Food Warming Equipment BBC Installation Manual

OPERATING

INSTRUCTIONS

MOBILE BARS, ICE CARTS

& BACK BARS

“BBC” SERIES - Pre-Mix / Post-Mix / Bag-In-Box

“CB” SERIES - Conventional Bars

Beverage Dispensing System
Descriptions

Bars for Conventional Use of Cans and Bottles

CONVENTIONAL BAR SERVICE uses CANS and BOTTLES of product,

purchased from your local provider or supermarket. This is the simplest
and the most “fool-proof” way to serve soft drinks, since the bottling / can
company has already taken care of preparing the product in the right ratios.

Bars for Pre-Mix Dispensing System

PRE-MIX SYSTEM uses “pre-mixed” (pre-carbonated) soft drinks in

5 gallon tanks, ready to use. PRE-MIX requires installation of dispensing
equipment, which includes a dispensing “gun”, a soda-CO2 regulator,
the water tank, lines and fittings compatible with soda brands.
The system is available from FWE, or beverage supplier of choice
(Coke, Pepsi, etc.) can provide and install the system.

POST-MIX SYSTEM mixes the water, carbonation, and syrup at the
point of dispensing. The water from 5 gallon tanks passes through the
carbonator, creating soda water. This soda water is then mixed with
the concentrate syrup from 5 gallon syrup tanks. Requires dispensing
equipment available from FWE or beverage supplier of choice.

BAG-IN-BOX SYSTEM handles the soft drink just like the POST-MIX
system, but the syrup is provided in 12'' square boxes instead of
5 gallon cylinder shaped tanks. The same equipment lines, gun, and
carbonator are required as above, plus an additional pump per flavor.
Less storage space is required and each box is discarded after use.

1 FWE MOBILE BARS, ICE CARTS, BACK BARS

FWE MOBILE BARS

CONVENTIONAL, PRE-MIX, POST-MIX, OR BAG-IN-THE-BOX

CONGRATULATIONS...

...and thank you for purchasing

an FWE Mobile Bar, Back-Up Bar,

or Ice Cart. Your unit has been

designed and manufactured

under rigid controls to assure you

the most efficient service.

Please take a moment to
read through this booklet

of important information

pertaining to your unit.

By following a routine of

proper use and care described

on the following pages,

your equipment will last

for many years.

IMPORTANT:

Your Manufacturer

Registration Card must be

returned within 30 days after

initial delivery to activate

the warranty.

2

FWE MOBILE BARS

SERIAL TAG

SERIAL AND MODEL NUMBER

These numbers are found on the nameplate (serial tag) affixed
to the unit. Please record them in this booklet, in the space
provided. When ordering parts and/or service, you will need
to provide this information.

UNPACKING

After uncrating your cabinet, remove all tape and padding
which held all doors, shelves, racks, cord, etc., in place
during shipment.

Optional

Accessory

Hand

Removable

Speed Rails

Sink

Ice Sink

3 FWE MOBILE BARS, ICE CARTS, BACK BARS

8 Foot Bar