Food Warming Equipment Company SBBC-5 Service Manual
W
WW
EATHER
A
AA
LL
Series
ALL STAINLESS STEEL
L
L
C
C
H
H
P
P
P
P
Home Page
Product Overview
Specification Page: S12–9
PROJECT: MODEL: QUANTITY: ITEM NO:
Quick Link Directory
MOBILE BARS & BACK-UPi
For Beverage Service Using Pre-Mix / Post-Mix / Bag-in-Box
WEATHER-ALL “SBBC SERIES”
SBBC-66
SIC-222
Ice Storage Cart
Shown with optional Post-Mix Dispensing System
These rugged bars
are constructed from
all stainless steel
for year-round
indoor/outdoor usage.
Mobile Bars & Back-Up
Section 12
SBBC-88-PO
TM
Specify Dispensing System Sink and Fittings at time of order:
❏
Constructed entirely of stainless steel, these
attractive and functional bars are tough enough
to be used outside year-round, and beautiful
enough to grace the most elegant banquet hall.
Neither high humidity or inclement weather
present a problem to the versatile Weather-All bar.
Use it inside, poolside, oceanside or beach.
It will give years of durable, dependable service
when properly maintained.
Because it’s completely mobile on 5 inch diameter
polyurethane tire casters, you can roll it to where
the crowds (and profits) are, to save table service,
labor and provide faster service to customers.
For even more efficient service, the matching
Weather-All Ice Cart and Back Bar are
perfect companions to FWE’s functional
indoor/outdoor bar.
“Weather-All” is a trademark of Food Warming Equipment Co., Inc.
“PR” for Pre-Mix Dispensing System
❏
“PO” for Post-Mix Dispensing System
❏
“PO-BIB” for Post-Mix Bag-in-Box Dispensing System
Note: Additional charges for factory installation of beverage dispensing system.
Stainless
Steel
made to serve you better
◊
Indoor / outdoor usage
◊
Welded steel top and bottom frames
◊
Raised marine front edge retard spills
◊
Rugged polyurethane tire casters
◊
6 circuit sealed-in cold plate sink
◊
60 lb. ice capacity with stainless steel
sliding cover
◊
Stainless steel work surface and splash
area with coved corners
◊
Removable bottle speed rack
◊
Handy underbar server with 4 bowls
◊
Towel ring
◊
Tank storage area
◊
Opening(s) for dispensing gun tubing
◊
Tank retainer strap
◊
Two year limited warranty
PROJECT: MODEL: QUANTITY: ITEM NO:
WEATHER-ALL “SBBC SERIES” BARS
SPECIFICATIONS:
available with matching Back-Up Bar and Ice Cart
▲
▲
"L"
▲
"D"
▼
▲
"H"
▼
SBBC-88 SBBC-66 SBBC-55
OVERALL EXTERIOR DIMENSIONS IN. (mm)
LONG
"L"
60"
(1524)
62"
(1575)
72"
(1829)
75''
(1905)
96"
(2438)
98"
(2489)
WORKING
AREA
HEIGHT
35.5"
(902)
35.5"
(902)
35.5"
(902)
35.5"
(902)
35.5"
(902)
35.5"
(902)
DEEP
MODEL
NUMBER
SBBC-5
(Without Bumper)
SBBC-55 with Full Bumper
SBBC-6
(Without Bumper)
SBBC-66 with Full Bumper
SBBC-8
(Without Bumper)
SBBC-88 with Full Bumper
[A]
Removable bottle speed rack extends 3.5" beyond depth dimension.
HIGH
"H"
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
"D"
[A]
26.5"
(673)
28.5"
(724)
26.5"
(673)
28.5"
(724)
26.5"
(673)
28.5"
(724)
PRE-MIX
TANK
4
4
6
6
8
8
CAPACITY
12 qts
12 qts
12 qts
12 qts
16 qts
16 qts
CAPACITY
Consult Factory for
SHIPPING CLASS
BOTTLE
RACK
CASTER
SIZE
[A]
5"
5"
5"
5"
5"
5"
SHIP WT .
LBS.
(KG)
480
(218)
500
(227)
555
(252)
575
(261)
600
(272)
620
(281)
ICE STORAGE CART
Holds 200 lbs. of ice! Fully insulated.
Flip-top stainless lid. Drain, push bar
SIC-222
handle, and all swivel 5" casters.
Welded steel frame.
OVERALL EXTERIOR DIMENSIONS IN. (mm)
MODEL
NUMBER
SIC-200
(Without Bumper)
SIC-222 with Full Bumper
HIGH
"H"
33.5"
(1156)
33.5"
(1156)
OVERALL EXTERIOR DIMENSIONS IN. (mm)
MODEL
NUMBER
SPSC-4
(Without Bumper)
SPSC-44 with Full Bumper
SPSC-6
(Without Bumper)
SPSC-66 with Full Bumper
SPSC-8
(Without Bumper)
SPSC-88 with Full Bumper
HIGH
"H"
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
45.5"
(1156)
BACK BAR
SPSC-44
Enclosed on 3-sides!
bar accessories. Convenient work/serve black top.
Stainless steel interior shelves on 9.5", 11.5",
and 14" spacings. Welded steel frame. 5" casters.
Stores glasses and
ICE
DEEP
"D"
24.5"
(648)
26.5"
(673)
26.5"
(673)
28.5"
(724)
26.5"
(673)
28.5"
(724)
26.5"
(673)
28.5"
(724)
LONG
"L"
24.5"
(648)
26.5"
(673)
DEEP
"D"
LONG
(1219)
(1270)
(1829)
(1905)
(2438)
(2489)
TANK
CAPACITY
200 lbs
200 lbs
"L"
48"
50"
72"
75''
96"
98"
CASTER
SIZE
5"
5"
CASTER
SIZE
5"
5"
5"
5"
5"
5"
SHIP WT .
LBS.
(KG)
140
(64)
150
(68)
SHIP WT .
LBS.
(KG)
480
(218)
500
(227)
555
(252)
575
(261)
600
(272)
620
(281)
WEATHER-ALL BARS:
The reinforcing stress plates shall be welded
to the heavy gauge tubular frame of the unit.
CONSTRUCTION. Heliarc welded, single unit
construction shall consist of welded stainless
steel base frame of heavy gauge 1"square
Eight (8) foot models are equipped with six (6)
casters: four (4) rigid casters and two (2) swivel
with brake.
stainless steel tubing with extra 10-gauge
stainless steel caster corner plate
reinforcements.
BUMPERS. Full bumper models shall have
solid 1-1/2"wide continuous wraparound
aluminum channel, bolted to frame, with
BODY / TOP MATERIALS. Shall be stainless
steel, heliarc welded; ground and polished.
Interior work surface shall be constructed of
stainless steel, with easy-to-clean coved
snap-in, non-marking replaceable vinyl cushion.
Full perimeter bumper shall be continuous,
for added protection, with corner cut-outs to
facilitate cleaning.
corners. Front edge of work surface shall have
raised marine nosing to retard spills.
STORAGE AREA. On six (6) foot models, the
glass storage area shall include removable and
CASTERS. Polyurethane tire casters in a
configuration of two (2) rigid, and two (2) swivel
with brake. Casters shall have a reinforced yoke
welded to 10-gauge caster mounting plate.
The caster mounting plate shall be secured to a
10-gauge stainless steel reinforcing stress plate
adjustable stainless steel shelf. On all models,
the bottom storage area shall be stainless steel
lined. Tank storage area shall accommodate a
minimum of four (4) 5-gallon premix tanks,
and CO2tank, and a tank retainer strap shall
be provided.
via welded in place stainless steed studs.
Food Warming Equipment Company, Inc.
P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: 815-459-7989
ICE SINK WITH SEALED IN COLD PLATE.
Sink shall be one-piece stainless steel with coved
corners: 19-3/4"x 12-3/4"x 10-1/2"deep. Sink
shall have enclosed foam insulation with drain
and line fittings. 6 circuit sealed-in cold plate
shall be compatible for use with Pre-Mix, Post-Mix,
and Bag-in-Box systems. Sink shall have a capacity
of 60 lbs., and be provided with a stainless steel
sliding cover. Specify system to be used:
Pre-Mix, Post-Mix or Bag-in-Box.
BAR ACCESSORIES. Standard equipment shall
include 5"deep, heavy gauge stainless steel bottle
speed rack extending 3-1/2"beyond depth
dimension of 31.5"; removable without tools.
Revolving underbar server shall have four (4)
removable bowls. Towel ring shall be provided
under top work surface.
Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com sales@fweco.net
Optional Accessories:
Locking bottle speed rack
■
Extra stainless steel shelves
■
Locking doors for storage areas
■
Stainless steel bar gutters
■
Pre-mix dispensing equipment
■
Post-mix dispensing equipment
■
Bag-in-Box dispensing equipment
■
Protective storage cover
■
All swivel casters
■
All swivel with brake casters
■
FWE Products are used by
major companies world-wide.
We can modify, design, or
custom build equipment to fit
your special requirements.
FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.
All specifications subject to change without notice.
©11C Food Warming Equipment Company. Inc.
Loading...