AS-25RUB
STEREO AMPLIFIER
INSTRUCTION MANUAL
We take this opportunity to thank you for buying this product.
W
e recommend you read the instruction manual before switching on the machine and follow the instructions
that are given. Keep the manual for future reference.
SECURITY AND THE ENVIRONMENT
ELECTRICAL SECURITY
C
heck that the current in the mains connection where the machine is to be installed corresponds to the
power supply of the machine.
To avoid damaging the equipment, electrical shocks, fire or physical injury when you connect or disconnect
the equipment from the power supply, pull the plug firmly out of the mains socket holding the plug, never the
cable.
Always do this with dry hands.
Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or change it.
Clean dust and dirt off the power supply cable regularly.
Do not open the machine; you could get an electric shock.
CAUTION
While installing the machine, make sure it is switched off and unplugged.
Do not open the machine. Touching the internal parts is dangerous and you could receive an electric shock.
The machine must not be splashed or dripped on. Never place recipients with liquid inside on the machine.
Do not place anything inside the machine.
LOCATION
Place the equipment on a horizontal surface with enough space around it to allow ventilation.
Avoid direct sunlight, heat sources and excessive dust.
Do not place the machine near magnetic fields or static electricity.
Do not use surfaces which vibrate or receive impact.
Do not pile machines on top of one another.
VENTILATION
Never block or cover the ventilation slits on the machine.
Do not expose it to direct sunlight or place it near sources of heat.
PERIODS OF INACTIVITY
When the machine is not going to be used for a long period of time, disconnect it from the mains.
If you are using an adapter, take into account that it will continue using electricity even if the machine is
switched off. If it is not going to be used for a long period of time, disconnect it from the mains.
THE ENVIRONMENT
To save energy, switch the machine off when you are not going to use it for a long time. The machine could
contain substances that are harmful to the environment or human health. To minimize the effect of these
substances the machine must be correctly managed and recycled when you decide to dispose of it.
When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.
If it contains or uses batteries, these must be disposed of separately.
The machine (without batteries) must be disposed of correctly. Put it in a container specially intended for the
collection of electronic and electrical appliances, at the dump or hand it over to the dealer when you purchase
similar equipment, so that the dealer can dispose of it correctly (at no added cost).
- 2-
E
N
SIGNIFICANCE OF THE SYMBOLS ON THE MACHINE*
The symbol formed by the expression “Class 1 laser product” written in a rectangle
indicates that visible or invisible laser radiation could be produced. Avoid direct exposure
to the laser.
The symbol formed by a ray of lightening inside a triangle shows that the machine has
c
onnection terminals or a circuit with areas with a current which could cause an electric
shock, even in normal working conditions.
The symbol formed by an exclamation mark in a triangle shows that the instruction manual
must be referred to for information on how the machine works and its use.
The symbol formed by one square inside another square shows that the machine has
double electrical insulation.
The European Community symbol shows that the machine complies with the current
European Union legislation, as well as its transposition to local legislation.
The symbol of a rubbish bin crossed out and over a horizontal line shows that when the
product is disposed of it must be done properly, placing it in a special selective electronic
and electrical equipment container or through a dealer when purchasing a similar product,
at no additional cost. It also shows that the machine was put on the market after 13th
August 2005 (European Community Directive 2002/96/CE of Electrical and Electronic
recycling, and its Spanish equivalent R.D.208/2005).
In accordance with what is set out in the aforementioned decree, FONESTAR is registered
in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI
(Registro de establecimientos Industriales), with the entry number 001851.
*It is possible that some of these symbols do not appear on the machine.
EXEMPTION OF LIABILITY
The characteristics of the equipment and the content of the manual can change without forewarning.
FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the
information supplied in this instruction manual, and specifically disclaims any implied liability for marketability
or fitness for any other use.
All rights reserved by FONESTAR, S.A.
- 3-
E
N
DESCRIPTION
The model AS-25RUB is a stereo amplifier 20 + 20 W RMS at 4 Ω with great sound quality and optimum
p
erformance. Specially suitable for domestic use.
Incorporates an MP3 file player which accepts the connection of USB storage devices and SD memory cards.
I
t also has a digital FM radio tuner and incorporates a bluetooth receiver to play music received from a mobile
p
hone. Remote control for the player.
E
quipped with several inputs which facilitate the connection of different audio sources (CD/PHONO, DVD and
AUX in the front panel). Digital audio toslink input and RCA.
Main loudspeaker output and headphone output.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.- POWER: amplifier on/off button.
2.- MODE: allows selection of the audio source among USB storage device, SD memory card, FM radio
tuner or bluetooth receiver.
3.- *: allows selection of playback mode among the following: SINGLE (repeat one track), FOLDER (repeat
folders), RANDOM (random playback), BROWEE (playback of the first 10 seconds of each track), ALL
(repeat all) and NORMAL (normal playback).
4.- 7: in playback mode, a short press of this button allows you to rewind to the previous track. A long
press allows you to fast rewind playback.
In radio mode, allows you to go to the previous stored station.
5.- 8: in playback mode, a short press allows you to forward to the next track. A long press allows you to
fast forward playback.
In radio mode, it allows you to go to the next stored station.
6.- 12: in playback mode, allows playback of an audio file to be started or paused.
In radio mode, a short press of this button allows automatic tuning of the FM radio stations to be
performed.
7.- Information display.
8.- SD memory card connection slot.
9.- USB storage device connection port.
10.- Remote control infrared receiver.
11.- INPUT: allows the input signal to be selected among the following: MP3/BT (USB/SD/MP3 player, FM
radio tuner and bluetooth receiver), CD/PHONO, DVD/DIGITAL or AUX.
- 4-
E
N
12.- AUX: stereo aux input, 3.5 mm jack connector.
1
3.- BALANCE: L-R balance control of the output signal.
14.- BASS: control which reinforces or attenuates bass frequencies.
1
5.- TREBLE: control which reinforces or attenuates treble frequencies.
16.- Stereo headphone output, 6.3 mm jack connector.
1
7.- VOLUME: output signal general volume control.
REAR PANEL
1.- Type of input selector: CD or PHONO.
2.- PHONO: signal input which allows connection of phono level audio sources, 2 x RCA connectors.
3.- CD: signal input which allows connection of line level audio sources, 2 x RCA connectors.
4.- DVD: signal input which allows connection of line level audio sources, 2 x RCA connectors.
5.- OUTPUT: stereo aux output signal, 2 x RCA connectors.
6.- BT: bluetooth aerial.
7.- Selector which allows choice of DIGITAL INPUT or the DVD audio analogue input.
8.- DIGITAL INPUT: digital optical audio and coaxial SPDIF inputs, toslink and RCA connectors.
9.- FM: FM radio digital tuner aerial input.
10.- MAIN SPEAKERS: main stereo loudspeaker output, scew terminals or banana plugs. Connect low
impedance loudspeakers (4-16 Ω). For more information, consult the Connection section.
11.- Power supply voltage selector 115/230 V AC.
12.- Power supply cable.
- 5-
E
N
E
N
- 6-
REMOTE CONTROL
1.-q: player module on/off button.
2.- CH-/+: in radio mode, allows you to go to the previous/next stored
station.
3.- 7/8: in playback mode, a short press of these buttons allows
you to go to the previous/next track. A long press alllows fast
forwarding/rewinding of playback.
4.- VOL+/-: controls which allow the player volume to be
increased/decreased.
5.- REPEAT: allows the playback mode to be selected among the
following: SINGLE (repeat one track), FOLDER (repeat folders),
RANDOM (repeat playback), BROWEE (playback of first 10
seconds of each track), ALL (repeat all) and NORMAL (normal
playback).
6.- MODE: allows selection of the audio source among the USB
storage device, the SD memory card, the FM radio tuner or the
bluetooth receiver.
7.- EQ: allows selection of the different equalizations that exist.
8.- 12: in playback mode, allows playback to be started/paused.
In radio mode, a short press of this button allows automatic tuning of the FM radio stations to be
performed.
9.- 0-9: number selection buttons.
BLUETOOTH RECEIVER
- This AS-25RUB model allows playback of MP3 files contained in your mobile phone if the device is paired
with this amplifier’s bluetooth receiver module.
- In order to pair your mobile phone with the bluetooth receiver, select the Bluetooth option with the MODE
button located on the front panel of the amplifier or the remote control. With the bluetooth option activated
in your mobile phone, select the corresponding device from the list of bluetooth devices. At that moment,
your mobile phone will be paired with the device.
- The playback options (playback, pause, previous/next track, etc) are available through the controls on
the amplifier itself or the remote control.
CONNECTION
- Make the connections with the amplifier and all the components of the installation switched off and
d
isconnected from the power supply.
- Line level sources can be connected in the aux inputs designed for that purpose on the rear panel of the
amplifier (CD/PHONO and DVD) or in the AUX input on the front panel.
- If you wish, the optical audio inputs located on the rear panel of the amplifier can be used.
- A USB storage device or an SD memory card can be connected. Select the required playback mode and
then you will be able to play music from external storage media. The amplifier also has an FM radio tuner
and bluetooth receiver.
- The amplifeir is low impedance, therefore the loudspeakers must be connected so that the load impedance
of the loudspeakers is the same as the impedance of the amplifier output and the power supplied by the
amplifier does not exceed that withstood by the loudspeakers:
20 + 20 W RMS at 4 Ω
- Connect the amplifier mod. AS-25RUB to the power supply.
- Once the connections have been made according to your needs, connect the devices to the power supply
and switch them on. After use, do not forget to switch off and disconnect the device from the power
supply.
E
N
- 7-
TECHNICAL SPECIFICATIONS
WARRANTY
This product has been tested and has passed the corresponding quality control prior to being put on the market.
FONESTAR guarantees the suitability of the product for its specified use during a period of 2 years from the
delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General
para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007 16 Noviembre.
The lack of conformity in the first six months after purchase, due to a manufacturing defect, will be rectified with
no more than showing the proof of purchase. After six months FONESTAR reserves the right to demand proof of
the product being sold with that problem.
This warranty does not include damage produced by: inappropriate use or negligence, accidents, worn out parts
due to use, breakages, burns, spilt liquids or other substances, excessive humidity, battery deterioration and
internal manipulation of the device, the software or its components by unauthorized persons, and in general any
use that is unrelated to the nature and purpose of the product.
If any service is needed during the warranty period because of lack of conformity, please contact the business or
distributor where the product was purchased in no more than 2 months after being conscious of the problem. It
is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it.
To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no
corrections or crossing out.
This document adds information, and never decreases the consumers’ rights, which in all cases are protected by
the Spanish law ‘La Ley General para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007
16 Noviembre’.
FONESTAR is a member of ECOEMBALAJES ESPAÑA, S.A. “ECOEMBES”, with number 03497 and all our products
carry the symbol, backed by our membership and subscription to the above mentioned organization with the recycling
and subsequent management of our packaging.
FONESTAR, S.A. - NIF: A28780443 - Poligono Trascueto - 39600 - Revilla de Camargo, Cantabria (SPAIN)
www.fonestar.com
AS-25RUB
CHARACTERISTICS Stereo Hi-Fi amplifier.
USB/SD/MP3 recorder/player.
Digital FM tuner.
Bluetooth receiver.
LCD display.
Remote control for player.
POWER 20 + 20 W RMS at 4 Ω
INPUTS 2 stereo inputs: CD/Phono and DVD, 2 x RCA
1 stereo aux, 3.5 mm jack in the front panel
1 digital audio TOSLINK and RCA
OUTPUTS Loudspeakers:
Main L/R, 4-16 Ω screw terminals or banana plugs
1 stereo headphones, 6.3 mm jack
1 stereo audio, 2 x RCA
RESPONSE 20-20,000 Hz
POWER SUPPLY 230/115 V AC, 120 W
DIMENSIONS 250 x 88 x 290 mm depth
Loading...