steel;
20-gauge polished exterior, 22-gauge
stainless steel interior with easy-to-clean
coved corners. Welded tubular base frame
shall be 1" square, heavy gauge stainless
steel tubing, with 10-gauge stainless steel
reinforcing stress plates at corners.
INSULATION. “Ultra-Guard” UG-26 high
density fiberglass and foam insulation
throughout.
PUSH BAR HANDLES. Heavy-duty, solid
formed 1" x .375" thick; mounted at each
end of unit. Mountings reinforced with
stainless steel channel.
BUMPER. Solid 1.5" wide continuous
wraparound aluminum channel, bolted to
frame, with snap-in, non-marking replace­able vinyl cushion. Full perimeter bumper
extends beyond doors, handles, etc.,
for added protection. Shall be continuous,
with corner cut-outs to facilitate cleaning.

MAXIUM

SHELVES

PROVIDED

POSITIONS

2

12

15

3

20

2

30

6

SHELF

533mm x 635mm

21

533mm x 635mm

21

533mm x 635mm

21

533mm x 635mm

SHELF SIZE

21"x 25

"

"

x 25

"

"

x 25

"

"

x 25

"

DOORS AND LATCHES. Flush mounted,
stainless steel insulated doors shall be gasket
sealed. Each door shall have two (2) heavy-duty
edgemount die cast hinges. Door latch shall be
edgemounted, full grip, and positive closing.
The hinge and latch mountings are reinforced
with stainless steel backing plates.
CASTERS. Maintenance free polyurethane tire
casters in a configuration of two (2) rigid and
two (2) swivel with brake. Casters shall have a
reinforced yoke mounted to 10-gauge caster
plate. The caster mounting plate shall be secured
to a 10-gauge stainless steel reinforcing stress
plate via welded in place stainless steel studs.
The reinforcing stress plates shall be welded to
the heavy gauge tubular frame of the unit.

RACK. Removable pair of one piece stainless
steel racks with fixed spacings of 3'' (76.2mm).

One piece rack is easy to remove without
the use of tools for cleaning.

SHELVES. Triple plated, welded rod-type shelves

shall be removable and adjustable.

267mm

267mm

267mm

267mm

PLATE

SIZE

10.5

10.5

10.5

10.5

PLATES STACKED

3.125'' 2.625''
80mm67

"

4

"

4

"

3

"

4

3.125'' 2.625''

mm

5

5

4

5

data chart above for amperage and receptacle
configuration. Dedicated circuit.

12 8

14 10

20 12

28 20

12

15

20

30

64

75

10 6

14 10

OVERALL EXTERIOR

DIMENSIONS IN. (mm)

DEEP

"D"

36.5"
(927)

36.5"
(927)

36.5"
(927)

36.5"
(927)

WIDE

"W"

34.5"
(876)

34.5"
(876)

64"

(1626)

64"

(1626)

DOORS

HIGH

"H"

65.5"

(1664)

73.5"

(1867)

58.5"

(1486)

73.5"

(1867)

Optional Accessories:

CE compliant

■

Cold plate cartridge

■

Dutch doors

■

Pass-thru door

■

Glass door

■

Key locking door latch

■

Magnetic latch

■

Paddle latch

■

Padlocking transport latch

■

Left hand door hinging

■

Security packages

■

All swivel or larger casters

■

Door edge trim

■

Floorlock (requires 6" casters)

■

Extra shelves

■

Custom rail spacings

■

FWE Products are used by major
companies world-wide. We can modify,
design, or custom build equipment
to fit your special requirements.

CLASS 110

NO.

OF

CASTER

SIZE

1 6"

1 6"

2 6"

2 6"

SHIP WT .

LBS.
(KG)

380

(171)

420

(190)

550

(250)

670

(304)

Food Warming Equipment Company, Inc.

P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: [phone]

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change without notice.
©10A Food Warming Equipment Company. Inc.