Food Warming Equipment Company MT-1826-14, MT-1826-7-7 Service Manual

Home Page

Product Overview

Specification Page: S3–2

PROJECT: MODEL: QUANTITY: ITEM NO:

Quick Link Directory

Single Door Units

MOISTURE-TEMP TRAY CABINETSi

Humidified Holding System for 18" x 26" Trays and Pans

“MT-1826 SERIES”

Split Cavity Model

Features two (2)

individually

controlled

separate

compartments

Hold hot food fresh
and ready to serve,
longer than ever before!

TM

Moisture-Temp Cabinets
Section 3

MT-1826-7/7

The versatile “Moisture-Temp” features separate “air
moisture” and “air temperature” controls. The operator
can adjust for the optimum temperature and moisture of
the cabinet environment to hold plated food to maintain
that “just-cooked” quality longer than ever before. The
Moisture-Temp reduces waste and increases profits
by allowing you to hold foods longer without sacrificing
quality and customer satisfaction. FWE’s Moisture-Temp
(MT) Series cabinets accommodate 18" x 26", 14" x 18",
12" x 20", and GN 1/1 trays and pans. FWE’s unique
universal tray slides make any combination of these
trays and pans possible.

The heat system is built into the cabinet to reduce
maintenance and cleaning costs. Clean up is effortless.
The controls are upfront and eye-level and feature a
full range thermostat adjustable to actual temperature
so they are easy to see and operate. Our cabinets are
built tough using stainless steel throughout. Welded
construction and our exclusive tubular stainless steel
base frame ensure that our cabinets will withstand the
most demanding use. And when it comes to selection,
no one offers more than FWE. We offer sizes and
capacities to fit any operation. Make your choice
FWE. . . the “Choice of the Professionals”.

MT-1826-18

◊

“Moisture-Temp” humidified holding system

◊

Separate controls for heat and humidity

◊

Removable, oversized humidity reservoir

◊

Drip trough with removable drain plug

◊

Full range thermostat adjustable to

actual

temperature

◊

All stainless steel

◊

All welded construction - no rivets

◊

Tubular stainless steel welded base frame

◊

Heavy-duty polyurethane casters

◊

Recessed eye-level controls

◊

Heavy-duty hinges

◊

Positive close door latch

◊

Hi-temp door gasket

◊

Recessed hand grips

◊

Fully insulated throughout

◊

Removable tray slides

◊

Two year limited warranty

Stainless

U

U

®

L

C

L

®

Steel

made to serve you better

NSF

®

PROJECT: MODEL: QUANTITY: ITEM NO:

For 18" x 26"

SPECIFICATIONS:

6'

▲

5'

4'

3'

"H"

2'

1'

▲

MT-1826-7UC MT-1826-7 MT-1826-14 MT-1826-15 MT-1826-18

Under Counter

4.5"

CAPACITIES OF TRAYS / PANS:

STANDARD CAPACITY:

@ 4.5" Spacings

MODEL
NUMBER

MT-1826-7UC

Under Counter

MT-1826-7

MT-1826-14

MT-1826-15

MT-1826-18

MT-1826-18P

Pass-thru

MT-1826-18D

Dutch Doors

MT-1826-18PD

Pass-thru with
2 Dutch Doors

MT-1826-18PDD

Pass-thru with
4 Dutch Doors

MT-1826-7/7

Split Cavity

MT-1826-7/7P

Split Cavity
With Pass-thru

[A]

Tray-slides accommodate: (1) 18" x 26", (1) 12" x 20", (2) 14" x 18", (1) GN 1/1 trays and / or pans.

Uprights punched on 1-1/2" centers. Tray-slides are adjustable.

TRAY/PAN

SLIDES

PROVIDED

5 pr

5 pr

10 pr

10 10 20 10

10 pr

10 10 20 10

12 pr

12 12 24 12

12 pr

12 12 24 12

12 pr

12 pr

12 pr

10 pr

10 pr

12 12 24 12

12 12 24 12

12 12 24 12

10 10 20 10

10 10 20 10

18 x 26

12 x 20

14 x 18

55105

55105

GN 1/1

7 pr (2 pr)

7 pr (2 pr)

14 pr (4 pr)

15 pr (5 pr)

18 pr (6 pr)

18 pr (6 pr)

18 pr (6 pr)

18 pr (6 pr)

18 pr (6 pr)

14 pr (4 pr)

14 pr (4 pr)

Spacings are Standard

OPTIONAL CAPACITY:

@ 3" Spacings

TRAY/PAN

SLIDES

REQUIRED

18 x 26

(Additional )

77147

77147

14 14 28 14

15 15 30 15

18 18 36 18

18 18 36 18

18 18 36 18

18 18 36 18

18 18 36 18

14 14 28 14

14 14 28 14

12 x 20

MOISTURE-TEMP CABINETS

[A]

OVERALL EXTERIOR

DIMENSIONS IN. (mm)

DEEP

HIGH

"D"

"H"

14 x 18

GN 1/1

31

34.5

"

(787)

(876)

36

"

31

(914)

(787)

36

"

31

(914)

(787)

60

"

31

(1524)

(787)

69

"

31

(1753)

(787)

69

"

33.5

(1753)

(851

"

69

31

(1753)

(787)

69

"

33.5

(1753)

(851

69

"

33.5

(1753)

(851

"

69

31

(1753)

(787)

69

"

33.5

(1753)

(851

"

"

"

"

"

"
)

"

"
)

"
)

"

"
)

WIDE

"W"

26.5
(673)

26.5
(673)

50

"

(1270)

26.5
(673)

26.5

(673)

26.5
(673)

26.5
(673)

26.5
(673)

26.5
(673)

26.5

(673)

26.5
(673)

NO.

OF

DOORS

"

1

"

1

2

"

1

"

1

"

2

"

2

Dutch

"

3

Dutch

2

"

4

Dutch

"

2

"

4

MT-1826-7/7

Split Cavity

CLASS 100

SHIP WT .

CASTER

LBS.

SIZE

(KG)

175

3.5

"

(80)
175

"

5

(80)
300

5

"

(136)

255

5

"

(116)

295

5

"

(134)

325

5"

(148)

305

5"

(138)

335

5"

(152)

345

5"

(156)

330

5"

(150)

365

5"

(162)

▲

"D"

▼

*PERFORMANCE VALUES

T

190°
170°

E

150°
130°

M

110°

P

70°

PREHEAT

RECOVERY

* Values are for largest model listed.

ELECTRICAL DATA

VOLTS 120 120

WATTS 1650 2300

AMPS 13.75 19.2

HERTZ 50 / 60 50 / 60

PHASE Single Single

NEMA
PLUG

Dedicated circuit only.

•

Dutch Doors [“D”] are 2 half size doors for full-size models.

•

Pass-thru Door [add “P”] is available on all model sizes.
Add 2.5" to depth dimension.

•

See-thru Lexan Door [add “L”] is available on all model sizes.

trays/pans

▲

"W"

▲

TOP

RECOVERY

•

5 10 15 20 25 30 35

•

PREHEAT

TIME

75°F to 160°F
APPROX. 25 MIN.

120°F to 160°F
APPROX. 6 MIN.

G

5-15P

DOOR SWING:

22.25"

MT-1826-7/7

Split Cavity

G

5-20P

CONSTRUCTION. Heliarc welded, single unit
construction of stainless steel; 20-gauge polished
exterior, 22-gauge stainless steel interior with
easy-to-clean coved corners. Welded tubular base
frame shall be 1" square, heavy gauge stainless steel
tubing, with 10-gauge stainless steel reinforcing
stress plates at corners.
INSULATION. “Ultra-Guard” UG-26 high density
fiberglass insulation throughout; top, back, bottom,
sides and door(s).
HANDLES. Form grip flush-in-wall hand grips recess
mounted on each side of unit.
DOORS AND LATCHES. Flush mounted, stainless
steel insulated doors. High temperature gasket sealed;
gasket shall be cabinet mounted. Each door shall
have two (2) heavy-duty edgemount die cast hinges.
Door latch shall be edgemounted, full grip, and
positive closing. The hinge and latch mountings are
reinforced with stainless steel backing plates.
CASTERS. Maintenance free polyurethane tire
casters in a configuration of two (2) rigid and two (2)
swivel with brake. Casters shall have a reinforced yoke

mounted to 10-gauge caster plate. The caster
mounting plate shall be secured to a 10-gauge s
tainless steel reinforcing stress plate via welded in
place stainless steel studs. The reinforcing stress
plates shall be welded to the heavy gauge tubular
frame of the unit.
TRAY SLIDES. Welded rod-style tray slides are
stainless steel for greater durability and sanitation.
Fully adjustable / removable and designed to give
secure bottom tray support. Removable stainless steel
uprights shall be punched on 1.5" (38) spacings, o.c.,
for easy tray adjustment, and shall easily lift off
heavy-duty stainless steel brackets without the
use of tools for cleaning.
MOISTURE-TEMP SYSTEM/CONTROLS. Built in
humidified holding system shall include two (2)
separate long life Incoloy nickel-chromium alloy
heating elements per cavity; separate, adjustable
controls shall be provided for each function.
One to control the interior air temperature, and
one to control the interior air moisture with hydro
immersion waterbath. An oversized and baffled,

Food Warming Equipment Company, Inc.

P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: [phone]

stainless steel water reservoir shall be removable
for ease of cleaning/sanitation.
has removable drain plug.

Built-in drip trough

System shall have
a Hi-Temp, self-lubricated, impedance protected
fan-cooled blower motor for moist air distribution.
Controls shall be up-front, recessed and eye-level
for convenience and safety, and shall include a full
range thermostat adjustable to actual temperature.
Thermostat shall include temperature scale marked
in ten degree increments (F/C) from 90° to 190°F
(30° to 90°C). An operational range thermometer,
adjustable moisture control (moist to crisp), 20 amp
ON/OFF power switch, humidity cycle light, and
thermostat cycling light shall also be included.
ELECTRICAL CHARACTERISTICS. 3 wire grounded
10 foot extension power cord and plug, side mounted
for safety. See electrical data chart above for
amperage and receptacle configuration.
Dedicated circuit.

FWE Products are used by major companies
world-wide. We can modify, design, or custom
build equipment to fit your special requirements.

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

Optional Accessories:

Digital thermometer

■

Mechanical timer

■

220 volt, 50/60 Hz, single phase

■

CE compliant

■

Heat retention battery

■

Dutch doors

■

See-thru lexan door

■

Key locking door latch

■

Magnetic latch

■

Paddle latch

■

Padlocking transport latch

■

Left hand door hinging

■

Security packages

■

All swivel or larger casters

■

Door edge trim

■

Full extension bumper

■

Heavy push/pull handles

■

Corner bumpers (set of 4)

■

Cold plate cartridge

■

Floorlock (requires 6" casters)

■

Extra tray slides

■

FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change without notice.
©10D Food Warming Equipment Company. Inc.