Food Warming Equipment Company F-30 Service Manual

Home Page
Product Overview
Specification Page: S11–5
PROJECT: MODEL: QUANTITY: ITEM NO:
Quick Link Directory
MOBILE FREEZERSi
For Various Size Trays, Pans, and Gastro-Norm
“F SERIES” and “UFS SERIES”
FWE Tray Slides Tested and Approved
to meet the NSF International
Corrosion Resistance requirements under
NSF Std 51/ASTM B117
Sections 6.2 and 6.2.1
F-30
Specifically designed engineered f
or transport applications for banquets, hotels, convention centers, institutions, and satellite operations.
TM
Mobile Refrigeration Section 11
UFS-10
Built like no other freezer available, these units address the most demanding and punishing environments. Stationary or reach-in units are while FWE’s construction absorbs vibration and shock during transport.
Our forced air “COLD-TEMP” system maintains a balanced temperature which gently circulates the cold air evenly throughout the cabinet. FWE tray slides are designed so they cannot block the flow of cold/moist air.
Exclusive “Food Sentry” easy-to-use controls offer the ultimate performance and accurate cabinet temperatures. Continuously intuitive self-defrosting cold system convenient and user friendly.
The versatile “UFS” model holds a greater variety and capacity of universal trays and pans, including Gastro-Norm.
Both these single door mobile freezers have the same high quality features and construction that have made FWE the “Choice of the Professionals.”
with on demand override
not
made to be moved –
make operation
Exclusive “Food Sentry” recessed electronic controls with digital display
“Cold-Temp” system with automatic
Smart Defrost
All stainless steel
All welded construction - no rivets
Tubular stainless steel welded base frame
Full extension bumper
Heavy-duty polyurethane casters
Heavy-duty hinges
Positive close door latch
Heavy-duty push bar handles
Gasket sealed doors
Fully insulated throughout
Removable tray slides
Two year limited warranty
U
L
®
with manual override
L
®
Stainless
Steel
made to serve you better
U
C
®
PROJECT: MODEL: QUANTITY: ITEM NO:
MOBILE FREEZERS
SPECIFICATIONS:
"W"
6'
5'
4'
3'
2'
1'
"D"
"H"
TOP
F-30 UFS-10
DOOR
SWING:
25-1/2"
TOP
DOOR
SWING:
28"
RECALL
TEMP
SETTINGS
MASTER
ON/OFF
DIGITAL
TEMP
DISPLAY
ADJUSTABLE
“ON” and “CYCLE”
INDICATOR LIGHTS
TEMP
FACTORY PRESET AT 15°F (-9.4°C).
For various size trays and pans
ON DEMAND MANUAL DEFROST
WITH INDICATOR LIGHT
ADJUSTABLE TEMP
5°F TO 32°F (-15°C TO 0°C):
PERFORMANCE VALUES
T
75° 65°
E
55° 45°
M
35°
P
PRECOOL
RECOVERY
Precool Time is based on interior cabinet at 75°F. Values are for smallest model listed.
RECOVERY
10 20 30 40 50 60 70
PRECOOL
75°F to 15°F APPROX. 35 MIN.
40°F to 15°F APPROX. 15 MIN.
TIME
CAPACITIES OF TRAYS / PANS:
STANDARD CAPACITY: NUMBER OF TRAYS / PANS
4.5"
Spacings
@
MODEL NUMBER
F-30
UFS-10
[A] Uprights punched on 1.5" (38 mm) centers. Tray slides are adjustable.
F-30 and UFS-10 are available with the Pass-thru Door [add “P”] and/or Dutch Doors [add “D”]. Dutch Door: 2 half size doors.
CONSTRUCTION. Heliarc welded, single
unit construction of stainless steel; 20-gauge polished exterior, 24-gauge stainless steel interior with easy-to-clean coved corners. Welded tubular base frame shall be 1" square, heavy gauge stainless steel tubing, with 10-gauge stainless steel reinforcing stress plates at corners. INSULATION. “Ultra-Guard” UG-26 high density fiberglass and foam insulation throughout. PUSH BAR HANDLES. Heavy-duty, solid formed 1" x .375" thick; mounted at each end of unit. Mountings reinforced with stainless steel channel. BUMPER. Solid 1.5" wide continuous wraparound aluminum channel, bolted to frame, with snap-in, non-marking replace­able vinyl cushion. Full perimeter bumper extends beyond doors, handles, etc., for added protection. Shall be continuous, with corner cut-outs to facilitate cleaning.
TRAY/PAN
SLIDES
PROVIDED
10 pr
10 pr
18 x 26
10 10 20 - - - - 10
10 20 20 20 10 20 10 20
(114 mm)
12 x 20
14 x 18
12 x 18
4.5" (114 mm)
20 x 22
10 x 20
Spacings are Standard
[A]
OPTIONAL CAPACITY: NUMBER OF TRAYS / PANS
@ 3" Spacings (76 mm)
TRAY/PAN
SLIDES
(Additional )
GN2/1
GN1/1
15 pr (5 pr)
15 pr (5 pr)
REQUIRED
18 x 26
12 x 20
14 x 18
15 15 30 - - - - 15
15 30 30 30 15 30 15 30
12 x 18
20 x 22
10 x 20
GN2/1
OVERALL EXTERIOR
DIMENSIONS IN. (mm)
HIGH
"H"
GN1/1
73.5"
(1867)
73.5"
(1867)
DOORS AND LATCHES. Flush mounted, stainless steel insulated doors shall be gasket sealed. Each door shall have two (2) heavy-duty edgemount die cast hinges. Door latch shall be edgemounted, full grip, and positive closing. The hinge and latch mountings are reinforced with stainless steel backing plates. CASTERS. Maintenance free polyurethane tire casters in a configuration of two (2) rigid and two (2) swivel with brake. Casters shall have a reinforced yoke mounted to 10-gauge caster plate. The caster mounting plate shall be secured to a 10-gauge stainless steel reinforcing stress plate via welded in place stainless steel studs. The reinforcing stress plates shall be welded to the heavy gauge tubular frame of the unit. TRAY SLIDES. Welded rod-style tray slide design provides maximum air flow. Slides shall be fully adjustable/removable, and designed to give secure bottom tray support. Tray slides are polymer coated,
tested and approved to meet the NSF International Corrosion Resistance requirements under NSF Std 51/ASTM B117
Sections 6.2 and 6.2.1.
Removable stainless
WIDE
DEEP
"D"
36.5"
31.25"
(927)
(794)
36.5"
34.5"
(927)
(876)
spacings, for easy tray adjustment, and shall easily lift off heavy-duty stainless steel brackets, without the use of tools. COLD-TEMP SYSTEM / CONTROLS. Continuously intuitive defrost system with on demand defrost and override. Self contained evaporator coil with thermal expansion valve, heavy-duty circulation fans, de-ice controls, condensation lines and stainless steel pan. Condensing unit with 1/3 HP Hi-torque air cooled compressor and filter drier. System uses environmen­tally safe non-CFC 404A refrigerant FOR MAXIMUM PERFORMANCE. Controls shall include an easy to read digital display of cabinet temperature (with recall capability of temperature set point and actual cabinet temperature), master ON/OFF button with power indicator light, cooling cycle indicator light, ON DEMAND DEFROST with defrost cycle indicator light. Adjustable temperature range from 5°F to 32°F (-15°C to 0°C) factory preset at 15°F (-9.4°C).
ELECTRICAL CHARACTERISTICS.
3 wire grounded 10 foot extension power cord and plug, side mounted for safety. See electrical data chart above for amperage and receptacle configuration. Dedicated circuit.
steel uprights shall be punched on 1.5" (38 mm)
Food Warming Equipment Company, Inc.
P.O. Box 1001 Crystal Lake, IL 60039 USA 800-222-4393; 815-459-7500 Fax: 815-459-7989
Manufacturing Facilities: 7900 S. Route 31 Crystal Lake, IL 60014 USA www.FWE.com sales@fweco.net
"W"
CLASS 110
NO.
CASTER
OF
SIZE
DOORS
1 6"
1 6"
SHIP WT .
LBS. (KG)
415
(189)
425
(193)
ELECTRICAL DATA
VOLTS 120
WATTS 900
AMPS 7.5
HERTZ 50 / 60
PHASE Single
NEMA PLUG 5-15P
Dedicated circuit.
G
Optional Accessories:
220 volt, 50/60 Hz, single phase
CE compliant
Cold plate cartridge
Dutch doors
Pass-thru door
Glass door
Key locking door latch
Magnetic latch
Paddle latch
Padlocking transport latch
Left hand door hinging
Security packages
All swivel or larger casters
Door edge trim
Floorlock (requires 6" casters)
Extra tray slides
“Ultra-Universal” transport slides
for Model UFS-10
FWE Products are used by major companies world-wide. We can modify, design, or custom build equipment to fit your special requirements.
FWE products may be covered under one or more of the following U.S. patents: 288,299;238,300;3,952,609;4,192,991.
All specifications subject to change without notice. ©07F Food Warming Equipment Company. Inc.
Loading...