Food Warming Equipment Company ETC-UA-10PH Specifications
Home Page
Product Overview
Specification Page: S5–3
PROJECT: MODEL: QUANTITY: ITEM NO:
Quick Link Directory
PROOFER/HEATER ETC CABINETS
Proofing Module for Various Size Trays, Pans, and Gastro-Norm
REMOVABLE
“ETC-UA-PH SERIES”
❏ Non-Insulated Cabinet
❏ Insulated Door
❏ Removable Proofer/Heater Module
❏ Universal Tray Slides
Adjustable Slides accomodate:
- One (1) 18"x 26" Tray per ledge, or
- Two (2) 12"x 20" Pans per ledge
With removable water pan
secured by strap that doubles as handle
Thermometer
Heat control
Economy, non-insulated
cabinet with E-Z removable
proofer/heater module.
Proofer/Heater Cabinets
Section 5
TM
ETC-UA-4PH
REMOVABLE
PROOFER/HEATER
MODULE
Where non-insulated units are required
and/or a Removable Heat System is desired,
FWE offers this self-contained heat system.
The amount of warmed moisture in the
cabinet is regulated by the control dial with
settings marked “Low” to “High”. The cabinet
temperature is regulated by the control dial
with settings from 90°F to 190°F. To “Proof”,
add water to the water pan at the Medium
High setting and maintain the cabinet at 95°F.
If dry heat is needed for other holding
applications,
be used either wet or dry – unlike other
competitive products
Durable stainless steel takes the abuse of
transport applications and allows for sanitary
maintenance. Casters are mounted to
reinforcement plates for added durability
and take the impact over thresholds.
Built tough from stainless steel for
continuous demanding use.
it does not harm the unit to
.
Main Power
On/Off Switchr
Humidity control
Cord winding brackets
◊
Removable proofer/heater system
◊
Separate controls for heat and humidity
◊
All stainless steel
◊
All welded construction - no rivets
◊
Tubular stainless steel welded base frame
◊
Heavy-duty polyurethane casters
◊
Removable, oversized humidity reservoir
◊
Heavy-duty hinges
◊
Positive close door latch
◊
Hi-temp door gasket
◊
Universal tray slides
◊
Recessed hand grips
◊
Insulated door
◊
Two year limited warranty
U
®
L
U
C
L
®
Stainless
Steel
made to serve you better
NSF
®
PROJECT: MODEL: QUANTITY: ITEM NO:
SPECIFICATIONS:
6'
▲
5'
4'
3'
"H"
2'
1'
▼
ETC-UA-4PH ETC-UA-6PH ETC-UA-10PH ETC-UA-12PH
Under Counter
CAPACITIES OF TRAYS / PANS:
▲
"D"
▼
4.5'' (114 mm)
STANDARD CAPACITY: NUMBER OF TRAYS / PANS
@
4.5''
Spacings
(114 mm)
MODEL
NUMBER
ETC-UA-4PH
Under Counter
ETC-UA-6PH
ETC-UA-10PH
ETC-UA-12PH
[A] Tray slides accommodate: (1) 18" x 26",
[B] Uprights punched on 1-1/2"
•
Dutch Doors [add “D”] are 2 half size doors available on the full-size models.†
•
See-thru Lexan Door [add “L”] is available on all model sizes.
Removable Proofer/Heater System: Overall exterior dimensions: Height: 6" (152mm) / Depth: 19" (483mm) / Width: 21.25" (540mm) / Weight: 26 lbs (12kg)
TRAY/PAN
SLIDES
PROVIDED
4 pr
6 pr
10 pr
†
12 pr
†
18 x 26
Baguette
12 x 20
14 x 18
12 x 18
20 x 22
10 x 20
GN 2/1
GN 1/1
4488848484
6 6 12 12 12 6 12 6 12 6
10 10 20 20 20 10 20 10 20 10
12 12 24 24 24 12 24 12 24 12
(38 mm)
(1) Baguette/French Bread Form 18" x 26", (2) 14" x 18" trays, (2) 12" x 20", (1) GN 2/1, (2) GN 1/1, (1) Maxi-Pan.
centers. Tray slides are adjustable. Number of tray slides are listed above. Standard spacings are
TRAY/PAN
SLIDES
REQUIRED
MAXI-PAN
5 pr (1 pr)
9 pr (3 pr)
14 pr (4 pr)
17 pr (5 pr)
"W"
▲
TOP
DOOR SWING: 23"
Spacings are Standard
OPTIONAL CAPACITY: NUMBER OF TRAYS / PANS
@
3''
Spacings
(Additional )
18 x 26
Baguette
5 5 10 10 10 5 10 5 10 5
9 9 18 18 18 9 18 9 18 9
14 14 28 28 28 14 28 14 28 14
17 17 34 34 34 17 34 17 34 17
PROOFER MODULE ETC CABINET
*
PERFORMANCE VALUES
T
190°
RECOVERY
170°
•
•
▲
[A]
(76 mm)
12 x 20
14 x 18
E
150°
130°
M
110°
P
70°
PREHEAT
RECOVERY
* Values are for mid-size model listed.
12 x 18
20 x 22
10 x 20
GN2/1
GN1/1
MAXI-PAN
PREHEAT
TIME
5 10 15 20 25 30 35
75°F to 170°F
APPROX. 14 MIN.
120°F to 170°F
APPROX. 6 MIN.
OVERALL EXTERIOR
DIMENSIONS IN. (mm)
DEEP
“D”
30.5''
(775)
30.5''
(775)
30.5''
(775)
30.5''
(775)
WIDE
“W”
24.5''
(622)
24.5''
(622)
24.5''
(622)
24.5''
(622)
HIGH
“H”
33.5''
(851)
44.5''
(1130)
60.5''
(1537)
69.25''
(1759)
ELECTRICAL DATA
2200 4270
18.3 17.8
50 /60 50 /60
Single Single
5-20P 6-20P
5-30P 6-30P
Consult Factory for
SHIPPING CLASS
CASTER
OF
SIZE
5''
5''
5''
5''
120 220-240
VOLTS
WATTS
AMPS
HERTZ
PHASE
PLUG
USA
PLUG
CANADA
Dedicated circuit
NUMBER
DOORS
1
1
1
1
(114 mm).
G
G
SHIP WT.
LBS.
(KG)
170
(78)
200
(90)
250
(114)
280
(126)
G
G
CUBIC
FEET
(m3)
14.48
(.41)
19.24
(.54)
26.16
(.74)
29.94
(.85)
CONSTRUCTION. Heliarc welded, single unit
construction of 18-gauge stainless steel;
Welded tubular base frame shall be 1" square, heavy
gauge stainless steel tubing, with 10-gauge stainless
steel reinforcing plates at corners and fittings.
DOORS AND LATCHES. Flush mounted, stainless
steel insulated doors. High temperature gasket sealed;
gasket shall be cabinet mounted. Each door shall have
two (2) heavy duty edgemount die cast hinges. Door
latch shall be edgemounted, full grip, and positive
closing. The hinge and latch mountings are reinforced
with stainless steel backing plates.
HANDLES. Full-size, form-fitting recessed hand grips
shall be mounted on each side of cabinet.
CASTERS.
Maintenance free
CASTERS.
polyurethane tire casters in a configuration of two
(2) rigid and two (2) swivel with brake. Casters
shall have a reinforced yoke mounted to 10-gauge
caster plate. The caster mounting plate shall be
secured to a 10-gauge stainless steel reinforcing
stress plate via welded in place stainless steel
studs. The reinforcing stress plates shall be welded to the heavy gauge tubular frame of the unit.
TRAY SLIDES. Welded rod-style tray slides are
stainless steel for greater durability and sanitation.
Fully adjustable / removable and designed to give
secure bottom tray support. Removable stainless
steel uprights shall be punched on 1.5" (38 mm)
spacings for easy tray adjustment, and shall easily
lift off heavy-duty stainless steel brackets without
the use of tools for cleaning.
REMOVABLE PROOFER/HEATER SYSTEM AND
CONTROLS. Forced air heating system shall be
completely removable for convenience and
sanitation. System shall include two (2) separate
long life Incoloy nickel chromium alloy heating
elements; separate, adjustable controls shall be
provided for each function: One to control the
interior air temperature, and one to control the
interior air moisture with hydro immersion waterbath.
Food Warming Equipment Company, Inc.
P.O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: 815-459-7989
A stainless steel water reservoir shall be
removable for ease of cleaning/sanitation.
System shall have a Hi-temp, self-lubricated,
impedance protected fan-cooled blower motor
for moist air distribution. Controls shall include
adjustable air temperature control (to 190°F.),
adjustable moisture control (Low to High),
20 amp ON/OFF power switch, operational
range thermometer.
ELECTRICAL CHARACTERISTICS.
3 wire grounded 10 foot extension power cord
and plug. See electrical data chart above for
amperage and receptacle configuration.
Dedicated circuit.
FWE Products are used by major
companies world-wide. We can
modify, design, or custom build
equipment to fit your special
requirements.
Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com sales@fweco.net
Optional Accessories:
CE compliant
■
Heat retention battery
■
Dutch doors
■
See-thru lexan door
■
Key locking door latch
■
Magnetic latch
■
Paddle latch
■
Padlocking transport latch
■
Left hand door hinging
■
Security packages
■
Full extension bumper
■
Corner bumpers
■
Heavy-duty push-pull handles
■
All swivel or larger casters
■
Door edge trim
■
Cold plate cartridge
■
Floorlock (requires 6" casters)
■
Extra tray slides
■
“Ultra-Universal”
■
transport slides
FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.
All specifications subject to change without notice.
©10E Food Warming Equipment Company. Inc.
Loading...