Food Warming Equipment Company ETC-1826-11 INS Service Manual

Home Page

Product Overview

Specification Page: S10–12

PROJECT: MODEL: QUANTITY: ITEM NO:

Quick Link Directory

ENCLOSED TRANSPORT CABINETSi

Insulated Utility Transport for 18" x 26" Trays

“ETC-1826 INS SERIES”

❏ Non-Heated (Ambient)

❏ Insulated

❏ 18" x 26" Tray Rack,

Fixed Spacings

ETC-1826-7 INS

FWE’s all stainless steel
transport is built tough
for all purpose transport
and storage. Fully insulated
for hot or cold transport.

Queen Marys & Utility Carts
Section 10

TM

ETC-1826-16 INS

FWE’s heavy-duty single door tray cabinet is
fully enclosed and designed for fast tray access.
Built for mobility, FWE’s unibody construction keeps
the cabinet balanced and stable during transport.
One piece rack and upright assembly make it
easy and sturdy to transport 18" x 26" trays.

FWE transport cabinets are fully insulated, including
the bottom floor base of the cabinet - not just the
door, as in some competitive models.

Our internal frame construction is designed
to endure the most rigorous operations and
environments, eliminating cabinet torquing
during transport, assuring FWE cabinets last
longer than any other –

Durable stainless steel takes the abuse of
transport applications and allows for sanitary
maintenance. Casters are mounted to
reinforcement plates for added durability
and take the impact over thresholds.
Built tough from stainless steel for continuous
demanding use, FWE is the “Choice of
Professionals”.

period!

ETC-1826-7INS Tray Rack

with 3" Fixed Spacings

(One side of a pair)

◊

All stainless steel

◊

All welded construction - no rivets

◊

Tubular stainless steel welded base frame
Heavy-duty polyurethane casters

◊
◊

Heavy-duty hinges

◊

Positive close door latch

◊

Hi-temp door gasket

◊

Recessed hand grips

◊

Fully insulated

◊

Removable tray rack assembly

at fixed 3" spacings

◊

Two year limited warranty

Stainless

Steel

made to serve you better

NSF

®

PROJECT: MODEL: QUANTITY: ITEM NO:

SPECIFICATIONS:

6'

▲

5'

4'

3'

"H"

2'

1'

▼

CAPACITIES

MODEL
NUMBER

Insulated Utility Transport Cabinets

ETC-1826-7 INS

Under Counter

ETC-1826-11 INS

ETC-1826-16 INS

ETC-1826-19 INS

† Dutch Doors are available on the full-size models. Add “D” for the Dutch Door optional accessory.

Dutch Door models have 2 half size doors.

All model sizes are available with the Pass-thru Door [add “P”] and/or See-thru Lexan Door [add “L”] optional accessories.

3" FIXED SPACING

TRAY / PAN CAPACITY

7 - 18” x 26” trays / pans

11 - 18” x 26” trays / pans

16 - 18” x 26” trays / pans

†

19 - 18” x 26” trays / pans

†

ENCLOSED TRANSPORT CABINETS

▲

"W"

▲

▲

TOP

"D"

▼

ETC-1826-7 INS ETC-1826-11INS ETC-1826-16 INS ETC-1826-19 INS

Under Counter

OVERALL EXTERIOR

DIMENSIONS IN. (mm)

DEEP

"D"

"

32.5

(826)

32.5

"

(826)

"

32.5
(826)

"

32.5

(826)

WIDE

"W"

23.5

(597)

23.5
(597)

23.5
(597)

23.5
(597)

HIGH

"H"

34.75
(883)

45''

(1143)

61.75

(1568)

70.5

(1790)

"

"

"

Consult Factory for

SHIPPING CLASS

NO. OF

DOORS

"

1 5"

"

1 5"

"

1 5"

"

1 5"

CASTER

SIZE

DOOR SWING: 20"

SHIP WT .

LBS.
(KG)

150

(68)

185
(84)

235

(106)

265

(120)

CONSTRUCTION. Heliarc welded, single unit
construction of stainless steel; 20-gauge polished
exterior, 22-gauge stainless steel interior with
easy-to-clean coved corners. Welded tubular
stainless steel base frame with extra-heavy tubing.
10-gauge stainless steel reinforcing plates at
corners and fittings.
INSULATION. “Ultra-Guard” UG-26 high density
fiberglass insulation throughout; top, back,
bottom, sides, and door(s).
DOORS AND LATCHES. Flush mounted, stainless
steel insulated doors. High temperature gasket

HANDLES. Full-size, form-fitting recessed hand
grips shall be mounted on each side of cabinet.

CASTERS.

tire casters in a configuration of two (2) rigid
and two (2) swivel with brake. Casters shall
have a reinforced yoke mounted to 10-gauge
caster plate. The caster mounting plate shall
be secured to a 10-gauge stainless steel
reinforcing stress plate via welded in place
stainless steel studs. The reinforcing stress
plates shall be welded to the heavy gauge

tubular frame of the unit.
sealed; gasket shall be cabinet mounted. Each door
shall have two (2) heavy-duty edgemount die cast
hinges. Door latch shall be edgemounted, full grip,
and positive closing. The hinge and latch mountings
are reinforced with stainless steel backing plates.

Food Warming Equipment Company, Inc.

P. O. Box 1001
Crystal Lake, IL 60039 USA
800-222-4393; 815-459-7500
Fax: [phone]

TRAY RACK ASSEMBLY. Unitized tray
rack assembly shall be heavy gauge stainless

Maintenance free polyurethane

steel, channels fixed in place at 3" spacings.
Assemblies are designed to accommodate
one (1) 18" x 26" tray. Removable stainless
steel uprights shall easily lift off heavy-duty
stainless steel supports without the use of tools.

FWE Products are used by major
companies world-wide. We can
modify, design, or custom build
equipment to fit your special
requirements.

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

Optional Accessories:

Heat retention battery

■

“Convert-a-Unit” for

■

canned fuel use
Heavy-duty push pull handles

■

Dutch doors

■

See-thru Lexan door

■

Pass-thru door

■

Key locking door latch

■

Magnetic latch

■

Paddle latch

■

Padlocking transport latch

■

Left hand door hinging

■

Security packages

■

All swivel or larger casters

■

Door edge trim

■

Full extension bumper

■

Corner bumpers

■

Cold plate cartridge

■

Floorlock (requires

■

6" casters)
Adjustable tray

■

slide assembly

FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change wlthout notice.
©10D Food Warming Equipment Company. Inc.