FONESTAR TPI-817, RI-800, TPRI-807, TMI-816, TMRI-806 Instruction Manual

TMRI-806, TPRI-807

WIRELESS PERSONAL MONITOR SYSTEM

16 PLL UHF 863-865 MHz CHANNELS

INSTRUCTION MANUAL

RI-800

TPI-817

TMI-816

N

E

We take this opportunity to thank you for buying this product.

We recommend you read the instruction manual before switching on the machine and follow the instructions
that are given. Keep the manual for future reference.

SECURITY AND THE ENVIRONMENT

ELECTRICAL SECURITY
Check that the current in the mains connection where the machine is to be installed corresponds to the
power supply of the machine.
To avoid damaging the equipment, electrical shocks, fire or physical injury when you connect or disconnect
the equipment from the power supply, pull the plug firmly out of the mains socket holding the plug, never the
cable.
Always do this with dry hands.
Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or change it.
Clean dust and dirt off the power supply cable regularly.
Do not open the machine; you could get an electric shock.

CAUTION
While installing the machine, make sure it is switched off and unplugged.
Do not open the machine. Touching the internal parts is dangerous and you could receive an electric shock.
The machine must not be splashed or dripped on. Never place recipients with liquid inside on the machine.
Do not place anything inside the machine.

LOCATION
Place the equipment on a horizontal surface with enough space around it to allow ventilation.
Avoid direct sunlight, heat sources and excessive dust.

Do not place the machine near magnetic fields or static electricity.
Do not use surfaces which vibrate or receive impact.
Do not pile machines on top of one another.

VENTILATION
Never block or cover the ventilation slits on the machine.
Do not expose it to direct sunlight or place it near sources of heat.

PERIODS OF INACTIVITY
When the machine is not going to be used for a long period of time, disconnect it from the mains.
If you are using an adapter, take into account that it will continue using electricity even if the machine is
switched off. If it is not going to be used for a long period of time, disconnect it from the mains.

THE ENVIRONMENT
To save energy, switch the machine off when you are not going to use it for a long time. The machine could
contain substances that are harmful to the environment or human health. To minimize the effect of these
substances the machine must be correctly managed and recycled when you decide to dispose of it.
When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.
If it contains or uses batteries, these must be disposed of separately.
The machine (without batteries) must be disposed of correctly. Put it in a container specially intended for the
collection of electronic and electrical appliances, at the dump or hand it over to the dealer when you purchase
similar equipment, so that the dealer can dispose of it correctly (at no added cost).

- 2-

SIGNIFICANCE OF THE SYMBOLS ON THE MACHINE*

The symbol formed by the expression “Class 1 laser product” written in a rectangle
indicates that visible or invisible laser radiation could be produced. Avoid direct exposure

o the laser.

t

The symbol formed by a ray of lightening inside a triangle shows that the machine has
connection terminals or a circuit with areas with a current which could cause an electric
shock, even in normal working conditions.

The symbol formed by an exclamation mark in a triangle shows that the instruction manual
must be referred to for information on how the machine works and its use.

The symbol formed by one square inside another square shows that the machine has
double electrical insulation.

The European Community symbol shows that the machine complies with the current
European Union legislation, as well as its transposition to local legislation.

The symbol of a rubbish bin crossed out and over a horizontal line shows that when the
product is disposed of it must be done properly, placing it in a special selective electronic
and electrical equipment container or through a dealer when purchasing a similar product,
at no additional cost. It also shows that the machine was put on the market after 13th
August 2005 (European Community Directive 2002/96/CE of Electrical and Electronic
recycling, and its Spanish equivalent R.D.208/2005).

N

E

In accordance with what is set out in the aforementioned decree, FONESTAR is registered
in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI
(Registro de establecimientos Industriales), with the entry number 001851.

The symbol RoHS (Restriction of Hazardous Substances) shows that the product has been
designed and manufactured restricting the use of certain dangerous material(Directive
2009/95/CE on the restriction of certain dangerous substances in electrical and electronic
appliances, and its transferal to the Spanish regulations, R.D. 208/2005).

*It is possible that some of these symbols do not appear on the machine.

EXEMPTION OF LIABILITY

The characteristics of the equipment and the content of the manual can change without forewarning.
FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the
information supplied in this instruction manual, and specifically disclaims any implied liability for marketability
or fitness for any other use.

All rights reserved by FONESTAR, S.A.

- 3-

N

E

DESCRIPTION

Wireless personal diversity monitor system for audio signal transmission on the band UHF 863-865 MHz.
The system is composed of a wireless belt-pack in-ear monitor receiver (mod. RI-800) with silicone rubber

arphones and a wirleless hand-held transmitter microphone (mod. TMI-816) or a tieclip microphone (mod.

e
TPI-817) with wireless belt-pack transmitter, depending on the model chosen.

The system has 16 transmission channels on the band UHF 863-865 MHz, with PLL frequency control that
allows an interference-free channel to be easily selected.
Moreover, as many receivers as required can be used with each transmitter (mod. RI-800) on the same
channel.

The wireless personal diversity monitor system receiver has 2 antennas and diversity reception system with
unique channel, that automatically switches between the antennas to obtain the best RF signal and avoid
signal fading.

CONTROLS AND FUNCTIONS

RI-800 Wireless UHF in ear diversity belt-pack monitor receiver with earphones.

1.- ON/OFF: receiver on/off switch.

2.- LED indicator:

- When the receiver is turned on, it will light up red once and then it will switch off.

- While a signal is being received it will remain lit in green.

- If the batteries are low, it will remain lit in red.

- While the batteries are being recharged, it will flash in red.

3.- VOLUME: volume control.

4.- Antenna receiver.

5.- REC: audio output for recording, 3.5 mm stereo jack.

6.- Earphone output, 3.5 mm stereo jack.

7.- Button to open battery holder compartment.

8.- CHARGING INPUT: power supply connector for recharging the rechargeable batteries.
Warning: do not connect the adapter when there are alkaline batteries in the battery compartment, it
could seriously damage the equipment.

9.- Belt clip.

10.- CHANNEL: RF channel selector. Use the metal part which is included to choose the required

transmission channel.

11.- Battery compartment. Use 2 LR6-AA 1.5V batteries, respecting the polarity indicated.

12.- Earphones to listen to the signal received. Connect them to the earphone output.

- 4-