Foma SH906i Troubleshooting Manual

Appendix/External Devices/Troubleshooting
Menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458
Dial key assignments (5-touch) . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
Dial key assignments (2-touch). . . . . . . . . . . . . . . . . . . . . . . . . . . 478
Symbols/Special character list . . . . . . . . . . . . . . . . . . . . . . . . . . . 478
Phrase list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480
Multiaccess combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481
Multi Assistant (Multitask) combinations . . . . . . . . . . . . . . . . . . . . 482
Services available from the FOMA terminal . . . . . . . . . . . . . . . . . 484
Options and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
Using with external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
Troubleshooting
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486
List of error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 488
Warranty and after-sales services . . . . . . . . . . . . . . . . . . . . . . . . . 501
Updating software . . . . . . . . . . . . . . . . . . . . . . <Software update>504
Protecting your FOMA terminal from harmful files
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <Scanning function>509
Main specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512
Number of saved/registered/protected entries in the FOMA terminal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
Specific Absorption Rate (SAR) . . . . . . . . . . . . . . . . . . . . . . . . . . 515
Export Control Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517
457

Menu list

Custom menu/Basic menu list
The menu item numbers correspond to the numbers on the keypad.
Press the corresponding key to select that menu.
The menu item numbers may differ depending on the menu. Also,
depending on the Custom menu, the menu item numbers may not be displayed or, when they are, they may not correspond to the
Appendix/External Devices/Troubleshooting
keypad keys.
In the Basic menu, enter the function number, which is assigned to
each function, to quickly retrieve the function to be used.
Assigned function number
Snd/Vibrator/Manner: 1 Initial setting: 8
Disp/LED/Power saver: 2 Data box: 91
General settings: 3 LifeKit: 92
NW Services: 4 Media tool: 93
Other NW Services: 5 MUSIC: 94
Phone settings: 6 Osaifu-Keitai: 95
Security: 7 1Seg: 96
Depending on the Kisekae Tools set in the Custom menu, the
function names may differ from those described.
The function names in the Custom menu set by default vary
depending on the handset color (written in the following order: the handset color “White” and “Blue”/the handset color “Black” and “Pink”).
When the settings are reset (nP. 411), functions return to default
settings (marked with /).
i-mode menu
i-mode
Function menu Default setting Page
UiMenu P. 170 VBookmark [Bookmark] folder P. 178 WScreen Memo P. 179 XFull Browser
UHome P. 302 VBookmark [Bookmark] folder P. 302 WLast URL P. 302 XGo to location
UURL history P. 302 VInput URL http:// P. 302
YFB Settings
UHome URL http://www.google.co.jp P. 302 VCookie Setting Valid/ P. 306 WDelete cookie P. 306 XScript Setting Valid/ P. 307 YDisplay Mode PC mode/ P. 304 ZSet image display ON/ P. 307 [Window Open Guard Invalid/ P. 307 \Referer Setting Send/ P. 307 ]Auto layout disp ON/ P. 307 TSet auto network Confirm anytime/ P. 307 RSound effect ON/ P. 307 SUse phone info Yes/ P. 308
rUAccess Setting OFF/ P. 308 rVReset full browser P. 308
YLast URL P. 172
458
Function menu Default setting Page
ZGo to location
UURL history P. 177 VInput URL http:// P. 177
[i-Channel
URun i-Channel list P. 192 Vi-Channel ticker ON (Ticker font size:
WReset i-Channel P. 193
\MessageR/F
UMessageR P. 222
VMessageF P. 222 ]Check new message Ri-mode setting
UHost selection i-mode (UIM)/ P. 18 5
VSave login info P. 176
WSet image display ON/ P. 18 6
XFont size Normal/ P. 1 72
YCertificates All enabled/ P. 1 87
Zi-motion auto replay Yes/ P. 1 91
[Secure setting Cert Operation: –
\Use phone info Yes/ P. 1 86
]Sound effect Volume 5/ P. 1 7 2
Ti-mode arrival act PushTalk preferred/ P. 1 87
RReset i-mode P. 187
SFunction lock OFF/ P. 17 1
i-mode
Large(default), Ticker color: Pattern1 (Font color: blue, Background color: white), Ticker speed: Normal)/
DoCoMo CA Host: DoCoMo
/
P. 1 93
P. 207
P. 1 88 P. 1 90
i-appli menu
i-appli
Function menu Default setting Page
USoftware list Sort: By usage/ P. 231 Vi-appli volume Volume 5/ P. 232 WSoftware info OFF/ P. 231 XAuto start OFF/ P. 244 YUsed by i-appli P. 249 ZError display P. 248 [Trace info P. 248 \Battery icon OFF/ P. 232 ]Power saver set OFF/ P. 233 RFunction lock OFF/ P. 248
Appendix/External Devices/Troubleshooting
459
Mail menu
Mail
Function menu Default setting Page
UInbox “Welcome$SH906i%&
Appendix/External Devices/Troubleshooting
VOutbox Folder list
WUnsent messages
XCompose message P. 196 YCompose Decome-Anime P. 200 ZCompose SMS P. 226 [Te mp l at e
UDecome-Template P. 201
VDecome-Anime Template P. 200 \Check new message P. 207 ]Check new SMS P. 227 RReceive option
UReceive option P. 206
VReceive opt. setting OFF/ P. 2 1 9 TWEB Mail P. 196
Folder list
Manage folders (Folder security: OFF)
Mail list
Display settings (Preview: ON/, List display: Two lines, Sort: Date(newbold))
Manage folders (Folder security: OFF)
Mail list
Display settings (Preview: ON/, List display: Two lines, Sort: Date(newbold))
P. 210
to
P. 2 15
P. 210
to
P. 2 15
Mail
Function menu Default setting Page
SMail setting
UQuick reply mail P. 220 VRcv attached file All attachments/ P. 220 WMelody Auto replay Auto replay/ P. 220 XFont size Display, Text input:
YRcv/Auto send disp Notice first/ P. 220 ZCheck new message Mail, MessageR,
[Auto message display Msg R preferred/ P. 222 \Receive opt. setting OFF/ P. 219 ]Mail member Member 1 to Member 10 P. 219 TSave signature ON/ P. 219 RMail ticker setting Only notice/ P. 206 SSMS setting
USMS center DoCoMo P. 227 VReport request Do not request/ P. 228 WSMS expiry 3 days P. 228 XSMS input character Japanese(70Chara) P. 228
rUArea Mail setting
UReceive setting OFF/ P. 225 VReceive entry P. 226 WBeep time 10 seconds/ P. 226
rVCheck mail settings P. 220 rWReset mail settings P. 221 rXFunction lock OFF/ P. 221
Normal/
MessageF: ON/
P. 217
P. 219
460
Settings menu
Those default settings that depend on the handset color and which
can be set with the Kisekae Tools (nP. 119) are indicated by [White], [Black], [Pink], or [Blue]. The title name of a Kisekae Tool appears when the Kisekae Tool settings are changed.
Settings
Function menu Default setting Page
USnd/Vibrator/Manner
USelect volume
Uphone ring vol Phone ring tone, V.phone
VMail ring vol
WPushTalk tone vol Volume 5/ P. 1 0 9 XKey/Standby i-motion Volume 5/ P. 11 0 YCharge start sound Volume 5/ P. 11 0 ZCharge end sound Volume 5/ P. 11 0 [Timer sound Volume 5/ P. 11 0 \GPS volume Pos location sound, Pos
ring tone, Payphone ring tone, User unset, Unknown tone: Volume 5/
Mail ring tone, MessageR ring tone, MessageF ring tone, SMS ring tone: Volume 5
location notice, Loc provision/accept, Loc provision/notify: Volume 5/
/
P. 1 09
P. 1 09
P. 1 09
Settings
Function menu Default setting Page
USnd/Vibrator/Manner
VSelect sound
USelect ring tone
VSelect mail tone
WPushTalk tone XShutter sound Default tone/ P. 109 YTimer sound
ZGPS tone Pos location sound: OFF/
WVibrator
UVibration mode OFF/ P. 111 VMail vibration OFF/ P. 111 WGPS vibrator Position location, Location
XTouch panel vib ON/ P. 111
Phone ring tone: 着信音1/ V.phone ring tone,
Payphone ring tone, User unset, Unknown tone: Phone ring tone/
Mail ring tone: 着信音2/ MessageR ring tone, MessageF ring tone, SMS ring tone: Mail ring tone/
着信音1/
TI (標準音)/Ring time setting: 15 seconds/
Pos location notice: 着信音 4/
Loc provision/accept: 着信 5/ Loc provision/notify: 着信音 6/
notification, Loc provision/ accept, Loc provision/notify: OFF/
P. 108
P. 108
P. 108
P. 109
P. 109
P. 111
Appendix/External Devices/Troubleshooting
Continued on next page
461
USnd/Vibrator/Manner
XManner mode
Appendix/External Devices/Troubleshooting
YHeadset setting Headset + speaker/ P. 11 2
ZRing time setting
[Set mute ring time OFF/ P. 1 40
\Hold/On hold tone
]Snd playbck (melody)
Settings
Function menu Default setting Page
UNormal P. 113 VSilent P. 113 WOriginal Record message, Vibrator,
UMail ring time set ON/3 seconds/ P. 11 2 VPT ring time set 30 seconds/ P. 11 2 WGPS ring time set Pos location sound, Pos
USet on hold tone On hold tone 1/ P. 7 4 VSet hold tone Hold melody 1/ P. 7 4
UStereo effects Stereo/3D sound/ P. 11 0 VEqualizer Normal/ P. 11 1
Mic sensitivity up: ON/ Alarm tone, Key/Standby i-motion, Low battery alarm: OFF/ Ring tone, Mail ring tone: Silent/
location notice, Loc provision/accept, Loc provision/notify: ON/5 seconds/
P. 11 4
P. 11 2
Settings
Function menu Default setting Page
VDisp/LED/Power saver
USet screen
UStand-by display
VClock display
WCalendar display OFF/ P. 11 5 XStand-by memo disp OFF/ P. 1 1 5 YDesktop clock 2 hours/ P. 1 16
VFont style
UFont style setting LC Gothic/ P. 124 VFont size
UCollective setting Standard/ P. 124 VIndividual setting i-mode, Full Browser, Mail/
WThemes
UKisekae Tool P. 119
*1 When Delete all data or Reset settings is performed, the setting
will be for the White handset.
待受画面1 (Handset color: White), 待受画面2 (Handset color: Black), 待受画面3 (Handset color: Pink), 待受 画面4 (Handset color:
*1
Blue) Clock display: ON(Large)/
Set clock style: (Handset color: White),
2 (Handset color:
時計
Black), color: Pink), (Handset color: Blue) Set disp position: Down/
Message, Input: Normal/
待受時計
待受時計
待受時計
待受
3 (Handset
4
*1
1
P. 11 4
P. 11 5
P. 124
462
Settings
Function menu Default setting Page
VDisp/LED/Power saver
WThemes
VCall/Rcv display
Picture call set: ON/ Outgoing voice calls, V-phone sending scrn: (Handset color: White),
2 (Handset color: Black),
信 発信 話発信
Incoming voice calls, Incoming video phone: (Handset color: White),
2 (Handset color: Black),
信 着信 話着信
Payphone, User unset,
電話発信
3 (Handset color: Pink),
4 (Handset color: Blue)
電話着信
3 (Handset color: Pink),
4 (Handset color: Blue)
Unavailable: 電話着信1/
WSend/Rcv display
Send display: (Handset color: White),
ル送信
Black), (Handset color: Pink),
送信
Receive display: 1 (Handset color: White),
メール受信
Black), (Handset color: Pink),
受信 Mail rcvd screen: メール受 信結果1 (Handset color:
White), メール受信結果2 (Handset color: Black), メー ル受信結果3 (Handset color: Pink), メール受信結
4 (Handset color: Blue)
メール送信
2 (Handset color:
メール送信
4 (Handset color: Blue)
メール受信
2 (Handset color:
メール受信
4 (Handset color: Blue)
3
3
1
電話発
1
電話着
メール
メール
電話
電話
1
メー
Settings
Function menu Default setting Page
VDisp/LED/Power saver
WThemes
XSubmenu image
*1
P. 11 6
*1
YDial image set Dial image 1/ P. 121 ZAnimate notices
[Signal/batt/s clock
*1
P. 11 6
*1
メニュー枠1(上
color: White),
) (Handset color: Black),
(
ニュー枠
color: Pink),
) (Handset color: Blue)
(
お知らせアニメ1 (Handset color: White), お知らせアニ
2 (Handset color: Black), お知らせアニメ3 (Handset color: Pink), お知らせアニ メ4 (Handset color: Blue)
Signal icon: (Handset color: White),
マーク
Black), color: Pink), (Handset color: Blue) Battery icon: (Handset color: White), 2 (Handset color: Black),
3 (Handset color: Pink),
4 (Handset color: Blue)
残量
Small clock: 時計表示1 (Handset color: White), 計表示2 (Handset color: Black), 時計表示3 (Handset color: Pink), 時計表示4 (Handset color: Blue)
)/(下) (Handset
メニュー枠2(上
3(上)/(下) (Handset
メニュー枠4(上
電波マーク
2 (Handset color:
電波マーク
3 (Handset
電波マーク
電池残量
*1
1
電池残量
*1
1
電波
4
電池残
電池
*1
*1
)/
P. 121
)/
Appendix/External Devices/Troubleshooting
P. 121
*1
P. 121
*1 When Delete all data or Reset settings is performed, the setting
*1
will be for the White handset.
Continued on next page
463
VDisp/LED/Power saver
WThemes
\Color theme setting
Appendix/External Devices/Troubleshooting
XLED settings
UCalled LED
VMail LED
WNotice LED Missed call notice, New
XIn-call LED OFF/ P. 1 23 YAlarm/Timer LED
ZIC card LED ON/ P. 1 2 3 [Open/close LED
\GPS LED
Settings
Function menu Default setting Page
MilkWhite (Handset color: White), OrbBlack (Handset color: Black), RipplePink (Handset color: Pink), LavenderBlue (Handset color: Blue)
UPhone LED color settings: Leaf/
VVideo-phone LED color settings: Leaf/
WPushTalk
UMail/Message
LED
VMail send/rcv
LED
LED pattern settings: Stream
LED pattern settings: Stream
LED color settings: Sun set LED pattern settings: Stream
LED color settings: Sunshine LED pattern settings: Splash
ON (LED color settings: Sky LED pattern settings: Splash)
unrd mail noti: ON/
ON (LED color settings: Rainbow LED pattern settings: Ripple)
ON (LED color settings: Aurora LED pattern settings: Stream)
Position location, Location notification, Loc provision/accept, Loc provision/notify: Sky
*1
P. 1 21
P. 1 23
/
P. 1 23
/ /
P. 1 23
/
/
P. 1 23
/
P. 1 23
/
P. 1 23
P. 1 23
/
P. 1 23
/
P. 1 23
/
Settings
Function menu Default setting Page
VDisp/LED/Power saver
YDisplay img quality
UVibrant image mode
VControl by scene ON/ P. 124
ZLight/Power saver
UNorm (auto bright) P. 117 VNorm (fixed bright) P. 117
Eco mode (Pwr saver)
W XOriginal Eco mode
UDisplay light time Normal: 10 seconds/
VScreen dsp time 1 minute/ P. 11 8 WBrightness Automatic/ P. 1 1 8 XKeypad light
setting
*1 When Delete all data or Reset settings is performed, the setting
will be for the Blue handset.
*2 Default setting is [Norm (auto bright)].
Stand-by, Data Box(Music&V ch), Data Box(i-motion), Internet movie plyr: Dynamic Camera, Data Box(My picture): Normal/ 1Seg/Data Box(1Seg): Link genres/ i-appli: Game/
*2
Charging, Internet: Same as normal/ Video-phone: Always ON/ i-appli: Software/
/
P. 124
–P.117
P. 11 7
Light/ P. 1 1 9
464
Settings
Function menu Default setting Page
VDisp/LED/Power saver
[VeilVie w
UDis temp in stdby ON/ P. 1 2 6 VPattern Docomodake/ P. 1 2 6
\Menu priority Custom menu/ P. 4 4 WGeneral settings
UCheck status
UOwner Information Image transfer: Yes P. 395 VCheck memory P. 348 WBattery level P. 54 XCheck settings P. 382
VText input setting
UUser dictionary P. 422 VDwnld dictionary No dictionaries registered P. 422 WEdit phrase P. 420 XClear memory terms P. 422
WAuto power ON/OFF
UAuto power ON OFF/ P. 38 3 VAuto power OFF OFF/ P. 3 84
WLink alarm/power ON OFF/ P. 38 4 XDate settings Auto time correction: ON/ P. 57 YSelect language ZTOUCH CRUISER set
UUsage settings ON/ P. 40
VPointer speed Normal/ P. 4 0
WScroll speed Normal/ P. 4 0
日本語
P. 5 6
Settings
Function menu Default setting Page
WGeneral settings
[USB mode setting Communication mode/ P. 342 \Scanning function
UUpdate P. 510 VSet auto-update P. 510 WSet scan Scan, Scan message:
XVersion P. 512
]Software update Set auto-update:
TReset settings P. 411
XNW Services
UVoice Mail
UCheck messages P. 427 VPlay Messages P. 427 WActivate VoiceMail P. 427 XSet ring time P. 427 YDeactivate VoiceMail P. 427 ZCheck setting P. 427 [Voice Mail setting P. 427 \Notification setting Voice Mail alarm: ON/ P. 427 ]Notification P. 427
Enable/
auto-update (Day: Default, Time: 03:00)
P. 509
Appendix/External Devices/Troubleshooting
P. 504
Continued on next page
465
Appendix/External Devices/Troubleshooting
Settings
Function menu Default setting Page
XNW Services
VCall waiting
UActivate P. 428
VDeactivate P. 428
WCheck setting P. 428 WCall forwarding
UActivate P. 430
VDeactivate P. 430
WRegister number P. 430
XForwarding No. busy P. 430
YCheck setting P. 430 XBar nuisance calls
URegister caller P. 431
VRegister selected No P. 431
WDelete all entries P. 431
XDelete last entry P. 431
YCheck No of entries P. 431 YNotify caller ID
UCheck setting P. 58
VNotify caller ID P. 58 ZCaller ID request
UActivate P. 431
VDeactivate P. 431
WCheck setting P. 431
Settings
Function menu Default setting Page
XNW Services
[Talk time/cost Limit settings: Disable/
\2in1 setting
UMode switching Dual mode P. 436 VPhonebook 2in1 set P. 436 WStand-by display
UDual mode VB mode
XSet call/receive No.
Disp. Call/Rcv No.
U VNumber B Ring
tone
Y2in1 function OFF P. 437 ZReceive avoidance
UChange rcv. avoid
VCheck rcv. avoid P. 437 WMode link setting OFF/ P. 437 XRcv. avoid.
(abroad)
(Notice method: Alarm + stand-by, Auto reset: OFF when set to Enable)
待受画面6 待受画面7
ID display ON P. 436
Phone ring tone: 着信音3 V.phone ring tone: Phone
ring tone Mail ring tone: 着信音4
SMS ring tone: Mail ring tone
Receive (Number A), Receive (Number B): Unchange
P. 437
P. 397
P. 436
P. 436
P. 437
P. 437
/
466
Settings
Function menu Default setting Page
XNW Services
]In-call arrival act
USet arrival act
UActivate P. 434 VDeactivate P. 434 WCheck setting P. 434
VArrival Call Act Answer/ P. 4 3 3
YOther NW Services
URemote control
UActivate P. 434
VDeactivate P. 434
WCheck setting P. 434 VDual network
USwitching P. 432
VStatus request P. 432 WEnglish guidance
UGuidance setting P. 433
VCheck setting P. 433 XService number
Uドコモ故障問合せ
Vドコモ総合案内・受付 YAdditional service
UUSSD P. 440
VReply message P. 440
–P.433
–P.433
Settings
Function menu Default setting Page
YOther NW Services
ZMulti number
USet multi number P. 435 VCheck setting P. 435 WNumber setting P. 435
[Chaku-moji
UCreate message P. 65 VMessage display With caller ID/ P. 6 6
\Roaming guidance
UActivate P. 455 VDeactivate P. 455 WStatus request P. 455
ZPhone settings
UIn-call settings
UNoise reduction ON/ P. 7 0 VReconnect signal No alarm/ P. 7 0
WQuality alarm No alarm/ P. 11 2 VHeadset sw to call OFF/ P. 400 WIncoming settings
UAny key answer ON/ P. 7 2
VAuto answer setting Phone/Videophone,
WMelody Call setting P. 111
PushTalk: OFF/
Appendix/External Devices/Troubleshooting
P. 401
Continued on next page
467
Settings
Function menu Default setting Page
ZPhone settings
XVideophone set
URedial voice call OFF/ P. 8 3 VSet sending image
Appendix/External Devices/Troubleshooting
WDisplay setting Show me small/ P. 8 3 XSubscreen position Upper left/ P. 8 3 YVisual preference Normal/ P. 8 2 ZNotify switch mode P. 84 [Hands-free V.phone ON/ P. 8 2 \V-phone while packet V-phone priority/ P. 8 4
YRecord message
URecord message OFF/ P. 7 7 VAnswering duration 13 seconds/ P. 7 8 WReply message Reply message 1/ P. 7 8 XV.phone reply image
ZSet PushTalk
USet PT arrival act Answer/ P. 9 4 VHands-free PT ON/ P. 9 4
[Set when folded
UPhone/Videophone Finish call/ P. 7 3 VPushTalk Speaker phone/ P. 7 3
*3 [テレビ電話代替] is set when Reset settings (nP. 411) is
performed after [キャラ(女性)] is deleted from Chara-den.
Substitute image: キャラ
*3
/
(女性) On hold image, Hold image:
テレビ電話代替/
テレビ電話代替/
P. 8 2
P. 7 8
Settings
Function menu Default setting Page
ZPhone settings
\Self mode ]Other settings
UInt’l prefix
VSub address
WInt’l dial assist
UAuto conversion Int’l prefix conv: ON/
VIDD prefix setting WORLD CALL
WSet country code
XInternational Roam.
UNetwork search
mode
VOperator name
disp
WVoice Mail(Int.) XCall Forward (Int.) YRemote
access(Int.)
ZCaller ID req (Int.)
Country code conv: ON (Country (code): Japan(+81))/
009130-010/
OFF/ P. 134
First entry: 009130-010/ P. 6 9
ON/ P. 7 0
22 country codes saved P. 69
Auto P. 454
Display on/ P. 455
P. 456
P. 456
P. 456
P. 456
P. 6 8
P. 6 9
468
Settings
Function menu Default setting Page
ZPhone settings
]Other settings
XInternational Roam.
[Roam.
guidance(Int.)
\Call barring P. 455 ]3G/GSM setting AUTO P. 453
YIn-area status P. 454
[Security
USecret mode OFF/ P. 13 8 VUIM Settings
UPIN1 code input set OFF P. 131 VChange PIN1 code 0000 P. 131 WChange PIN2 code 0000 P. 131
WAccept/Reject calls
UAccept calls OFF/ P. 1 3 8 VReject calls OFF/ P. 1 3 8 WReject unknown Accept/ P. 1 4 0 XUser unset Accept/ P. 1 3 9 YReject payphone Accept/ P. 1 3 9 ZReject not support Accept/ P. 1 3 9
XShow call/received
UShow rcvd calls ON/ P. 1 37 VShow redial ON/ P. 1 3 7
YShow sent/received
UShow sent messages ON/ P. 1 3 7 VShow rcvd messages ON/ P. 1 3 7
–P.456
Settings
Function menu Default setting Page
[Security
ZLock settings
UAll lock Disabled P. 132
VKeypad dial lock OFF/ P. 136
WFunction lock OFF/ P. 134
XIC card lock IC lock(power-on): OFF/
YMulti easy lock set All lock/ P. 136
ZMulti lock auto-set OFF/ P. 137 [Change security code 0000 P. 129 \Writing authentic OFF/ P. 130 ]Delete all data
UDelete user data P. 412
VDel secret data P. 414
\Initial setting P. 56
IC lock(power-off): Follow power ON/
P. 263
LifeKit menu
LifeKit
Function menu Default setting Page
UBar code reader Switch AF mode: Closeup P. 164 VReceive Ir data
UReceive P. 351 VReceive all P. 352
WmicroSD manager
UView microSD data P. 342 VBackup/restore P. 340 WImport P. 344 XNew manager info P. 343
Continued on next page
Appendix/External Devices/Troubleshooting
469
LifeKit
Function menu Default setting Page
WmicroSD manager
YFormat P. 342 ZUSB mode setting Communication mode/ P. 3 4 2
XBluetooth
UAccept Registered P. 406 VReceive Bluetooth P. 409
Appendix/External Devices/Troubleshooting
WList/cnnct/discnnct P. 405 XRegister new device P. 404 YBluetooth Power OFF P. 407 ZBluetooth setting
UBluetooth Info P. 410 VTime-out To Search 5 seconds/ P. 4 1 0 WMusic auto start ON/ P. 4 08 XSet Authentications No/ P. 41 1 YSet Encryptions No/ P. 4 11 ZForward Ring Tone ON/ P. 4 1 1
[Session no. setting OFF/ P. 4 1 1 YCard reader AF mode: Closeup P. 167 ZText memo P. 399 [Schedule Show (Switch view mode:
Normal display) Set (Set vacation: Saturday and Sunday) New (Alarm time: 0 minutes, Ring duration: 15 seconds, Alarm tone: 着信 1, Alarm volume: Volume
5 when Alarm set to ON)
P. 3 87
LifeKit
Function menu Default setting Page
\Timer/A lar m
UTimer 3 minutes P. 384 VAlarm Set repeat: Once only
WWakeup TV Start ann: ON (Alarm time:
]Character reader Select subject: Auto
RCalculator Tax rate: 5% P. 398 TData Sec. Service Send phonebook img:
SGPS menu
UPosition location P. 266 Vi-appli P. 267 WLocation history P. 278 XSet position loc. GPS button setting: Read a
YLoc.notification/set Positioning mode: Standard
Alarm tone: 着信音1 Alarm volume: Volume5
Snooze setting: OFF Ring duration: 15seconds
1minutes, Alarm tone: Silent, Alarm volume: Volume5, Linked startup: ON (Do not notify))
Switch AF mode: Closeup Inverse mode: Automatic
OFF/
Map/ Positioning mode: Standard mode/
mode/
P. 385
P. 294
P. 165
P. 105 P. 141
P. 267
P. 277
470
LifeKit
Function menu Default setting Page
SGPS menu
ZLoc. request menu Loc. prov. ON/OFF: Loc.
provision:OFF/ Positioning mode: Standard mode/ Host setting: Default/
P. 2 73
Osaifu-Keitai menu
Osaifu-Keitai
Function menu Default setting Page
UIC card content P. 255 VDCMX P. 242 WTor u C a To r u C a l i s t
XIC card lock
UIC lock(power-on) OFF/ P. 2 63
VIC lock(power-off) Follow power ON/ P. 2 63 YCheck IC owner P. 256 ZChange IC owner P. 256 [Search by i-mode P. 170 \Setting
UToruCa from IC ON/ P. 2 62
VBC ToruCa setting ON/ P. 2 6 2
WToruCa duple check ON/ P. 2 6 2
XToruCa auto read ON/ P. 2 6 2
YToruCa auto disp ON/ P. 2 62
ZToruCa sound fx Volume 5/ P. 2 6 2
Sort: Date(newbold)/
Tor u C a d i sp l a y
Display/set (Sound effect: Volu me 5) /
P. 2 58
1Seg menu
1Seg
Function
menu
UActivate
1Seg
VProgram
guide
WBooking list Timer setting screen
Display settings (Display mode (L): Video+data, Display mode (W): Vid (full-screen), Mark display (W): Full-time display, App area (L): Full-time display) Caption Settings (Caption: OFF, Caption(hori wide): Down, Startup settings: Linked manner) Image quality (Vibrant image mode: Link genres, Brightness: Automatic) Dolby Sound Set.: Link genres Bluetooth output (Startup auto cnnct: OFF) Recording end time (only for recording): Unrestricted Data broadcasting (Set image display: ON, Sound FX: ON, BC ToruCa setting: ON) Disp program guide: G (G-GUIDE program schedule remote control) 1Seg settings (Main/Sub language: Main, Change language: Main language, Set when folded: Continue, Video recding dest: Auto(microSD first), Switch auto area: ON)
Gガイド番組表リモコン (G-GUIDE program schedule remote control)/
Start ann (Reception): ON (Alarm time: 1minutes, Alarm tone: 着信音1, Alarm
volume: Volume5, Linked startup: ON (Notify)) Start ann (Recording): ON fixed (Alarm tone: 着信音1, Alarm volume: Volume5)
Booking list
Sort: Air date(oldbnew)
Default setting Page
P. 285
ガイド番組表リモコン
P. 291
P. 293
Continued on next page
Appendix/External Devices/Troubleshooting
471
1Seg
Function
menu
XReserve rec
hist
YTVlink P. 298 ZChannel
setting
[1Seg settings
Appendix/External Devices/Troubleshooting
UVideo
recding dest
VErase
storage area
WSet
image display
XSound
FX
YBC
To ru C a setting
Z1Seg
status
[Reset
status disp
\Reset
1Seg
Default setting Page
–P.296
–P.284
Auto(microSD first)/ P. 29 8
–P.299
ON/ P. 2 99
ON/ P. 2 99
ON/ P. 2 99
–P.299
–P.299
–P.300
472
Camera menu
Camera
Function
menu
UShoot still
pic
VShoot movie
WCharacter
reader
XBar code
reader
YCard reader AF mode: Closeup P. 167
Cameraloupe
Z
[Shotdeco Resize: Picture(L)(240×92)/ P. 168
Full-screen mode: OFF Shooting menu (Picture light: OFF, AF mode: Def (people first), Image quality: NORMAL, Brightness: 0, Continuous mode: OFF, Shoot by scene: Auto, Effect shot: OFF, Shoot with frame: OFF, White balance: Auto, Auto timer: OFF) Select size: “std-by: 480×854”/ Camera settings (Fix camera shake: Auto, Auto save mode: OFF, Save camera set: ON) Switch phone#SD: phone/
Shooting menu (Picture light: OFF, AF mode: Standard, Image quality: SUPER FINE, Common replay mode: OFF, Brightness: 0, File size limit: For mail (long), Switch img/voice: Image + voice, Effect shot: OFF, Shoot by scene: Auto, White balance: Auto, Auto timer: OFF) Select size: “QVGA: 320×240”/ Camera settings (Fix camera shake: ON, Noise reduction: ON, Display light time: As light setting, Save camera set: ON)/ Switch phone#SD: phone/
Select subject: Auto Switch AF mode: Closeup Inverse mode: Automatic
Magnification ratio: Approx. 3.0× Shooting menu (AF mode: Closeup) Select size: “std-by: 480×854” Full-screen mode: ON
Default setting Page
P. 153
/
/
/
Switch AF mode: Closeup P. 164
P. 155
P. 165
P. 168
Phonebook menu
Phonebook
Function
menu
Phonebook Search by: Reading?
Switch view mode: Show business card Group settings: No groups, グループ1 (Group 1) to グループ19 (Group 19)
(FOMA terminal handset phonebook), No groups, グループ1 (Group 1) to グループ 10 (Group 10) (FOMA card phonebook)
Image transfer: Yes
Default setting Page
Data box menu
Data box
Function
menu
UMy picture Folder list
Slideshow (Play interval: Normal, Effects settings: Random)/ Backlight time: As light setting/ Manage folders (Folder security: OFF)
Image list
Edit data (File restriction: Not restricted) Slideshow (Play interval: Normal, Effects settings: Random)/ Picture setting (Switch view mode: 5-part/ details, Sort: Date (newb old), Backlight time: As light setting, Set volume: Volume
5)/
<Image viewer (excluding Flash movies)>
Edit data (File restriction: Not restricted) Picture setting (Backlight time: As light setting, Set volume: Volume 5)/
<Image viewer (Flash movies)>
Backlight time: As light setting/
Default setting Page
P. 1 01
P. 3 18
Data box
Function
menu
VMUSIC Music data list in Chaku-uta full
Music&Video ch
W
Display settings (Switch view mode: 12-part, Sort: Date (newb old))/
<MUSIC Player>
Playback settings (Set playback mode: Normal playback, Manner playback: OFF)/ Dolby Sound Set.: Normal/ Bluetooth output (Startup auto cnnct: OFF)/
Program list
Switch view mode: 12-part Sort: Date (newb old)
<Music&Video Channel player (program with voice only)>
Playback settings (Repeat: OFF, Manner playback: OFF)/ Dolby Sound Set.: Normal/
<Music&Video Channel player (program with video and voice)>
Playback settings (Repeat: OFF, Manner playback: OFF, Backlight time: As light setting)/ Dolby Sound Set.: Normal/
Default setting Page
®
P. 375
Appendix/External Devices/Troubleshooting
P. 369
Continued on next page
473
Function
menu
Xi-motion Folder list
Appendix/External Devices/Troubleshooting
Data box
Default setting Page
Manage folders (Folder security: OFF) Continuous play (Repeat playback: No, Sample playback: No)/ i-motion setting (Backlight time: As light setting, Set volume: Volume 5)/
Movie list
Edit data (File restriction: Not restricted) Continuous play (Repeat playback: No, Sample playback: No)/ i-motion setting (Switch view mode: 12-part, Sort: Date (newb old), Backlight time: As light setting, Set volume: Volume 5, Resume settings: ON)/
<i-motion player>
Edit data (File restriction: Not restricted) Dolby Sound Set.: Normal/ i-motion setting (Change size: Zoom, Backlight time: As light setting, Resume settings: ON, Frame rate: Rough (hi-speed), Launch screen mode: Normal Play)/
P. 3 24
Function
menu
Y1Seg Video list
ZMelody Folder list
1Seg data settings (Switch view mode: 12-part, Sort: Date (newbold))/
<Video player>
Display settings (Display mode (L): Video+data, Display mode (W): Vid (full-screen)/, Mark display (W): Full-time display/, App area (L): Full-time display/) Caption Settings (Caption: OFF, Caption(hori wide): Down/, Startup settings: Linked manner/) Image quality (Vibrant image mode: Link genres, Brightness: Automatic)/ Dolby Sound Set.: Link genres/ Bluetooth output (Startup auto cnnct: OFF) Data broadcasting (Set image display: ON, Sound FX: ON)/ 1Seg settings (Main/Sub language: Main, Change language: Main language)
Manage folders (Folder security: OFF) Set volume: Volume 5/
Melody list
Melody settings (Start position: Play all, Sort: Date (newb old)/, Set volume: Volu me 5/)
<Melody player>
Melody settings (Equalizer: Normal, Stereo effects: Stereo/3D sound)/
Data box
Default setting Page
P. 329
/
P. 331
474
Data box
Function
menu
[My
Documents
Kisekae Tool
\
Machi-chara
]
R
Chara-den
*4 [OFF] is set when Reset settings (nP. 411) is performed after [
ロイルカ] is deleted from Machi-chara.
Folder list
Manage folders (Folder security: OFF)
My Documents list
My documents set (Sort: Date (newb old))/
Folder list
Manage folders (Folder security: OFF)
Kisekae Tool list
Kisekae Tool (Switch view mode: 12-part, Sort: Date (newb old))/
Data in Kisekae Tool
Set volume: Volume 5/
Folder list
Manage folders (Folder security: OFF)
Machi-chara list
Machi-chara setting: ON (シロイルカ) Machi-chara display (Switch view mode: 12-part, Sort: Date (newb old))/
Folder list
Manage folders (Folder security: OFF) Backlight time: As light setting/
Chara-den list
Chara-den disp set (Sort: Date (newb old), Backlight time: As light setting)/
<Chara-den player>
Backlight time: As light setting/ Screen size: Zoomd/
Default setting Page
P. 3 56
P. 11 9
P. 1 20
*4
/
P. 3 30
Media tool menu
Media tool
Function
menu
U
Manga&Book Reader
VDocument
Viewer
WPDF Viewer Set screen (Page layout: Single page, View
XVoi ce
recorder
Voice memo/
Y
Rec msg
Z
Quick search
File list
Sort (e-comic only): Date (newbold)/ Backlight time: As light setting/
Details screen
Display settings (Font size: Normal, Text direction: Vertical, Ruby text: OFF, Image Size: Double Size)/ Comics setting: Flame/Page Set volume: Medium/ Vibrator: ON/ Backlight time: As light setting/
Sort: By title name/ Backlight time: As light setting/
types: Fit page, Scroll bar: ON numbers: ON
Noise reduction: ON/ Auto timer: OFF Retain settings: ON/
Default setting Page
/
/
, Magnification: ON/)
P. 396
P. 394
, Page
MUSIC menu
MUSIC
Function
menu
UMUSIC
Player
V
Music&Video ch
Refer to Music&Video ch of Data box P. 364
Default setting Page
Refer to MUSIC of Data box P. 375
P. 359
P. 358
P. 356
P. 355
Appendix/External Devices/Troubleshooting
475
Touch menu list
Function
menu
Full Browser
Home View an Internet web page that is set as a
Bookmark Bookmark folder list screen P. 302
1Seg 1Seg watching screen P. 286
Camera
Appendix/External Devices/Troubleshooting
Shoot still
pic
Shoot
movie
Mail
Inbox Inbox P. 209
Outbox Outbox P. 209
Unsent
messages
Compose
message
Manga&Book Reader
Data box
My picture Folder list screen P. 312
i-motion Folder list screen P. 313
1Seg Folder list screen P. 313
Home
Displayed screen Page
Still picture shooting screen P. 153
Movie shooting screen P. 155
Unsent messages P. 209
Compose message screen P. 196
Folder list screen P. 315
P. 3 02
Other functions
Function
menu
Earpiece volume
Videophone
PushTalk
Manner mode OFF (Normal when set to ON) P. 113
Omakase Lock Disabled P. 133
Side key guard Disabled
Shortcut menu
Character Entry
Chara entry/dict
Change send img: キャラ(女性) Brightness (when sending a camera image):
±0 Videophone (Display setting: Show me small Visual preference: Normal, Lighting: Always
/
ON DTMF mode: OFF
Edit group name: グループ1 to グループ9 Set PushTalk (Set auto answer: OFF, Set PT
arrival act: Answer, Ring time setting: 30 seconds, Set when folded: Speaker phone, Hands-free PT: ON)
Bar code reader, Receive Ir data, Card reader, Timer, Calculator, Manga&BookReader, 地図アプリ,
Schedule, Alarm, Bookmark
Input method: 5-touch, Direct conversion: ON Guess conversion (Quick conversion: ON, Guess conversion: ON, 1 chara mem conv: ON, With emoticon conv: ON, 1st choice genre: Celebrity)
Default setting Page
Volum e 5
/
, Subscreen disp: Upper left/,
)
/
/
P. 7 3
P. 11 0
P. 8 0 P. 8 3
P. 9 4
P. 137
P. 393
P. 416
476

Dial key assignments (5-touch)

Use dial keys to input text. Each key has multiple characters assigned to it.
Double-byte characters Single-byte characters
Double-byte
Key
1
2
3
4
5
6
7
8
9
0
0
to 9
(for 1+ seconds)
Kanji
(hiragana)
input mode
あいうえお ぁぃぅぇぉ
かきくけこ カキクケコ
さしすせそ サシスセソ
たちつてとっ タチツテトッ
なにぬねの ナニヌネノ
はひふへほ ハヒフヘホ
まみむめも マミムメモ
やゆよ
らりるれろ ラリルレロ
わをんゎ
(Space)
*
#
Double-byte
katakana
input mode
アイウエオ ァィゥェォ
やゆよ ヤユヨヤユヨ
ワヲンヮ
*2 *2
alphanumeric input mode
Upper and lower case
./_@1
(Space)
ABC
abc2
DEF
def3
GHI
ghi4
JKL
jkl5
MNO
mno6 PQRS
pqrs7
TUV
tuv8 WXYZ
wxyz9
(Space) (Space) 0
(Space)
*1
-~、。!?・
Lower case
./_@1
(Space)
abc2
def3
ghi4
jkl5
mno6
pqrs7
tuv8
wxyz9
Kuten
code
mode
1
2
3
4
5
6
7
8
9
0 to 9
n/a
Single-byte
Key
1 2 3 4 5 6 7 8 9 0
0
(for 1+ seconds)
* #
to 9
katakana
mode
アイウエオ
アイウエオ
Upper and
lower case
. /_@1 (Space) . /_@1 (Space) 1
カキクケコ サシスセソ
タチツテトッ
ナニヌネノ ハヒフヘホ マミムメモ
ヤユヨ
ヤユヨ
ラリルレロ
(Space) 0 (Space) 0 (Space) 0
ワヲン
MNOmno6 mno6 6
PQRSpqrs7 pqrs7 7
WXYZwxyz9 wxyz9 9
-
- E 、。! ?・( ) ’ " , : ; ¥&
*1 Press a key for 1+ seconds to enter the next character assigned to
the same key.
*2 Press to enter [K] (line breaks). [K] appears as a single-byte
character but is counted as a double-byte character. Edit/Delete new line mark like any other character.
*3 Press 0 for 1+ seconds to enter “+”.
One double-byte character is counted as 2 single-byte characters.
A single-byte dakuten/handakuten mark is counted as a single
character.
Single-byte
alphanumeric input mode
Lower case
Single-byte
numeric
mode
ABCabc2 abc2 2
DEFdef3 def3 3
GHIghi4 ghi4 4
JKLjkl5 jkl5 5
TUVtuv8 tuv8 8
*1 *3
*2
Appendix/External Devices/Troubleshooting
#
477

Dial key assignments (2-touch)

Note
Double-byte
Upper case mode
Single-byte
Upper case mode
Special symbols
Appendix/External Devices/Troubleshooting
* Press 8 O 0 to switch between upper case mode and lower
case mode.
For , characters can be entered in lower case when in lower case
mode.
In double-byte lower-case mode, press 0 O 4 to enter “、” and
0 O 5 to enter “。”.
In single-byte lower-case mode, press 0 O 4 to enter “,” and
0 O 5 to enter “.”.
In single-byte upper-case mode, f and e are counted as 2
single-byte characters.
Empty boxes in the above charts indicate spaces. For , after inputting text, press m to convert between upper
case and lower case.

Symbols/Special character list

Double-byte symbols/Special characters
Special symbols may not appear properly on PCs and mobile
phones that do not support i-mode.
Single-byte symbols
478

Pictograph/Emoticon list

Pictograph list
Enter reading to convert to pictograph.
Keyword
(Reading)
はーと、はあと かお、うまい かたつむり だっしゅ
はーと、 こよひおかとあは
しつれん、はーと、 はあと
はーと、はあと やじるし、ぐっど さかな おーけー
かお、にこ やじるし、 ーじぬえまうどっば
かお、 たぶわんでかむ
かお、かなしい でんわ、けいたい おんぷ みみ
かお、かなしい めーる おんぷ ぐー
かお、ふらふら らぶれたー おんせん ちょき、ぶい
かお、にこ でんわ きす
かお、あせ めーる ぴかぴか、きらきら あし
かお、あせ ふぁっくす ひらめき はしる、ひと
かお、 、かむれはかむ いかり じてんしゃ
かお、ぼけ くもり ぱんち でんしゃ
はーと あめ、かさ ばくだん ちかてつ
かお、 、るねきゆーべ ねむい しんかんせん
かお、ういんく かみなり びっくり くるま
かお、にこ、うれし い
かお、がまん、かな しい
かお、 きうこひせあぬいいしなか
かお、なみだ、かな しい
Picto-
Keyword
graph
(Reading)
かお、げっそり、さ けび
うずまき、たいふう びっくり くるま
めさここね
Picto-
Keyword
graph
(Reading)
ぺんぎん
しょうげき、いらい ら
Picto­graph
ーぱいいわかもめおか
おーけー、ぐっど、 ないす
すばりくっびりき
ふね
Keyword
(Reading)
、とっよせあこね
りぞーと
Keyword
(Reading)
ゆうびんきょく おにぎり、 ざにかんほびすむお
Picto-
びょういん けーき りぼん ししざ
graph
ぎんこう らーめん、どんぶり ぷれぜんと おとめざ
ぎんこう、えー てぃーえむ
ほてる ぶてぃっく てれび さそりざ
こんびに はさみ、びよういん げーむ いてざ
がそりん、すたんど からおけ しーでぃー やぎざ
ちゅうしゃじょう えいが べる、ちゃぺる みずがめざ
ふじさん、やま あーと ぱそこん つき
しんごう えんげき れんち、こうぐ はんげつ、つき
といれ いべんと えんぴつ みかづき、つき
れすとらん ちけっと おうかん まんげつ、つき
きっさてん すぽーつ ゆびわ あいもーど
びーる、さけ ごるふ おちゃ、
とっくり、さけ てにす うでどけい、とけい あいあぷり
わいん、 もこどつくーかっさけさ
はんばーがー すきー
くろーばー ばすけっと、ばすけ さいふ ゆうりょう
さくらんぼ、ちぇ りー
ちゅーりっぷ、はな すのぼ
ばなな
りんご たばこ、きつえん くるまいす りたーん
Picto-
Keyword
graph
(Reading)
ぱん、しょくぱん ばーすでー てんびんざ
ぽけっとべる、ぽけ べる
Picto-
Keyword
graph
(Reading)
、ねかおくがんおみな どるぶくろ しんげつ、つき
、いけどなすうゅきやーば
ゆのみ あいあぷり
てぃーしゃつ、しゃ つ
、にべちくたは けしょう ふりー、むりょう
じーんず、じーぱ ん、ずぼん
めがね
とけい あいもーど
Continued on next page
Picto­graph
どこも
あいでぃー
かぎ、しーくれっ と、ぱすわーど
Keyword
(Reading)
ざじつひおんえんきすますりく
ざしうおらめかじみもえい
ざごたふんばからくさるび
ざおうあどちんえうゆうこっが
Picto­graph
Appendix/External Devices/Troubleshooting
479
Keyword
(Reading)
くりあ
むしめがね、るー ぺ、さーち
にゅー きんし きゅー、く かちんこ
はた
ふりーだいやる ごうかく はーと、はあと ぺん
しゃーぷだいやる
Appendix/External Devices/Troubleshooting
てぃーえむ、とれーど まーく、しょうひょう
まるひ
りさいくる ろく
Picto-
Keyword
graph
(Reading)
まるあーる、しょう ひょう
きけん、 、しるじやちはくこいけ じょうげ
あき、くうしつ、く うせき、くうしゃ
まんしつ、まんせ き、まんしゃ
よん、し やじるし、みぎした おん
Picto-
Keyword
graph
(Reading)
なな、しち やじるし、さゆう
すぺーど ひとかげ
やじるし、ひだりう え
やじるし、ひだりし た
Picto­graph
、ーばーろくぷっりく くらぶ よる、つき
、しるじやんさといらーぴこ みぎうえ すーん
The pictographs may not appear properly depending on the model
of the receiving terminal. In addition, pictographs may not appear properly on PCs and mobile phones that do not support i-mode. Pictographs other than e, d, f appear as spaces in SMS.
Emoticon list
すいやいだちいーゅきばも
えんど
とけい
Keyword
(Reading)
ろくふろぜ
Picto­graph

Phrase list

1.ne.jp
2.co.jp 2
3.ac.jp 3
Internet
4.or.jp 4
5.go.jp 5
6.com 6 7 @docomo.ne.jp 7 8 http:// 8 9 www. 9
おはようございます
1
おやすみなさい
2
昨日は、どうもありがとうご
3
Greetings
ざいました 行ってきます
4
いってらっしゃい
5
お疲れ様でした
6
お世話になっております
7
こんにちは
8
こんばんは
9
直行します
1
直帰します
2
休暇をとります
3
Business
半休します
4
電車遅延のため、遅れます
5
本日の会議は中止となりました
6
出欠をご連絡ください
7
次の指示を待ってください
8
携帯の電源を切ります
9
Original phrases are not registered in the handset at the time of purchase.
遊びに行こう
1
飲みに行きませんか? 遅れます
Private
変更します 中止です 先に行きます 先に帰ります 時間です 何してるの?
OKです
1
NGです
2
ありがとう
3
Reply
ごめんなさい
4
待ってて
5
今忙しい
6
後で連絡入れます
7
保留です
8
キャンセルです
9 1 --------------------
Original Phrases
2 -------------------­3 -------------------­4 -------------------­5 -------------------­6 -------------------­7 -------------------­8 -------------------­9 --------------------
480
Transmission
type
Current transmission

Multiaccess combinations

The following are the main combinations of transmission functions that can operate simultaneously.
Voice call
Make
Phone C*1C*1BB*4AAAAAAABB*4BB*4BAA Videophone BB i-mode AAC i-appli transmission C
Transmitting data (packet)
Transmitting data (64K)
PushTalk transmission
PushTalkPlus (Network connection)
AABB
BB*4BB*4BBBBABBBB*4BB B B B BC*5BB*4BBBBABBBB*4B*8B
AABB
1Seg AABC
A : Current transmission is retained and new transmission is processed. B : Current transmission is retained (Cannot process new transmission). C: New transmission is processed depending on the condition.
*1 Available when subscribed to Call Waiting (nP. 428). *2 Receive a Videophone call or continue packet transmission (nP. 84). *3 i-mode/i-appli transmission is disconnected and new transmission is processed. *4 The call is saved in Received calls (excluding PushTalk reconnected call). *5 When Set PushTalk arrival action is set to [Call Rejection] (Default setting: [Answer]), the current PushTalk call is continued. Change Set
PushTalk arrival action to a setting other than [Call Rejection] to answer a voice call during a PushTalk call (nP. 94). After the setting is changed, PushTalk transmission is terminated if voice call is received and answered. If the voice call is ignored, the PushTalk is not terminated.
*6 Videophone call is transmitted after disconnecting i-mode connection. *7 When i-mode arrival action is set to [PushTalk preferred] (default setting), i-mode and i-appli transmissions are disconnected and a new
transmission is processed (nP. 187).
*8 Sending a transmission to add a member is possible only when the PushTalk sender is Myself (PushTalk is not saved in Redial). *9 When an incoming call is answered, 1Seg is terminated.
Videophone
Receive
Make
Receive
*4
BB*4BBBBABBBB*4BB B B B
*6C*2
*3C*3C*3C*2
i-mode mail
i-mode
Send
BAAAABBBB*4C*3C BC*3AC*3ABBBB*4C*3C
*4
BBBBABBBB*4BB B B A
*4
BBBBABBBB*4AA B B B
*9
AAAAAAAAAAA A A B
Receive
Send
SMS
Receive
Data trans. (packet)
Send
Receive
Data trans. (64K)
Send
Receive
PushTalk
Make
Receive
PushTalkPlus
Network connection
*7
*7
*4
Positioning
location
BAA BC*3B
BBB
1Seg
481
Appendix/External Devices/Troubleshooting

Multi Assistant (Multitask) combinations

Current function
Additional function
The following are the main combinations of functions operable simultaneously.
Appendix/External Devices/Troubleshooting
Custom menu, Basic menu AAAAAAAAAAAAAA A AAAAAAAAAAA i-appli AAAAAAAAAAABBA B BBBABBBBBAA PDF Viewer, My Documents Activate 1Seg AAAABAAAAABAAA A AAABBAAABAA Phonebook,
PushTalk phonebook Text memo AAAAAAABAAAAAA A AAAAAAAAAAA Calculator AAAAAABAAAAAAA A AAAAAAAAAAA Schedule AAAAABAAAAAAAA A AAAAAAAAAAA Data box (list screen), My
picture, i-motion Machi-chara, Chara-den
Video player AAAABAAAAABAAA A AABBBBAABAA MUSIC Player AAAAAAAAAAAAAA A AABABBAABAA Voice call AAABBAAAAAAAAA A AABAABAAAAA Manga&BookReader AAAAAAAAAAAAAA A AAAABAAAAAA
482
*
, Melody*,
Multi Assistant screen/Call from history
Mail/Read mail
Dial input/Voice calling
PushTalk calling
Videophone calling
Schedule/View schedule
Calculator
Tex t me m o
Open phonebook
Phonebook
Manner mode/Light&Power saver set
Supportbook
Tor uCa
GPS
Full Browser Bookmark
Full Browser/i-mode Bookmark/
i-mode
Document Viewer
Data box (list screen)
1Seg menu
i-appli/IC card contents/DCMX
MUSIC Player
i-Channel
Manga&BookReader
Music&Video Channel
Bluetooth/Use Bluetooth
Quick search/Perform Quick search
AAAAAAAAAAAAAA A ABBABBBBBAA
AAAAAAAABBAAAA A AAAAAAAAAAA
AAAAAAAAAAAAAA A AABABBAABAA
Multi Assistant screen/Call from history
Current function
Additional function
Mail/Read mail
Dial input/Voice calling
PushTalk calling
Videophone calling
Schedule/View schedule
Calculator
Text memo
Open phonebook
Phonebook
Manner mode/Light&Power saver set
Supportbook
Tor uCa
GPS
Full Browser Bookmark
Full Browser/i-mode Bookmark/
i-mode
Document Viewer
Data box (list screen)
1Seg menu
i-appli/IC card contents/DCMX
MUSIC Player
i-Channel
Manga&BookReader
Music&Video Channel
To ru C a AAAAAAAAAAAABA A AAAABAAAAAA Full Browser AAAAAAAAAAAAAA B BAAABABAAAA Mail/Compose message AAAAAAAAAAAAAA A AAAAAAAAAAA GPS AAAAAAAAAAAAAB A AAAAAAAAAAA Music&Video Channel AAAAAAAAAAAAAA A AABABBAABAA Data transmission (packet) ABABBBBBAABBBB B BBBABBBBAAB IC card contents, DCMX AAAAAAAAAAABBA B BBBABBBBBAA Document Viewer AAAAAAAAAAAAAA A AAAABABAAAA i-mode, i-Channel AAAAAAAAAAAAAA B BBAABABAAAA Bluetooth function AAAAAAAAAAAAAA A AAAAAAAAABA Quick search AAAAAAAAAAAAAA A AAAAAAAAAAA
A: Available function B: Unavailable function. Displayed in gray.
* Background playback is not available for i-motion player or Melody player.
Multi Assistant may not be available when using a function not listed under “Current function” in the table. Combinations shown in the table may not be entirely correct depending on the status of the application. Multi Assistant is sometimes not available as shown above when memory is running low. Document Viewer may not be available when operating i-mode/Full Browser. Press s in the Multi Assistant screen to retrieve “Dial input”.
Bluetooth/Use Bluetooth
Quick search/Perform Quick search
Appendix/External Devices/Troubleshooting
483
Services available from the FOMA
Note
terminal
Services available from the FOMA
Directory assistance service (fees apply: assistance fee + call fee) Phone numbers of customers who
Appendix/External Devices/Troubleshooting
decline being listed are not available.
Telegrams (fees apply: telegram fee) (No area code) 115
Time tone service (fees apply) (No area code) 117
Weather forecast (fees apply) Area code of region + 177
Police emergencies (No area code) 110
Fire department/Medical assistance (No area code) 119
Emergencies and accidents at sea (No area code) 118
Disaster message (fees apply) (No area code) 171
Collect call (fees apply: assistance fee + call fee)
An additional 90 yen (94.5 yen including tax) handling fee is
charged to the recipient for each call when collect calls (106) are made (as of April 2008).
An additional 100 yen (105 yen including tax) directory fee is
charged when using directory assistance (104). People with disabilities in vision or upper limbs can receive this service free of charge. For details, call 116 (NTT sales counter) from a landline phone (as of April 2008).
If landline phones subscribed to “Call forwarding” are set to forward calls to mobile phones, callers may hear the phone ringing even if the mobile phone is busy, outside the service area, in Self mode or turned off depending on the settings for the landline phones/mobile phones.
terminal
Phone number
(No area code) 104
(No area code) 106
Services such as 116 (NTT sales counter), Dial Q2, message
service and credit card calls are not available (Automatic credit card calls to a FOMA terminal can be made from a landline telephone or payphone).
This FOMA terminal supports “Location notification of emergency
call”. When dialing an emergency number such as 110, 118, and 119, the information of your location (location information) is automatically notified to the agency that receive the emergency call (e.g. the police station). Depending on your location and the reception status of the signal, the agency that received the emergency call may not be able to confirm the exact location. If the location information is notified, the name of the agency that received the emergency call is displayed in the stand-by display. If you are not sending your caller ID by calling with 184 added or other means, your location information and phone number are not notified. However, if the agency that received the emergency call considers your location information and phone number necessary for important purposes, such as life saving, the agency can retrieve them regardless of your settings. In addition, the area/timing to introduce “Location notification of emergency call” depends on the state of preparation in each agency that receives emergency calls.
When calling 110, 119, and 118 from your FOMA terminal, the
police or fire stations may return your call for verification purposes. State that you are calling from a mobile phone, and give your phone number and exact location. Remain stationary to ensure that you are not disconnected while making an emergency call, and keep handset turned on to receive calls for approximately 10 minutes afterwards.
Depending on the region, calls to the police or fire station may not
be connected. In such cases, use the nearest payphone or landline phone.
484

Options and accessories

Sharp Data Communication Support Center TEL: 03-5396-2351 Hours: 10:00 A.M. to 12:00 noon, 1:00 P.M. to 5:00 P.M., Monday through Friday (Closed on weekends, national holidays, and company holidays)
Combine the FOMA terminal with various optional accessories (sold separately) for expanded personal and business use. Some products may not be available in certain areas. Contact a DoCoMo Shop or retailer for details. Refer to the user’s guide of each product for more details.
*1
FOMA AC Adapter 01/02 Battery Pack SH17 Back Cover SH21 Desktop Holder SH19 Earphone Terminal P001 Flat-plug Stereo Earphone Set
*3
P01
Flat-plug Earphone/Microphone
with Switch P01
Stereo Earphone Set P001 Earphone/Microphone with
Switch P001
Earphone Plug Adapter P001 Earphone Plug Adapter for
External connector terminal 01
FOMA USB Cable Wireless Earphone Set 02
*1 Refer to P. 51 and P. 52 for details on charging with an AC
adapter.
*2 Connect Earphone Plug Adapter for External connector terminal
01 and Earphone Plug Adapter to use these options and accessories.
*3 Connect Earphone Plug Adapter for External connector terminal
01 to use these options and accessories.
*4 The use of USB HUB may not work correctly.
*2
*3
/P02
/P002
*2
*4
FOMA AC Adapter 01 for Global
*1
use
FOMA DC Adapter 01/02
*2
*3
FOMA Indoor Booster Antenna*5
In-Car Hands-Free Kit 01 FOMA In-Car Hands-free Cable
01
In-Car Holder 01 FOMA Dry Battery Adapter 01
*2
Carry Case L 01 Bone conduction microphone/
receiver 01/02
*3
FOMA USB Cable with Charge
Function 01
FOMA Portable Charging
Adapter 01
FOMA Indoor Booster Antenna
(Stand Type)
*4
/02
*5
*5 For use only in Japan. *6 FOMA In-Car Hands-Free Cable 01 is required to charge and
connect with the USB cable.
*7 Activate Side key guard settings to use the In-Car Holder 01.

Using with external devices

Using supported external devices, play back movies saved on microSD Cards on the FOMA terminal. microSD Cards are sold separately. Purchase microSD Cards at home electronics shops (nP. 332).
*6
For details on compatible devices, refer to http:// k-tai.sharp.co.jp/support/d/sh906i/. Or, contact the number
below.
*7
*4
Play i-motion created on external devices (including music data in
AAC format) on the FOMA terminal (nP. 372).
* Some movies cannot be played back depending on the file format
or the type of external device.
Check the phone number carefully before dialing.
*
Appendix/External Devices/Troubleshooting
485
About movie player software
QuickTime™ Player (Free) ver. 6.4 or later (or ver. 6.3+3GPP) provided by Apple Computer, Inc. is required to play back movies on a PC. QuickTime™ Player can be downloaded from the following web page.
http://www.apple.com/jp/quicktime/download/
To download, a PC connected to the Internet is required. Additional
transmission fees are charged for downloading.
Refer to the Apple Computer, Inc. web page for details on the
operating environment, downloading, and usage instructions.
Appendix/External Devices/Troubleshooting

Troubleshooting

First, check whether the software update is required. If it is required, update the software (Updating software nP. 504).
Problem Explanation Page
Does not function
Power turns off
Is the FOMA terminal turned off? Is the battery level sufficient? Is the battery pack inserted properly?
Is the IC portion of the FOMA card dirty? Is the battery pack connector terminal side
or connector terminal for the battery pack (charger terminal) on the FOMA terminal dirty?
P. 5 5 P. 5 5 P. 5 0
P. 4 7 P. 5 0
Problem Explanation Page
Does not recharge
Keys do not respond
Optical TOUCH CRUISER does not function properly
A appears and calls cannot be made
Calls cannot be made from the phonebook
Calls cannot be made with the dial keys
Is the battery pack inserted properly? Is the temperature of the FOMA terminal
or battery high?
Is the charger terminal dirty?
Clean terminal with a cotton swab.
Is the AC adapter connector properly
connected to the FOMA terminal and Desktop holder?
Is the FOMA terminal properly set in the
Desktop holder?
Is the FOMA terminal turned off? Is All lock or Side key guard active?
Move the pointer or cursor just as
covering the whole operating range of the Optical TOUCH CRUISER with finger.
Turn the FOMA terminal off, and then turn
it on again.
Is the handset outside the service area or
in a place with a weak signal?
Is Function lock applied to the
Phonebook?
Is All lock enabled?
Is Keypad dial lock set? Is All lock enabled?
P. 5 0 P. 5 1
P. 5 2 P. 5 3
P. 5 3
P. 5 5 P. 132 P. 137
P. 4 0
P. 5 5
P. 3 4
P. 134
P. 132
P. 136 P. 132
486
Problem Explanation Page
Busy signal sounds after dialing
When a message is received, set ring tone does not sound
Ring tone does not sound
When a message is received, a different ring tone sounds
Was 090, 080, 070 or the area code
dialed?
Does A appear? If the other party’s signal is weak, the call
may not connect.
Is Receive/Auto send display set to
[Operation first]?
Is the phone ring volume set to [Silent]? Is the Voice Mail Service active and is the
ringing time set to [0 seconds]?
Is Public mode (Drive mode) active? Is Manner mode active?
When a specific mail ring tone is saved in
the phonebook for a particular group, that mail ring tone sounds.
When different mail ring tones are set for
both individual and group, the mail ring tone for the individual sounds.
When multiple messages are received,
the specific mail ring tone of the last person sounds.
P. 6 1
P. 3 4
P. 2 20
P. 1 09 P. 4 27
P. 7 4
P. 11 3
P. 1 01
P. 1 08
Problem Explanation Page
When a call or mail is received, LED flashes in another way than settings
[Service not registered] appears
Display is blank
Screen is washed out or patterns appear
IC card (for FeliCa functions) is unusable
When a call or mail is received from the
other party for which group called LED/ group mail LED is set, LED flashes according to the LED settings that are made for the group.
When a call or mail is received from the
other party for which both phonebook called LED/phonebook mail LED and group called LED/group mail LED are set, LED flashes according to the LED settings made with phonebook called LED/ phonebook mail LED.
When multiple messages are received,
LED flashes according to the LED settings made for the last received mail address.
Subscription is required to use i-mode. If contract is made for i-mode after
purchase, turn off the FOMA terminal power and restart.
Is the FOMA terminal turned off? Is the battery level sufficient? Is Power saver mode active? Is Auto power OFF set?
Is VeilView set to enabled? P. 125
Is IC card lock or Omakase Lock enabled?
Is the battery level sufficient?
P. 101
P. 123
– –
P. 5 5
P. 5 5 P. 11 8 P. 384
P. 133 P. 263
P. 5 5
Appendix/External Devices/Troubleshooting
Continued on next page
487
Problem Explanation Page [Already downloaded]
Appendix/External Devices/Troubleshooting
Total calls cost does not increase
Data is not transferred
Cannot watch 1Seg
Cannot position the present location
Cannot use location notification/ location provision
Total calls cost for FOMA card does not
increase when maximum limit (approximately 16,770,000 yen) has been reached. Reset total calls cost to 0 yen.
Is USB HUB used? The use of USB HUB
may not work correctly.
Is the handset outside the area of a
terrestrial digital TV broadcasting service or in a place with a weak signal?
Is the FOMA card properly inserted? Is Channel setting set?
i-mode subscription is required to use the
service.
Is the location service client set correctly? Is Location provision ON/OFF set to [Loc.
provision:OFF]?
Is the settings required for location
provision made with Service settings?

List of error messages

Major error messages displayed on the FOMA terminal are shown in alphanumeric order.
Numbers in brackets ( ) appearing in i-mode error messages are
sent from the i-mode center as a code to distinguish between errors.
[A Network error has occurred.]
Appears when an error occurs in the system at Position location,
Location notification and Location provision or the service is not subscribed to.
488
P. 3 97
P. 2 82
P. 4 7
P. 2 84
P. 2 77 P. 2 73
P. 2 76
The same version of the software has been already downloaded.
nP. 247
[An attached file will be deleted]
File with restrictions for i-mode mail attachment or output from the
FOMA terminal is attached to i-mode mail to be forwarded or replied to with Reply with quote. After the message appears, the i-mode mail without the attachment appears on the i-mode message editing screen. nP. 203
[An error has occurred Viewer will close]
Appears when Document Viewer is activated and an error has
occurred in analyzing while loading the next page. Appears when file data is corrupted.
[Area mail received]
When Area Mail is set to be received and is received, this
message may appear. The screen before reception reappears after a short while. nP. 225
[Attachable size exceeded. Unable to attach]
File exceeds size limit and cannot be attached.
Delete some of message text or send message without attaching the file. nP. 203
[Authentication canceled]
Appears when [Cancel] is selected or c is pressed in the
authentication screen.
[Authentication type is not supported (401)]
Appears when authentication is not possible.
Previous screen reappears.
[B number dialing is not available when using abroad. A number dialing will be performed]
Appears if calling is attempted with Number B when the 2in1 is
used overseas. Select [Call] to call with Number A. Select [No ID dialing] to call without sending ID. nP. 435
[Battery empty. Unsaved data will be lost. Ending current operation]
Appears if battery starts to run out. Charge the battery. nP. 51,
P. 5 5
[Battery low]
Battery level is low. Camera mode cannot be activated. Use after
fully charging the battery. nP. 5 1
[Battery low. Unable to record anymore]
Appears when the battery level is low while recording is in
progress.
[Battery too low. Please recharge and retry]
Appears when battery level is # or $ while updating software.
Recharge battery to ". nP. 5 1
[Bluetooth connection failed] [Unable to connect to (service name)]
Appears when the connection to Bluetooth devices has failed.
nP. 4 0 5
[Camera function is not available now]
Appears when activating camera while camera portion becomes
hot from being stored in a hot place. Use the camera after letting it cool down.
May appear and end the camera due to functional limitations when
a call is received and others are performed while the camera shooting screen is shown. In such cases, activate camera again.
May appear when the FOMA terminal is opened if the terminal is
closed immediately after the camera is activated from phonebook or mail. Activate the camera again.
[Capacity exceeded. Some data may be lost. End editing?]
Appears when message text alone exceeds 10,000 bytes. Select
[Yes] to open the compose message screen. Excess data is deleted and y appears. Depending on mail content (text, images, etc.), excess data may not be deleted. To re-edit, select [No] and the message entry screen reappears. Edit to 10,000 bytes or less.
[Certificate is rejected (tampered)]
Appears when rewritten SSL certificate is received. SSL session
cannot be performed with this site or Internet web page. nP. 171
[Connection failed]
Appears when host is set incorrectly.
Properly reset [Host selection] in i-mode settings. nP. 18 5
Site or Internet web page connection failed for an unspecified
reason. Try again later. nP. 170
Appears when software could not be updated. Perform software
update again. nP. 504
[Connection failed (403)]
Site or Internet web page connection failed for an unspecified
reason. Try again later. nP. 170
[Connection interrupted]
i-mode has been disconnected due to a weak signal.
Try i-mode again after moving to an area with a strong signal. nP. 3 4
When this message appears in spite of a signal is strong and ],
the site or Internet web page is extremely congested. Try again later.
Appendix/External Devices/Troubleshooting
Continued on next page
489
(During Ir exchange or Bluetooth communication) [Connection suspended] [No response. Retry?] [Authentication failed. Retry?]
Appears when canceling Ir exchange or Bluetooth communication.
nP. 351, P. 403
Appears when the other party could not be recognized. Select
[Yes] to try again. nP. 351, P. 403
Appears when Ir exchange or Bluetooth communication was not
properly performed. Select [Yes] to try again. nP. 351, P. 403
[Content length exceeds maximum size for i-motion]
Appendix/External Devices/Troubleshooting
Appears when the file of Standard type i-motion that can be
split-downloaded or Streaming type i-motion exceeds 10 MB and cannot be downloaded. nP. 190
[Content length exceeds replayable size for i-motion]
Appears when Standard type i-motion file exceeds 500 KB and
cannot be downloaded. nP. 190
[Continue using i-appli and transmit data?]
When [No] is selected for [Data transmission is frequent. Continue
transmission?], this message appears when i-appli once again attempts transmission.
To transmit and continue use of i-appli, select [Yes]. To not
transmit and continue the use of i-appli, select [No]. Select [Terminate] to end i-appli.
[Copy-protected program]
Appears when the 1Seg program cannot be recorded.
[Copy-protected program. End recording]
Appears when the 1Seg program that program cannot be
recorded starts during recording.
[Copyright information is incorrect. Delete all from the WMA folder]
Appears when WMA files in microSD Card that have been played
back with a FOMA terminal is attempted to be played back with other FOMA terminals. nP. 371
Appears when the database of WMA files is damaged.
[Current UIM is not registered as IC owner. Unable to download/ update/run]
Appears when the information of an inserted FOMA card (UIM) is
different from that mapped to FeliCa. Insert UIM registered as IC owner to use this function. nP. 25 6
[Data in B mode phonebook is unavailable]
Appears if sending PushTalk is attempted to a person whose
Phonebook 2in1 set is set to [B] when the 2in1 mode is set to [Dual mode]. nP. 9 2
[Data in IC card is full. Unable to download. Delete service?]
Appears when space of IC card is not enough to download
Osaifu-Keitai compatible i-appli. Select [Yes] to display the already registered Osaifu-Keitai compatible i-appli list and the capacity (bytes) in the IC card. After checking how much capacity is lacking, select the services to be deleted and start i-appli to delete them. Depending on the Osaifu-Keitai compatible i-appli, however, only the Osaifu-Keitai compatible i-appli list appears after selecting [Yes]. In this case, select the i-appli to be deleted from the list.
[Data transmission is frequent. Continue transmission?]
Appears when data transmission is noticeably frequent during
i-appli use.
To transmit and continue use of i-appli, select [Yes]. To not
transmit and continue the use of i-appli, select [No]. Select [Terminate] to end i-appli.
490
[Database recovery will be performed]
Restoration for the database in Data box is performed.
The following information or others in Data box may not be restored.
Damaged dataFolders created by users
However, data in the folders is not deleted and remain in the source folders.
i-motion and music data with file restrictionsPDF files that are not pre-installedSome data saved in Data box, which is used by i-appli
[Disable accept calls]
Accept calls is set.
Disable and try again. nP. 138
[Document may not be fully displayed]
File size is too large to be displayed in Document Viewer.
nP. 3 5 8
Appears when file contains functions unsupported by Document
Viewer. nP. 35 8
Appears when memory is low and Document Viewer does not start
properly.
Appears when connection times out while starting Document
Viewer. Occurs when file requires an extended period of time for analysis.
Appears when an attempt to display file properties failed.
[Download canceled]
Appears when downloading is canceled during download.
[Download failed] [Invalid content Download failed]
Appears when there is no data to download, or the data is invalid.
Downloading is not possible.
Downloading is not possible due to invalid data or unsupported
format.
[Duplicate address deleted]
A duplicate address is deleted when the same mail address is set
as address or broadcast for i-mode mail. nP. 19 8
[End pic shooting. Use camera later]
Appears when FOMA terminal or camera portion becomes hot
from being used for an extended period of time. Use the camera after letting it cool down.
[Enter correct network security code]
Appears when an incorrect network security code is entered. Enter
correct network security code. FOMA terminal owner will be asked to bring FOMA terminal and identification (a driver’s license, etc.) to a DoCoMo Shop in the case of a forgotten network security code. nP. 128
[Entered value is invalid]
Appears when a domain (From) is selected in Sort rules of
Received mail if @ is included in the entered domain. nP. 218
Appears when Receive entry of Area Mail is set if the MessageID
is not correct. nP. 22 6
[Error in image. Does not work correctly]
Flash movie has an error.
[Exceeds max number of simultaneous calls]
Appears when PushTalk transmissions are sent to five members
or more from the PushTalk phonebook. Set four members or less. nP. 9 2
[Folder is full]
If i-mode mail is received when there is no available space in
memory and no unprotected read mail, [Folder is full] appears.[0] appears for the number of messages in the receive complete screen.
Appendix/External Devices/Troubleshooting
Continued on next page
491
[Function is already running End and restart?]
Appears when a function that is already running is selected. Quit
the function and run again or switch to the screen for the running function.
[Function is locked]
Function lock is set. Disable and try again. nP. 134
[Handset/UIM is full. Unable to receive anymore] [Handset memory is full. Unable to receive anymore] [UIM is full. Unable to receive anymore]
Appendix/External Devices/Troubleshooting
Appears when the FOMA terminal handset and FOMA card
memory are full and new SMS cannot be received. Check the unread i-mode mail/SMS (nP. 205, P. 227), disable the protect (nP. 215), and delete the unnecessary i-mode mail/SMS (nP. 215, P. 228) on the FOMA terminal handset and FOMA card.
[“i-appli To” function is not set]
Appears when attempting to start software, unauthorized to be
linked, from a site, Internet web page, Message R/F, or i-mode mail. The software could not be started. nP. 245
[Incompatible function running. Unable to start Please end the function pushing the Multi button]
Function that cannot be used simultaneously is running.
Quit the function and try again.
[Input error (205)]
Appears when server is about to reset contents after sending text
entered in a site or Internet web page. All text and settings entered on the screen are deleted (Content sent before the error message appeared has already been sent).
[Insert UIM]
Make sure the FOMA card is properly inserted. nP. 4 7
[Invalid data. Connection cannot be established (400)]
Connection cannot be established due to errors in sites/Internet
web pages. Check whether the URL is correct. nP. 17 4
[Invalid data is included. Unable to send part of data]
Appears when images with FOMA card security function are
deleted before transmission, while attempting to update the service center with the phonebook of the FOMA terminal handset or to save selected mails.
[Invalid file contents. Unable to display]
The manager information file of microSD Card is incorrect. The
available space of microSD Card is insufficient, and the manager information may not be updated correctly. Delete unnecessary files, increase available memory space and perform “New manager info”. nP. 343
[Invalid UIM. Requested service not available]
Appears when attempting to view screen memo or Message R/F
protected by FOMA card security functions. nP. 48
Appears when attempting to activate i-appli from the software list. Appears when attempting to activate i-appli from sites, Internet
web pages, or i-mode mail. nP. 4 8
[Keypad dial lock]
Disable Keypad dial lock when calling from functions other than
phonebook (excluding microSD Card phonebook) and Redial. nP. 136
[Link set for data in folder. Unable to delete part of data]
Appears when attempting to delete folders containing data that
cannot be deleted, such as data set for stand-by, ring tone, etc., by performing Delete all folders. nP. 346
Appears when folders exist in folders such as xxxSHARP/
xxxSH_UF/PRLxxx. Delete applicable folder with a PC or other
devices, or format a microSD Card. nP. 342
492
[May be unable to fully acquire all data. Acquire data?]
Appears when downloading Standard type i-motion with unknown
file size. nP. 1 9 0
[Memory is almost full]
Appears when the memory space in the FOMA terminal handset is
insufficient and the still picture mode/movie mode is activated.
FOMA terminal handset memory is low. Delete other pictures to
save image with current settings.
[Memory is full]
Appears when the FOMA terminal handset phonebook already
has 1,000 entries saved and a new party is about to be added without entering the memory number. nP. 9 6
[Memory is full. Cannot overwrite]
Appears when memory is full and data cannot be overwritten.
[Memory is full. Unable to save anymore]
Appears when maximum number of entries is exceeded during
copying. Delete unnecessary data and copy data again.
[Memory is full. Unable to update]
Appears when memory is full and data cannot be updated.
[Memory is full or saved data exceeds limit. Overwrite?]
Appears when there is no available memory for saving data or
when the maximum number of data are saved. Save after deleting unnecessary data and files and start again. nP. 348
[Memory low]
Software cannot be run due to lack of available memory. Processing suspended due to lack of available memory. When this
message appears frequently, turn off FOMA terminal power and restart.
[Memory low. Could not record]
Appears when 1Seg programs cannot be recorded with insufficient
space of the FOMA terminal handset or the microSD Card.
[Memory low. End recording]
Appears when available space on the FOMA terminal handset or
the microSD Card becomes insufficient while recording a program.
[Memory low. Unable to receive picture call image]
Appears when memory space in the FOMA terminal handset is
insufficient to store an image, while attempting to update the service center with the phonebook of the FOMA terminal handset.
[Memory shortage. Return to Full Browser Menu]
Appears if available memory space is lacking while viewing an
Internet web page with Full Browser. In this case, select [Agree]. All the open windows are closed.
[microSD is in use. Could not record]
Appears when microSD Card is used at start of recording if Video
recording destination is set to [microSD].
[microSD is not inserted. Could not record]
Appears when microSD Card is not inserted at start of recording if
Video recording destination is set to [microSD]. nP. 33 3
[Music&Video Channel denied] [Music&Video Channel denied. Program deleted]
Music&Video Channel service is not subscribed.
Subscription is required to use Music&Video Channel.
[No content is available (204)]
Appears when there is no data to display at the connected site or
Internet web page.
Appendix/External Devices/Troubleshooting
Continued on next page
493
[No more space Overwrite?]
Appears when screen memo memory is full. Select [Yes] and
select a screen memo to overwrite. Proceed to the save confirmation screen. Select [No] and the site or Internet web page reappears.
[No requested software]
Appears when attempting to start a non-existent i-appli software
from i-mode mail or Ir exchange function. nP. 24 5
(During iC transmission) [No response]
Appendix/External Devices/Troubleshooting
Appears when the other party could not be recognized.
[No response (408)]
Transmission disconnected due to no reply from the site or
Internet web page. Try again later. nP. 1 7 0
[Not enough space. Continue to overwrite?]
Appears when the screen memo is larger than the available
memory space. Select [Yes] and select a screen memo to overwrite. The screen memo is deleted upon selection. Select [No] and the site or Internet web page reappears.
[Omakase Lock activated]
Appears when Omakase Lock is set. nP. 133
[Other functions running. Unable to activate]
Software could not be updated at the set time because other
functions are running. Update immediately or set another date and time. nP. 504
[Out of Digital TV service area. Unable to record]
Appears when the FOMA terminal is in a place where broadcast
waves cannot be received. Move to a location where c appears to use. nP. 2 87
[Out of service area]
Appears when making a Videophone call or network service such
as i-mode, etc. is attempted but handset is outside the service area or in a place with no signal. Retry after moving to a location where ] appears. nP. 3 4
[Page is not found (404)]
Specified site or Internet web page was not found. Site or Internet
web page may not exist.
[Password is not correct (401)]
Appears when authentication is not possible on the authentication
screen.
[Phone/Terminal and UIM ID will be sent]
May appear while viewing sites or Internet web pages. Select [Yes]
to send “Terminal ID and UIM ID”. To abandon sending and return to the previous screen, select [Return] or press c. nP. 17 1
“Terminal ID and UIM ID” are used by the IP (Information Provider)
to identify the handset and offer customized information to each customer, and also determine what contents offered by the IP are available for each handset.
“Terminal ID and UIM ID” are sent to the IP (Information Provider)
using the Internet so a third party may obtain it. However, customer’s phone number, postal address, age and sex are not sent to the IP in this operation.
[PIN1 code blocked]
Appears when power is turned on while PIN1 code is locked.
Enter correct PUK when prompt appears to disable PIN lock. nP. 131
[Please enter security code]
Appears when a restricted operation was attempted while
Function lock is set. Enter correct terminal security code to temporarily disable Function lock and continue operation.
P. 1 3 4
n
494
[Please wait]
The audio line or the packet transmission system is not in service,
or the audio line network or the packet transmission network is extremely congested. Try again later. Press a dial key to erase the message.
Calls to 110, 119 and 118 are available.
However, a call may not be connected depending on phone line conditions.
[Please wait for a while (packet)]
The packet transmission system is not in service, or the packet
transmission network is extremely congested. Try again later.
[PUK blocked]
Appears when power is turned on or a FOMA card operation is
used while PUK is blocked. Contact a DoCoMo Shop. nP. 129
[Receiving data exceeds maximum size for i-motion]
Appears when the file of Standard type i-motion that can be
split-downloaded or Streaming type i-motion exceeds 10 MB and download is not completed. nP. 190
[Receiving data exceeds replayable size for i-motion]
Appears when Standard type i-motion exceeds 500 KB and
download is not completed. nP. 190
[Record error]
Appears when recording is attempted after 400 items are recorded
and Voice recorder ends. Delete unnecessary data before recording. nP. 3 55
[Recording failed]
Appears when shooting is started with the save destination set to
the microSD Card and there is no available space, Camera mode ends and the stand-by display reappears.
[Replay period has expired] [Replay period has expired. Delete?] [View period has expired. Delete?]
Appears when attempting to play/display i-motion, Chaku-uta full
or an e-comic or Music&Video Channels after the allowable replay period has expired. n
[Replay period has not yet started] [View period has not yet started]
Appears when attempting to play/display i-motion, Chaku-uta full
or an e-comic or Music&Video Channels before set replay/view period. n
[Requested software unavailable]
Appears when attempting to start software from a site, Internet
web page, Message R/F, i-mode mail, or Ir exchange function, and the specified software could not be started. nP. 245
Appears when an attempt is made to start a mail-type i-appli when
the 2in1 mode is set to [B mode]. nP. 436
[Root certificate has expired. Connect?]
Appears when a server certificate whose signature has expired is
received. To connect without safety assured, select [Yes]. To not connect, select [No]. Set date and time. nP. 1 7 1
[Root certificate is not valid]
Appears when a certificate set to Disable is received.
Confirm why the certificate was set to Disable. When the certificate has no security problems, set it to Enable, and then reconnect to the site. nP. 1 87
Appears when Root certificate is not set to valid when updating
software. Set certificates 1 to 13 in [Certificates] to valid. nP. 187
[Save aborted]
Appears when data cannot be saved during the download of
i-appli.
P. 1 91, P. 3 60, P. 3 6 6, P. 3 76
P. 1 9 1, P. 3 6 0, P. 3 66, P. 3 7 6
®
®
Appendix/External Devices/Troubleshooting
Continued on next page
495
[Secret data saved]
Appears when Secret mode is not active and secret data is about
to be sent by 2-touch dialing. nP. 98, P. 138
[Security code is wrong] [Please enter 4-8 digits]
Appears when an incorrect terminal security code is entered.
Enter the correct terminal security code. FOMA terminal owner will be asked to bring FOMA terminal and identification (a driver’s license, etc.) to a DoCoMo Shop in the
Appendix/External Devices/Troubleshooting
case of a forgotten terminal security code. n
[Self mode]
Appears when a restricted operation was attempted while in Self
mode. nP. 1 34
[Service is used by the previous software. Unable to download/ update/run. Delete a service?]
When the same service has already been downloaded, a new
service cannot be downloaded/updated/run unless the already registered service is deleted. Select [Yes] to display the service to be deleted. Delete the registered service.
[Service not registered]
i-mode is not subscribed to. Subscription is required to use
i-mode. nP. 170
If contract is made for i-mode after purchase, turn off the FOMA
terminal power and restart.
[Services are full. MUSIC of overwritten service is unable to play. Overwrite?]
Appears when the maximum number of available MUSIC
(subscription) services has been exceeded (50 services). When [Yes] is selected, the MUSIC (subscription) service is overwritten with the oldest expiration date first. In addition, Uta-hodai, which is downloaded from the overwritten MUSIC (subscription) service, becomes unavailable.
P. 1 2 8
[Set the clock to play data] [Set date/time to view this data]
Appears if date and time are not set correctly when attempting to
play/display i-motion with replay restrictions or an e-comic with view restrictions in [Movable contents] folder.
[Size of this page is not supported]
Size of data received from site or Internet web page exceeds
maximum for one page. Receiving is suspended and data received up to suspension is displayed. nP. 17 7
Appears when maximum data size is exceeded while loading a
melody or a downloaded dictionary.
[SMS is full Unable to copy anymore]
Appears when the maximum number of SMS are saved in the
FOMA terminal handset or the FOMA card and no further SMS could be copied. nP. 2 28
[Software already updated]
The i-appli is the latest version, and will not be upgraded.
nP. 247
[Software terminated due to security error]
Invalid action was attempted by i-appli. nP. 24 7 Appears when use of a function not permitted by the software is
attempted. Error history is saved when software is terminated due to a security error. nP. 2 47
[Some items cannot be copied. Copy anyway?]
Since capacity of FOMA terminal handset phonebook and FOMA
card phonebook differ, only the first phone number/mail address is copied to FOMA card. Characters and character limits also differ. Appears if some data cannot be copied. Select [Yes] to copy the first phone number/mail address.
[SSL Session cannot be established]
Appears when an attempt to connect to a site or Internet web page
supporting SSL session failed. Try again later. nP. 1 7 1
496
[SSL session failed]
Appears when an error occurs during SSL authentication and the
SSL session is disconnected. nP. 1 71
[SSL session was terminated]
Appears when FOMA terminal date is not set correctly when
updating software. Set the FOMA terminal date. nP. 57
[There is no image. Unable to save]
Appears when a still picture is attempted to be recorded if Display
mode (L) is set to [Data broadcasting] in the normal position. nP. 2 9 2
[This certificate has expired. Connect?]
Appears when an SSL server certificate that has expired or has
not started its validity period is received. To connect without safety assured, select [Yes]. To not connect, select [No]. nP. 1 7 1
[This certificate is not valid for this URL. Connect?]
Appears when the received SSL server certificate contains invalid
information. To connect without safety assured, select [Yes]. To not connect, select [No]. nP. 171
[This data can no longer be replayed] [This data can no longer be replayed. Delete?] [This data can no longer be viewed. Delete?]
Appears when attempting to play/display i-motion, Chaku-uta full
or an e-comic or Music&Video Channels after the allowable number of replays/views is exceeded. n P. 3 7 6
P. 1 9 1, P. 3 6 0, P. 366,
[This data cannot be replayed. Delete?] [This data cannot be viewed. Delete?]
Appears when attempting to play/display i-motion, Chaku-uta full
or an e-comic with replay/view restrictions after resetting the time setting.
Appears when attempting to play back Uta-hodai in the FOMA
terminal handset without the license of the corresponding MUSIC (subscription) service.
[This data may not be replayed. Download?]
Appears when i-motion file in a format other than MP4 (Mobile
MP4) is loaded. n
[This site is not certified. Connect?]
Appears when a server certificate that cannot be verified on the
FOMA terminal is received. To connect without safety assured, select [Yes]. To not connect, select [No]. nP. 171
[This software contains an error] [This software contains an error. Unable to download]
i-appli data contains an error and software cannot be downloaded
or upgraded.
[This software is not supported by this phone]
Appears when attempting to download an i-appli not supported by
®
the FOMA terminal. The software cannot be downloaded.
[This UIM cannot be recognized]
Appears when a FOMA card not usable by the terminal may have
been inserted.
Appears when FOMA card may be damaged or not properly
inserted. Make sure the FOMA card is properly inserted. nP. 4 7
[Time out]
i-mode center is congested. Try again later.
P. 3 17
®
Appendix/External Devices/Troubleshooting
Continued on next page
497
[To play this data, activate auto time adjust and adjust clock]
Appears if date and time are not set correctly when attempting to
play/display Chaku-uta full with replay restrictions in the [Movable contents] folder. n P. 3 7 6
[Too many devices registered. Overwrite?]
Appears when the maximum number of available Bluetooth
devices has been exceeded (ten devices). When [Yes] is selected, the Bluetooth devices is overwritten with the oldest communication
Appendix/External Devices/Troubleshooting
date and time. nP. 404
[Too many unsent messages. Unable to activate]
Unsent messages are full. New mail cannot be composed.
Send or delete unsent messages and compose again. nP. 204, P. 215
[Too much data was entered]
Data could not be sent because character string or URL entered in
text box or other input field was too long. Retry after erasing some text.
[Transmission failed]
Appears when i-mode mail or SMS was not sent properly. Try
again from a location with a strong signal. When [Address is not valid] appears as well, resend after editing the address. When this message appears with [i-mode Center is busy. Please try again later], try sending again later. When [Target server is full] appears along with this message, mail cannot be sent because a recipient cannot receive the message.
[TVlink is expired]
Appears when expired TVlink is selected. nP. 29 8
[Unable to activate]
Appears when Document Viewer is activated but memory is too
low to activate functions such as Magnifier or Zoom at selected area.
®
, a WMA file or Music&Video Channels
P. 366,
[Unable to authenticate. Register symbol again if error continues]
Appears when writing authentication has failed. If errors persist,
perform Register symbol again. nP. 13 0
[Unable to connect to Bluetooth device.]
Appears if the connection to Bluetooth devices is failed when
Bluetooth output is performed. Sound is output from the FOMA terminal handset. nP. 4 05
[Unable to connect to Bluetooth device. Try again?]
Appears if the connection to Bluetooth devices is failed when
Bluetooth output is performed or the connection is interrupted during output. Select [Reconnect]/[Output (handset)]. nP. 405
[Unable to copy part of data]
Appears when there are files or folders on the microSD Card that
were created on a PC or a handset other than the FOMA SH906i.
[Unable to Format]
Appears when some microSD Cards do not support the copyright
protection functions. microSD Card may be used if inserted again. However, there is no guarantee for the save and copy of data since the microSD Card is unsupported by FOMA terminal. nP. 342
[Unable to open any more window]
Appears if a new window cannot be opened when the number of
frames which can be viewed is exceeded or the memory is low.
[Unable to play. microSD memory is full]
Appears if the free space of microSD Card is 64 KB or less when
attempting to play a WMA file. nP. 37 1
498
[(IPs (Information Providers)) Unable to play data. This service needs to be signed up. Connect to site?]
Appears when the service offered by the IP (Information Provider)
is not subscribed to while expired Uta-hodai is updated. Select [Yes] to go to the IP’s site. nP. 376
[Unable to play this data]
Appears when attempting to play back Uta-hodai in microSD Card
without the license of the corresponding MUSIC (subscription) service.
[Unable to protect anymore]
Number of protected messages for Message R/F exceeds
maximum. Disable protection. nP. 2 2 4
[Unable to receive part of PushTalk group]
Appears when a PushTalk group cannot be registered any more
for the reason that PushTalk groups downloaded from the service center exceed 19 entries or the phone number has already been registered, while attempting to update the service center and the phonebook of the FOMA terminal.
[Unable to record any more]
Three Record messages (voice call) and two Record messages
(Videophone) have been recorded. Delete unnecessary messages and start again. nP. 79
[Unable to renew memory number xxx]
Appears when attempting to save a phonebook entry to the same
memory number that stores secret data when Secret mode is not active. nP. 9 8
Appears when attempting to save a phonebook entry to the same
memory number that stores an entry for Accept/Reject call. nP. 1 3 8
Appears when attempting to save a phonebook entry to the same
memory number that is not displayed by the mode in use while the 2in1 is used. nP. 4 36
[Unable to retrieve the requested URL (504)]
Site or Internet web page connection failed for an unspecified
reason. Try again later. nP. 170
[Unable to save BC ToruCa]
Appears when there is no available memory for saving ToruCa or
when BC ToruCa cannot be saved because the maximum number of ToruCa are saved.
[Unable to save part of data. OK to save?]
Appears when invalid data is included to save the characters
scanned by Character reader to Phonebook. Select [Yes] to save.
[Unable to start any more] [Unable to start any more Please end the function pushing the Multi button]
Appears when the maximum number of functions are running.
Quit unused functions and try again.
[(IPs (Information Providers)) Unable to update.]
Appears when the update of expired Uta-hodai has failed. nP. 376
[(IPs (Information Providers)) Unable to update due to connection failure.]
Appears when a connection cannot be made to the site for an
unspecified reason, causing the update of the expiration date to fail while expired Uta-hodai is updated. Try again later. nP. 3 7 6
[Unable to use PushTalk from call logs of Number B]
Appears if sending PushTalk is attempted from Redial or Received
calls of Number B when the 2in1 mode is set to [Dual mode]. nP. 6 3
[Unable to use PushTalk in B mode]
Appears if sending PushTalk or retrieving PushTalk phonebook is
attempted when the 2in1 mode is set to [B mode]. nP. 87, P. 92
Appendix/External Devices/Troubleshooting
Continued on next page
499
[Unable to use this function]
Appears if composing i-mode mail is attempted from a phonebook
when the 2in1 mode is set to [B mode]. nP. 4 35
[Unavailable channel]
Appears when the 1Seg program stops and broadcast waves
cannot be received.
The message may appear even if the 1Seg program is available
depending on the reception status of broadcast waves.
Appears when the FOMA terminal is in a place where broadcast
Appendix/External Devices/Troubleshooting
waves cannot be received. Move to a location where c appears to use. nP. 2 87
[Unavailable Channel]
Appears when the specified channel is not detected or when the
FOMA terminal is in a place where broadcast waves cannot be received.
[Unsupported. Cannot edit]
Image data is invalid and image cannot be edited.
[Update replay period or sign up when you play next time]
Appears when attempting to play back Uta-hodai that is in the
valid period for updating the expiration date. nP. 376
[URL address changed (301)]
Since the site or Internet web page moved, the URL changed. If an
old URL is registered as bookmark, new URL is registered.
P. 1 78
n
[URL address is not valid (301)] [URL address is not valid (302)]
Data received contains error and cannot be displayed.
Received data is discarded.
[URL has been changed. Connect to site?]
Appears when the URL is changed while expired Uta-hodai is
updated. Select [Yes] to connect to the new address. nP. 3 7 6
[(IPs (Information Providers)) URL has been changed. Unable to update replay period.]
Appears when the update of the expiration date has failed
because the address of the site was changed while expired Uta-hodai is updated. nP. 3 76
[URL is too long to register]
URL exceeds maximum number of characters and cannot be
registered as a bookmark. nP. 1 78
[Usage is currently restricted. Try again later]
Appears when excessive amounts of data is downloaded during a
certain time span for users of the flat-rate i-mode packet transmission service. Connection will be restricted for a certain amount of time. Try i-mode again later. n
[Use the ToruCa automatic reading function in a mobile phone through the reader/writer?]
Appears when ToruCa auto read is set to [OFF] and the automatic
reading function is attempted to use with the scanning device. Select [Yes] to set ToruCa auto read to [ON] and make the automatic reading function available. n
[You already have 3 voice memos saved]
Three Record messages (voice call) and less than two Record
messages (Videophone) have been recorded. Delete unnecessary messages and start again. nP. 79
[You already have two messages saved]
Less than three Record messages (voice call) and two Record
messages (Videophone) have been recorded. Delete unnecessary messages and start again. nP. 79
P. 1 7 0
P. 2 6 2
500
[以下の宛先にはメール送信できませんでした(561) Mails could not be sent to following address. (561) AA@CCC.ne.jp]
The mail address depends on the recipient address.
Appears when mail could not be properly sent to a displayed
address.
[“ACD.ne.jp”宛のメールが混み合っているため、 送信することが できません(555) Unable to send. “ACD.ne.jp” is not available
temporarily.]
The domain name depends on the recipient address.
Appears when the line system is not in service, or when the line is
extremely congested. Try again later.

Warranty and after-sales services

Warranty
Make sure that the warranty card is included with your FOMA
terminal at the time of purchase. Check that the name of the retailer, the date of purchase, and the necessary details have been filled in on the warranty card. Be sure to keep it in a safe place. Contact the retailer if any necessary details on the warranty card are not completed. The warranty period without charge is 1 year from the date of purchase.
For the purpose of improvement, the specifications for this product
and its accessories are subject to complete or partial change without prior notice.
Information registered in your FOMA terminal, such as phonebook
entries, may be lost or damaged if your FOMA terminal is damaged, repaired, or mishandled. It is recommended that a memo be kept of all data stored in the FOMA terminal. If the FOMA terminal is repaired, information downloaded using i-mode and i-appli cannot be transferred (excluding some cases) to a repaired handset due to copyright law.
For this FOMA terminal, phonebook entries, i-motion and data
available for i-appli can be saved to the microSD Card.
For this FOMA terminal, data such as phonebook entries, etc. can
be stored in the Data Storage Center by using the Data Security Service (a paid service that requires subscription).
If you own a PC, you can transfer and store registered information
such as phonebook entries using DoCoMo keitai datalink (nP. 446) and the FOMA USB Cable with Charge Function 01/02 (sold separately) or the FOMA USB Cable (sold separately).
Appendix/External Devices/Troubleshooting
501
After-sales services
技術基準適合認証品
If you have problems with your FOMA
Refer to “Troubleshooting” before requesting repairs. Contact a number listed in Repairs Inquiries on the back of this manual if problems persist.
If your FOMA needs repairs after contacting
DoCoMo
Bring your FOMA terminal to a repair counter that DoCoMo specifies. However, the repair shop is only open during business hours. Make
Appendix/External Devices/Troubleshooting
sure to bring your warranty card with you.
During the warranty period
The FOMA terminal will be repaired without charge in accordance
with the terms of the warranty. When bringing the FOMA terminal in for repairs, be sure to bring the warranty card. Even during the warranty period, a fee will be charged for repairs of malfunctions or damage caused by improper handling by the customer, or when no warranty certificate is presented.
Repairs for damages caused by the use of devices and accessories
other than those specified by DoCoMo will also incur a fee, even during the warranty period.
Repair for damages of the LCD or connector and others after
purchase will incur a fee.
Repairs may not be possible in the following circumstances.
When a repair counter considered water exposure (Example: When
the moisture detection seal has reacted)
As a result of a inspection, when damage from water exposure,
condensation, sweat, or other liquids are found, or when the internal circuit board is damaged or deformed (Repairs may not be possible when external connector terminal (earphone/microphone terminal), LCD, etc. is damaged, or when a housing is cracked)
Even when repairs are possible, repair charges will be incurred
because the warranty does not cover such damage.
After the warranty period has expired
Charged repairs will be carried out upon request.
Replacement parts
Replacement parts (required to maintain the functionality of the FOMA terminal) will be kept in stock basically for 6 years following termination of production. However, note that there may be a case when repair is not possible for the shortage of replacement parts depending on the faulty part. Repairs may be possible even after this period has passed, depending on the type of malfunction. Contact number listed in Repairs Inquiries on the back of this manual for details.
IMPORTANT!
Never attempt to modify the FOMA terminal or its accessories.
May cause fire, injury, or malfunction.If your FOMA terminal has been modified previously, it will only
be accepted for the repair as long as you agree that we restore the FOMA terminal to its original state. However, repairs may be refused depending on the extent of the modification. The following cases may be considered as a modification.
• Stickers are applied to the LCD or keys.
• Decorations are made to the FOMA terminal with adhesive agent.
• Exterior parts are replaced with those which are not standard DoCoMo product.
Repairs for any malfunction or damage caused by such
modifications will incur fees, even during the warranty period.
Do not peel off the model nameplate attached to the FOMA
terminal. The nameplate seal functions as a certification that the
equipment conforms to the prescribed technical standards. If the nameplate is removed or is replaced, repairs may be refused because conformity to the standards cannot be determined.
502
Information stored in your FOMA terminal, such as the settings of
TOP screen Test menu list
QR code to
connect to
the site
various functions and the total call duration, may be cleared or reset if your FOMA terminal is damaged, repaired, or mishandled. If this occurs, please re-enter the information or re-specify the
settings.
The following sections of the FOMA terminal contain parts that
generate magnetic waves. Keep ATM cards and other objects likely to be affected by magnetic waves away from the FOMA terminal. Cards may become unusable.
Sections: speaker, mouthpiece
If your FOMA terminal gets wet or has been in a humid location,
turn off the power, take out the battery immediately, and bring it to a repair counter that DoCoMo specifies as soon as possible. However, depending on the condition, repairs may not be possible.
Memory dial (Phonebook) and downloaded
information
It is recommended that you keep a separate memo of the
information you register on your FOMA terminal. DoCoMo shall not be liable for data that may be modified or lost.
Created, imported, or downloaded data may be modified or deleted
when upgrading or repairing the FOMA terminal. DoCoMo shall not be liable for any modification or deletion of content. DoCoMo may, at our convenience, exchange your FOMA terminal for a substitute in lieu of repairs. For this FOMA terminal, only data including downloaded images or melodies or data created by the user will be transferred at the time of repair (Some contents cannot be transferred. Also, contents may not be transferred depending on the degree of malfunction).
Transferring may take long or be even unavailable depending on
the size of data saved in the FOMA terminal.
iモード故障診断サイト (i-mode fault diagnosis site)
Check whether the FOMA terminal can normally send and receive mail, download images or melodies or perform other operations. The i-mode fault diagnosis site is only available in Japanese.
Accessing the “i-mode fault diagnosis site”
i-mode site: Select [iMenu]/[
/[iモード]/[iモード故障診断
Packet transmission charges do not apply for the
i-mode fault diagnosis.
• Access from abroad is charged.
The test items differ depending on the FOMA terminal
model. In addition, the test items may be changed.
Before checking the operation with the test items, read precautions
in the site carefully to execute the test.
For accessing the i-mode fault diagnosis site and testing mail
transmission, information about your FOMA terminal (model name, mail address, etc.) is automatically sent to the server (i-mode fault diagnosis server). Sent information is only used for i-mode fault diagnosis.
When a malfunction is found after checking, contact the number
listed in “Repairs” on the back of this manual.
お知らせ]/[サービス・機能
].
]
Appendix/External Devices/Troubleshooting
503
Note
Software update

Updating software

Software update
Connect the FOMA terminal to the network and check for software updates. If necessary, use packet transmission* to download software and update. * There is no packet transmission charge for updating software.
Check the DoCoMo website or “お知らせ” (News) on iMenu for
Appendix/External Devices/Troubleshooting
updates.
When updating, select “Auto-update”, “Now update” or “Reserve”.
Auto-update : New software can be updated automatically and
Now update : Update immediately. Reserve : Software updates automatically on set date and time.
Do not remove the battery pack while the software is updating.
Failure to update software may occur.
Software can be updated even if handset contains phonebook,
camera image or download data. However, DoCoMo cannot protect data that could be lost due to malfunction, damage, water exposure and so on. It is recommended that important data be backed up before updating. Note that some data, such as downloaded data, cannot be backed up.
504
rewritten on set time in advance.
Using software update
Software is updated even when host for i-mode is changed to a
custom host.
Recharge battery before updating software. Software cannot be updated during the following conditions.
While in Self modeDuring a call/Outside the service areaConnected to an external deviceOmakase Lock is setDate and time are set incorrectly
Battery level is below the necessary level to update software Updating (downloading and rewriting) software may take time. Making/Receiving calls, transmission functions and other functions
cannot be used while software is being updated (Receiving voice
calls is possible during download). During software update, the handset makes an SSL connection
with the server (DoCoMo site). Set the SSL certificate to valid (The
default setting is [Enable] nP. 187). It is recommended to update software at a location with a strong
signal (three bars for the antenna icon) and you are not moving.
If signal status becomes weak or download is interrupted when
downloading software, update software again in a location with good signal conditions.
If software has already been uploaded, [No update is needed.
Please continue to use as before] appears when software update is
checked. While updating software, received i-mode mail and Message R/F
are held at i-mode center. Received SMS is held at SMS center. If i-mode mail or Message R/F is held at i-mode center, W/G/I
appears but will disappear when software is reloaded after update.
In addition, even if Receive option is set to [ON] and mail is
received during software update, notices may not appear on the
display after update is completed. Mail and messages are held at
i-mode center.
When updating software, information about the FOMA terminal
(model, serial number, etc.) is automatically sent to the server (DoCoMo software update server). Sent information is only used for software update.
If software update fails, [Rewrite failed] appears and all operations
are not available. In this case, bring the FOMA terminal to a repair center that DoCoMo specifies.
Updating of software is not available overseas. During software update, Reception reserve alarm and Recording
reserve alarm are not activated. In addition, watching or recording does not start.
Updating software automatically <Set auto-update>
The new version of software is automatically downloaded, and the software is updated on the time set in advance. When the software becomes ready to be rewritten, the stock icon 6 (Update required) appears to confirm the time when the rewrite starts, the time to rewrite can be changed, and whether to rewrite now can be selected.
Setting auto-update date and time
In the Custom menu, select [Settings]/[General
1
settings]/[Software update]/enter the terminal security code/t/[Set auto-update].
Appendix/External Devices/Troubleshooting
Continued on next page
505
Note
Select the [Set auto-update] field/t/
2
[auto-update].
To not set: Select [disable]/i/[Yes]. If the notification icon appears in stand-by when software must
be updated: Select [only notification]/i.
Select the [Day] field/t/select the day of
3
week/t. Select the [Time] field/t/enter the time/t/
4
Appendix/External Devices/Troubleshooting
i.
If software update cannot be activated at the automatic update
time, the stock icon 6 (Update required) appears in stand-by.
When [only notification] is selected, new software is not
downloaded. For details on downloading and rewriting, refer to “Starting software update” on P. 506.
When the stock icon appears
When the software is automatically downloaded, the stock icon 6 (Update required) appears in stand-by.
In stand-by, press t/select the stock icon 6
1
(Update required)/t.
Select the rewrite method.
2
Select [OK].
• The stand-by display reappears. Rewrite starts when the set time arrives.
Select [Change].
• Set the day of week and time.
Select [Now rewrite].
• Rewrite starts.
• Upon the completion of rewriting, the stock icon 6 (Update completed) appears.
The stock icon disappears when it is confirmed once.
506
Starting software update
To start software update, press the key when the stock icon is displayed on the screen, or perform it from the menu screen.
The stock icon appears in the following cases.
When a notification is received from DoCoMo on setting
auto-update to [only notification]
When Reserve is failed or canceledWhen update is required after the interruption of software update
Starting from the stock icon
In stand-by, press t/select the stock icon 6
1
(Check for update)/t/[Yes].
To not update the software: Select [No].
Enter the terminal security code/t.
2
Numbers are masked with [|]. The default setting is [0000].
Select the update method.
3
When software update is necessary, [Update is needed]
appears.
Select [Now update]/“Updating the software immediately”
on P. 507.
Select [Reserve]/“Setting a time at which update will be
performed” on P. 508.
Select [Cancel]/[Yes]/stand-by display is returned.
When software update is not necessary, [No update is needed.
Please continue to use as before] appears.
When updating software, information about FOMA terminal
(model, serial number, etc.) is automatically sent to the server (DoCoMo software update server). Sent information is only used for software update.
Starting from menu
In the Custom menu, select [Settings]/[General
1
settings]/[Software update]. Enter the terminal security code/t/[Update].
2
Start check of whether software update is necessary. For subsequent operations nstep 3 of “Starting from the stock
icon” on P. 506
Updating the software immediately <Now update>
Select [Now update]/t/start download.
1
Approximately 5 seconds after [Now update] is selected,
download will start automatically.
Once the download starts, software is automatically updated
without selecting menus.
If the download is canceled in mid-course, data downloaded up
to that point is deleted.
For Reserve, [Establishing SSL session (Authenticating)] b
[Negotiating] appears.
Upon the completion of download, [Ready to
2
rewrite?] appears/t.
Approximately 5 seconds after [Ready to rewrite?] appears,
rewriting starts automatically.
During rewriting, all of the keys are disabled. It is not possible to
cancel rewriting. Also, calls cannot be received while rewriting is being performed.
Upon the completion of rewriting, the power is automatically
turned off, and then back on again.
Appendix/External Devices/Troubleshooting
Continued on next page
507
When power is turned on, software update starts
3
automatically.
During update, all of the keys are disabled. It is not possible to
cancel update. Also, calls cannot be received while update is being performed.
Approximately 5 seconds after the completion of updating, the
power is automatically turned off, and then back on again.
[Your update is complete] appears/t.
4
Software update ends and the stand-by display appears.
When the server is congested
Appendix/External Devices/Troubleshooting
When [Server is busy] appears, select [Reserve] and set a date on which updating will be performed (nP. 508).
Post-update display
When the stock icon 6 (Update completed) or 6 (Check update) appears in stand-by, press t. If the terminal security code is entered when software update is incomplete, a message stating so appears. Press t and retry update.
Setting a time at which update will be performed
<Reserve>
Set date and time to update software when downloading takes too much time or the server is extremely congested.
Select [Reserve].
1
Schedule selection screen appears. The time and date are the same as the
server time.
Select the preferred date/time/t/[Yes].
2
Alternatively, select the date and time after selecting [Other
date/time] and accessing the server. In the screen for selecting times, the schedule status appears as [A:Avail] or [C:Limited] for each time slot. Select a time to reconnect to the server and show schedule candidates. Select a schedule.
When the reserved date and time arrives
[Ready to update?] appears/t.
1
Approximately 5 seconds after [Ready to update?] appears,
software update automatically starts.
Before software updates, make sure that the stand-by display is
displayed and the handset is in a place with a strong signal. Software is not updated if the battery level is below the necessary level to update software at the reserved date and time.
Software is not updated if the handset at the reserved date and
time is performing functions such as a call in progress, sending mail, receiving mail, i-mode, i-appli, or using menus. Software update starts when the stand-by display reappears after the operation.
Software is not updated if the handset at the reserved date and
time is being connected to an external device, in Self mode, or in Omakase Lock.
508
If the alarm or another function takes place at the same time
when the reserved date and time arrives, alarm or the function is prioritized and software is not updated. Software is updated if stand-by reappears after Alarm operation ends.
When the FOMA terminal is turned off at the reserved date and
time for software update or when the FOMA terminal is turned off right after the update starts, the update will be canceled.
If “Delete all data (Delete user data)” (nP. 412) is performed
after reservation is completed, the software update is not activated. Reserve the software update again.
Confirming/Changing/Canceling Reservation
In the Custom menu, select
1
[Settings]/[General settings]/ [Software update]/enter the terminal security code/t/ [Update].
Select the item.
2
To confirm: Select [OK]. To change: Select [Change]/select a preferred date
(nP. 508).
To cancel: Select [Cancel]/[Yes].
Scanning function

Protecting your FOMA terminal from harmful files

First, update pattern definitions to bring them up-to-date.
Stop activating or delete any data or applications that could cause operational malfunctions. These types of data include data or programs that are attached to i-mode mail, or downloaded from sites or external devices.
Pattern definitions are used for checking. When new problems are
discovered, pattern definitions are immediately upgraded. Update the pattern definitions.
The scan function helps to protect the handset from damage
caused by data such as data received from web pages or mail. If the pattern definition corresponding to a particular harmful file is not downloaded or saved, the scan function will not be able to protect the FOMA terminal.
Pattern definitions vary depending on the phone model. Therefore,
DoCoMo may discontinue offering pattern definitions for a particular model 3 years after the release date.
Setting scan functions <Set scan>
When Scan function is set to [Enable], data and programs are automatically checked when running. Set whether to apply Scan function to SMS.
Scan message can be set only when Scan function is set to [Enable].
When Scan function is set to [Disable], Scan message is set to
[Disable] regardless of current settings.
Appendix/External Devices/Troubleshooting
Continued on next page
509
In the Custom menu, select
Note
Note
1
[Settings]/[General settings]/ [Scanning function]/[Set scan]/ [Scan].
Select [Enable]/[Yes]/[Scan message]/
2
[Enable]/[Yes].
When Scan function is set and malicious data is detected,
security warning appears in five levels (nP. 51 1 ).
Appendix/External Devices/Troubleshooting
Updating pattern definitions <Update>
In the Custom menu, select [Settings]/[General
1
settings]/[Scanning function]/[Update]/[Yes].
To not send the terminal ID, select [No].
Select [Yes].
2
Downloading starts. When updating is not necessary, [Pattern definitions are
up-to-date] appears. Press t and resume operations.
Press t when updating is completed.
3
When updating pattern definitions, information about the FOMA
terminal (model, serial number, etc.) is automatically sent to the server (DoCoMo scan function server). Sent information is only used for pattern definition update.
Correctly set the FOMA terminal date (year/month/day)
beforehand.
Download may be interrupted if signal is weak.
Updating pattern definitions automatically
<Set auto-update>
Set auto-update to [Enable] to automatically update pattern definitions when a new version becomes available. When auto-update is successful, a message stating so appears. Auto-update is not performed depending on the status of the FOMA terminal. In such cases, a message stating that pattern definitions have been updated appears.
In the Custom menu, select
1
[Settings]/[General settings]/ [Scanning function]/[Set auto-update]/[Enable].
Select [Yes]/[Yes]/[Agree].
2
Information regarding Enable/Disable for Set auto-update is saved
on the network. Therefore, [Enable] is always selected on the FOMA terminal when setting.
When setting auto-update, information about the FOMA terminal
(model, serial number, etc.) is automatically sent to the server (DoCoMo scan function server). Sent information is only used for pattern definition update.
Set auto-update may be interrupted if signal is weak.
510
Displaying scanned results
When data that can cause malfunctions are detected, a warning screen appears.
Displaying scanned results
Displaying, activating, or calling is available. Appears when there was an error
Level 0
Level 1
Level 2
previously, but there is no error presently. Select [Agree] to display, activate, or call.
Select [No] to display, activate, or call. Select [Yes] to cancel the operation.
Displaying, activating, or calling is not available. Select [Agree] to end.
Displaying, activating, or calling is not available. Select [Yes] and select [Yes] in the
Level 3
Level 4
Warning screens other than the above may appear depending on
the contents of pattern definitions.
delete confirmation screen to delete the data. Select [No] to end without deleting.
Displaying, activating, or calling is not available. Select [Agree] to delete the data.
Displaying detected errors
In the warning screen, select [Detail] to show
error names. When no error name exists for the contents of the pattern data, [Detail] does not appear.
Up to five error names appear. [Etc] appears
below the fifth error name when six or more are detected. If same error is detected more than once, it is only listed once.
Appendix/External Devices/Troubleshooting
511
Checking the version of the pattern definitions
<Version>
In the Custom menu, select
1
[Settings]/[General settings]/ [Scanning function]/[Version].
Appendix/External Devices/Troubleshooting

Main specifications

Package
Product name FOMA SH906i
Size
Weight
Continuous talk time
Continuous stand-by time
1Seg watching time Approx. 250 min
Charge time
LCD
Image pickup device
Camera
FOMA/3G
*1, 2
GSM Voice call: Approx. 195 min
3G/GSM setting: 3G
FOMA/ 3G
3G/GSM setting:
*2, 3
AUTO
3G/GSM setting:
GSM
AUTO
Type
Size Approx. 3.0 inches
Pixels 409,920 pixels (480 × 854 dots)
Type CMO S
Size 1/3.2 inch
Effective pixels Approx. 5.2 million pixels
Recorded pixels (Max.) Approx. 4.9 million pixels
Zoom (Digital) Up to approx. 21.9×
112 (H) × 49 (W) × 18.6 (D) mm (when folded)
Approx. 135 g (with battery pack installed)
Voice call: Approx. 215 min
Videophone: Approx. 100 min
When mobile: Approx. 395 hr
When mobile: Approx. 365 hr
At rest: Approx. 565 hr
At rest: Approx. 290 hr
AC adaptor: Approx. 120 min
DC adaptor: Approx. 120 min
New Mobile ASV LCD (16,777,216 colors)
*6
*4
*4
*5
*5
512
Recording
Number of still pictures recorded
Continuous shooting of still pictures
File format for still picture
Recording time for movies
Approx. 1,000 shots (when saved into the handset)
*7
25 shots/9 shots/6 shots/4 shots
JPEG
Approx. 434 sec per recording (when saved into the handset)
Approx. 60 min per recording (when saved into microSD Card
*9
(64 MB))
File format for movie MP4
Music playback
Memory capacity
Continuous playback time
Chaku-uta
Chaku-uta full
®
®
i-motion (Compatible with background playback Approx. 985 min
Chaku-uta full® (Compatible with background playback): Approx. 910 min
WMA file (Compatible with background playback): Approx. 1,000 min
Music&Video Channel (voice) (Compatible with background playback): Approx. 985 min
Music&Video Channel (movie): Approx. 320 min
*12
Approx. 97.4 MB
*10
):
*11
*11
*13
*1 Continuous talk time is an estimate of the time when talking in a
location where the signal is normal.
*2 The above mentioned talk time and stand-by time are shortened
with the use of data communications, Multiaccess, and the camera.
*3 Continuous stand-by time is an estimate of the time when FOMA
terminal is folded and in a status where signals are received. Talk/ stand-by time may be reduced by about half depending on conditions including battery level status, functions used, temperature and other environmental conditions, and signal strength (no signal or weak signal). Using i-mode reduces talk (transmission)/stand-by time. In addition, watching 1Seg,
*8
composing i-mode mail, using Bluetooth function and activating downloaded i-appli or the i-appli stand-by will also shorten talk (transmission)/stand-by time even if calls or i-mode transmission are not made.
*4 Continuous stand-by time is the average usage time when the
FOMA terminal is folded and in At rest, When mobile or Outside the service area status.
*5 Continuous stand-by time is the average usage time when the
FOMA terminal is folded when you are not moving and in a status where signals are received.
*6 A CMOS (Complementary Metal-Oxide Semiconductor) is an
image devices equivalent to the film of silver salt cameras.
*7 Image size: QCIF (176 × 144 dots)/Image quality: NORMAL/File
size: 10 KB
*8 Image size: sQCIF (128 × 96 dots)/Image quality: NORMAL/File
size limit: For mail (long)/Type: Image + voice
*9 Image size: sQCIF (128 × 96 dots)/Image quality: NORMAL/File
size limit: Not restricted/Type: Image + voice *10 When played back with MUSIC Player *11 File format: AAC format *12 File format: WMA format *13 When Still picture, Movie, MUSIC, Melody, My Documents,
Kisekae Tool, Machi-chara, Chara-den, i-appli, e-book/
e-dictionary/e-comic, Music&Video Channel or Video is saved,
the memory capacity of Chaku-uta
®
/Chaku-uta full® will be small.
Appendix/External Devices/Troubleshooting
513
Battery pack
Product name Battery Pack SH17
Battery Lithium-ion
Nominal voltage 3.7 VDC
Nominal capacity 800 mAh
Appendix/External Devices/Troubleshooting

Number of saved/registered/protected entries in the FOMA terminal

Number of
Data type
applicable
entries to be
saved/registered
Phonebook 1,000
1Seg TVlink 100
Reception/Recording 50
*2
Schedule Schedule 300
Vacation 100
Holiday 20
*3
Text memo 10
Mail (The total number of SMS and i-mode mail)
Received mail 1,000
User folder 20
Sent mail 500
User folder 20
Unsent mail 500
*4, 5, 6
*4, 5
*5
User folder 20
Deco-mail templates 100
Decome-Anime Templates 100
Message Message R 50
Message F 50
*6
*6
*5
*5
Bookmark 100
Bookmark folder 20
Screen memo 400
Download dictionary 10
*5
*7
*1
Number of applicable
entries to be
protected
1,000
500
500
25
25
*5
400
514
Number of
Data type
applicable
entries to be
saved/registered
i-appli 100
*5
Number of applicable
entries to be
protected
Mail-type i-appli 5
Still picture 1,000
*5
User folder 20
Movie/i-motion 100
*5
User folder 20
Kisekae Tool 50
*5
User folder 20
Machi-chara 50
*5
User folder 20
Chara-den 50
*5
User folder 20
Melody 500
*5
User folder 20
PDF data 50
*5
User folder 20
ToruCa 200
*5
User folder 20
e-book/e-dictionary/e-comic 1,000
User folder 400
*1 Up to 50 entries can be saved in the FOMA card. *2 Total number of the timers for starting and recording programs. *3 Save a national holiday besides holidays already saved. *4 For SMS, up to 20 received and sent messages can be saved in
the FOMA card (nP. 228). Capacity may decrease depending on the available memory (nP. 348).
*5 *6 Pre-installed data is included. *7 Set up to five dictionaries. *8 Pre-installed folder is included.
*5, 6
*8

Specific Absorption Rate (SAR)

This model phone FOMA SH906i meets the MIC’s* technical regulation for exposure to radio waves.
The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The regulation employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit is 2 watts/ kilogram (W/kg) a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The value of the limit is equal to the international guidelines recommended by ICNIRP All phone models should be confirmed to comply with the regulation, before they are available for sale to the public. The highest SAR value for this model phone is 0.457 W/kg. It was taken by the Telecom Engineering Center (TELEC), a Registered Certification Agency on the Radio Law. The test for SAR was conducted in accordance with the MIC testing procedure using standard operating positions with the phone transmitting at its highest permitted power level in all tested frequency bands. While there may be differences between the SAR levels of various phones and at various positions, they all meet the MIC’s technical regulation. Although the SAR is determined at the highest certified power level, the actual SAR of the phone during operation can be well below the maximum value. For further information about SAR, please see the following websites:
World Health Organization (WHO) http://www.who.int/peh-emf/
ICNIRP http://www.icnirp.de/
MIC http://www.tele.soumu.go.jp/e/ele/body/index.htm
**
averaged over ten grams of tissue. The limit includes
***
.
Continued on next page
Appendix/External Devices/Troubleshooting
515
TELEC
Hereby, Sharp Telecommunications of Europe Ltd, declares that this FOMA SH906i is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity can be found at the following Internet address: http://www.sharp.co.jp/k-tai/
Declaration of Conformity
http://www.telec.or.jp/ENG/Index_e.htm
NTT DoCoMo http://www.nttdocomo.co.jp/english/product/
SHARP Corporation http://www.sharp.co.jp/products/menu/phone/cellular/sar/index.html
* Ministry of Internal Affairs and Communications
** The technical regulation is provided in Article 14-2 of the Ministry
Ordinance Regulating Radio Equipment.
***International Commission on Non-Ionizing Radiation Protection
Appendix/External Devices/Troubleshooting
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested at the ear was
0.813 W/kg
*
. As SAR is measured utilizing the devices highest transmitting power the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network. The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head.
* The tests are carried out in accordance with international
516
guidelines for testing.
FCC Notice
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset when tested for use at the ear is 0.615 W/kg and when worn on the body, as described in this user guide, is 0.442 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the back of the handset kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between the user’s body and the back of the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID APYHRO00066. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Website at http://www.phonefacts.net.

Export Control Regulations

The Japan Export Control Regulations (“Foreign Exchange and International Trade Law” and its related laws) will be applied to this product and its accessories under certain conditions. The Export Administration Regulations are also applied. To export or reexport this terminal and its accessories, conduct all legally required procedures at your own risk and expense. For details on the procedures, contact the Ministry of Economy, Trade and Industry or the US Department of Commerce.
Appendix/External Devices/Troubleshooting
517
LMEMO9
518
Loading...