Food Warming Equipment Company PTST-1109-78HR Specifications
Home Page
Product Overview
Specification Page: S9–6
PROJECT: MODEL: QUANTITY: ITEM NO:
Quick Link Directory
❏ Heated
Section:
Built-in
Heat System
❏ Refrigerated
Section:
Built-in
Refrigerator
PRISONER TRAY SERVERS
Serve Hot & Cold Trays Out of One Cabinet
CORRECTIONAL “HEATED / REFRIGERATED SERIES”
HOLD,
TRANSPORT,
AND
SERVE
“Correctional Quality” –
Hot and Refrigerated
food service –
Built to withstand the
demanding requirements
of correctional facilities.
TM
FWE Heated/ Refrigerated Prisoner Tray Servers
allow you to serve hot and cold foods from the same
two-section cabinet, separated by a thermal insulated
wall assuring even temperatures in both sections.
Our heat system keeps pre-trayed foods hot and moist
in one compartment, while cold foods remain chilled
and ready to serve in the refrigerated section. The top
bumper serves as a guard rail and makes beverage
service fast and easy. Inmate populations are served
quickly, efficiently, and at less cost. The heat system is
built into the cabinet to prevent tampering and reduce
maintenance and cleaning costs. Clean up is effortless.
The controls are tamper resistant and feature a full
range thermostat adjustable to actual temperature
(90°F -190°F) so they are easy to see and operate.
We don’t just add a “security package” to a catalog
item
designed to withstand the correctional environment.
Our cabinets are built tough with an 18-gauge stainless
steel exterior, welded construction and our exclusive
tubular stainless steel base frame. The Heated /
Refrigerated Series includes abuse resistant features
such as tamper resistant screws, locking security
latches and protected controls. From minimum to
maximum security, a wide range of other prison
accessory packages are available to tailor each unit
to your institutions’ special needs.
PTST-1109-78-HR
- the Heated / Refrigerated Series is specifically
♦
18-gauge stainless steel exterior
♦
Locking security latch for each section
♦
Tamper resistant fasteners throughout
♦
Super-Duty 6” polyurethane casters
♦
Heavy-duty 12-gauge stainless steel hinges
♦
Flush-in door, positive close paddle latch
♦
Tubular stainless steel push bars welded to the body
♦
Heat and refrigeration systems have separate protected
controls with recessed thermometer and security cover
♦
All stainless steel
♦
All welded construction - no rivets
(extra welds at critical points)
♦
Tubular stainless steel welded base frame
♦
Full extension bumper
♦
Trays are stacked in each open compartment
♦
Fully insulated throughout
♦
One year parts, six months labor
limited warranty
Correctional Security Units
Section 9
Of course, as with all FWE cabinets, standard models
can be modified to accommodate other tray sizes
and spacings.
U
®
L
Stainless
U
C
made to serve you better
Steel
L
®
NSF
®
PROJECT: MODEL: QUANTITY: ITEM NO:
SPECIFICATIONS:
T
6’
▲
5’
4’
3’
"H"
2’
1’
▼
PTST-1109-78HR
MODEL
NUMBER
PTST-1109-78HR
Heated / Refrigerated
Sections
Tray Size
11"x 9
"
NUMBER OF TRAYS
HEATED
SECTION
78
E
M
P
PREHEAT
RECOVERY
*Values are for smaller model listed.
COLD
SECTION
78
PRISONER TRAY SERVER
PERFORMANCE VALUES
RECOVERY
190°
170°
•
150°
130°
110°
70°
•
PREHEAT
TIME
5 10 15 20 25 30 35
75°F to 170°F
APPROX. 18.8 MIN.
120°F to 170°F
APPROX. 7.2 MIN.
OVERALL EXTERIOR DIMENSIONS IN. (mm)
HIGH
62.25
(1581)
"H"
"
DEEP
"D"
34.5
"
(876)
(1499)
PERFORMANCE VALUES
T
75°
65°
E
55°
45°
M
35°
P
0°
PRECOOL
RECOVERY
Precool Time is based on interior cabinet at 75°F.
Values are for smallest model listed.
NO.
WIDE
"W"
"
59
CASTER
OF
SIZE
DOORS
6
2
"
RECOVERY
PRECOOL
•
5 10 15 20 25 30 35
75°F to 40°F
APPROX. 25 MIN.
60°F to 40°F
APPROX. 10 MIN.
CLASS 100
SHIP WT .
LBS.
(KG)
685
(311)
•
TIME
CUBIC
FEET
(m3)
84.85
(2.37)
Heated and Refrigerated
Compartments
ELECTRICAL DATA
VOLTS 120
WATTS 2340
AMPS 19.5
HERTZ 50/60
PHASE Single
NEMA
PLUG
5-20P
Dedicated circuit.
G
CONSTRUCTION. Heliarc welded, single
unit construction of stainless steel;
18-gauge polished exterior, 20-gauge
stainless steel interior with easy-to-clean
coved corners. Welded tubular base frame
shall be 1'' square, heavy gauge stainless
steel tubing, with 10-gauge stainless steel
reinforcing stress plates at corners.
INSULATION. "Ultra-Guard" UG-26 high
density fiberglass insulation throughout;
top, back, bottom, sides, doors.
PUSH BARS. Heavy-duty, 1'' diameter
tubular stainless steel push handles.
Mountings welded in place and reinforced
with stainless steel channel to prevent
removal.
SUPER-DUTY BUMPER. Solid 1.5"
wide continuous wraparound aluminum
channel, bolted to frame, with snap-in,
non-marking replaceable vinyl cushion.
Full perimeter bumper extends beyond
doors, handles, etc., for added protection.
Shall be continuous, with corner cut-outs
to facilitate cleaning.
DOORS AND LATCHES. Flush mounted,
stainless steel, insulated doors. When
opened doors lie flush against side of
unit or another door to keep work aisles
unobstructed. Each door shall have
three (3) heavy-duty, 12-gauge stainless
steel hinges. Doors shall be equipped with
a positive closing, flush-in-door, stainless
steel paddle latch. The hinge and latch
mountings are reinforced with stainless steel
backing plates. Doors shall be provided with
padlock compatible (padlock not included)
transport / security latch.
CASTERS. 6'' Super-Duty polyurethane tire
casters with Zerk grease (lubrication) fittings
in a standard configuration of two(2) swivel with
brake and two (2) rigid. Casters shall have a
reinforced yoke welded to 10-gauge caster
mounting plate. The caster mounting plate shall
be secured to a 10-gauge stainless steel reinforcing stress plate via welded in place stainless
steel studs. The reinforcing stress plates
shall be welded to the heavy gauge tubular
frame of the unit.
HEATING SYSTEM/CONTROLS. Top mounted,
forced air blower system shall include two (2)
Hi-Temp, self-lubricated, impedance protected,
fan-cooled blower motors to distribute heat
equally throughout cabinet interior. Heating
element shall be located at top of cabinet to
eliminate hot spots and to prevent overheating of
lower trays and pans. Back wall heat distribution
tunnel shall be vented for balanced air
circulation. Controls shall be concealed,recessed
and shall include a full range thermostat
adjustable to actual temperature. Thermostat
shall include temperature scale marked in
ten degree increments (F/C) from 90° to 190°F
(30° to 90°C). An operational range
thermometer, power supply light, thermostat
cycling light, and 20 amp ON/OFF switch are
also included.
REFRIGERATION SYSTEM / CONTROLS.
Continuously intuitive defrost system with on
demand override shall have heavy-duty fan
circulation evaporator coil, 1/4 HP air-cooled closed
system, Hi-torque condensing unit with thermal
expansion valve, filter-dryer, pressure control and
condensation lines and pan. System uses environ-
Optional Accessories:
■
220 volt, 50/60 Hz, single phase
■
Tray rack assembly
■
Custom spacings
■
Rack hold down device
■
Tow bar
mentally safe non-CFC refrigerant. Controls shall be
up-front, recessed and shall include a digital display
of cabinet temperature. Adjustable temperature
34°F to 40°F (1°C to 4°C) preset at 38°F (3°C).
ABUSE RESISTANT FEATURES. Cabinet shall
have 12-gauge stainless steel thermostat knob
retention strap, and 1/4'' thick Lexan cover over
the thermometer. Both shall be attached with
tamper-proof fasteners to prevent unauthorized
removal. Cabinet shall have tamper-resistant
fasteners in all critical areas, and extra welds
throughout for added durability. Heavy-duty
1'' diameter tubular stainless steel push handles
shall be welded in place and reinforced with
stainless steel channel to prevent removal. Each
door shall be provided with padlock compatible
(padlock not included) transport/security latch.
ELECTRICAL CHARACTERISTICS. 3 wire
grounded 10 foot extension twist lock power cord
and plug, side mounted for safety. Dedicated circuit.
FWE Products are used by major
companies world-wide. We can
modify, design, or custom build
equipment to fit your special
requirements.
Food Warming Equipment Company, Inc.
P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: 815-459-7989
Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com sales@fweco.net
FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.
All specifications subject to change without notice.
©10F Food Warming Equipment Company. Inc.
Loading...