Food Warming Equipment Company OTR-15-MS Service Manual
Home Page
Product Overview
Specification Page: S10–5
PROJECT: MODEL: QUANTITY: ITEM NO:
Quick Link Directory
OPEN TRAY RACK MACHINE STANDi
Supports 300 to 500 lbs
“OTR SERIES”
❏ Holds 18" x 26" x 1" trays
❏ Wings can hold a variety
of tray sizes
❏ Accommodates Slicers,
Mixers and other heavy
kitchen appliances
❏ A work horse for
any kitchen
OTR-15-MSWT
Versatile mobile work
station in durable all
stainless steel –
Use for preparation and
processing operations
or machine stand.
TM
Queen Marys & Utility Carts
Section 10
Shown with 18" x 13" trays suspended in the wing
OTR-17-MSWT
channels and 18" x 26" tray in base rack.
Use this handy Open Tray Rack Machine
Stand to support or transport your
Meat Slicer, 20-30 Quart Mixer, or use
as a personal work center or work station
for small appliances. The space saving
open tray racks hold 18" x 26" trays – and
other fractional 18" wide trays – to make
food preparation and food processing fast
and convenient.
All stainless steel construction makes this
unit durable and easy to clean. As an added
design feature, the swivel caster locks
both the wheel and swivel, making the unit
stationary and sturdy. This unique design
eliminates the rocking caused by the
diamond caster configuration used by
competitors.
“Total Lock” simultaneously locks
the swivel and wheel
making the unit stationary.
◊
5" heavy-duty all swivel “Total Lock” casters
with “step-on, step-off” swivel locks
◊
16-gauge stainless steel reinforced top and bottom
◊
12-gauge corner reinforcements
◊
All stainless steel
◊
All welded construction - no rivets
◊
Tubular stainless steel welded base frame
◊
Removable tray rack assembly
◊
Raised marine edge retards spills
◊
Supports up to 500 lbs
◊
Two year limited warranty
Stainless
Steel
made to serve you better
NSF
®
PROJECT: MODEL: QUANTITY: ITEM NO:
SPECIFICATIONS:
"W"
▲
▲
TOP
6'
▲
5'
4'
3'
"H"
2'
1'
▼
OTR-15-MS
OTR-15-MSWT
OTR-16-MS
OTR-16-MSWT
OTR-17-MS
OTR-17-MSWT
"D"
▼
OTR-15-MS OTR-15-MSWT OTR-16-MS OTR-16-MSWT OTR-17-MS OTR-17-MSWT
MODEL
NUMBER
1.5" FIXED SPACING
TRAY CAPACITY
15 - 18" x 26"
15 - 18" x 26"
*
16 - 18" x 26"
*
16 - 18" x 26"
17 - 18" x 26"
17 - 18" x 26"
*
OPEN TRAY RACK MACHINE STAND
▲
“Top View”
OVERALL EXTERIOR
DIMENSIONS IN. (mm)
HIGH
"H"
33"
(838)
33"
(838)
34.5"
(876)
34.5"
(876)
36"
(914)
36"
(914)
DEEP
26"
(660)
26"
(660)
26"
(660)
26"
(660)
(660)
26"
(660)
"D"
26"
WIDE
"W"
20.5"
(521)
20.5"
(521)
20.5"
(521)
20.5"
(521)
20.5"
(521)
20.5"
(521)
SUPPORTS
300 to
500 lbs
300 to
500 lbs
300 to
500 lbs
300 to
500 lbs
300 to
500 lbs
300 to
500 lbs
CLASS 125
SHIP WT .
CASTER
LBS.
SIZE
(KG)
90
5"
(41)
90
5"
(41)
100
5"
(45)
100
5"
(45)
105
5"
(48)
105
5"
(48)
Spacings are fixed at 1.5".
MSWT
Machine Stand with “Wing Table” that accommodates and hold two (2) each 18" x 26" Trays, one (1) per side.
*
Bottom shelf is available with optional Pitched Center Drain.
CONSTRUCTION. Heliarc welded construction of
stainless steel. Top and bottom shelf shall be
heavy-duty 16-gauge polished stainless steel,
die-formed. Welded tubular base frame shall be
reinforcing stress plate via welded in place
stainless steel studs. The reinforcing stress
plates shall be welded to the heavy gauge
tubular frame of the unit.
1" square, heavy gauge stainless steel tubing,
with 10-gauge stainless steel reinforcing stress
plates at corners. Uprights shall be
12-gauge stainless steel.
TRAY RACK ASSEMBLY. Unitized tray rack
assembly shall be heavy gauge stainless
steel, channels fixed in place at 1.5"
spacings. Assemblies are designed to
CASTERS. 5" heavy-duty all swivel polyurethane
casters with simultaneous swivel and wheel
locks, holding the unit stationary. Casters shall
have a reinforced yoke welded to 10-gauge
accommodate one (1) 18" x 26" tray.
Removable stainless steel uprights shall
easily lift off heavy-duty stainless steel
supports without the use of tools.
caster mounting plate. The caster mounting plate
shall be secured to a 10-gauge stainless steel
Food Warming Equipment Company, Inc.
P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: 815-459-7989
MACHINE STAND WITH WING TABLE.
Two (2) stainless steel channels are attached
to work surface, one on each side, each
accommodating a 18" x 26" (and other
varying sizes) sheet tray for added work
surface and convenience. Trays are
suspended in “winged-style” fashion,
supported by its rolled-lip edge.
Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com sales@fweco.net
FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.
All specifications subject to change without notice.
©07B Food Warming Equipment Company. Inc.
Optional Accessories:
Perimeter bumper
■
Floor legs
■
Pinched center floor drain
■
FWE Products are used by major
companies world-wide. We can
modify, design, or custom build
equipment to fit your special
requirements.
Loading...