Food Warming Equipment Company PTS-1410-102H Specifications

Home Page

Product Overview

Specification Page: S9–1

PROJECT: MODEL: QUANTITY: ITEM NO:

Quick Link Directory

HOLD,

TRANSPORT,

AND

SERVE

PRISONER TRAY SERVERS

Heated Holding for 15.5" x 11.5"or 10" x 14" Compartment Trays

CORRECTIONAL “PTS SERIES”

“Correctional Quality” –
Heavy-duty stainless steel
heated transport serves
inmates efficiently,
securely, and at less cost!

TM

PTS-3030

PTS Series cabinets keep pre-trayed foods hot and
oven-fresh, even when prepared hours in advance.
The heat system is built into the cabinet to prevent
tampering and reduce maintenance and cleaning
costs. Clean up is effortless. The controls are tamper
resistant and feature a full range thermostat
adjustable to actual temperature (90°F to 190°F)
so they are easy to see and operate.

We don’t just add a “security package” to a catalog
item

- the PTS Series is specifically designed to
withstand the correctional environment. Our cabinets
are built tough with an 18-gauge stainless steel
exterior, welded construction and our exclusive
tubular stainless steel base frame. The PTS Series
includes abuse resistant features such as tamper
resistant screws, locking security latches and
protected controls. From minimum to maximum
security, a wide range of other prison accessory
packages are available to tailor each unit to your
institutions’ special needs. Five standard PTS
models accommodate from 20 to 102 stainless
steel or polycarbonate compartment trays.

PTS-6060

(Trays not included.)

◊

18-gauge stainless steel exterior

◊

“Maxi-Guard” locking security latch for each door

◊

Tamper resistant fasteners throughout

◊

Super-duty extra-wide 6" polyurethane casters

◊

Heavy-duty 12-gauge stainless steel hinges

◊

Flush-in door, positive close paddle latch

◊

Tubular stainless steel push bars welded to the body

◊

One piece stainless steel rack assembly

◊

Recessed thermometer with security cover

◊

Thermostat knob retention strap

◊

Built-in heat system with protected controls

◊

Full range thermostat adjustable to

actual

temperature (90°F -190°F)

◊

All stainless steel

◊

All welded construction - no rivets
(extra welds at critical points)

◊

Tubular stainless steel welded base frame

◊

Full extension bumper

◊

Hi-temp door gasket

◊

Fully insulated throughout

◊

One year parts, six months labor limited warranty

Correctional Security Units
Section 9

Of course, as with all FWE cabinets, standard
models can be modified to accommodate other
tray sizes and spacings.

U

®

L

Stainless

U

C

made to serve you better

Steel

L

®

NSF

®

PROJECT: MODEL: QUANTITY: ITEM NO:

SPECIFICATIONS:

DOOR SWING: 17

6'

5'

4'

3'

"H"

2'

1'

MODEL
NUMBER

PTS-2020

PTS-3030

PTS-4040

PTS-6060

PTS-1410-102H

[A]

Standard tray spacing 3''. Other tray spacings available upon request.

"

▲

▼

PTS-2020 PTS-3030 PTS-4040 PTS-6060 PTS-1410-102H

COMPARTMENT TRAY CAPACITIES

15.5"x 11.5

"

10"x 14

Compartment Trays

20

30

40

60

102

Compartment Trays

20

30

40

60

102

[A]

"

OVERALL EXTERIOR
DIMENSIONS IN. (mm)

HIGH

"H"

46

"

(1168)

61

"

(1549)

46

"

(1168)

61

"

(1549)

69

"

(1753)

DEEP

"D"

29.25
(743)

29.25
(743)

29.25
(743)

29.25
(743)

29.5
(749)

PRISONER TRAY SERVERS

▲

"W"

▲

"

"

"

"

"

▲

"D"

▼

(1245)

(1245)

(1689)

WIDE

"W"

28

"

(711)

28

"

(648)

49

"

49

"

66.5

"

TOP

NO.

OF

CASTER

DOORS

SIZE

1

1

2

2

3

6

"

6

"

"

6

6

"

6

"

CLASS 100

CUBIC

SHIP WT .

LBS.
(KG)

225

(102)

325

(147)

370

(167)

440

(198)

560

(252)

FEET

(m3)

21.80
(.62)

28.91
(.82)

38.15

(1.08)

50.60

(1.43)

78.33

(2.22)

* PERFORMANCE VALUES

T

190°
170°

E

150°
130°

M

110°

P

70°

PREHEAT

RECOVERY

*Values are for mid-size model listed.

ELECTRICAL DATA

PTS-2020, PTS-3030

VOLTS 120 120 120

WATTS 1350 1650 2050

AMPS 11.3 13.75 17.5

HERTZ 50/60 50/60 50/60

PHASE Single Single Single

NEMA
PLUG

Dedicated circuit.

5-15P 5-15P 5-20P

Compartment
Tray s

RECOVERY

•

•

PREHEAT

TIME

5 10 15 20 25 30 35

75°F to 170°F
APPROX. 18.8 MIN.

120°F to 170°F
APPROX. 7.2 MIN.

G

PTS-4040
PTS-6060

PTS-1410-102H

G

G

CONSTRUCTION. Heliarc welded, single

unit construction of stainless steel;
18-gauge polished exterior, 20-gauge
stainless steel interior with easy-to-clean
coved corners. Welded tubular base frame
shall be 1" square, heavy gauge stainless
steel tubing, with 10-gauge stainless steel
reinforcing stress plates at corners.
INSULATION. “Ultra-Guard” UG-26 high
density fiberglass insulation throughout;
top, back, bottom, sides, door(s).
PUSH BARS. Heavy-duty, 1" diameter
tubular stainless steel push handle(s).
One (1) on single door units, two (2) on
multi-door units. Mountings welded in
place and reinforced with stainless steel
channel to prevent removal.
SUPER-DUTY BUMPER. Solid 1.5"
wide continuous wraparound aluminum
channel, bolted to frame, with snap-in,
non-marking replaceable vinyl cushion.
Full perimeter bumper extends beyond
doors, handles, etc., for added protection.
Shall be continuous, with corner cut-outs
to facilitate cleaning.
DOORS AND LATCHES. Flush mounted,
stainless steel, insulated doors. When
opened, doors lie flush against side of
unit or another door to keep work aisles
unobstructed. Each door shall have

three (3) heavy-duty, 12-gauge stainless steel
hinges. Each door shall be equipped with
a positive closing, flush-in-door, stainless steel
paddle latch. The hinge and latch mountings
are reinforced with stainless steel backing plates.
Each door shall be provided with padlock
compatible (padlock not included)
transport/security latch.
CASTERS. 6" heavy-duty, extra wide
polyurethane tire casters with Zerk grease
(lubrication) fittings in a configuration of
two (2) rigid, and two (2) swivel with brake.
Casters shall have a reinforced yoke welded
to 10-gauge caster mounting plate. The caster
mounting plate shall be secured to a 10-gauge
stainless steel reinforcing stress plate via welded
in place stainless steel studs. The reinforcing
stress plates shall be welded to the heavy gauge
tubular frame of the unit.
TRAY SLIDES. Fully welded, unitized tray slide
assemblies shall be heavy gauge stainless steel,
channels fixed-in-place at 3" spacings and shall
be capable of field adjustability to accommodate
two (2) 15.5" x 11.5" (except on PTS-1410-102H)
or (2) 10" x 14" trays per pair of tray slides.
Unless specified otherwise, assembly shall be
factory adjusted to accommodate 15.5" x 11.5"
trays, except on PTS-1410-102H. Contact factory
for special spacing and custom assembly is
available to accommodate other tray sizes.

HEATING SYSTEM/CONTROLS. Heat system shall
be built-in to prevent tampering, loss, or damage.
System shall include an Incoloy nickel-chromium
alloy heating element, and Hi-Temp, self-lubricated,
impedance protected, fan-cooled blower motors.
Controls shall be end mounted, fully recessed and
shall include a full range thermostat adjustable
to actual temperature. Thermostat shall include
temperature scale marked in ten degree
increments (F/C) from 90° to 190°F (30° to 90°C).
An operational range thermometer, 20 amp
ON/OFF switch, power supply light and
thermostat cycling light are also included.
ABUSE RESISTANT FEATURES. Cabinet shall
have 12-gauge stainless steel thermostat knob
retention strap, and 1/4" thick Lexan cover over
the thermometer. Both shall be attached with
tamper-proof fasteners to prevent unauthorized

Optional Accessories:

■

220 volt, 50/60 Hz, single phase

■

CE compliant

■

Heat retention battery

■

Cord winding brackets

■

Removable twist-lock cord and plug

■

High impact plexi-glass,
hinged control panel cover

■

Locking paddle latch

■

Rack hold down device

■

All swivel or larger casters

■

Top corner bumpers

■

Stainless steel bumper

■

Beverage urn angles

■

Top perimeter guard rail

■

Cold plates (eutectic device)

■

Tow bar

removal. Cabinet shall have tamper-resistant
fasteners in all critical areas, and extra welds
throughout for added durability. Heavy-duty
1" diameter tubular stainless steel push handles
shall be welded in place and reinforced with
stainless steel channel to prevent removal. Each
door shall be provided with padlock compatible
(padlock not included) transport/security latch.

ELECTRICAL CHARACTERISTICS. 3 wire

FWE Products are used by major
companies world-wide. We can
modify, design, or custom build
equipment to fit your special
requirements.

grounded 10 foot extension power cord and plug,
side mounted for safety. Dedicated circuit.

Food Warming Equipment Company, Inc.

P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: [phone]

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change without notice.
©10F Food Warming Equipment Company. Inc.