Food Warming Equipment Company TS-1826-14 Service Manual
Home Page
Product Overview
Specification Page: S2–2
PROJECT: MODEL: QUANTITY: ITEM NO:
Quick Link Directory
MOBILE HUMI-TEMP TRAY SERVERS
Humidified Holding System for 18" x 26" Trays or Pans
“TS-1826 SERIES”
FWE’s “Humi-Temp”Tray
Server keeps bulk foods
fresh hot, moist and
oven-fresh.
Bulk Food Cabinets
Section 2
TS-1826-7
TM
TS-1826-7-7
FWE’s TS-1826 Series “Humi-Temp” cabinets
accommodate 18" x 26", 14" x 18", 12" x 20" and
GN 1/1 trays and pans. FWE’s unique rod-style
tray slides make any combination of these trays
and pans possible. And, FWE’s patented
“Humi-Temp” Heat/Humidity System eliminates
hot and cold spots by gently circulating hot,
moist air throughout the interior of the cabinet.
Humidity can be added to preserve the moisture
content of the food keeping the food fresh
and hot for hours.
The heat system is built into the cabinet to
reduce maintenance and cleaning costs.
Clean up is effortless. The controls are upfront
and eye-level and feature a full range thermostat
adjustable to actual temperature so they are
easy to see and operate. Our cabinets are built
tough using stainless steel throughout. Welded
construction and our exclusive tubular stainless
steel base frame ensure that our cabinets will
withstand the most demanding use. And when
it comes to selection, no one offers more
than FWE. We offer sizes and capacities
to fit any operation. Make your choice
FWE . . . the “Choice of the Professionals”.
TS-1826-18L
◊
“Humi-Temp” built-in heat system
◊
Removable humidity reservoir
◊
Full range thermostat adjustable to
actual
temperature
◊
Recessed eye-level controls
◊
All stainless steel
◊
All welded construction - no rivets
◊
Tubular stainless steel welded base frame
◊
Full extension bumper
◊
Heavy-duty polyurethane casters
◊
Heavy-duty hinges
◊
Positive close door latch
◊
Heavy-duty push bars
◊
Hi-temp door gasket
◊
Fully insulated throughout
◊
Removable tray slides
◊
Two year limited warranty
U
®
L
U
C
L
®
Stainless
Steel
made to serve you better
NSF
®
PROJECT: MODEL: QUANTITY: ITEM NO:
MOBILE HUMI-TEMP TRAY SERVERS
SPECIFICATIONS:
▲
"H"
▼
TS-1826-7 TS-1826-14 TS-1826-7-7 TS-1826-15 TS-1826-18 TS-1826-24 TS-1826-30
Under Counter Split Cavity
4.5"
CAPACITIES OF TRAYS / PANS:
STANDARD CAPACITY:
@
4.5"
Spacings
MODEL
NUMBER
TS-1826-7
Under Counter
TS-1826-14
TS-1826-7-7
Split Cavity
TS-1826-15
TS-1826-18
TS-1826-18P
Pass-thru
TS-1826-24
TS-1826-30
[A] Tray slides accommodate: (1) 18" x 26", (1) 12" x 20", (2) 14" x 18" , (1) GN 1/1 trays/pans.
[A] Uprights punched on 1.5" centers. Tray slides are adjustable. Number of tray slides are listed above. Standard spacings are 4.5".
TS-1826-7/7 Split Cavity provides 2 compartments, each with separate controls; 5 pair of tray slides are provided in each compartment.
•
Dutch Doors [add “D”] are 2 half size doors available on the full-size models.
• Pass-thru Door [add “P”] is available on all model sizes. Add 2.5" to depth dimension.
• See-thru Lexan Door [add “L”] is available on all model sizes.
TRAY/PAN
SLIDES
PROVIDED
5 pr
10 pr
10 pr
5 ea
Cavity
10 pr
12 pr
12 pr
16 pr
20 pr
18 x 26
12 x 20
14 x 18
55105
10 10 20 10
10 10 20 10
10 10 20 10
12 12 24 12
12 12 24 12
16 16 32 16
20 20 40 20
GN 1/1
Spacings are Standard
OPTIONAL CAPACITY:
@
3"
TRAY/PAN
SLIDES
REQUIRED
7 pr (2 pr)
14 pr (4 pr)
15 pr (5 pr)
18 pr (6 pr)
18 pr (6 pr)
30 pr (10 pr)
(Additional )
77147
14 14 28 14
14 14 28 1414 pr (4 pr)
15 15 30 15
18 18 36 18
18 18 36 18
24 24 48 2424 pr (8 pr)
30 30 60 30
[A]
Spacings
18 x 26
12 x 20
14 x 18
OVERALL EXTERIOR
DIMENSIONS IN. (mm)
DEEP
"D"
(845)
(845)
(845)
33.25
(845)
33.25
(845)
35.75
(908)
33.25
(845)
33.25
(845)
"
(1372)
"
"
"
"
"
"
WIDE
"W"
30.5
(775)
54''
30.5
(775)
30.5
(775)
30.5
(775)
30.5
(775)
54
(1372)
54
(1372)
HIGH
"H"
GN 1/1
34.5
(876)
36
(914)
69
(1753)
60
(1524)
69
(1753)
69
(1753)
55.5
(1410)
61
(1549)
"
"
"
"
"
"
"
"
33.25
33.25''
33.25
"
"
"
"
"
"
"
CLASS 100
NO. OF
CASTER
DOORS
SIZE
3.5"
1
2
5
2
5"
Dutch
5"
1
5"
1
2
5"
2
2
"
5"
6"
SHIP WT .
LBS.
(KG)
195
(88)
300
(136)
325
(148)
265
(120)
305
(137)
330
(150)
385
(174)
455
(206)
CUBIC
FEET
(m3)
20.25
(.57)
32.29
(.91)
40.49
(1.15)
35.21
(1.00)
40.49
(1.15)
43.54
(1.23)
57.67
(1.63)
63.38
(1.79)
For 18" x 26" Trays
▲
"W"
▲
▲
DOOR SWING: 20"
TOP
"D"
▼
*PERFORMANCE VALUES
T
E
M
P
PREHEAT
RECOVERY
* Values are for mid-size model listed.
TS-1826-7, TS-1826-14,
TS-1826-15, TS-1826-18
VOLTS 120 120 120 120
WATTS 1350 2100 1600 1550
AMPS 11.3 17.5 13.3 13
HERTZ 50/60 50/60 50/60 50/60
PHASE Single Single Single Single
NEMA
PLUG
Dedicated circuit.
RECOVERY
190°
170°
•
150°
130°
110°
70°
ELECTRICAL DATA
•
PREHEAT
5 10 15 20 25 30 35
75°F to 170°F
APPROX. 20.5 MIN
120°F to 170°F
APPROX. 8 MIN
TS-1826-7-7
Split
Cavity
G
5-15P
5-20P
TIME
G
TS-1826-24
TS-1826-18P
TS-1826-30
G
5-15P
G
5-15P
CONSTRUCTION. Heliarc welded, single
unit construction of stainless steel;
20-gauge polished exterior, 22-gauge stainless
steel interior with easy-to-clean coved corners.
Welded tubular base frame shall be 1" square,
heavy gauge stainless steel tubing, with
10-gauge stainless steel reinforcing plates
at corners.
INSULATION. “Ultra-Guard” UG-26 high
density fiberglass insulation throughout;
top, back, bottom, sides, and door(s).
PUSH BAR HANDLES. Heavy-duty, solid formed
1" x .375" thick; mounted at each end of unit.
Mountings reinforced with stainless steel channel.
BUMPER. Solid 1.5" wide continuous
wraparound aluminum channel, bolted to
frame, with snap-in, non-marking replaceable
vinyl cushion. Full perimeter bumper extends
beyond doors, handles, etc., for added
protection. Shall be continuous, with corner
cut-outs to facilitate cleaning.
DOORS AND LATCHES. Flush mounted,
stainless steel insulated doors. High temperature
gasket sealed; gasket shall be cabinet mounted.
Each door shall have two (2) heavy-duty
edgemount die cast hinges. Door latch shall be
edgemounted, full grip, and positive closing.
The hinge and latch mountings are reinforced
with stainless steel backing plates.
CASTERS.
casters in a configuration of two (2) rigid and
two (2) swivel with brake. Casters shall have a
reinforced yoke mounted to 10-gauge caster
plate. The caster mounting plate shall be secured
to a 10-gauge stainless steel reinforcing stress
plate via welded in place stainless steel studs.
The reinforcing stress plates shall be welded
to the heavy gauge tubular frame of the unit.
TRAY SLIDES. Welded rod-style tray slides are
nickel plated for greater durability and sanitation.
Fully adjustable / removable and designed to give
secure bottom tray support. Removable stainless
steel uprights shall be punched on 1.5" (38mm)
spacings, o.c., for easy tray adjustment, and shall
easily lift off heavy duty stainless steel brackets
without the use of tools for cleaning. Tray slides
accommodate:
(1) 18" x 26", (2) 14" x 18", (1) 12" x 20",
(1) GN 1/1 trays/pans per pair of tray slides.
Food Warming Equipment Company, Inc.
P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: 815-459-7989
HEATING SYSTEM / CONTROLS. Patented built-in
“Humi-Temp” system shall include an Incoloy
nickel-chromium alloy heating element and Hi-Temp,
self-lubricated, impedance protected fan-cooled
blower motor. Cabinet shall have humidifying
Maintenance free polyurethane tire
chamber and drawer style baffled humidifier pan.
Both shall be stainless steel and removable.
Controls shall be up-front, recessed and shall
include a full range thermostat adjustable to actual
temperature. Thermostat shall include temperature
scale marked in ten degree increments (F/C) from
90° to 190°F (30° to 90°C). An operational range
thermometer, power supply light, thermostat cycling
light, and 20 amp ON/OFF switch are also included.
ELECTRICAL CHARACTERISTICS. 3 wire
grounded 10 foot extension power cord and plug,
side mounted for safety. See electrical data chart
above for amperage and receptacle configuration.
Dedicated circuit.
FWE Products are used by major companies
world-wide. We can modify, design, or custom
build equipment to fit your special requirements.
Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com sales@fweco.net
Optional Accessories:
■
Electronic controls
■
Digital thermometer
■
1500 or 2000 watt element
■
220 volt, 50/60 Hz, single phase
■
CE compliant
■
Heat retention battery
■
“Convert-a-Unit” for canned fuel use
MODELS:■TS-1826-7 ■TS-1826-7-7
■
■
■
■
■
■
■
■
■
■
■
■
■
FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.
All specifications subject to change without notice.
©11G Food Warming Equipment Company. Inc.
© 11H Food Warming Equipment Company. Inc.
■
Dutch doors
See-thru lexan door
Key locking door latch
Magnetic latch
Paddle latch
Padlocking transport latch
Left hand door hinging
Security packages
All swivel or larger casters
Door edge trim
Cold plate cartridge
Floorlock
(requires 6" casters)
Extra tray slides
■
TS-1826-15
TS-1826-18
Loading...