Food Warming Equipment Company BBC-5 Service Manual

L

L

C

C

H

H

P

PP

P

PProfessional Series

LAMINATE EXTERIOR

Home Page

Product Overview

Specification Page: S12–7

PROJECT: MODEL: QUANTITY: ITEM NO:

Quick Link Directory

MOBILE BARS & BACK-UPi

For Beverage Service Using Pre-Mix / Post-Mix / Bag-in-Box

PROFESSIONAL “BBC SERIES”

Exterior with Stainless Steel Working Side

BBC-88

IC-222

Ice Storage Cart

BBC-88-PO

Shown with optional

Post-Mix Dispensing System

High volume dispensing
made simple from the
“Toughest Bar In Town”!

Mobile Bars & Back-Up
Section 12

TM

Designed for a wide range of high performance
dispensing systems, our attractive and functional
“BBC Series” Mobile Bars maximize the profitability
of any operation by eliminating the need for costly,
messy bottle service. Drink dispensing is fast and
easy - beverage tanks can be replaced in seconds.
The acknowledged favorite of leading Hotels,
Restaurants, Clubs and Convention Centers, FWE
Pre-Mix / Post-Mix Mobile Bars have a super-sanitary
sealed-in cold plate sink, with a big 60 lb. ice
capacity. Built tough to stand up under years of
continuous use, our top and bottom, precision welded
tubular base frames prevent sagging or twisting.

The sleek black top and the Walnut, Oak, Black, or
Cherry laminate exterior finishes are standard* with
optional laminate selections available to meet your
special decor. Custom laminates are available to
enhance or match existing colors at most any
establishment. Back up your bar service with a
matching back bar and ice cart, which are perfect
companions to any FWE mobile bar. For years
of reliable, profitable service, ask for FWE
“Prestige Series” - the “Toughest Bar in Town”.

*

WALNUT

one of the other finishes has been specified.

Specify Dispensing System Sink and Fittings at time of order:

❏
❏
❏

Note: Additional charges for factory installation of beverage dispensing system.

Specify Laminate Exterior at time of order:

❏

laminate exterior will be provided unless

“PR” for Pre-Mix Dispensing System
“PO” for Post-Mix Dispensing System
“PO-BIB” for Post-Mix Bag-in-Box Dispensing System

Walnut

* ❏

Oak❏Black❏ Cherry❏ Custom

◊

Welded steel top and bottom frames

◊

Raised marine front edge retard spills

◊

Rugged polyurethane tire casters

◊

6 circuit sealed-in cold plate sink

◊

60 lb. ice capacity with stainless steel
sliding cover

◊

Stainless steel work surface and splash

area with coved corners

◊

Walnut laminate exterior finish
Black laminate top with bull-nose

◊

rounded corners

◊

Removable bottle speed rack

◊

Handy underbar server with 4 bowls

◊

Towel ring

◊

Tank storage area

◊

Opening(s) for dispensing gun tubing

◊

Tank retainer strap

◊

Two year limited warranty

*

Stainless

Steel

made to serve you better

PROJECT: MODEL: QUANTITY: ITEM NO:

PROFESSIONAL “BBC SERIES” BARS

SPECIFICATIONS:

available with matching Back-Up Bar and Ice Cart

▲

▲

"L"

▲

"D"

▼

▲

"H"

▼

BBC-88 BBC-66 BBC-55

OVERALL EXTERIOR DIMENSIONS IN. (mm)

LONG

"L"

60"

(1524)

62"

(1575)

72"

(1829)

75''

(1905)

96"

(2438)

98"

(2489)

WORKING

AREA

HEIGHT

35.5"
(902)

35.5"
(902)

35.5"
(902)

35.5"
(902)

35.5"
(902)

35.5"
(902)

DEEP

MODEL
NUMBER

BBC-5

(Without Bumper)

BBC-55 with Full Bumper

BBC-6

(Without Bumper)

BBC-66 with Full Bumper

BBC-8

(Without Bumper)

BBC-88 with Full Bumper

[A]

Removable bottle speed rack extends 3.5" beyond depth dimension.

HIGH

"H"

45.5"

(1156)

45.5"

(1156)

45.5"

(1156)

45.5"

(1156)

45.5"

(1156)

45.5"

(1156)

"D"

[A]

26.5"
(673)

28.5"
(724)

26.5"
(673)

28.5"
(724)

26.5"
(673)

28.5"
(724)

PRE-MIX

TANK

4

4

6

6

8

8

CAPACITY

12 qts

12 qts

12 qts

12 qts

16 qts

16 qts

CAPACITY

Consult Factory for

SHIPPING CLASS

BOTTLE

RACK

CASTER

SIZE

[A]

5"

5"

5"

5"

5"

5"

SHIP WT .

LBS.
(KG)

480

(218)

500

(227)

555

(252)

575

(261)

600

(272)

620

(281)

BACK BAR

ICE STORAGE CART

IC-222

Holds 200 lbs. of ice! Fully
insulated. Flip-top stainless
lid. Drain, push bar handle,
and all swivel 5" casters.
Welded steel frame.

PSC-44

Enclosed on 3-sides!
glasses and bar accessories.
Convenient work/serve black
top. Stainless steel interior
shelves on 9.5", 11.5", and 14"
spacings. Welded steel frame.
5" casters.

OVERALL EXTERIOR DIMENSIONS IN. (mm)

"L"

ICE

TANK

CAPACITY

200 lbs

200 lbs

CASTER

SIZE

5"

MODEL
NUMBER

IC-200

(Without Bumper)

IC-222 with Full Bumper

(1156)

(1156)

HIGH

"H"

33.5"

33.5"

DEEP

"D"

24.5"
(648)

26.5"
(673)

LONG

24.5"
(648)

26.5"
(673)

OVERALL EXTERIOR DIMENSIONS IN. (mm)

MODEL
NUMBER

PSC-4

(Without Bumper)

PSC-44 with Full Bumper

HIGH

"H"

45.5"

(1156)

45.5"

(1156)

DEEP

"D"

26.5"
(673)

28.5"
(724)

LONG

(1219)

(1270)

Specify Laminate Exterior at time of order:

❏

Walnut ❏ Oak❏Black❏ Cherry❏ Custom

Walnut will be furnished standard (default) unless one of the other colors are specified.

"L"

48"

50"

CASTER

SIZE

5"

5"

Stores

SHIP WT .

LBS.

(KG)

140
(64)

150

5"

(68)

SHIP WT .

LBS.
(KG)

175
(79)

190
(86)

CONSTRUCTION. Heliarc welded, single unit
construction shall consist of welded stainless steel
base frame of heavy gauge 1" square stainless
steel tubing with extra 10-gauge stainless steel
caster corner plate reinforcements.
BODY / TOP MATERIALS. Front and side panels
shall be high-pressure, dual-side counter-balanced
laminate .75" thick in Walnut finish. Walnut, Oak,
Black, or Cherry laminate finishes are standard.
Walnut will be furnished standard (default) unless
one of the other colors are specified. A full range
of additional laminate selections are available.
Full length, heavy gauge stainless steel angles
reinforce front corners of body on inside, with high
impact edging on outside corners. Work surface
shall be constructed of 20-gauge stainless steel.
Interior of body shall be lined with 24-gauge
stainless steel, bonded to cabinet walls and bottom
storage area. Seams shall overlap for greater

CASTERS. Maintenance free polyurethane
tire casters in a configuration of two (2) rigid
and two (2) swivel with brake. Casters shall
have a reinforced yoke mounted to 10-gauge
caster plate. The caster mounting plate shall
be secured to a 10-gauge stainless steel
reinforcing stress plate via welded in place
stainless steel studs. The reinforcing stress
plates shall be welded to the heavy gauge
tubular frame of the unit. Eight (8) foot models
are equipped with six (6) casters: four (4) rigid
casters and two (2) swivel with brake.
BUMPER MODELS. Full bumper models shall
have solid 1.5" wide continuous wraparound
aluminum channel, bolted to frame, with
snap-in, non-marking replaceable vinyl
cushion. Full perimeter bumper shall be
continuous, for added protection, with

corner cut-outs to facilitate cleaning.
durability and moisture resistance. Work and
splash areas shall be polished stainless steel
with easy-to-clean coved corners. Front edge
shall have raised marine nosing to retard spills.

Food Warming Equipment Company, Inc.

P.O. Box 1001

Crystal Lake, IL 60039 USA

800-222-4393; 815-459-7500

Fax: [phone]

STORAGE AREA. On six (6) foot models, the glass
storage area shall include removable and adjustable
stainless steel shelf. On all models, the bottom
storage area shall be stainless steel lined. Tank
storage area shall accommodate a minimum of
four (4) 5-gallon premix tanks, and CO2tank,
and a tank retainer strap shall be provided.

ICE SINK WITH SEALED IN COLD PLATE.

Sink shall be one-piece stainless steel with coved
corners: 19.75" x 12.75" x 10.5" deep. Sink
shall have enclosed foam insulation with drain
and line fittings. 6 circuit sealed-in cold plate shall
be compatible for use with Pre-Mix, Post-Mix, and
Bag-in-Box systems. Sink shall have a capacity of
60 lbs. of ice, and be provided with a stainless steel
sliding cover. Specify system to be used:
Pre-Mix, Post-Mix or Bag-in-Box.
BAR ACCESSORIES. Standard equipment shall
include 5" deep, heavy gauge stainless steel bottle
speed rack extending 3.5" beyond depth dimension
of 31.5"; removable without tools. Underbar server
shall have four (4) removable condiment holders.
Towel ring shall be provided under top work surface.

Manufacturing Facilities:
7900 S. Route 31
Crystal Lake, IL 60014 USA
www.FWE.com [e-mail]

Optional Accessories:

Locking bottle speed rack

■

Extra stainless steel shelves

■

Locking doors for shelf area

■

Stainless steel bar gutters

■

Pre-Mix dispensing equipment

■

Post-Mix dispensing equipment

■

Bag-in-Box dispensing equipment

■

Protective storage cover

■

All swivel or larger casters

■

All swivel with brake casters

■

FWE Products are used by major
companies world-wide. We can
modify, design, or custom build
equipment to fit your special
requirements.

FWE products may be covered under
one or more of the following U.S. patents:
288,299;238,300;3,952,609;4,192,991.

All specifications subject to change without notice.
©09D Food Warming Equipment Company. Inc.