Food Warming Equipment Company UHRS-10-GN Service Manual

Home Page

Quick Link Directory

HEATED/REFRIGERATED MOBILE CONVERTIBLESi

Product Overview

Specification Page: S11–1 GN

PROJECT: MODEL: QUANTITY: ITEM NO:

Banquet Trolleys Sized to Fit Covered Plates and Gastro-Norm

“HOT / COLD CONVERTIBLE SERIES”

CONVERTIBLES

HEATED

MODE BUTTON

TEMP

MASTER

ON/OFF

DIGITAL

TEMP

DISPLAY

INDICATOR

“ON” and
“CYCLE”

INDICATOR
LIGHTS

WITH

LIGHT

RECALL

SETTINGS

Ultimate foodservice
flexibility – change cabinet
from heated mode to

REFRIGERATED
MODE BUTTON

WITH

INDICATOR

LIGHT

ON DEMAND

MANUAL DEFROST

WITH INDICATOR LIGHT

Need menu or banquet operation flexibility? FWE’s unique
Dual-Temp Hot/Cold cabinets let you select the temperature
mode you need, when you need it. Serve cold foods for
lunch, then hold hot dinners for the evening rush.

refrigerated mode as
your food service holding
needs change.

TM

Save space and eliminate costly equipment duplication with
FWE exclusive climate systems. Designed to preserve
the kitchen-fresh quality of your foods hours longer than any
other available on the market. The adjustable temperature
range delivers either “HOT” or “COLD” forced air with
a balanced refrigerated or heated climate.

Exclusive “Food Sentry” easy-to-use controls offer
the ultimate performance and accurate cabinet
temperatures. Continuously intuitive self-defrosting
cold system
convenient and user friendly.

The versatile “UHRS” GN Rack holds 12'' x 20'' pans,
Gastro-Norm, and three (3) shelves provided for covered
plates.

UHRS-10-GN

with on demand override

make operation

Either a

Heated Holding

or a

Refrigerator

all in one unit!

ADJUSTABLE THERMOSTAT RANGE:

REFRIGERATOR: 34°F TO 40°F

FACTORY PRESET AT 38°F (3°C)

HEATED: 90°F TO 190°F

FACTORY PRESET AT 165°F (74°C)

◊

Exclusive Dual-Temp “Food Sentry” recessed
electronic controls with digital display

◊

“Cold-Temp” system with automatic

◊

Smart Defrost

◊

“Top Mount” heat/humidity system

◊

All stainless steel

◊

All welded construction - no rivets

◊

Tubular stainless steel welded base frame

◊

Full extension bumper

◊

Heavy-duty polyurethane casters

◊

Heavy-duty hinges

◊

Positive close door latch

◊

Heavy-duty push bar handles

◊

Gasket sealed doors

◊

Fully insulated throughout

◊

Removable rack fits GN pans and shelves

◊

Two year limited warranty

with manual override

1°C TO 4°C

30°C TO 90°C

Mobile Refrigeration
Section 11

FWE heavy-duty construction features and design
engineering make “HOT/COLD Convertible Series”
the choice of professionals everywhere.

U

®

L

L

®

Stainless

Steel

made to serve you better

NSF

®

U

C

PROJECT: MODEL: QUANTITY: ITEM NO:

HEATED/REFRIGERATED MOBILE CONVERTIBLES

SPECIFICATIONS:

Sized to fit covered plates and GN pans

DOOR SWING:

28" (711mm)

6'

(180cm)

▲

5'

(150cm)

4'

(120cm)

3'

(90cm)

"H"

2'

(60cm)

1'

(30cm)

REFRIGERATED MODE

TOP

▲

UHRS-10

PERFORMANCE VALUES

T

75°F (24°C)
65°F (18

E

55

°

45°F (7.2°C)

M

35°F (1.6°C)

P

PRECOOL

RECOVERY

Precool Time is based on interior cabinet at 75°F (24°C)

PRECOOL

°

C)

F (13°C)

•

0

5 10 15 20 25 30 35

75°F to 40°F
24°C to 4.4°C
APPROX. 25 MIN.

60°F to 40°F
16°C to 4.4°C
APPROX 10 MIN.

RECOVERY

•

TIME

HEATED MODE

PERFORMANCE VALUES

T

190°F (88°C)
170°F (77°C)

E

M

P

Preheat Time is based on interior cabinet at 75°F (24°C)

°

F (66

150
130

°

F (54°C)

110°F (43°C)

°

F (21

70

PREHEAT

RECOVERY

C)

°

C)

°

5 10 15 20 25 30 35

75°F to 170°F
24°F to 77°F
APPROX. 20 MIN

120°F to 170°F

APPROX. 10 MIN

NUMBER OF COVERED PLATES
PLATE DIAMETER AND HEIGHT

COVER & PLATE

HEIGHT

:

MODEL
NUMBER

UHRS-10-GN

Rail spacings are 3" (76.2mm).

UHRS-10-GN is available with the Pass-thru Door [add “P”] and/or Dutch Doors [add “D”]. Dutch Door: 2 half size doors.

MAXIUM

SHELVES

SHELF

PROVIDED

POSITIONS

15

3

SHELF SIZE

21

"

x 25

533mm x 635mm

"

PLATE SIZE

3.125'' 2.625''

DIAMETER

10.5

267mm

"

mm67mm

80

48 60

12'' x 20'' PANS GN 1/1PANS GN 2/1PANS

2.5'' 4'' 6'' 65 100 150 65 100 150

14 10 30

30

14 10

RECOVERY

•

•

PREHEAT

TIME

49°F to 77°F

15

75

(1867)

ELECTRICAL DATA

VOLTS 120 208 220

WATTS 1400 900 900

AMPS 12 4.3 4.1

HERTZ 50 / 60 50 / 60 50 / 60

PHASE Single Single Single

NEMA
PLUG

Dedicated circuit.

G

5-15P

OVERALL EXTERIOR

G

6-15P

CLASS 110

DIMENSIONS IN. (mm)

HIGH

"H"

73.5"

DEEP

"D"

36.5"
(927)

WIDE

"W"

34.5"
(876)

NO.
OF

DOORS

1 6"

SHIP WT .

CASTER

SIZE

(210)

LBS.
(KG)

465

CONSTRUCTION. Heliarc welded, single unit
construction of stainless steel; 20-gauge polished
exterior, 22-gauge stainless steel interior with
easy-to-clean coved corners. Welded tubular
base frame shall be 1" square, heavy gauge
stainless steel tubing, with 10-gauge stainless
steel reinforcing stress plates at corners.
INSULATION. “Ultra-Guard” UG-26 high
density fiberglass and foam insulation throughout.
PUSH BAR HANDLES. Heavy-duty, solid
formed 1" x .375" thick; mounted at each end of unit.
Mountings reinforced with stainless steel channel.
BUMPER. Solid 1.5" wide continuous wraparound
aluminum channel, bolted to frame, with snap-in,
non-marking replaceable vinyl cushion. Full
perimeter bumper extends beyond doors, handles,
etc., for added protection. Shall be continuous, with
corner cut-outs to facilitate cleaning.
DOORS AND LATCHES. Flush mounted, stainless
steel insulated doors shall be gasket sealed.
Each door shall have two (2) heavy-duty edgemount
die cast hinges. Door latch shall be edgemounted,
full grip, and positive closing. The hinge and latch

CASTERS. Maintenance free polyurethane tire
casters in a configuration of two (2) rigid and
two (2) swivel with brake. Casters shall have a
reinforced yoke mounted to 10-gauge caster
plate. The caster mounting plate shall be secured
to a 10-gauge stainless steel reinforcing stress
plate via welded in place stainless steel studs.
The reinforcing stress plates shall be welded to
the heavy gauge tubular frame of the unit.

RACK. Removable pair of one piece stainless
steel racks with fixed spacings of 3'' (76.2mm).

One piece rack is easy to remove without
the use of tools for cleaning.

SHELVES. Triple plated, welded rod-type shelves

shall be removable and adjustable.
SYSTEM CONTROLLER. Controls shall be
up-front, recessed and shall include a digital
display of cabinet temperature (with recall
capability of temperature set point and actual
cabinet temp), heat cycle button with indicator
light, cold cycle button with indicator light, master
ON/OFF switch with power indicator light, and

ON DEMAND DEFROST with indicator light.
mountings are reinforced with stainless steel
backing plates.

Food Warming Equipment Company, Inc.

P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: [phone]

COLD-TEMP SYSTEM. Continuously intuitive
defrost system with on demand override shall have
heavy-duty fan circulation evaporator coil, 1/4 HP
air-cooled closed system, Hi-torque condensing unit
with thermal expansion valve, filter-dryer, pressure
control and condensation lines and pan. System
uses environmentally safe non-CFC refrigerant.
Adjustable temperature preset at 38°F (3°C).
HEAT SYSTEM. Top mounted, forced air blower
system shall include a self-lubricated, impedance
protected, fan-cooled blower motor and an Incoloy
nickel-chromium alloy heating element. Adjustable
temperature 90°F to 190°F (30° to 90°C) preset
at 165°F (74°C).
ELECTRICAL CHARACTERISTICS. 3 wire
grounded 10 foot extension power cord and plug,
side mounted for safety. See electrical data chart
above for amperage and receptacle configuration.
Dedicated circuit.

FWE products may be covered under

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change without notice.
©10A Food Warming Equipment Company. Inc.

Optional Accessories:

CE compliant

■

Cold plate cartridge

■

Heat retention battery

■

Dutch doors

■

Pass-thru door

■

Glass door

■

Key locking door latch

■

Magnetic latch

■

Paddle latch

■

Padlocking transport latch

■

Left hand door hinging

■

Security packages

■

All swivel or larger casters

■

Door edge trim

■

Floorlock (requires 6" casters)

■

Extra shelves

■

Custom rail spacings

■

FWE Products are used by
major companies world-wide.
We can modify, design,
or custom build
equipment to fit your
special requirements.