Food Warming Equipment Company HHC-CC-201ELX Service Manual

Home Page

Product Overview

Specification Page: S2–9

PROJECT: MODEL: QUANTITY: ITEM NO:

Quick Link Directory

COMBI-COMPANION

Heated Holding Cabinet for Combi Oven Racks

COMBI-COMPANION “HHC-CC SERIES”

A “Combination Oven” produces many unique
benefits for many operations; however, because of
the expense associated with a Combi oven, their role
as a heated holding cabinet detracts from the overall
profitability. Often times, the invaluable Combi oven
is operating only as a holding cabinet for the
foods that were just cooked in them!

Thus, the demand is created for a Combi-Companion
Holding Cabinet to increase a kitchen’s
“Combination Oven” flexibility and production.
Look no further . . . FWE’s Combi-Companion
Holding Cabinet accepts many full size roll-in
“Combi” Racks that will free-up your
Combination Oven.

Accommodating many of the leading brands’
roll-in “Combination Oven” racks, FWE’s
Combi-Companion Holding Cabinet will
maximize your kitchen’s “Combination Oven”
production and your operation’s bottom line.

FWE answers the
need to “free-up” your
Combi Oven with the FWE
Combi-Companion, sized
to fit your existing rack.

TM

Bulk Food Cabinets
Section 2

HHC-CC-MW

Shown with RATIONAL®Rack

Why use your “Combi” Oven as a holding cabinet?
Allowing your “Combination Oven” to reach it’s
full potential is a simple goal, and with FWE’s
Combi-Companion Heated Holding Cabinet, you
can simply roll in your selected “Combi” rack into
the FWE Heated Holding Cabinet – maximizing
and immediately increasing the capacity of
your “Combi” oven. Easy to use, FWE’s
Combi-Companion Heated Holding Cabinet
is the ideal solution to expand the flexibility
of your kitchen and “Combi” oven.

Close temperature tolerances and even heat
distribution allow for preserved food flavor and
textures through out the interior of the cavity.
FWE has a unit that will cover any operations
requirement.

Contact FWE to find out if your Combi Oven
operation can benefit from FWE’s
Combi-Companion Holding Cabinet and
add bottom line profits effortlessly.

◊

Top Mount built-in heat system

◊

Gasketless door

◊

All stainless steel

◊

All welded construction - no rivets

◊

Welded base frame

◊

Heavy-duty casters or legs

◊

Easy-to-use, up-front controls

◊

Heavy-duty door latch & hinges

◊

Fully insulated throughout

◊

Two year limited warranty

U

®

L

U

C

L

®

Stainless

Steel

made to serve you better

NSF

®

PROJECT: MODEL: QUANTITY: ITEM NO:

Heated Holding

SPECIFICATIONS:

COMBI-COMPANION

Cabinet

▲

"H"

▼

COMBI-COMPANION COMBI-COMPANION

HHC-CC HHC-CC MW

MODEL
NUMBER

HHC-CC-201SCC

Stationary Combi-Companion

®

HHC-CC-201SCCMW

Mobile Combi-Companion

HHC-CC-202SCC

Stationary Combi-Companion

RATIONAL

HHC-CC-202SCCMW

Mobile Combi-Companion

CAPACITY: TYPICAL BRAND

OF FULL SIZE RACK

ACCOMMODATES ROLL-IN RACK

RATIONAL

RATIONAL

RATIONAL

RATIONAL

®

201 SCC Rack

®

201 SCC Rack

®

202 SCC Rack

®

202 SCC Rack

❏

MUST SPECIFY BRAND AND MODEL OF
ROLL-IN RACK AT TIME OF ORDER TO
ASSURE CABINET COMPATIBILITY
AND DOCKING ALIGNMENT OF RACK.

OR

LEGS

6''

LEGS

5''

6''

LEGS

5''

CLASS 100

SHIP

WT.
LBS.
(KG)

495

64.98

(224)

(1.84)

495

(224)

(1.84)

495

64.98

(224)

(1.84)

495

(224)

CUBIC

FEET

(m3)

64.98

64.98
(1.84)

OVERALL EXTERIOR

DIMENSIONS IN. (mm)

HIGH

79"

(2007)

(2007)

79"

(2007)

(2007)

"H"

79"

79"

DEEP

"D"

34.25"
(870)

34.25"
(864)

34.25"
(870)

34.25"
(864)

WIDE

"W"

41.5"

(1054)

41.5"

(1054)

41.5"

(1054)

41.5"

(1054)

CASTERS

NO.

OF

DOORS

1

1

CASTERS

1

1

CASTERS

PERFORMANCE VALUES

T

190°
170°

E

150°
130°

M

110°

P

PREHEAT

RECOVERY

VOLTS
WATTS
AMPS
HERTZ
PHASE

PLUG

USA

PLUG

CANADA

DEDICATED CIRCUIT.

RECOVERY

•

•

PREHEAT

70°

ELECTRICAL DATA

TIME

5 10 15 20 25 30 35

75°F to 170°F
APPROX. 16 MIN.

120°F to 170°F
APPROX. 10 MIN.

208 220-240

3570 4605

17.2 19.2

50 / 60 50 / 60

Single Single

6-20P 6-20P

6-30P 6-30P

G

G

G

HHC-CC-201ELX

®

Stationary Combi-Companion

HHC-CC-201ELXMW

Mobile Combi-Companion

HHC-CC-202ELX

Stationary Combi-Companion

ELECTROLUX

HHC-CC-202ELXMW

Mobile Combi-Companion

CONSTRUCTION. Heliarc welded,
single unit construction of stainless steel;
18-gauge polished exterior, 22-gauge
stainless steel interior with easy-to-clean
coved corners. Welded tubular base frame
shall be 1" square, heavy gauge stainless
steel tubing, with 10-gauge stainless steel
reinforcing plates at corners.
INSULATION. “Ultra-Guard” UG-26 high
density fiberglass insulation throughout;
top, back, bottom, sides, and door(s),
with a minimum of 2" and up to 4".
DOORS AND LATCHES. Flush mounted,
double pan stainless steel insulated
gasketless door. Heavy-duty edge mount
full grip magnetic door latch with
heavy-duty hinges, three (3) die-cast
edgemount hinges per door.

ELECTROLUX

ELECTROLUX

ELECTROLUX

ELECTROLUX

HEATING SYSTEM / CONTROLS. Shall be top
mounted and include multiple Incoloy sheathed
heating elements that provide fast heat up and
accurate temperature set points. Forced air
blower system shall include two (2) Hi-Temp,
self-lubricated, impedance protected, fan-cooled
blower motors to distribute heat equally
throughout cabinet interior. Heating element
shall be located in top heat chamber separated
from food cabinet. Wall heat distribution tunnels
shall be vented for balanced air circulation.
Unique precision venting baffle duct system
for even, efficient heat throughout the entire
cabinet. Unit is high limit switch protected.
Controls shall be up-front, recessed and
shall include a thermostat from 90° to 190°F
(30° to 90°C), thermometer, heat cycle
indicator light, master ON/OFF switch.

®

201 Trolley

®

201 Trolley

®

202 Trolley

®

202 Trolley

79"

(2007)

79"

(2007)

79"

(2007)

79"

(2007)

6''

495

34.25"
(870)

34.25"
(864)

34.25"
(870)

34.25"
(864)

41.5"

(1054)

41.5"

(1054)

41.5"

(1054)

41.5"

(1054)

1

1

1

1

LEGS

5''

CASTERS

6''

LEGS

5''

CASTERS

(224)

495

(224)

495

(224)

495

(224)

64.98
(1.84)

64.98

(1.84)

64.98
(1.84)

64.98
(1.84)

STATIONARY COMBI-COMPANION:
LEGS. Heavy-duty stainless adjustable legs,

each mounted to a 10-gauge reinforcement plate,
which is welded to 14-gauge tubular base frame.

MOBILE COMBI-COMPANION:
CASTERS. Maintenance free polyurethane tire

casters in a configuration of two (2) rigid and
two (2) swivel with brake. Casters shall have a
reinforced yoke mounted to 10-gauge caster
plate. The caster mounting plate shall be secured
to a 10-gauge stainless steel reinforcing stress
plate via welded in place stainless steel studs.
The reinforcing stress plates shall be welded to
the heavy gauge tubular frame of the unit.

PUSH BARS HANDLES. Heavy-duty, 1" diameter
tubular stainless steel push handles. One (1) at
rear of unit and one (1) at each side of unit.

Combi-Companion
designs to accommodate
other brands, makes and
models of roll-in racks may
be available. Specify brand
and model. Consult factory.

® Registered trademarks. All trademarks are
the property of their respective owners.

ELECTRICAL CHARACTERISTICS.

3 wire grounded 10 foot extension power
cord and plug, rear mounted for safety.
See chart above for amperage and
receptacle configuration. Dedicated circuit.

SPECIFY AT TIME OF ORDER:

■

Brand and Model of Roll-In Rack

OPTIONAL ACCESSORIES:

■

Door Vents

■

Transport Latch

FWE Products are used by major
companies world-wide. We can
modify, design, or custom build
equipment to fit your special
requirements.

Food Warming Equipment Company, Inc.

P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: [phone]

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change without notice.
©10H Food Warming Equipment Company. Inc.