Food Warming Equipment Company HLC-2127-6 Service Manual

Recessed

tri-directional

cord pocket

allows for

compact fit.

Ultra-Universal Heated Holding

Easy to use up-front controls
are recessed protected.

Stainless Steel Rack
accommodates 12" x 20" Pans,
GN1/1 Pans, and GN 2/1 Pans
at 1.5" (38mm) spacings.

Full grip magnetic handle is
easy to open with full hands.

Radiant Heat System keeps
foods oven-fresh and prevents
product dehydration or
shrinkage with two (2) individual
compartments, each with
separate heat controls.

Six (6) shelves are included.
Shelves are adjustable
and removable allowing for
banquet plates, 18" x 26"
sheet trays, baker’s pans, or
versatile shapes and sizes
of trays and pans.

2 Separately Controlled

QUICK
SHIP
ITEM

HLC-2127-9-9

Stainless Steel Rack

FOOD WARMING EQUIPMENT COMPANY, INC

7900 South Route 31 Crystal Lake IL 60014 | 800 222 4393 | 815 459 7500 | Fax: [phone] | www.FWE.com

Compartments

Allows Versatile Use

HLC-2127 Series With Stainless Steel Rack

Standard Feature:

Cord Pocket allows for
multi-directional use.

Optional Accessory:

Cord Winding Brackets

keep cord out-of-the-way
during transport or storage.

Optional Accessory:

Rear Handle allows for
full control of unit when
navigating through narrow
hallways or doorways.
Heavy-duty handle allows
for full and comfortable grip.

STANDARD PRODUCT SPECIFICATIONS:

CONSTRUCTION. Heliarc welded, single

unit construction of stainless steel;
20-gauge polished exterior, 22-gauge
stainless steel interior with easy-to-clean
coved corners. Welded tubular base frame.
INSULATION. "Ultra-Guard" UG-26 high
density fiberglass insulation throughout;
top, back, bottom, sides and door(s).
DOORS AND LATCHES. Flush mounted,
double pan, stainless steel doors shall
have 1” thick fiberglass insulation. High
temperature door gasket mounted on
cabinet. Door latch shall be edgemounted,
full grip, and positive closing. Each door
shall have two (2) heavy-duty edgemount
die cast hinges.
CASTER MODELS. Maintenance free
polyurethane tire casters in a configuration
of two (2) rigid and two (2) swivel with
brake. Casters shall have a reinforced
yoke mounted to 10-gauge caster plate.
The caster mounting plate shall be secured
to a 10-gauge stainless steel reinforcing
stress plate via welded in place stainless
steel studs. The reinforcing stress plates
shall be welded to the heavy gauge tubular
frame of the unit.

STAINLESS STEEL RACK.

Cabinet rack accommodates 12" x 20"
Pans, GN1/1 Pans, and GN 2/1 Pans
at 1.5" (38mm) fixed spacings. Rack
is removable and shall easily lift off
heavy-duty stainless steel brackets
without the use of tools for cleaning.
SHELVES. Three (3) shelves are included
per compartment. Shelves are triple
plated, welded rod-type. Shelves
adjustable and removable allowing for
banquet plates, 18" x 26" sheet trays,
baker’s pans, or versatile shapes and
sizes of trays and pans.

HEATING SYSTEM/CONTROLS.

Radiant heat system shall include an
Incoloy nickel-chromium alloy heating
element. Controls shall be up-front,
recessed and shall include a full range
adjustable thermostat. Thermostat shall
include temperature scale marked in
ten degree increments (F/C) from 90°F
to 190°F (30° to 90°C). An operational
range thermometer, power supply light and
thermostat cycling light are also included.

ELECTRICAL CHARACTERISTICS.

3 wire grounded 10 foot extension power
cord and plug, rear mounted for safety.
See electrical data chart for amperage and
receptacle configuration. Dedicated circuit.

Optional Accessories:

 Work flow handle
 220 volt, 50/60 Hz,

single phase

 CE compliant
 See-thru Lexan door
 Pass-thru door
 Key locking door latch
 Magnetic latch
 Padlocking transport latch
 Door vents
 Left hand door hinging
 Lift-off door hinges
 Hinged 270° door swing
 Security packages
 All swivel or larger casters
 Door edge trim
 Menu card holder
 Push-pull bar
 Tubular handles
 Cord winding bracket
 Stainless steel lift handles
 Full extension bumper
 Corner bumpers
 6" floor legs
 Shelves
 Custom fixed spacings

Rear View

Shown With Cord Winding

Bracket, Rear Handle,
and All Swivel Casters

Optional Accessories

Optional Accessory:

Full length integral

Work Flow Handle

is easy to grip at
any point along door.

Optional Accessory:

Change directions easily
with All Swivel Casters,
allowing for full cabinet
rotation and tight turns
on various surfaces.

HLC-2127-9

Shown With Lexan Door

and Work Flow Handle

Optional Accessories

HLC-2127-6

Shown With Door Vent

Optional Accessory