Food Warming Equipment Company PS-1220-6-6 Service Manual
Home Page
Product Overview
Specification Page: S2–4
PROJECT: MODEL: QUANTITY: ITEM NO:
Quick Link Directory
MOBILE HUMI-TEMP PAN SERVERSi
Humidified Holding System for 12" x 20" and Gastro-Norm 1/1 Pans
“PS-1220 SERIES”
PS-1220-8
FWE’s built-in “Humi-Temp”
system keeps pans of bulk
foods “kitchen-fresh”, hot
and moist!
Single Door Units
Bulk Food Cabinets
Section 2
TM
PS-1220-45
FWE’s PS-Series “Humi-Temp” cabinets accommodate
shallow and deep 12" x 20" and GN 1/1 pans. FWE’s
unique pan slide racks are one piece die stamped
stainless steel, providing greater hygiene and strength.
The front edges are relieved for easy loading and
the pair of racks are removable for easy cleaning.
FWE’s patented “Humi-Temp” Heat / Humidity System
eliminates hot and cold spots by gently circulating hot,
moist air throughout the interior of the cabinet. Humidity
can be added to preserve the moisture content of the
food keeping the food fresh and hot for hours.
The heat system is built into the cabinet to reduce
maintenance and cleaning costs. Clean up is effortless.
The controls are upfront and eye-level and feature a full
range thermostat adjustable to actual temperature so
they are easy to see and operate. Our cabinets are built
tough using stainless steel throughout. Welded
construction and our exclusive tubular stainless steel
base frame ensure that our cabinets will withstand the
most demanding use. And when it comes to selection,
no one offers more than FWE. We offer sizes and
capacities to fit any operation. Make your choice
FWE . . . the “Choice of the Professionals”
PS-1220-15
◊
“Humi-Temp” built-in heat system
◊
Removable humidity reservoir
◊
Full range thermostat adjustable to
actual
temperature
◊
Recessed eye-level controls
◊
All stainless steel
◊
All welded construction - no rivets
◊
Tubular stainless steel welded base frame
◊
Full extension bumper
◊
Heavy-duty polyurethane casters
◊
Heavy-duty hinges
◊
Positive close door latch
◊
Heavy-duty push bars
◊
Hi-temp door gasket
◊
Fully insulated throughout
◊
Stainless steel pan slides
◊
Two year limited warranty
Stainless
U
U
®
L
C
L
®
Steel
made to serve you better
NSF
®
PROJECT: MODEL: QUANTITY: ITEM NO:
MOBILE HUMI-TEMP PAN SERVERS
SPECIFICATIONS:
▲
"W"
▲
▲
TOP
"D"
▼
▲
5'
4'
3'
"H"
2'
1'
▼
PS-1220-8 PS-1220-10 PS-1220-6/6 PS-1220-15 PS-1220-20 PS-1220-30 PS-1220-45
MODEL
NUMBER
PS-1220-8
PS-1220-10
PS-1220-6/6
Split Cavity 6 ea 3 ea 2 ea 6 ea 3 ea 2 ea
PS-1220-15
PS-1220-20
PS-1220-30
PS-1220-45
[A] Combinations of deep and shallow pans may be used with varying capacities.
•
•
•
†
†
†
Many half-size pans may also be used. For one-third size pans, consult factory.
Dutch Doors [add “D”] are 2 half size doors available on the full-size models.†
Pass-thru Door [add “P”] is available on all model sizes. Add 2.5" to depth dimension.
See-thru Lexan Door [add “L”] is available on all model sizes.
DOOR SWING: 16"
Split Cavity
CAPACITIES OF
2.625''
DEPTH
2.5" 4" 6"
8 42 8 42
10 5310 53
12 6412 64
15 7515 75
20 10 6 20 10 6
30 14 10 30 14 10
45 21 15 45 21 15
12" x 20"
FIXED SPACINGS
12" x 20"
66.7mm
PANS
65mm100mm150
or
GN 1/1
DEPTH
TOP
PANS
[A]
FIXED SPACINGS
GN 1/1
PANS
mm
OVERALL EXTERIOR DIMENSIONS IN. (mm)
HIGH
"H"
37.25"
(946)
42.5"
(1080)
63"
(1600)
57.5"
(1461)
42.5"
(1080)
57.5"
(1461)
57.5"
(1461)
DEEP
"D"
26.75"
(679)
26.75"
(679)
26.75"
(679)
26.75"
(679)
26.75"
(679)
26.75"
(679)
26.75"
(679)
WIDE
"W"
24.5"
(622)
24.5"
(622)
24.5"
(622)
24.5"
(622)
42"
(1067)
42"
(1067)
59.25"
(1505)
TOP
CLASS 100
NO.
CASTER
OF
SIZE
DOORS
5"
1
1
5"
2
5"
1
5"
5"
2
2
5"
3
5"
SHIP WT .
LBS.
(KG)
150
(68)
200
(90)
230
(104)
215
(98)
255
(116)
315
(142)
415
(188)
For 12" x 20" and GN 1/1 Pans
* PERFORMANCE VALUES
T
E
M
P
PREHEAT
RECOVERY
* Values are for mid-size model listed.
PS-1220-8
PS-1220-10
PS-1220-15
VOLTS 120 120 120
WATTS 1350 2100 1600
AMPS 11.3 17.5 13.3
HERTZ 50 / 60 50 / 60 50 / 60
PHASE Single Single Single
NEMA
PLUG
Dedicated circuit.
RECOVERY
190°
170°
•
150°
130°
110°
70°
ELECTRICAL DATA
5-15P
•
5 10 15 20 25 30 35
75°F to 170°F
APPROX. 20.5 MIN
120°F to 170°F
APPROX. 8 MIN
PS-1220-6/6
Split Cavity
G
5-20P
PREHEAT
TIME
G
PS-1220-20
PS-1220-30
PS-1220-45
G
5-15P
CONSTRUCTION. Heliarc welded, single
unit construction of stainless steel; 20-gauge
polished exterior, 22-gauge stainless steel
interior with easy-to-clean coved corners.
Welded tubular base frame shall be 1" square,
heavy gauge stainless steel tubing, with
10-gauge stainless steel reinforcing
plates at corners.
INSULATION. “Ultra-Guard” UG-26 high
density fiberglass insulation throughout; top,
back, bottom, sides, and door(s).
PUSH BAR HANDLES. Heavy-duty, solid
formed 1" x .375" thick, mounted at each end
of unit. Mountings reinforced with stainless
steel channel.
BUMPER. Solid 1.5" wide continuous
wraparound aluminum channel, bolted to
frame, with snap-in, non-marking replaceable
vinyl cushion. Full perimeter bumper extends
beyond doors, handles, etc., for added
protection. Shall be continuous, with corner
cut-outs to facilitate cleaning.
DOORS AND LATCHES. Flush mounted,
stainless steel insulated doors. High
temperature gasket sealed; gasket shall be
cabinet mounted. Each door shall have two (2)
heavy-duty edgemount die cast hinges. Door latch
shall be edgemounted, full grip, and positive
closing. The hinge and latch mountings are
reinforced with stainless steel backing plates.
CASTERS.
casters in a configuration of two (2) rigid and
two (2) swivel with brake. Casters shall have a
reinforced yoke mounted to 10-gauge caster
plate. The caster mounting plate shall be secured
to a 10-gauge stainless steel reinforcing stress
plate via welded in place stainless steel studs.
The reinforcing stress plates shall be welded to
the heavy gauge tubular frame of the unit.
PAN SLIDES. Stainless steel racks shall be
one piece die stamped channel-type pan slides
at 2.625" (66.7 mm) spacings to accommodate
either deep or shallow 12" x 20" or GN 1/1 pans
(at varying capacities - see chart). Racks are
removable without tools for cleaning. Racks
shall lift off heavy-duty stainless steel supports.
HEATING SYSTEM / CONTROLS. Patented
built-in “Humi-Temp” system shall include an
Incoloy nickel-chromium alloy heating element
and Hi-Temp, self-lubricated, impedance protected
fan-cooled blower motor. Cabinet shall have
humidifying chamber and drawer style baffled
humidifier pan. Both shall be stainless steel and
removable. Controls shall be up-front, recessed
Maintenance free polyurethane tire
and shall include a full range thermostat adjustable
to actual temperature. Thermostat shall include
temperature scale marked in ten degree
increments (F/C) from 90° to 190°F (30° to 90°C).
An operational range thermometer, power supply
light, thermostat cycling light, and 20 amp
ON/OFF switch are also included.
ELECTRICAL CHARACTERISTICS. 3 wire
grounded 10 foot extension power cord and plug,
side mounted for safety. See electrical data chart
above for amperage and receptacle configuration.
Dedicated circuit.
FWE Products are used by major companies
world-wide. We can modify, design, or custom
build equipment to fit your special requirements.
Food Warming Equipment Company, Inc.
P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: 815-459-7989
Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com sales@fweco.com
Optional Accessories:
Electronic controls
■
Digital thermometer
■
1500 or 2000 watt element
■
220 volt, 50/60 Hz, single phase
■
CE compliant
■
Heat retention battery
■
“Convert-a-Unit” for canned fuel use
■
Dutch doors
■
See-thru lexan door
■
Key locking door latch
■
Magnetic latch
■
Paddle latch
■
Padlocking transport latch
■
Left hand door hinging
■
Security packages
■
All swivel or larger casters
■
Door edge trim
■
Cold plate cartridge
■
Floorlock (requires
■
6" casters)
Custom pan
■
slide spacings
FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.
All specifications subject to change without notice.
©10D Food Warming Equipment Company. Inc.
†
Loading...