Food Warming Equipment Company P-120 Specifications

Home Page

Product Overview

Specification Page: S1–4

PROJECT: MODEL: QUANTITY: ITEM NO:

Quick Link Directory

HUMI-TEMP MOBILE BANQUET CABINETSi

Circulated Heat / Humidity for Pre-Plated Meals

“P SERIES”

To achieve maximum capacity,

maximum cover size is 11" diameter.

For 12.375" cover size, refer to “XL Series”.

(See Specification Page: S1–5)

FWE’s “Humi-Temp”
Servers prevent dry-air
burn and keep pre-plated
meals hot, fresh and
flavorful for hours.

TM

Banquet Cabinets
Section 1

P-200

Shown with Door Edge Trim optional accessory.

Take the worry out of serving delays and last
minute arrivals with FWE’s “P Series” banquet
cabinets. The “P Series” features FWE’s patented
“Humi-Temp” Heat / Humidity System which
eliminates hot and cold spots by
hot, moist air throughout the interior of the cabinet.
Humidity can be added to preserve the moisture
content of the food keeping the food fresh
and hot for hours.

The heat system is built into the cabinet to reduce
maintenance and cleaning costs. Clean up is
effortless. The controls are upfront at eye-level and
feature a full range thermostat adjustable to actual
temperature so they are easy to see and operate.
Our cabinets are built tough using stainless steel
throughout. Welded construction and our exclusive
tubular stainless steel base frame ensure that our
cabinets will withstand the most demanding use.
And when it comes to selection, no one offers
more than FWE. We offer sizes and capacities
to fit any operation. Make your choice
FWE...the “Choice of the Professionals.”

gently

circulating

P-48

◊

“Humi-Temp” built-in heat system

◊

Removable humidity reservoir

◊

Heavy-duty “No Sag” removable shelves

◊

Full range thermostat adjustable to

actual

temperature

◊

Recessed eye-level controls

◊

All stainless steel

◊

All welded construction - no rivets

◊

Tubular stainless steel welded base frame

◊

Full extension bumper

◊

Heavy-duty polyurethane casters

◊

Heavy-duty hinges

◊

Positive close door latch

◊

Hi-temp door gasket

◊

Fully insulated throughout

◊

Two year limited warranty

U

®

L

U

C

L

®

Stainless

Steel

made to serve you better

NSF

®

PROJECT: MODEL: QUANTITY: ITEM NO:

SPECIFICATIONS:

6'

▲

5'

4'

3'

"H"

2'

1'

▼

P-48 P-60 P-72 P-80 P-90 P-120 P-144 P-180 P-200

COVERED PLATES:

11"

MODEL
NUMBER

P-48

P-60

P-72

P-80

P-90

P-120

-

P-144

P-180

P-200

[A] Capacities when using covers depend on height of plate and cover. Capacities shown are based on plate and cover height

of 3.125" and 2.625" respectively. 11" diameter cover is maximum when not using carriers and stacking directly on shelves.
[B] Available with 5 shelf optional accessory (at time of order @ additional charge) with 9.75" shelf clearance (installed at
factory only). Covered plates then stack 3 high on each shelf. Carriers cannot be used with this optional accessory.

When ordering carriers - Specify ❏ CP for covered plates or ❏ UP for uncovered plates.

DIAMETER

COVER & PLATE HEIGHT:

3.125'' 2.625''

40 48 2 5

[A] [A]

48 60 3 4

[A] [A]

60 72 2 5

[A] [A]

64 80 4 4

[A] [A]

72 90 3 5

[A] [A] [B]

96 120 3 4

[A] [A] [B]

120 144 3 5

[A] [A] [B]

150 180 3 5

[A] [A] [B]

160 200 4 5

[A] [A] [B]

COVERED
PLATES
STACKED

SHELVES

HIGH

22.25"

x 21.75"

22.25"

x 21.75"

22.25"
x 33"

22.25"

x 21.75"

22.25"
x 33"

22.25"

x 44.375"

22.25"

x 44.375"

22.25"

x 54.75"

22.25"

x 54.75"

SHELF

SHELF

CLEARANCE

SIZE

(mm)

16.5"
(419)

13.7"
(348)

16.5"
(419)

13.7"
(348)

13.7"
(348)

13.7"
(348)

16.5"

(419)

16.5"
(419)

13.7"
(348)

OVERALL EXTERIOR

DIMENSIONS IN. (mm)

HIGH

"H"

49.25"
(1251)

57"

(1448)

49.25"
(1251)

71.5"

(1816)

62.5"

(1588)

57"

(1448)

68"

(1727)

68"

(1727)

72.5"

(1842)

HUMI-TEMP MOBILE BANQUET CABINETS

CLASS 100

NO.

DEEP

"D"

28.5"
(724)

28.5"
(724)

28.5"
(724)

28.5"
(724)

28.5"
(724)

28.5"
(724)

28.5"
(724)

28.5"
(724)

28.5"
(724)

WIDE

"W"

31.75"
(806)

31.75"
(806)

42.5"

(1080)

31.75"
(806)

43.5"

(1105)

53.75"
(1365)

53.75"

(1365)

64.5"

(1638)

64.5"

(1638)

OF

CASTER

DOORS

SIZE

5" 1

5" 1

5" 1

5" 1

5" 1

5" 1

6" 1

6" 1

6" 2

Dutch

SHIP

WT .
LBS.

(KG)

255

(116)

260

(118)

280

(126)

295

(134)

330

(150)

355

(160)

420

(190)

460

(208)

515

(232)

▲

"W"

▲

▲

"D"

▲

"D"

▼

TOP

▼

DOOR SWING: 21.25"

"W"

▲

TOP

ELECTRICAL DATA

P-48, P-60, P-72,

P-80, P-90

VOLTS 120 120

WATTS 1350 1600

AMPS 11.3 13.3

HERTZ 50 / 60 50 / 60

PHASE Single Single

NEMA
PLUG

Dedicated circuit.

**

5-15P

Also available in 1600W, 13.3 amp, and 5-15P. Consult factory.

▲

G

P-120
P-144

5-15P

*

PERFORMANCE VALUES

T

190°
170°

E

150°
130°

M

110°

P

70°

5 10 15 20 25 30 35

P-180
P-200

120

2100

17.5

50 / 60

Single

G

5-20P

75°F to 170°F
APPROX. 30 MIN.

**

PREHEAT

RECOVERY

Values are for mid-size model listed.

*

G

RECOVERY

•

120°F to 170°F
APPROX. 12 MIN.

•

PREHEAT

TIME

FWE Products
are used by major
companies world-wide.
We can modify, design,
or custom build
equipment to fit your
special requirements.

CONSTRUCTION. Heliarc welded, single unit

construction of stainless steel; 20-gauge
polished exterior, 22-gauge stainless steel interior
with easy-to-clean coved corners. Welded tubular
base frame shall be 1" square, heavy gauge stainless
steel tubing, with 10-gauge stainless steel reinforcing
stress plates at corners.
INSULATION. “Ultra-Guard” UG-26 high density
fiberglass insulation throughout; top, back, bottom,
sides, and door(s).
PUSH BARS HANDLES. Heavy-duty, solid formed
1" x .375" thick; mounted at each end of unit.
Mounting reinforced with stainless steel channel.
BUMPER. Solid 1.5" wide continuous wraparound alu­minum channel, bolted to frame, with snap-in,
non-marking replaceable vinyl cushion. Full perimeter
bumper extends beyond doors, handles, etc., for
added protection. Shall be continuous, with corner
cut-outs to facilitate cleaning.

DOORS AND LATCHES. Flush mounted, stainless
steel insulated doors. High temperature gasket
sealed; gasket shall be cabinet mounted. Each door
shall have two (2) heavy-duty edgemount die cast
hinges. Doors shall have edgemounted and full grip
door latches. The hinge and latch mountings are
reinforced with stainless steel backing plates.
CASTERS. Maintenance free polyurethane tire casters in
a configuration of two (2) rigid and two (2) swivel with
brake. Casters shall have a reinforced yoke mounted to
10-gauge caster plate. The caster mounting plate shall
be secured to a 10-gauge stainless steel reinforcing
stress plate via welded in place stainless steel studs.
The reinforcing stress plates shall be welded to the
heavy gauge tubular frame of the unit.
SHELVES. Triple plated, welded rod-type shelves
shall be removable. Shelves shall be supported by
high strength, “no fall” 14-gauge die-formed stainless
steel brackets. Bottom shelf shall be equipped with
“lift-up” hook for easy access to facilitate cleaning.

Food Warming Equipment Company, Inc.

P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: [phone]

HEATING SYSTEM / CONTROLS. Patented
built-in “Humi-Temp” system shall include an Incoloy
nickel-chromium alloy heating element and Hi-Temp,
self-lubricated, impedance protected fan-cooled
blower motor. Cabinet shall have humidifying
chamber and drawer style baffled humidifier pan.
Both shall be stainless steel and removable. Controls
shall be up-front, recessed and shall include a full
range thermostat adjustable to actual temperature.
Thermostat shall include temperature scale marked
in ten degree increments (F/C) from 90° to 190°F
(30° to 90°C). An operational range thermometer,
power supply light, thermostat cycling light, and
20 amp ON/OFF switch are also included.
ELECTRICAL CHARACTERISTICS. 3 wire
grounded 10 foot extension power cord and plug,
side mounted for safety. See chart above for
amperage and receptacle configuration.
Dedicated circuit.

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

Optional Accessories:

Digital thermometer

■

1500 or 2000 watt element

■

220 volt, 50/60 hz, single phase

■

CE complaint

■

Heat retention battery

■

“Convert-a-Unit” for canned fuel use

■

Dutch doors

■

Key locking door latch

■

Paddle latch

■

Magnetic latch

■

Padlocking transport latch

■

Left hand door hinging

■

Security packages

■

Larger or type of casters

■

Six caster swivel configuration

■

■

Floorlock (requires 6" casters)

■

Door edge trim

■

Cold plate cartridge

■

Extra shelves

■

Plate carriers: CP or UP

FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change without notice.
©10G Food Warming Equipment Company. Inc.