-ANUALFOR
%ASY3EARCH
#ONTENTS0RECAUTIONS
#ONFIRMINGBEFORE5SE
0HONE6IDEOPHONE
0USH4ALK
0HONEBOOK
4ONE$ISPLAY,IGHT3ETTING
3AFETY3ETTINGS
#AMERA
IMODEIMOTION
ICHANNEL
-AIL
IAPPLI
/SAIFU+EITAI
4ORU#A
$ATA$ISPLAY%DIT
-ANAGEMENT
0LAY-USIC
/THER5SEFUL&UNCTIONS
.ETWORK3ERVICE
$ATA#OMMUNICATION
%NTERING#HARACTERS
!PPENDIX%XTERNAL$EVICE,INKAGE
4ROUBLESHOOTING
)NDEX1UICK-ANUAL
$O#O-O7#$-!SYSTEM
4HANKYOUFORSELECTINGTHEh&/-!0Iv
"EFOREORDURINGUSEOFTHE&/-!0IMAKESURETHATYOUREADTHISMANUALANDTHESEPARATE
MANUALSSUCHASFORTHEBATTERYPACKTHOROUGHLYSOTHATYOUCANUSETHE&/-!0ICORRECTLY
)FYOUFEELANYINCONVENIENCEINREADINGTHEMANUALCONTACTTHE$O#O-O)NFORMATION#ENTERLISTED
ONTHEBACKPAGEOFTHISMANUAL
4HE&/-!0IISDESIGNEDTOBEYOURCLOSEPARTNER
4REATITCAREFULLYATALLTIMESTOENSURELONGTERMPERFORMANCE
"EFOREUSINGYOUR&/-!PHONE
●
"ECAUSETHE&/-!PHONESUSERADIOWAVESTHEYCANNOTBEUSEDINPLACESWHERERADIOWAVESDONOTREACHSUCHAS
INSIDETUNNELSUNDERGROUNDORINBUILDINGSORTHEOUTSIDEWHERERADIOWAVESAREWEAKOROUTOFTHE&/-!SERVICEAREA
4HEYMAYNOTBEUSEDINTHEHIGHRISEBUILDINGSEVENWHENTHEANTENNASAREUNOBSTRUCTED9OUMAYALSOEXPERIENCE
INTERRUPTIONOFCALLSEVENWHENUSINGWITHOUTMOVINGWHILETHERADIOWAVESARESTRONGENOUGHFORTHETHREEANTENNASTO
APPEARONTHEDISPLAY
●
5SETHE&/-!PHONECAREFULLYTOAVOIDDISTURBINGOTHERPEOPLEWHENINPUBLICORINCROWDEDORQUIETPLACES
●
3INCETHE&/-!PHONESUSERADIOWAVESASTHEMEDIUMOFTELECOMMUNICATIONCALLSMAYBETAPPEDBYTHETHIRDPARTY
(OWEVERTHE7#$-!SYSTEMAUTOMATICALLYSUPPORTSTAPPINGPREVENTIONSOYOURCONVERSATIONWILLBEINCOMPREHENSIBLE
TOTHETHIRDPARTY
●
4HE&/-!PHONESCHANGEYOURVOICEINTODIGITALSIGNALSANDSENDTHEMTOTHEOTHERPARTY)NPLACESWHERETHERADIO
WAVESAREWEAKTHEDIGITALSIGNALSMAYNOTBECONVERTEDCORRECTLYANDINSUCHACASETHEVOICEMAYSOUNDDIFFERENTFROM
THEACTUALORIGINALVOICE
●
)TISRECOMMENDEDTHATYOUMAKESEPARATENOTESOFTHEINFORMATIONSTOREDINTHE&/-!PHONEANDKEEPSUCHNOTESINA
SAFEPLACE$O#O-OCANNOTBEHELDRESPONSIBLEINANYWAYFORTHELOSSOFDATASTOREDINTHEPHONE
●
4HEUSERHEREBYAGREESTHATTHEUSERSHALLBESOLELYRESPONSIBLEFORTHERESULTOFTHEUSEOF33,.EITHER$O#O-ONORTHE
CERTIFIERSASLISTEDHEREINMAKEANYREPRESENTATIONANDWARRANTYASFORTHESECURITYINTHEUSEOF33,)NTHEEVENTTHATTHE
USERSHALLSUSTAINDAMAGEORLOSSDUETOTHEUSEOF33,NEITHER$O#O-ONORTHECERTIFIERSSHALLBERESPONSIBLEFORANY
SUCHDAMAGEORLOSS
#ERTIFIERS6ERI3IGN*APAN++#YBERTRUST)NC'EO4RUST*APAN)NC23!3ECURITY)NC
●
●
AND3%#/-4RUST3YSTEMS#O,TD
4HIS&/-!PHONESUPPORTS&/-!0LUS!REA
4HE
&/-!PHONECANBEUSEDONLYVIATHE&/-!NETWORKPROVIDEDBY$O#O-O
&ORTHOSEWHOUSETHE&/-!PHONEFORTHEFIRSTTIME
)FTHISISTHEFIRSTTIMEFORYOUTOUSETHE&/-!PHONEREADTHISMANUALINTHEORDERASDESCRIBED
BELOW4HENYOUWILLGETACQUAINTEDWITHTHEOUTLINEOFPREPARINGANDOPERATINGPROCEDURESFOR
USINGYOUR&/-!PHONE
!TTACHANDTHENCHARGETHEBATTERYPACK 0
4URNONTHEPOWERSETTHEINITIALSETTINGSANDCHECKYOURPHONENUMBER 0
#HECKTHEKEYSONTHE&/-!PHONEFORTHEIRROLES 0
#HECKTHEMEANINGSOFICONSTHATAPPEARONTHEDISPLAY 0
,EARNHOWTOOPERATETHEMENUS 0
'ETWELLACQUAINTEDHOWTOMAKEANDRECEIVECALLS 0
9OUCANDOWNLOADTHELATESTINFORMATIONABOUTTHISMANUALFROMTHEFOLLOWING
$O#O-OWEBSITE
・5SERS-ANUAL0$&FILE$OWNLOAD
HTTPWWWNTTDOCOMOCOJPENGLISHSUPPORTMANUALINDEXHTML
※4HE52,ANDTHECONTENTOFTHEWEBSITEMIGHTBEMODIFIEDWITHOUTNOTICE
Easy Search/Contents/Precautions
How to Read/Refer to This Manual
In this manual, illustrations and symbols are used in the explanations so that you can easily understand how to
use the FOMA phone correctly.
p
In this manual, the descriptions are given with “Stand-by display” of “Display” set to “OFF”. Also,
“Notification icons” and “Desktop icons” on the desktop are all omitted.
p
Operations are described in the method of “Scroll Selection” (see page 31).
p
Displays and illustrations described in this manual are for reference. The actual ones might differ.
p
In this manual, “Osaifu-Keitai compatible i-αppli which supports the IC card function” is described as
“Osaifu-Keitai compatible i-
How to Refer to This Manual
By the following search methods, you can find pages where your desired functions and services are described:
From the Index
Search from the index when you know the names of functions or services.
From Easy Search
Search from keywords for the functions you frequently use or the functions that are convenient if you can
know any.
From the Tabs on the Cover
Search from the tabs printed on the cover.
α
ppli”.
See the next page for details.
From the Contents
Search from the contents that categorize functions.
From the Main Functions
Search from the main functions when you want to use.
From the Function List
Search from the function list.
From Quick Manual
Quick Manual gives you a clear, brief description about basic functions. You can take it when you go out.
Illustrations for keys
p
In this manual, the illustrations for keys are simplified.
Actual key
(Body color: Lamegra white)
(Body color: Hairline black)
(Body color: Wavy blue)
p
For the description of the operating procedures in this manual, see page 31.
p
Note that “FOMA P703i” is referred to as “FOMA phone” in this manual.
p
The functions which use a microSD memory card are described in this manual; however, you need to obtain a microSD
memory card separately to make these functions available. See page 316 for the microSD memory card.
p
It is prohibited to copy all or part of this manual without permission.
p
The instructions contained in this manual may be changed without notice.
P.6
P.8
P.396
P.460
Illustration in
this manual
-1
For the illustration for keys used in this manual, see
“Phone Parts and Functions” on page 24.
Easy Search/Contents/Precautions
1
How to search for “Alarm” is explained here as an example of search method.
From the Index
P.454
Search for a function or a service name as shown below.
From Easy Search
Add to a phonebook entry
Add to phonebook (Phone)
Add to phonebook (UIM)
Additional service
Additional guidance
Address link function
Alarm
Alarm setting
Answer setting
Any key answer
asf
AT command
Attach bookmarks
P.4
114
109, 114
109, 114
379
380
206
352
360
326
384
231
Go to page 352
where “Alarm”
73
73
is explained.
Search for the function you frequently use or that is convenient if you can know any as shown below.
Other things you can do
To reduce the battery consumption ...................138 <Power Saver Mode>
To scan QR codes or Bar codes .......................187 <Bar Code Reader
To use the microSD memory card..................... 316 <microSD Memory Card>
To exchange information using infrared rays ....326 <
To listen to the music......................................... 341 <SD-Audio>
To use the FOMA phone as an alarm clock......352 <Alarm>
To use the FOMA phone as a calculator...........364 <Calculator>
To bring software programs up to date.............. 442 <Software Update>
To bring security up to date ...............................446 <Scanning Function>
Infrared Data Exchange
>
>
Go to page 352
where “Alarm”
is explained.
From the Tabs on the Cover
Cover page
Search for the function you want to set in the order of “Cover” → “First page of Chapter” → “Description
page” as shown below.
IMODEIMOTION
ICHANNEL
-AIL
IAPPLI
/SAIFU+EITAI
4OR U#A
$ATA$ISPLAY%DIT
-ANAGEMENT
0LAY-USIC
/THER5SEFUL&UNCTIONS
.ETWORK3ERVICE
$ATA#OMMUNICATION
%NTERING#HARACTERS
!PPENDIX%XTERNAL$EVICE,INKAGE
4ROUBLESHOOTING
)NDEX1UICK-ANUAL
Easy Search/Contents/Precautions
2
Multiaccess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Multiaccess› 348
Multitask. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Multitask› 348
Informing You of an Incoming Call/Mail Message by Voice . . . . . . . . . . . . . .‹Reading Aloud› 349
Turning Power On/Off Automatically at a Specified Time. . . . . . . . . . . ‹Auto Power ON/OFF› 351
Using Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Alarm› 352
Using Calendar to Manage Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Schedule› 354
Using ToDo to Manage Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .‹ToDo› 358
Setting Operating Conditions of Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .‹Alarm Setting› 360
Using Your Original Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Private Menu Setting› 360
Storing Your Name, Mail Address and Other Information. . . . . . . . . . . . . . . . . ‹Own Number› 361
Recording Voice during a Call or Standby as Voice Memo
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Voice Memo during a Call› ‹Voice Memo› 361
Recording Images during a Video-phone Call as a Movie Memo. . . . . . . . . . . ‹Movie Memo› 362
Go to page 352
where “Alarm”
is explained.
Describes a function
name. You can find
this name in Index.
Describes the
menu number.
(See page 33)
+m-4-4
Alarm
Describes the
operating
procedures in each
<>
Alarm
Using Alarm
Setting at purchase OFF
You can set Alarm to alert you at the specified time
with an alarm tone, animation and illumination. You
can store up to three alarms.
m
1
step. (See page 31)
Alarm List
Describes the display at an important point in the
2
procedure. See this while referring to the display
of the FOMA phone you are using. (Values,
settings, and entered characters are for reference.)
Item Operations/Explanation
Enter the time for sounding the alarm.
(Time setting)
p
Enter the time on 24-hour basis.
p
You cannot set the same time as the time
set for the stored alarm.
Select a type of alarm tone.
(Alarm tone)
p
If you select “OFF”, the setting for the
alarm tone is completed.
You can search for
chapters from tabs.
Describes the title of
each chapter.
Select a folderSelect an alarm tone.
You can set whether to turn on the power
(Auto power
automatically to make an alarm sound when
ON)
the alarm time arrives during power off.
ON or OFF
You can set the alarm tone which sounds at
(Prefer
the specified time during Manner Mode.
manner mode)
Select an item.
Prefer manner mode
. . . Sounds at the same volume as set for
“Alarm volume”.
Prefer alarm
. . . Sounds at the volume set for this
function.
Other Useful Functions
352
Note: The page above is a sample.
Item Operations/Explanation
You can set whether to activate Snooze. If
(Snooze
you set “OFF”, set the time that the alarm
setting)
tone is to continue playing.
ON or OFF
Enter a ring time (minutes).
p
You can enter from “01” through “10” in
two digits.
Pressl().
3
Information
p
If the alarm tone sounds during a call, press any key to
stop it. Once again press any key to end the alarm
including Snooze. If the other party on the phone hangs
up, an alarm including Snooze ends.
p
When you set the power to automatically turn on and an
alarm to sound, the default alarm tone sounds if the
alarm which is affected by the UIM restrictions has been
selected.
p
Turn off the FOMA phone after setting “Auto power ON”
to “OFF” when you are near electronic devices using
high-precision control or weak signals, or where the use
is prohibited such as in airplanes and hospitals.
Function Menu of the Alarm List
Function menu
Edit
Display detail
Release this
Release all
Operations/Explanation
Go to step 2 on page 376.
You can display the detailed setting for the
alarm.
p
You can display also by selecting stored
alarm.
You can set the alarm to “OFF”.
YES
You can set all alarms to “OFF”.
YES
Describes the
options shown on
the display and
their explanations.
Describes the setting
at purchase.
The “Function List”
also lists the setting at
purchase.
(See page 396)
Describes cautions or
references required for
using each function.
Describes the operation
and supplementary
explanation for each
item.
Describes the item
names shown on the
display. (Some items
may not be available
depending on the
operation.)
Easy Search/Contents/Precautions
3
Easy Search
To check the function you want to know by easy language, refer to the following:
To know convenient functions for making calls
To/Not to notify your phone number to the other party....
To switch to a video-phone call during a voice call...
To change a volume level of the other party’s voice .....
To put a call on hold during a call........................76 <Holding>
48 <Caller ID Notification>
58 <
Switch to Video-phone Call
75 <Volume>
To do the following when you cannot answer calls
To put an incoming call on hold without answering ...
To tell that talking on the phone should be avoided...77<Public Mode (Drive Mode)>
............................................................................. 79
To record messages and images ........................80<Record Message Setting
76 <On Hold>
<Public Mode (Power Off)>
To change melody or illumination
To adjust the ring volume ....................................75 <Ring Volume>
To change ring tones according to callers......... 109 <Add to Phonebook>
To change ring tones.........................................128 <Select Ring Tone>
To know incoming calls by vibrator.................... 130 <Vibrator>
To silence the keypad sound when the key
is pressed........................................................ 131 <Keypad Sound>
To activate Manner Mode.................................. 133 <Manner Mode>
To change colors and flickering patterns of
<
Call/Charging indicator for incoming calls.......146
Illumination Setting
>
>
>
To change/know display settings
To know the meaning of icons on the display......26 <
To switch Menu displays ..........................................
To change the Stand-by display (Wallpaper) ....136 <Display Setting>
To display a calendar on the Stand-by display......
To change the character size
.......................................... (i-mode) 206, (Mail) 252 <Character size>
Display
>
35 <EASY Mode>
136 <Calendar>
To make full use of mail
To send Deco mail.............................................226 <Deco Mail>
To send images .................................................230 <Attachments>
To sort and save mail automatically ..................250 <Auto-sort>
Easy Search/Contents/Precautions
4
To make full use of camera
To change the shooting size.............................. 184 <Image Size Setting>
To save to the microSD memory card...............185
<
Storage Setting (Store In)
To display shot images......................................292 <Picture Viewer>
To use the FOMA phone with a sense of security
To lock the FOMA phone from away
when it gets lost .............................................. 159 <Omakase Lock>
To keep Phonebook entries from prying eyes ....
166 <Secret Mode>
To reject calls without a caller ID.......................169 <Call Setting without ID>
To reject calls from the phone numbers
not in the Phonebook ......................................170 <Reject Unknown>
To separately store Phonebook and other
data files in preparation for their erasure ........ 171 <Data Security Service>
※
This service is a pay service which is available on a subscription basis.
Other things you can do
To reduce the battery consumption ................... 138 <Power Saver Mode>
To scan QR codes or Bar codes .......................187 <Bar Code Reader
To use the microSD memory card.....................316 <microSD Memory Card>
To exchange information using infrared rays .... 326 <
To listen to the music.........................................341 <SD-Audio>
To use the FOMA phone as an alarm clock ......352 <Alarm>
To use the FOMA phone as a calculator...........364 <Calculator>
To bring software programs up to date.............. 442 <Software Update>
To bring security up to date ...............................446 <Scanning Function>
Infrared Data Exchange
>
※
>
>
p
The operating procedures for frequently used functions are summarized in Quick Manual. (See page 460)
Easy Search/Contents/Precautions
5
Contents
How to Read/Refer to This Manual ................................... 1
Easy Search........................................................................4
Contents.............................................................................. 6
Main Functions of FOMA P703i.........................................8
Making Full Use of FOMA P703i! .................................... 10
Confirming before Use
23
Phone/Video-phone
51
PushTalk
93
Phonebook
107
Tone/Display/Light Setting
127
Safety Settings
153
Phone Parts and Functions, Display, Method for Selecting Menu, EASY Mode,
Guide, UIM (FOMA Card), Battery, Charging, One-push Open,
Power ON/OFF, Select Language, Initial Setting, Set Time,
Caller ID Notification, Own Number, etc.
Making a Call/Video-phone Call, WORLD CALL, Switching between a Voice Call and
Video-phone Call, Call Records, Chaku-moji, Hands-free, Receiving a Call/
Video-phone Call, Answer Setting, Volume, Ring Volume, Public Mode (Drive Mode),
Public Mode (Power Off), Record Message Setting, Chara-den, etc.
What is PushTalk?, Making a PushTalk Call, Receiving a PushTalk Call,
PushTalk Phonebook, Setting PushTalk Calling/Receiving, etc.
Phonebook, Add to Phonebook (FOMA phone/UIM), Group Setting,
Search Phonebook, Two-touch Dial, Voice Dial, etc.
Select Ring Tone, Vibrator, Voice Announce, Manner Mode, Display Setting,
Private Window, Backlight, Color Pattern, Menu Icon Setting, Feel Settings,
Illumination Setting, Desktop Icon, Font, Clock Display, etc.
Passwords, Change Security Code, UIM Setting, Releasing PIN Lock, Lock All,
Self Mode, PIM Lock, Keypad Dial Lock, Secret Mode, Mail Security,
Restrictions, Call Setting without ID, Reject Unknown, etc.
Safety Precautions .......................................................... 12
Notes on Handling........................................................... 17
Intellectual Property Rights ............................................ 20
Accessories and Main Options ...................................... 22
Camera
173
i-mode/i-motion/i-channel
193
Mail
219
i-αppli
263
Easy Search/Contents/Precautions
6
Still Image Shoot, Moving Image Shoot, Settings for Shooting Images,
Setting Image Size/Image Quality, Bar Code Reader, Text Reader, etc.
What is i-mode?, iMenu, My Menu, Change i-mode Password, Bookmark,
Screen Memo, Download, i-mode Settings, Message R/F,
SSL Certificate, Client Certificate, What is i-motion?,
What is i-channel?, etc.
i-mode Mail, Deco Mail, Template, Attachments, Photo-sending,
Mail Auto-receive, Kirari Mail, Receive Option, Check New Message,
Auto-sort, Chat Mail, SMS (Short Messages), etc.
What is i-αppli?, i-αppli Download, i-αppli Run, Starting i-αppli Automatically,
i-
α
ppli Stand-by Display, Settings for when Running i-αppli, iα
ppli(microSD)
Osaifu-Keitai/ToruCa
279
Data Display/Edit/
Management
289
Play Music
333
What is Osaifu-Keitai?, What is iC Transfer Service?,
Osaifu-Keitai Compatible i-αppli, What is ToruCa?, Obtain ToruCa Files,
ToruCa Viewer, ToruCa File List/Detailed ToruCa File Display,
ToruCa Settings, IC Card Lock
About Data Box, Picture Viewer, Original Animation, i-motion Player,
Chara-den, Melody Player, microSD Memory Card, Infrared Data Exchange,
iC Communication, etc.
Playing Back Music, Downloading Chaku-uta Full®Music Files,
Chaku-uta Full® Player, SD-Audio, About SD-Jukebox
p
“Chaku-uta Full” is a registered trademark of Sony Music Entertainment Inc.
Other Useful Functions
347
Network Service
369
Data Communication
381
Entering Characters
385
Appendix/External Device
Linkage/Troubleshooting
395
Index/Quick Manual
453
Multiaccess, Multitask, Alarm, Schedule, ToDo, Private Menu Setting, Own
Number, Voice Memo, Movie Memo, Call Data, Calculator, Free Memo,
UIM Operation, Reset Settings, Initialize, etc.
Check Network Information, Voice Mail, Call Waiting, Call Forwarding,
Nuisance Call Blocking, Caller ID Request, Dual Network, English Guidance,
Service Numbers, In-call Management, Remote Access, Multi Number,
Additional Service, etc.
Available Data Communication, Before Using,
Preparation Flow for Data Communication, AT Command, About CD-ROM,
DoCoMo Keitai Datalink
Character Entry, Common Phrases, Cutting/Copying/Pasting,
Own Dictionary, Learned Words, Download Dictionary, etc.
Function List, Options and Related Equipment, Data Link Software,
Troubleshooting, Error Messages, Warranty and Maintenance Services,
i-mode Trouble Diagnosis Site, Software Update, Scanning Function,
Specifications, Export Administration Regulations, etc.
Index, Quick Manual
Easy Search/Contents/Precautions
7
Main Functions of FOMA P703i
FOMA (Freedom Of Mobile multimedia Access) is the name of the DoCoMo service based on the W-CDMA
format, authorized as one of the world’s standards for third-generation mobile telecommunication systems
(IMT-2000).
Remarkable i-mode!
i-mode is an online service that enables you to get useful information from i-mode sites (programs) or web pages supporting
i-mode by using the screen of an i-mode phone. This service also enables you to send or receive mail messages with ease.
■
i-motion Movie/i-motion MailP.214, P.230
You can obtain images and music from sites or Internet web pages to enjoy them.
Also, you can attach a moving image shot by a built-in camera or an i-motion movie obtained from sites or Internet web
pages to i-mode mail for sending.
■
Chaku-uta®/Chaku-motionP.128, P.137
You can set the stored i-motion movie as “Chaku-motion” for a ring tone or ring image.
p
“Chaku-uta” is a registered trademark of Sony Music Entertainment Inc.
◆
i-mode mail/Decomail-pictograph
P.220, P.226
Besides mail text, you can attach up to 2 Mbytes of files or
10 files (JPEG, ToruCa, etc.) in total. The FOMA phone
supports Deco mail/Decomail-pictographs and you can
change the character color, character size, and
background color of mail text, so you can compose
pleasant mail messages to send.
◆
Mega i-αppli/i-αppli DX
By downloading i-αppli programs from sites, you can enjoy
playing games or get stock price information or weather
forecasts updated automatically. As the large capacity
mega i-
α
ppli is supported, you can enjoy playing highresolution 3D games and full-length role playing games.
With i-
α
ppli DX software, you can have more fun of i-αppli
by linking with information inside the i-mode phone such
as the Phonebook entries or mail messages.
P.264
Safety Settings
◆
Omakase Lock
When you have lost the FOMA phone, you can lock the
FOMA phone and release it by contacting DoCoMo.
For inquiries, see the back page of this manual.
※
Note that Omakase Lock might be activated by an
offer from the contractor of the FOMA phone when the
contractor and the user of the FOMA phone differ.
◆
Network
p
Voice Mail Service (Charged)
・
A separate subscription is required.
p
Call Waiting Service (Charged)
・
A separate subscription is required.
p
Call Forwarding Service (Free)
・
A separate subscription is required.
Easy Search/Contents/Precautions
8
P.370
P.153
P.159
◆
Data Security Service
This service enables you to save the Phonebook entries,
still images, and mail messages to the Data Storage
Center, and restore the saved data, when you lost your
FOMA phone or in other cases, to your FOMA phone
from the Data Storage Center. Further, you can edit or
manage data held at the Data Storage Center using your
personal computer and can reflect the edited data to
your FOMA phone.
For cautions on the use of Data Security Service and
details on how to use it, refer to “Mobile Phone User’s
Guide [i-mode]”.
For inquiries, see the back page of this manual.
Data Security Service is a pay service that is available
on a subscription basis.
p
Dual Network Service (Charged)
・
A separate subscription is required.
p
Multi Number (Charged)
・
A separate subscription is required.
p
SMS (Short Messages) (Free)
・
No subscription is required.
P.171
◆
Saving Chaku-uta Full® and Chaku-uta® Music
Files to the microSD Memory Card
P.277, P.321
You can save※1 copyrighted Chaku-uta Full® and
®
Chaku-uta
the contents transfer is supported. Select “Move to
microSD” on the Function menu to move the files to the
“Movable contents” folder (or a folder specified as the
destination folder, as for Chaku-uta Full
inside the microSD memory card.
You can save
as well. For the saved files to be available on another
FOMA phone, you need to use the microSD memory card
and the UIM used when the files were saved.
※
※
◆
■
When a call comes in, just press the One-push open
button, and you can open the FOMA phone to answer the
call.
■
When a missed call or new mail message is found, just
press the One-push open button, and you can open the
FOMA phone to display the detailed Missed Call display or
Inbox List.
◆
An asymmetry design stages your frolicsome mind. Round
shape that fits firmly into your palm, and the tile keys of
cubic design that place stress on the operability enhance
the performance of your FOMA phone.
music files to the microSD memory card as
※2
i-αppli data to the microSD memory card
1 You may not be able to save some contents.
2 You may not be able to save data for some software
programs.
One-push Open
One-push Answer
Recv. Mail/Call at Open
P.44
P.71
Design That Stages Your Frolicsome Mind
P.140
®
music files)
◆
Feel Function
■
Feel＊Talk
Feel＊Talk reproduces a “Conversational” atmosphere by
animating 45 types of cartoon characters and by lighting or
flickering the Call/Charging indicator.
■
Feel＊Mail
Feel＊Mail reproduces the atmosphere of “Mail
messages” by animating 45 types of cartoon characters.
Pleasant animation appears on the Private window
according to the contents of the incoming mail message.
◆
Cute Materials and Images
Popular and cute cartoon characters “Gaspard & Lisa” and
illustrations by “CHICO HAYASAKI” who is well known and
very popular among young women are pre-installed.
◆
Deco Mail
You can change the font color, font size, or background
color of mail text and can insert Deco mail pictures or
photos taken by a built-in camera in the text so that you
can compose and send enhanced mail messages.
In addition, as Deco Mail supports templates, you can
easily compose a Deco mail message by using the format
of the received Deco mail or Deco mail downloaded from
sites
◆
A Thousand of Decomail-pictographs
P.407
A thousand of elaborately selected Decomail-pictographs
are pre-installed. Pictographs are sorted by genre into
folders so you can easily look up for the pictograph you
want to use.
P.144
P.226
P.405
◆
Multiaccess/Multitask
The FOMA phone comes with the Multiaccess function
that enables you to simultaneously use the voice phone
and i-mode (or data transmission by packet transmission).
SMS is available separately from Multiaccess. The FOMA
phone comes with also the Multitask function that enables
you to use multiple menu functions simultaneously.
P.348
◆
Camera Function
You can shoot still images and moving images using two
cameras (inside and outside cameras). In Auto Bracket
mode for continuous shooting, you can automatically shoot
nine frames in succession while changing color tone and
brightness for each frame.
With the outside camera, you can take shots of high
quality images with 1,300,000 effective pixels and
1,200,000 maximum recording pixels.
Easy Search/Contents/Precautions
P.174
9
Making Full Use of FOMA P703i!
◆
Chara-den that Conveys Your Feelings
The other party’s display Your display © Disney
◆
PushTalk
You can communicate with multiple persons (up to five persons including yourself); press the PushTalk key to access the
PushTalk Phonebook, select the persons you want to talk with, and press the PushTalk key.
P.94
Talk between two persons
Hello!
Caller
Talk while pressing
the PushTalk key
Receiver
P.83, P.310
You can show a character image instead of your own photo image
for making video-phone calls. If you set a Chara-den image as a
substitute image for a video-phone call, you can give it expressions
or movements by key operations.
Also, you can synchronize the lip of some Chara-den images with
your voice.
Talk with multiple persons
Dial
Caller
I’m coming soon.
Talk while pressing
the PushTalk key
Receiver
Receiver
Receiver
Receiver
◆
Chaku-moji
When making a voice call or video-phone call, you can send a text message to the other party during calling. You can send
the message also by selecting from the messages previously stored or sent.
◆
i-channel
You can periodically receive various pieces of information without operating by yourself. Also, you can just press the
i-channel key to show the Channel List, and obtain detailed information.
Before contract After contract
10
P.63
P.216
Easy Search/Contents/Precautions
-r
Connected
◆
ToruCa
You can obtain ToruCa files from scanning devices or sites and can easily exchange them using mail, infrared rays, or
microSD memory cards. The obtained ToruCa files are saved to “ToruCa” in “LifeKit”.
Place your Osaifu-Keitai over a scanning
device (reader/writer) to obtain a ToruCa file.
◆
Music
■
Chaku-uta Full® Player
You can play back Chaku-uta Full® music files downloaded from sites. You can read lyrics or view images stored in
Chaku-uta Full
■
SD-Audio
You can play back music files stored on the microSD memory card. By using “SD-Jukebox” contained in the provided CD-ROM and using
a personal computer, you can store music files on the microSD memory card from music CDs.
◆
Pre-installed i-αppli
■
絵もじ工房
P.282
Press the “Detail” key to view more detailed information.
P.335
®
music files, or play them back in your preferred order.
P.341
P.271
(Pictograph workshop)
You can easily create your original Decomail-pictographs. You can download pictograph
backgrounds as well.
After you select a pictograph background, you can enter your name and message to create your
own original Decomail-pictograph. You can select fonts and the color of the fonts as well.
© Panasonic Mobile Communications Co., Ltd.
■脳problem? (No problem with your brain?)
Various games show up from five fields, “計算
記憶
(Memory)
“
according to the scores you get in
© Panasonic Mobile Communications Co., Ltd.
”, “知覚 (Perception)”, and “分析
(Calculation)
(Analysis)”. The games you can select increase
チャレンジモード
”, “反応 (Response)
(Challenge mode).
Easy Search/Contents/Precautions
”,
11
Safety Precautions
■
Before using the FOMA phone, read these safety precautions carefully so that you can use it correctly.
After reading the precautions, keep them in a safe place.
■
Be sure to observe these safety precautions because they are designed to protect you or those around
you from causing injury and to avoid unnecessary damage to the property.
■
The symbols below indicate the levels of danger or damage that can be caused if the particular
precautions are not observed.
Always follow the safety precautions.
Danger
Warning
Caution
■
The following symbols show specific directions:
Denotes things not to do. (Prohibition)
Don’t
Denotes not to disassemble.
Do not
disassemble
Denotes not to touch with wet hands.
Not wet
hands
Denotes mandatory instructions (matters that must be complied with).
Do
Denotes to pull the power plug out of the outlet.
Pull the
power plug
out
■
“Safety Precautions” are divided into the following six sections:
General precautions for FOMA phone, batteries, adapters/chargers, and UIM.......................................................P.13
Precautions for FOMA phone ..................................................................................................................................P.14
Precautions for batteries..........................................................................................................................................P.15
Precautions for adapters/chargers...........................................................................................................................P.16
Precautions for UIM.................................................................................................................................................P.17
Notes on using near electronic medical equipment .................................................................................................P.17
This symbol indicates that incorrect handling will almost certainly cause death or
serious injury.
This symbol indicates that incorrect handling poses a risk of causing death or serious
injury.
This symbol indicates that incorrect handling poses a risk of causing injury or
damage to the product or property.
Denotes not to use where it could get wet
Avoid
Water
or not to wet it.
Easy Search/Contents/Precautions
12
General precautions for FOMA phone,
batteries, adapters/chargers, and UIM
Danger
Use only the batteries and adapters/
chargers approved by DoC
FOMA phone.
Do
If you use any type of battery, adapter or charger
other than the specified one, your FOMA phone,
battery or other accessories may leak, overheat,
burst, catch fire or malfunction.
Battery Pack P09
FOMA AC Adapter 01
FOMA AC Adapter 01 for Global use
FOMA DC Adapter 01
Desktop Holder P16
FOMA Dry Battery Adapter 01
FOMA USB Cable with Charge Function 01
≥
For other specified products, contact a handling
counter such as a DoCoMo shop.
oMo for your
Do not disassemble, modify or solder
the FOMA phone or accessories.
Do not
disassemble
Accidents such as fire, injury, or electric shock, or
malfunction may result. The battery may leak,
overheat, burst or catch fire.
Do not wet the FOMA phone or
accessories.
If liquids such as water or pet urine get onto them,
Avoid
Water
overheating, electric shock, fire, malfunction, injury
or others may result. Pay attention to the place of
use and the way of handling.
Do not use or leave the FOMA phone
and its accessories in places with a high
Don’t
temperature such as near fire or heater,
or places exposed to direct sunlight or
in cars under the blazing sun.
The devices could be deformed or malfunction, or
the battery may leak, overheat, burst, or catch fire,
thus resulting in the deterioration of performance
and shortening of the life of devices. Also, part of
the case could get heated, causing bare skin burns.
Warning
When you are in a place such as a gas
station where flammable gas is generated,
turn off the FOMA phone, or never do
Do
charging. Otherwise, catching fire may
result.
Ensure that you use Osaifu-Keitai with the FOMA
phone turned off when you are in the vicinity of the
gas station. (When IC Card Lock is set, turn off the
power with the lock released.)
Do not throw the FOMA phone or accessories,
or subject them to severe shocks.
Don’t
The battery may leak, overheat, burst, or catch fire.
Also, malfunction or fire may result.
Be careful not to let electroconductive
materials (metal pieces, pencil leads
Don’t
etc.) contact with the charging
terminals or connector terminal. Also,
make sure that those are not entered
into the inside of the FOMA phone.
Short-circuit could cause fire or malfunction of the
FOMA phone.
Do not place the batteries, the FOMA
phone, adapters/chargers, or UIM in
Don’t
cooking appliances such as microwave
ovens or high-pressure containers.
The battery may leak, overheat, burst, or catch fire.
The FOMA phone or the adapter/charger may
overheat, smoke, or catch fire, or its circuit parts
may become damaged.
If odor, overheat, discoloration, or
deformation is detected during use,
battery charge, or storage, immediately
Do
observe the following:
1. Pull the power plug out of the outlet or cigarette
2. Turn off the power to the FOMA phone.
3.
If you use the FOMA phone and its accessories as
they are, overheat, burst, or catching fire could
result or the battery could leak.
Caution
If children use the FOMA phone or
accessories, a guardian should explain
the safety precautions and correct
Do
operations. The guardian should also
make sure that the instructions are
followed during use.
Otherwise, injury may result.
Do not place the FOMA phone or
accessories on unstable locations
Don’t
Don’t
such as wobbly tables or slanted
locations.
The FOMA phone or accessories may fall, resulting
in injury or malfunction.
Keep out of the reach of babies and
infants.
Accidental swallowing or injury may result.
Do
Do not store in humid or dusty places,
or in high temperature environments.
Malfunction may result.
lighter socket.
Remove the battery pack from the FOMA phone.
Easy Search/Contents/Precautions
13
When you charge the battery, shoot or
play back moving images, make
video-phone calls, or use i-mode or
Do
α
ppli repeatedly or for a long time, the
itemperature of the FOMA phone,
battery pack, or adapter/charger might
rise.
If you touch the part of high temperature
consecutively, rash, itching, or eczema might be
caused depending on your physical conditions or
predisposition.
Be especially careful when you use the FOMA
phone for a long time with the adapter/charger
connected.
Precautions for FOMA phone
Warning
Turn off the FOMA phone in places
where use is prohibited such as in
airplanes and hospitals.
Do
Otherwise, electronic devices and electronic
medical appliances may be adversely affected.
If the Auto Power ON function is set, deactivate the
setting, then turn the power off.
For use inside medical facilities, make sure that you
comply with their regulations.
You may be punished for using the FOMA phone in
airplanes, which is prohibited by law.
Turn off the FOMA phone when near
electronic devices using highprecision control or weak signals.
Do
The FOMA phone may possibly cause these
devices to malfunction.
※
Electronic devices that may be affected:
Hearing aids, implanted cardiac pacemakers,
implanted defibrillators, other medical electronic
devices, fire alarms, automatic doors and other
automatically controlled devices.
If you use an implanted cardiac pacemaker,
implanted defibrillator or any other electronic
medical device, consult the manufacturer or
retailer of the device for advice regarding
possible effects from the radio waves.
If you have any implanted electronic
medical equipment, do not place your
Don’t
FOMA phone in a chest pocket or inner
pocket.
If the FOMA phone is positioned close to electronic
medical equipment, it may cause that equipment to
malfunction.
For those with weak heart conditions,
the vibrator and ring volume must be
adjusted carefully.
Do
Those functions may cause an effect on the heart.
Don’t
Don’t
Do
Don’t
Do
Do not operate the FOMA phone while
driving a vehicle.
Operating a mobile phone during drive has been
prohibited since 1st, November 2004. Park your car
in a safe place even when you are using the
Hands-Free Kit. During drive, make sure that you
activate Public Mode or the Voice Mail Service.
Do not directly point the infrared data
port at someone’s eyes during
transmission.
His/her eyes may possibly be affected. Other
infrared devices may operate erroneously if the
infrared data port is pointed at them during
transmission.
When talking with the FOMA phone set
to Hands-free, be sure to keep the
FOMA phone away from your ear.
Otherwise, your hearing could be impaired.
Do not put the FOMA phone in the place
where it could be affected by an
expanded airbag, e.g., on the dashboard.
If the airbag expands, the FOMA phone could hit
you and others, causing accidents such as injury
and the FOMA phone could malfunction and
become damaged.
If thunder starts to rumble while you are
using the FOMA phone outdoors, turn
the power off, and move to a safe place.
Otherwise, you could be struck by lightning or suffer
an electric shock.
Easy Search/Contents/Precautions
14
Caution
Itching, rash or eczema may be caused
depending on your physical conditions or
predisposition. If an abnormality occurs,
Do
stop using the FOMA phone immediately,
Metals are used for the following parts:
Where it is used Material Finishing
Charging terminals Copper alloy Gold-plated finish with
One-push open
button
Command
Navigation key
Don’t
Don’t
Don’t
Don’t
and then seek medical attention.
Plastic Chrome-plated finish with
nickel-plated ground
nickel-plated ground
Do not swing the FOMA phone by its
strap.
The FOMA phone may hit you or persons around
you, and accidents such as injury or malfunction
and damage may result.
Do not allow liquids such as water, or
foreign materials such as metal pieces
or flammable materials to get into the
UIM insertion slit or microSD memory
card slot of the FOMA phone.
Fire, electric shock or malfunction may occur.
Electronic devices in some types of
cars can be affected by use of the
FOMA phone.
Do
For safety’s sake, make sure not to use the FOMA
phone inside such cars.
Do not place magnetic cards or similar
objects near the FOMA phone or
between phone parts.
Information on magnetic cards such as cash cards,
credit cards, telephone cards and floppy disks may
be deleted.
Do not open the FOMA phone by
pressing the one-push open button
near persons around you or your face.
The FOMA phone may hit you or persons around
you, causing accidents and injuries.
Be careful not to get your finger or a
strap caught between the FOMA phone
when you close or open it.
Do
Accidents such as injury or damage may result.
Use the FeliCa reader/writer functions
in Japan only.
The FeliCa reader/writer functions on the FOMA
Do
phone have been authorized in compliance with the
radio transmission standards in Japan.
You might be imposed punishment if you use it
overseas.
Precautions for batteries
■
Check the description on the label of the battery
pack for the type of battery.
Description Type
Li-ion Lithium-ion battery
Danger
If the battery fluid gets into your eyes,
do not rub them. Flush your eyes with
clean water and get medical attention
Do
immediately.
Otherwise, the loss of eyesight may result.
Do not throw the battery into fire.
The battery may leak, overheat, burst or catch
Don’t
fire.
Do not let any metal object such as a
wire come in contact the battery
Don’t
terminals. Also do not carry or store
the battery together with any metal
objects like a necklace.
The battery may leak, overheat, burst or catch fire.
Do not pierce it with nails, hit it with a
hammer, or step on it.
Don’t
The battery may leak, overheat, burst or catch fire.
Do not use excessive force to attach
the battery to the FOMA phone even
Don’t
when you cannot attach it successfully.
Also, check that the battery is the right
way round when you attach it.
The battery may leak, overheat, burst or catch fire.
Warning
If the battery fluid comes in contact
with skin or clothes, immediately stop
using, then wash affected areas
Do
thoroughly with clean water.
Skin injury may result.
If charging is not completed at the end
of the specified charging time, stop
charging.
Do
Otherwise, the battery may leak, overheat, become
damaged or catch fire.
Immediately stop using the FOMA
phone and keep it away from fire if the
battery leaks or emits an odor
Do
The leaked battery fluid may ignite, causing fire or burst.
.
Easy Search/Contents/Precautions
15
Caution
An exhausted battery should not be
disposed of with other waste.
The battery may catch fire or damage the environment.
Don’t
After insulating the battery terminals with tape, take it to
a handling counter such as a DoCoMo shop or dispose
of it in accordance with local waste disposal regulations.
Precautions for adapters/chargers
Warning
Never short-circuit the charging
terminals when the adapter is plugged
Don’t
Not wet
hands
Don’t
Pull the
power plug
Don’t
Pull the
power plug
into the power outlet or cigarette lighter
socket. Also, never touch the charging
terminals with fingers or other bare skin.
Fire, malfunction, electric shock or injury may result.
Do not touch the power cord of the
adapter/charger, or power outlet with
wet hands.
Electric shock may result.
Do not use the AC adapter and desktop
holder in steamy places such as a
bathroom.
Electric shock may occur.
When the adapter/charger is not to be
used for a long period of time, unplug
the power cord from the outlet.
Otherwise, electric shock, fire, or malfunction may
result.
out
Do not use a damaged adapter/charger
cord or power cord.
Electric shock, overheating or fire may result.
If liquids such as water get in the
charger, unplug the power cord
immediately from the outlet or cigarette
lighter socket.
Otherwise, electric shock, smoke or fire may result.
out
When plugging the AC adapter into the
power outlet, firmly plug it in, taking care
not to contact with metal straps or the like.
Do
Otherwise, electric shock, short-circuit or fire may
result.
Use the adapter/charger at the
specified V AC.
If you use it at a wrong voltage, fire or malfunction
may result.
Do
When using the FOMA phone overseas, use FOMA
AC Adapter 01 for Global use.
AC adapter (for domestic use): 100 V AC
AC adapter (for global use): 100 to 240 V AC
[Connect only to household AC outlet]
DC adapter: 12/24 V DC
[For negative (-) grounded vehicles only]
Do
Don’t
Do
Don’t
Don’t
Pull the
power plug
out
Don’t
Do
If a fuse of the DC adapter has blown,
replace it with a specified fuse.
If you use it with a wrong fuse, fire or malfunction
may result. For the specified fuse, refer to each
instruction manual.
The DC adapter is for use only in a
negative (-) grounded vehicle. Do not
use it in a positive (+) grounded vehicle.
Fire may result.
Keep the power plugs dust-free.
Otherwise, fire may result.
Place the charger and desktop holder
on a stable location during charging.
Do not cover or wrap the charger and
desktop holder in cloth or bedding.
The FOMA phone may become separated, or the
charger and desktop holder may overheat, causing
fire or malfunction.
If it starts to thunder, do not touch the
FOMA phone and adapter/charger.
You might be struck by lighting or suffer an electric
shock.
Caution
Before cleaning, pull the plug out of the
power outlet or cigarette lighter socket.
Otherwise, electric shock may result.
Do not place heavy objects on the
adapter/charger cord and power cord.
Electric shock or fire may result.
Always hold the plug when pulling the
adapter/charger out of the power outlet
or cigarette lighter socket.
If you pull the plug out by the cord, the cord may be
damaged, which could result in electric shock or fire.
Easy Search/Contents/Precautions
16
Precautions for UIM
Caution
Be careful when removing the UIM (IC
portion).
Your hand or finger may be injured.
Do
Notes on using near electronic
medical equipment
■
The description below meets “Guidelines on the
Use of Radio-communication Equipment such as
Cellular Telephones – Safeguards for Electronic
Medical Equipment” by the Electromagnetic
Compatibility Conference Japan.
Warning
Turn off the FOMA phone in crowded
areas such as inside trains during rush
hour, as someone with an implanted
Do
cardiac pacemaker or implanted
defibrillator may be near you.
Operation of an implanted cardiac pacemaker or
implanted defibrillator can be affected by radio
waves.
Comply with the following in hospitals
or health care facilities:
p
Do
Do
Do
Do not carry the FOMA phone into operating
rooms, intensive care units (ICU) or coronary care
units (CCU).
p
Turn off the FOMA phone in hospital wards.
p
If there is any electronic medical equipment near
you, turn off the FOMA phone even when in a
location such as a lobby.
p
Comply with any regulations of hospital and
health care facilities instructing you not to use or
carry in a mobile phone.
p
If the Auto Power ON function is set, deactivate
the setting, then turn the power off.
If you use an implanted cardiac
pacemaker or implanted defibrillator,
use the mobile phone 22 cm or more
away from an implanted cardiac
pacemaker or implanted defibrillator.
Operation of an implanted cardiac pacemaker or
implanted defibrillator can be affected by radio
waves.
Patients using electronic medical
equipment other than implanted
cardiac pacemakers or implanted
defibrillators (outside medical
establishments for treatment at home,
etc.) should check the influence of
radio waves upon the equipment by
consulting its manufacturer.
Operation of electronic medical equipment can be
affected by radio waves.
Notes on Handling
General notes
■
Do not wet the equipment.
The FOMA phone, battery, adapter/charger, and UIM are
not waterproofed. Do not use them in environments,
which are high in humidity such as in bathrooms, and do
not allow them to get wet from rain. Furthermore, if
carrying them against your body, they become moist due
to perspiration and the internal parts may become
corroded, causing malfunction.
If the parts are found to have been damaged due to
exposure to the liquids, any repairs will not be covered by
warranty, or repairs may not be possible. This may be
repaired at a cost if repairs are possible.
■
Use a dry soft cloth such as the one for cleaning
glasses to clean the equipment.
p
The screen of the FOMA phone sometimes has a
special coating so that they are easier to see. If you rub
it roughly with a dry cloth, it might be scratched. Take
care of the way of handling, and use only a dry, soft
cloth such as the one for cleaning glasses. If the screen
is left with water drop or stain adhered, smear may be
generated or the coating might peel off.
p
Do not use alcohol, thinner, benzene, detergent or other
solvents for cleaning, otherwise the printing may be
removed or discoloration may result.
■
Occasionally clean the terminals of the equipment
using a dry cotton swab.
If the terminals become soiled, the connection might
deteriorate so that the power turns off or the battery does
not charge fully. Wipe the terminals with a dry cloth or
cotton swab.
■
Do not place the FOMA phone near an air
conditioner outlets.
Condensation may form due to rapid changes in
temperature, and this may corrode internal parts and
cause malfunction.
■
Do not place the FOMA phone in places where it
may be subjected to excessive pressure.
Do not place the FOMA phone in a bag along with many
other articles or in a trouser pocket, because this can
damage the LCD display and internal circuitry.
Malfunctions caused by such damage is not covered by
the warranty.
■
Do carefully read each instruction manual attached
to the battery or adapter/charger.
Easy Search/Contents/Precautions
17
Notes on handling the FOMA phone
■
Avoid using in extremely high or low temperatures.
The FOMA phone should be used within a temperature
range of 5°C to 35°C and a humidity range of 45% to 85%.
■
The FOMA phone, if operated near ordinary phones,
television sets or radios that are in use, may affect
them. You should operate your FOMA phone as far
away from such equipment as possible.
■
It is recommended that you make separate notes of
the information stored in the FOMA phone and
keep such notes in a safe place.
We take no responsibility for any loss of the stored data
items.
■
Do not sit with the FOMA phone in your trousers or
skirts pocket. Do not place the FOMA phone under
heavy objects in a bag.
Malfunction may result.
■
Make sure that nothing, such as a strap, gets
caught between the parts of the FOMA phone when
you close it.
Otherwise, malfunction or damage may result.
■
The FOMA phone becomes warm during use or
charging but this is not an abnormality.
Use the FOMA phone as it is.
■
Do not leave the FOMA phone with a camera
pointing direct to the sunlight.
Pixels may be discolored or burns may result.
Notes on handling batteries
■
Batteries have a limited life.
Though it varies depending on the usage state, you are
advised to replace the battery if its usable time is
extremely short even when you fully charge it. Make sure
that you buy the specified battery.
■
Charge the battery in a place with an appropriate
ambient temperature of 5°C to 35°C.
■
Make sure that the battery is charged when you
use the FOMA phone for the first time or have not
used it for a long period of time.
■
The usable time of the battery differs depending on
the usage environment or its remaining life.
■
Depending on how the battery pack is used, it
might swell as its operating life becomes short, but
this is not a problem.
■
Store the batteries in a well ventilated place out of
direct sunlight.
When you do not use the battery for a long time, remove
the battery from the FOMA phone with the battery power
completely drained, and store it in the polyethylene bag
used for wrapping.
Notes on handling chargers/adapters
■
Charge the battery in a place with an appropriate
ambient temperature of 5°C to 35°C.
■
Charge the battery where:
・
There is very little humidity, vibration, and dust.
・
There are no ordinary phones, television sets or radios
nearby.
■
During charging, the adapter/charger may become
warm. This is not an abnormality, so continue
charging.
■
Do not use the DC adapter for charging the battery
when the car engine is not running.
The car battery could go flat.
■
When using the power outlet having the
disengaging prevention mechanism, observe the
instructions given in that instruction manual.
■
Do not give a strong shock. Also, do not deform
the charging terminals or terminal guide.
Malfunction may result.
Notes on handling the UIM
■
Never use more force than necessary when
detaching the UIM.
■
Do not use unnecessary force when inserting it
into the phone.
■
The UIM may become warm during use, but this is
not a sign of a malfunction. Continue using it as it is.
■
The warranty does not cover damage caused by
inserting the UIM into some other types of IC card
reader/writer.
■
Always keep the IC portion clean.
■
Use a dry soft cloth such as the one for cleaning
glasses to clean the equipment.
■
It is recommended that you make separate notes of
the information stored on the UIM and keep such
notes in a safe place.
We take no responsibility for any loss of the stored data
items.
■
For the environmental protection, bring any
unneeded UIMs to a handling counter such as a
DoCoMo shop.
■
Avoid using in extremely high or low temperatures.
■
Do not damage, carelessly touch, or short-circuit
the IC.
Data might be lost or malfunction may result.
■
Do not drop the UIM or subject it to strong impacts.
Malfunction may result.
■
Do not bend the UIM or place objects on it.
Malfunction may result.
Easy Search/Contents/Precautions
18
Notes on handling the camera
■
You may be imposed punishment according to the
law and rule (such as the nuisance prevention
ordinance) if you use the FOMA phone to give a
remarkable nuisance and misdeed to the public.
Please be considerate of the privacy of
individuals around you when taking and
sending photos using camera-equipped
mobile phones.
Notes on handling the FeliCa reader/
writer
■
The FeliCa reader/writer functions on the FOMA
phone use very weak radio waves that are license
free from radio stations.
■
The FeliCa reader/writer is operated on the 13.56 MHz
frequencies. When you use another reader/writer
nearby, take enough distance between your FOMA
phone and the reader/writer. Further ensure that there
are no radio stations that are operated on the same
frequencies.
Easy Search/Contents/Precautions
19
Intellectual Property Rights
Copyrights and Rights of Portrait
You have no right to copy, modify, or distribute the contents
such as text, images, music, or software programs
downloaded from web pages on the Internet, or images shot
by the cameras of this product without permission from the
copyright holder except for when the copy or quote is for
personal use that is allowed by the copyright law.
Note that it may be prohibited to shoot or record live
performances or exhibitions even for personal use. Make
sure that you refrain from taking portraits of other persons
and distributing such portraits over the Internet without
consent, as this violates portrait rights.
Trademarks
・
“FOMA”, “mova”, “PushTalk”, “PushTalk Plus”, “KIRARI
MAIL”, “i-mode”, “i“Deco-mail”, “Chaku-motion”, “Chara-den”, “ToruCa”,
“mopera”, “mopera U”, “WORLD CALL”, “Dual Network”,
“FirstPass”, “visualnet”, “V-live”, “i-Channel”, “DCMX”, “iD”,
“Security Scan”, “i-shot”, “i-motion mail”, “i-area”, “Short
Mail”, “WORLD WING”, “Public mode”, “My DoCoMo”,
“DoPa”, “sigmarion”, “musea”, and the logos of “FOMA”,
“i-mode”, “iregistered trademarks of NTT DoCoMo, Inc.
・
Free Dial logo mark is a trademark of NTT
Communications Corporation.
・
Catch Phone (Call waiting service) is a registered
trademark of Nippon Telegraph and Telephone
Corporation.
・
NAVIDIAL and NAVIDIAL logo mark are trademarks of
NTT Communications Corporation.
α
ppli”, “i-αppliDX”, “i-motion”,
α
ppli”, “DCMX”, and “iD” are trademarks or
・
使いかたナビ® is a registered trademark of CANNAC, Inc.
・
Java and Java related trademarks and logos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and other countries.
・
IrFront® is a trademark or registered trademark of
ACCESS Co., Ltd. in Japan and other countries.
・
Powered by MascotCapsule
MascotCapsule®is a registered trademark of HI
CORPORATION
© 2007 HI CORPORATION. All Rights Reserved.
・
Microsoft, MS, and Windows are registered trademarks or
trademarks of Microsoft Corporation in the United States
and other countries.
・
The abbreviations used for respective operating systems
(Japanese version) in this manual are as shown below:
®
Windows
2000 Professional is the abbreviation of
®
Microsoft
Windows® 2000 Professional operating
system.
・
Windows® XP is the abbreviation of Microsoft® Windows
XP Professional operating system or Microsoft® Windows
XP Home Edition operating system.
・
Other company names and product names described in
the text are trademarks or registered trademarks of those
companies.
®
®
®
Easy Search/Contents/Precautions
20
Others
・
This product contains Flash
Lite™ of Adobe Systems
Incorporated.
Flash, Flash Lite and
Macromedia are trademarks or registered trademarks of
Adobe Systems Incorporated in the US and other
countries.
・
McAfee® is registered trademarks or trademarks of
McAfee, Inc. and/or its affiliates in the US and/or other
countries.
・
G-GUIDE, G-GUIDE MOBILE and their logos
are registered trademarks in Japan of U.S.
Gemstar-TV Guide International, Inc. and/or its affiliates.
・
NetFront of ACCESS CO., LTD is installed in this product
to provide Internet functionality.
NetFront is trademark or registered trademark of ACCESS
CO., LTD. in Japan and other countries.
©
Copyright
・
Powered by JBlend™ Copyright 2002-2006 Aplix
Corporation. All rights reserved.
JBlend and JBlend-related trademarks are
trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
・
・
FeliCa is a contactless IC card technology developed by
Sony Corporation. FeliCa is a registered trademark of
Sony Corporation.
・
QR code is a registered trademark of Denso Wave Inc.
・
The microSD logo is a trademark.
・
“Multitask” is a trademark of NEC Corporation.
・
Licensed by QUALCOMM Incorporated under
one or more of the following United States Patents and/or
their counterparts in other nations:
4,901,307 5,490,165 5,056,109
5,504,773 5,101,501 5,506,865
5,109,390 5,511,073 5,228,054
5,535,239 5,267,261 5,544,196
5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420
5,416,797 5,659,569 5,710,784
5,778,338
・
This product contains software licensed complying with
GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), etc.
For more details, see “readme.txt” in the “GPL
ついて
only available in Japanese version.)
・
QuickTime is a registered trademark of Apple Computer,
Inc. in the US and other countries.
・
Advanced Wnn V2 of OMRON SOFTWARE Co., Ltd. is
used for conversion methods for Japanese.
“Advanced Wnn V2”
1999-2007 All Right Reserved.
1996-2007 ACCESS CO., LTD.
is a registered trademark of FeliCa Networks, Inc.
” folder on the bundled CD-ROM. (“readme.txt” is
®
・
LGPL
©
OMRON SOFTWARE Co., LTD.
・
Some part of this product contains modules developed by
Independent JPEG Group.
・
This product contains the IrFront® technology of ACCESS
Co., Ltd. as an OBEX protocol.
・
IrFront® is a product of ACCESS Co., Ltd.
©
Copyright
・
This product contains technology of
Reallusion Inc. for the Funny Transform
function and Funny Transform
・
This product contains “Sense”, the voice analysis
technology of Alegria Corporation for Feel
・
This product is licensed under the MPEG-4 patent portfolio
license for the personal and non-commercial use of a
consumer to
(i) encode video in compliance with the MPEG-4 Visual
(ii) decode MPEG-4 Video that was encoded by a
No license is granted or implied for any other use.
Additional information may be obtained from MPEG LA,
LLC.
・
Copyright 2001 Seiko Epson Corporation.
All Rights Reserved. PRINT Image Matching
is a trademark of Seiko Epson Corporation.
The PRINT Image Matching logo is a
trademark of Seiko Epson Corporation.
・
This product is manufactured or sold under license from
InterDigital Technology Corporation.
等に
1996-2007 ACCESS Co., Ltd.
Ⅱ
function.
Standard (“MPEG-4 Video”) and/or
consumer engaged in a personal and non-commercial
activity and/or was obtained from a licensed video
provider.
＊
Talk.
Easy Search/Contents/Precautions
21
Accessories and Main Options
<Accessories>
p
FOMA P703i Handset
(With Warranty, Back Cover P14)
p
FOMA P703i CD-ROM
The PDF Versions of “Manual for Data
Communication”, “Kuten Code List”, and “SD
ディオ簡易操作ガイド
operation guide)” are included.
<Main Options>
p
FOMA AC Adapter 01
(With Warranty and
Instruction Manual)
(SD-Audio simplified
オー
p
Desktop Holder P16
(With Instruction Manual)
p
Instruction Manual
Quick Manual included (See page 460)
p
別紙 SDオーディオ簡易操作ガイド
(Separate volume of SD-Audio simplified
operation guide)
p
Battery Pack P09
(With Instruction Manual)
Other Options → See page 426
Easy Search/Contents/Precautions
22
Confirming before Use
Phone Parts and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Displaying Description of Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .‹Icons› 28
Private Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Navigation Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Method for Selecting Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using EASY Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
When You do not Remember Key Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Guide› 36
Using UIM (FOMA Card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Attaching/Removing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Charging FOMA Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Opening FOMA Phone by Using a Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹One-push Open› 44
Checking Battery Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Battery Level› 44
Turning Power On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .‹Power ON/OFF› 45
Switching to English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Select Language› 46
Executing Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Initial Setting› 46
Setting Date and Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .‹Set Time› 47
Notifying the Other Party of Your Phone Number . . . . . . . . . . . . . . . . .‹Caller ID Notification› 48
Checking Your Own Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Own Number› 49
23
Phone Parts and Functions
■
For inserting the Flat-plug Earphone/Microphone with Switch (option)
Take hold of the plug of the Flat-plug Earphone/Microphone with Switch and insert or pull it
straight into or out. Be careful not to take hold of the cover and plug together when you pull it
out.
Plug
!
"
#
p
The antenna is inside the FOMA phone.
p
Design of keys is different by the handset body color.
Illustrations above are “Lamegra white” handset.
$
%
Earpiece
･
For listening to the other party’s voice
Display
(See page 26)
Close-up lever
･
For switching the outside camera to the close-up mode
(See page 184)
l
Mail key
･
For bringing up the Mail menu (See page 240)
･
For operating the function shown at the lower left of the
display (See page 30)
<Press and hold for at least one second>
･
For checking new mail messages (See page 235)
Confirming before Use
24
m
Menu key
･
For bringing up the Main menu (See page 31)
<Press and hold for at least one second>
･
For locking the IC card (See page 288)
r
Clear/i-channel key
･
For returning to the previous operation
･
For clearing entered text or a phone number
･
For displaying the Channel List (See page 217)
d
Send/Answer key, Hands-free key
･
For making/receiving calls (See page 53 and page 70)
･
For talking with Hands-free (See page 68)
<Press and hold for at least one second>
･
For accessing a voice dial entry (See page 124)
t
Video-phone key
･
For making/receiving video-phone calls
(See page 53 and page 70)
Microphone
･
For speaking to the other party
Inside camera
･
For taking photos of yourself (See page 175)
･
For catching sight of yourself during a video-phone call
o
Command Navigation key
･
For operating functions and menus (See page 30)
i
i-mode key/i-αppli key
･
For bringing up the i-mode menu (See page 194)
･
For operating the function shown at the lower right of the
display (See page 30)
<Press and hold for at least one second>
･
For bringing up the i-αppli Software List (See page 267)
c
Camera key
･
For activating a camera in “Photo mode” (See page 179)
･
For switching the camera mode while the camera is
activated (See page 184)
<Press and hold for at least one second>
･
For activating a camera in “Movie mode” (See page 182)
h
Power/End key
･
For ending calls
･
For ending functions
･
For turning the power on (for at least one second)/For
turning the power off (for at least two seconds) (See
page 45)
Numeric keys
･
For entering phone numbers and text
ps
(for at least one second)
For activating Manner Mode (See page 133)
pa
(for at least one second)
For activating Public Mode (Drive Mode) (See page 77)
p5
(for at least one second)
For switching the backlight on/off (See page 141)
x
Multi key
･
For displaying the Multitask menu (See page 349)
<Press and hold for at least one second>
･
For switching functions, when multiple functions are
running (See page 349)
Connector terminal
･
For connecting the AC adapter (option), DC adapter
(option), or the FOMA USB Cable (option)
Outside camera
･
For taking photos of persons and/or landscapes (See
page 175)
･
For catching sight of persons and/or landscapes during
a video-phone call
Private window
(See page 28)
Call/Charging indicator
･
Flickers for incoming calls/mail and during calls.
(See page 146)
･
Lights in red during charging.
･
Lights (flickers) when you shoot with a camera.
Infrared data port
･
Used for infrared exchange and the infrared remote
controller. (See page 326 and page 330)
Strap hole
Speaker
･
Sounds for incoming calls.
･
You can hear the other party’s voice through this
speaker when Hands-free is activated. (See page 68)
Charging terminals
microSD memory card slot
･
For inserting microSD memory card (See page 317)
FeliCa mark
･
The IC card is mounted.
p
Use the IC card function placing this mark over the
scanning device (reader/writer). You cannot dismount
the IC card. (See page 281)
Back cover
(See page 41)
!p
PushTalk key
･
For making/receiving PushTalk calls (See page 95 and
page 98)
･
For bringing up the PushTalk Phonebook (See page 99)
<Press and hold for at least one second>
･
For activating “Chaku-uta Full® player” or “SD-Audio”
(See page 335 and page 341)
"<
Side upper key
･
For scrolling up page by page
#>
Side lower key
･
For scrolling down page by page
･
For using Record Message (See page 81)
･
For checking for missed calls and new mail
(See page 148)
<Press and hold for at least one second with the
FOMA phone closed>
･
For activating Manner Mode (See page 133)
$
One-push open button
(See page 44)
%
Earphone/Microphone terminal
(See page 367)
Confirming before Use
25
Display
<Private window>
(pink) Unread i-mode mail or an SMS message
(gray) The area for i-mode mail and SMS
(pink) Unread mail exists, and the area for SMS
(gray) Both the FOMA phone and UIM (FOMA
The battery level (estimate) (See page 44)
During Lock All (See page 158)
During PIM Lock (See page 160)
During Keypad Dial Lock (See page 165)
During Secret Mode or Secret Data Only
(See page 166)
During IC Card Lock (See page 288)
When both Keypad Dial Lock and PIM Lock
are activated
When both Keypad Dial Lock and Secret
Mode/Secret Data Only are activated
When both IC Card Lock and Lock All are
activated
When both IC Card Lock and PIM Lock are
activated
When both IC Card Lock and Keypad Dial
Lock are activated
When both IC Card Lock and Secret Mode/
Secret Data Only are activated
When IC Card Lock, Keypad Dial Lock, and
PIM Lock are simultaneously activated
When IC Card Lock, Keypad Dial Lock, and
Secret Mode/Secret Data Only are
simultaneously activated
While Timer Lock at Close is set
(See page 161)
exists. (See page 233 and page 260)
messages in the FOMA phone is full.
(See page 233 and page 261)
The area for SMS messages on the UIM
(FOMA card) is full.
messages on the UIM (FOMA card) is full.
card) are full.
(yellow)
Unread Messages R/F exist. (See page 208)
(gray) The area for Messages R/F in the FOMA
phone is full. (See page 208)
(pink) i-mode mail remains at the i-mode Center.
(gray) The box for i-mode mail at the i-mode
(yellow)
(gray)
(See page 235)
Center is full. (See page 233)
Messages R/F remain at the i-mode Center.
(See page 208)
The box for Messages R/F at the i-mode
Center is full. (See page 208)
i-mode mail is held at the i-mode Center
while Receive Option Setting is set to “ON”.
(See page 235)
Radio waves reception level (estimate)
Strong Weak
When out of the FOMA phone service area
or where radio waves do not reach
During Self Mode (See page 159)
During i-mode (See page 194 and page 195)
During i-mode communication
(See page 194)
During packet communication (The icon differs
depending on the communication status.)
During PushTalk communication (See page 95)
During SSL communication (See page 194)
Confirming before Use
26
p
When the date/time is set, the clock appears at the upper right of the displays other than the Stand-by display.
However, the clock does not appear when icon
■
About the contents displayed:
p
Some characters and symbols on the display and Private window might be modified or abbreviated. In addition,
the Private window is displayed in monochrome.
p
The explanations in this manual are mainly based on the settings at purchase, so the display on your FOMA
phone may not match the explanations if you have changed the settings since purchase.
p
The color liquid crystal display uses high-precision production technology. The slightest change in the
environment may result in unlit or permanently lit pixels, but this is not a manufacturing defect.
p
The color display is shown as black and white in this manual, so the actual color tone of the display looks
different.
While a microSD memory card is inserted
(See page 317)
While reading or writing data from/to
microSD memory card
While a write-protected microSD memory
card is inserted (See page 317)
When the inserted microSD memory card
cannot be used (See page 317)
While a microSD memory card is inserted,
and the FOMA USB Cable (option) is
connected in microSD Mode (See page 323)
During a voice call
During a video-phone call (64K)
During a video-phone call (32K)
During 64K data communication
During Multitask (See page 349)
While multiple functions are activated
(See page 349)
During infrared exchange (See page 326
and page 330)
While the FOMA USB Cable (option) is
connected in Communication Mode
While the FOMA USB Cable (option) is
connected in microSD Mode (See page 323)
During talking or communicating through a
USB Hands-free compatible device
(See page 69)
During connecting to a USB Hands-free
compatible device (See page 69)
During connecting to a USB Hands-free
compatible device in microSD Mode
(See page 69)
〜・
〜
〜
or is displayed.
While Vibrator is set (See page 130)
While Ring Volume is set to “Silent” or Mail/
Msg. Ring Time is set to “OFF”
(See page 75 and page 132)
During Manner Mode (See page 133)
While Remote Monitoring is set to “ON”
(See page 90)
(Does not appear on the Private window.)
During Public Mode (Drive Mode)
(See page 77)
When the call cost has exceeded the
specified limit (See page 364)
While an alarm is set (See page 353)
While Backlight is set to “OFF”
(See page 141)
While Side Keys Guard is set to “ON”
(See page 165)
While USB Mode Setting is set to “microSD
mode” (See page 323)
Voice mail messages are held at the Voice
Mail Center. (See page 370)
The number of record messages
(See page 80)
The number of video-phone record
messages (See page 80)
Confirming before Use
27
Icons
<>
+m-3-6
Displaying Description of Icons
The symbols at the top of the display (such as , , and ) are called icons. You can check the meanings
of the icons on the display.
m
1
DisplayIconsUse Mo to highlight an icon.
The description of the highlighted icon appears.
Private Window
Various information such as a clock and icon is displayed on the Private window like the following examples:
Information is displayed for about 15 seconds when you press
Clock Schedule alarm Receiving a call
During a voice call Remote monitoringDialing
■
Missed calls
When the FOMA phone is closed, “Missed call” appears on the Private window.
<
to display the missed call record. The caller’s name is displayed for the missed call coming from
Press
the party stored in the Phonebook.
When there are multiple missed calls, up to three missed call records are displayed each time you press
<
.
p
If you have received 30 or more incoming calls after a missed call, the missed call record disappears.
p
Missed call records are not displayed while a function for the Tool group (see page 348) is activated.
p
After you display a missed call record, “Missed call” disappears.
<>orp
Chaku-moji message
i-channel ticker
with the FOMA phone closed.
Confirming before Use
28
■
When a new mail message is received
When the FOMA phone is closed, a Feel＊Mail image is played back, and then “New mail” appears on the
Private window. When you press
When “Mail” on page 139 is set to “ON”, a Feel
time, sender’s address (name), and subject of the received mail are displayed. The sender’s name is
displayed for the mail coming from the party stored in the Phonebook. When “New mail” is displayed, up to
three mail messages appear each time you press
p
Press < to end the playback of the Feel＊Mail image or to clear the received date/time, sender’s address
(name), and subject of the received mail.
p
For the mail message to the box or folders with security set, Feel＊Mail images, the received date/time,
sender’s address (name), and subject are not played back/displayed.
p
When a mail message comes in while “Receiving display” is set to “Operation preferred” and a display
other than the Stand-by display is shown, “New mail” appears without showing any information.
p
When a mail message comes in during a voice call or a video-phone call, information is not displayed
even when “Receiving display” is set to “Alarm preferred”.
p
When “Secret mail display” is set to “OFF” and you receive a secret mail message in Normal Mode, a
＊
Feel
■
When i-channel is received
When “i-Channel ticker” on page 139 is set to “ON” and the FOMA phone is closed, tickers are played back
on the Private window.
p
Press
Mail image is not played back.
<>
or p to end the playback of tickers.
<
, the latest Feel＊Mail image is displayed.
＊
Mail image is played back, and then the received date/
<
.
Change Clock Display
You can change displayed contents by pressing < while clock is shown.
Time only Icons and Date/time
Information
p
The display for the schedule alarm differs according to the schedule icon you set. (See page 355)
Confirming before Use
29
Navigation Displays
When you want to execute an operation on the display, press the corresponding key as below.
■
Operation display examples and basic key assignments
Indicates the operation you can perform with the l key.
Indicates the operation you can perform with the Oo key.
Indicates the direction in which you can scroll and
select items.
Indicates the operation you can perform with the i key.
■
Operating Command Navigation key
Up
Zo
・
Moves the cursor or highlighted display up. (Press
and hold to scroll continuously.)
・
Scrolls the display while a site or mail text is
displayed.
・
Press from the Stand-by display to bring up the
Phonebook Function Selection display (Phonebook
menu).
・
Converts entered characters to katakana, kanji or
other characters. (See page 387)
Left/Received Calls
・
Moves the cursor to the left.
・
Press from the Stand-by display to bring up the
Received Call List. Press and hold for at least
one second to bring the Received Address List.
(See page 61 and page 248)
・
Scrolls back page by page.
(Press and hold to scroll continuously.)
・
Returns to the previous page while displaying a
site.
Co
OK key
Oo
・
Fixes the operation.
Right/Redial
・
Moves the cursor to the right.
・
Press from the Stand-by display to bring
up the Redial List. Press and hold for at
least one second to bring up the Sent
Address List. (See page 61 and page 248)
・
Scrolls forward page by page. (Press and
hold to scroll continuously.)
・
Moves to the next page while displaying a
site.
Down
・
Moves the cursor or highlighted display
down. (Press and hold to scroll
continuously.)
・
Scrolls the display while a site or mail text
is displayed.
・
Press from the Stand-by display to bring
up the Search Phonebook display. Press
and hold for at least one second to store a
Phonebook entry. (See page 109 and
page 116)
・
Converts entered characters to kanji,
katakana or other characters. (See
page 387)
Vo
Xo
Confirming before Use
30
Method for Selecting Menu
Pressm of the FOMA phone to bring up the Main menu so that you can execute, set, or check functions.
p
You can switch to EASY Mode from the Main menu. (See page 35)
■
Scroll Selection
The Main menu composed of nine main menu icons indicating each function is divided into four groups (Mail,
i-mode, Setting, and Tool). (See page 348)
If you select a main menu icon on the Main menu, the Sub-menu Item Selection display appears.
If you further select a sub-menu item, the Lower Sub-menu Item Selection display appears. By repeating selecting,
you can set and check the function.
■
Menu Number Selection
You can display some functions by pressing
p
The FOMA phone provides “Multitask”, where you can use a function such as a voice call, which does not belong to any of
the groups, and a function from each of the Mail group, i-mode group, Setting group and Tool group (maximum three
functions) simultaneously. (See page 348)
Scroll Selection
In this manual, the description for the command navigation key operation (selection of top, bottom, left, or right
and press of
using the following example of selecting the function “Quality alarm”:
Description Example of Steps
1
Oo
after selecting or entering a function item) is simplified. Scroll selection is explained below
Main menu icon
No tone. . . . . . . . .
High tone
Low tone
お知らせ
Sub-menu item
Items which appear on the display
TalkQuality alarmSelect an item.
Does not sound.
. . . . . . . .
High alarm sounds.
. . . . . . . .
Low alarm sounds.
m
+ the menu number. (See page 396)
Function name of lower sub-menu item
Select a main menu icon from the menu function
1
Select from the Main menu.
+m +Mo +Oo
Main menu
p
Press
+Mo
When “Menu icon setting” is set to “Basic 2”, press
icons, and press
p
Press and hold
p
If you have not touched any keys for at least 15 seconds, the Stand-by display returns.
However, when “Menu icon setting” is set to “Basic 2”, the Stand-by display does not return.
to select the icon.
+Bo
to highlight the sub-menu items or functions on each main menu icon.
+Mo
to scroll the icons continuously.
+No
on the Main menu to display the main menu
Confirming before Use
31
Select a sub-menu item from the menu function
2
Select “Talk” from “Settings”.
+Bo
p
The highlighted item is the currently selected one.
p
Press
+Xo
p
Press and hold
p
Press
3
Select “Quality alarm” from “Talk”.
p
Press
p
Press and hold
p
When the items are listed over multiple pages, the total number of pages and the current page
number are shown at the upper right of the display.
to select the item below, and
+Bo
to scroll the items continuously.
+No,.<
or .> to scroll page by page.
Select a desired lower sub-menu item (function)
+Bo
+Xo
to highlight the item below, and
+Bo
to scroll the items continuously.
+Oo
+Zo
to highlight the item above.
+Oo
+Zo
to highlight the item above.
Confirming before Use
32
Set or check the function
4
Set or check the selected function.
Some menu items have even more detailed menus.
The example below shows how to set “Low tone” for “Quality alarm”.
+Bo
p
The highlighted item is the currently selected one.
p
Press
+Xo
p
Press and hold
to highlight the item below, and
+Bo
to scroll the items continuously.
+Oo
+Zo
to highlight the item above.
Menu Number Selection
Menu Number Selection is explained below using the following example:
Description Example of Menu Number
Menunumber
<QualityAlarm>
SoundingAlarmwhenaLineisLikelytobeDisconnedted
Bring up the function using the menu number
1
From the Stand-by display, press
m75
+m -7-5
.
+m-7-5
Confirming before Use
33
■
Function Menu display
p
When “ ” appears at the lower right of the display, press
i
to bring up the Function menu. The contents of the
Function menu depend on the display from which you bring up
+i
the Function menu.
p
Selectable items such as “Save”, “Edit” or “Delete” in each
operation appear on the display.
p
When the items are listed over multiple pages, the total
number of pages and the current page number are shown at
the upper right of the display.
Description Example for Function Menu
In this manual, the operation of the Function menu is described in two methods below depending on the page:
Function menu Operation Explanation
Delete all
Enter your Terminal Security Code
YES You can delete all files.
Item displayed in the Function menu
Function menu
Delete all
Operation/Explanation
You can delete all files.
Enter your Terminal Security CodeYES
Operating procedures after selecting
an item in the Function menu
An actual operation is done as follows:
Use
+Mo
to highlight
“Delete all” and press
+Oo
().
Enter your Terminal
Security Code and press
+Oo
().
Use
+Bo
to highlight
“YES” and press
+Oo
().
Press+i().
■
To select items quickly <Direct selection>
You can select an item also by simply pressing the numeric key corresponding to
the displayed item number.
Item number
■
Item scroll
When menu items are listed over multiple pages, press Bo with the uppermost/lowermost item highlighted to show the
No
previous/next page. You can press
■
Check box
or <>to scroll through page by page.
With the functions you can select multiple items, put a check mark for check boxes to select
Oo
(),
“”
and
“”
them. Each time you press
With some functions, you can put or clear check marks at a time by pressing
switches.
i()
and selecting “Select all/Release all”.
p
“”
is placed to the selected item depending on the function.
Confirming before Use
34
■
To finish or cancel the menu operation
p
To finish the menu operation
When you finish setting function, the selection display for the lower sub-menu item comes up (or the Stand-by display
returns in some cases). When you finish setting the function, press
display returns (except during Multitask).
p
To cancel the menu operation
Press
h
display returns. Depending on the setting item, the confirmation display appears asking whether to abandon the setting
contents.
In addition, you can press
■
When the “YES/NO” selection display appears
p
When the “YES/NO” selection display appears
to cancel setting midway. The contents of the setting are abandoned and the Stand-by display or the former
r
to return to the previous operation.
1.
Press Bo to highlight “YES” or “NO”.
2.Press Oo().
For Reset settings
h
. This ends the menu operation and the Stand-by
Using EASY Mode
“EASY Mode” is a mode that has enhanced the operability with fewer operation steps than those on Normal
Mode.
p
Basic functions are focused on to appear in the display.
p
Pressl( ) to switch to Normal Mode for using detailed functions.
p
In this manual, the operating procedures are given only in Normal Mode. For how to operate in EASY Mode, see the
respective pages of each function.
Switch to EASY Mode
You can switch between Normal Mode and EASY Mode from the Main menu.
From the Stand-by display,
press
m
.
+l
Main menu in
Normal Mode
※
Select “YES” to set “Character size” of “i-mode settings” and “Mail settings” to “Large”. Even when you release EASY
Mode, either of the settings does not return. When “Large” has already been set, the confirmation display does not appear.
※
+l
Main menu in
EASY Mode
Confirming before Use
35
Configuration of EASY Mode
Phone Mail i-mode
Camera Tools Settings
Guide
<>
When You do not Remember Key Operation
You can search for the functions you want to know and use, and then check the operating methods.
You can execute some functions from “
使いかたナビ
(Guide)”. This function is available in Japanese Mode only.
m
1
使いかたナビ
Select a search method if you select “
2
文字入力キーワード検索
索引検索
(From index)
機能一覧検索
p
Highlight each item and press l( ); then the detailed operating methods are displayed.
If you highlight “
検索
(From your words)” or “
使いかたナビ
基本の操作
おすすめ機能
. . . . . . . . . . . . . . . . . . . . . . . . . . . .Displays the recommendable functions. Go to step 4.
機能検索
ボイス検索
検索履歴
p
Highlight each item and press l( ); then the detailed operating methods are
(Guide) display
(From Function List)
文字入力キーワード検索
displayed.
p
If you delete the icon pasted by default and want to re-paste it, press i() from
the display on the left and select “
(From your words)
. . . . . . . . . . . . . . . . . . . . . Retrieves functions with Japanese syllabic order. Press l or
(Guide)Select an item.
(Basic operations)
(Recommendable functions)
(Function search)
(Search by voice)
(Search history)
. . . Enter a keyword and retrieve. Go to step 3.
. . . . . . . . . . . Retrieves from the function list. Go to step 4.
(From your words)” and press l( ), select “
文字入力のしかた
. . .Displays the basic functions. Go to step 4.
. . . . .Searches for a function.
. . . Searches by vocalizing a keyword. Go to step 2 on
page 37.
. . . . . .Displays up to 30 search histories. Go to step 4.
デスクトップ貼付
機能検索
i
to display the preceding or following row. Go to step 4.
(How to input words)”.
(Function search)” in step 1.
Enter a keyword.
3
Up to 50 search results are displayed.
p
You can enter up to 24 full-pitch or 48 half-pitch characters.
Confirming before Use
36
(Add desktop icon)”. (See page 150)
文字入力キーワード
Select a functionSelect an item.
4
機能の説明
操作のしかた
この機能を使う
関連機能
p
p
p
p
(Description)
(How to operate)
(Relevant function)
For some functions, press Oo( ) several times for selection.
If you select “
function is selected. Press
You can display explanations about the function also by pressing l( ) while highlighting the function.
To delete search history, press i( ) and select “1
“YES”.
基本の操作
. . . . . . . . . . . Displays explanations for the function.
(Operate function)
. . . . . . Displays the operating method.
. . . Executes the function. Operate each function.
. . . . . . . Displays up to 10 relevant functions. Repeat step 4.
(Basic operations)” in step 1, the description about the function is displayed when that
l
( ) to execute the function.
件削除
(Delete this)” or “
全削除
(Delete all)”, then select
Search by Voice
You can search for a function by vocalizing a keyword. Set “Search by voice” of “Read aloud settings” to “ON”
to hear voice guidance for operations.
使いかたナビ
1
p
You can display the detailed operating methods by pressing l( ) and selecting “
voice)” or “
(Guide) displayボイス検索
音声入力のしかた
(How to input voice)”.
(Search by voice)
ボイス検索
Vocalize a keyword when the voice recognition start tone sounds.
2
Start vocalizing the keyword within four seconds after the voice recognition start tone sounds.
Up to nine detected results are displayed.
p
You cannot change the sound volume of the voice recognition start tone. It does not sound during Manner Mode.
p
The keywords you can input by voice are limited to the ones that have been pre-installed to the FOMA phone. If the
vocalized keyword is not recognized easily, vocalize a different word.
p
See page 124 for voice input.
Select a detected resultSelect an item.
3
このキーワードで検索
キーワードの追加
(Search from this)
(Add keywords)
. . . .Retrieves with the keyword you have selected. Up to 50 searched
results are displayed. Go to step 4 on page 37.
. . . . . . . . .Add a new keyword. Repeat step 2 and step 3.
(Search by
Confirming before Use
37
Using UIM (FOMA Card)
1
2
3
The UIM is an IC card that holds your information such as phone numbers. It can hold data such as Phonebook
entries and SMS messages as well. By sharing a UIM, you can operate multiple FOMA phones for multiple
purposes.
You cannot use the FOMA phone for communication such as voice and video-phone calls, i-mode, sending/
receiving mail, or packet communication unless the UIM is inserted.
For details on how to use the UIM, refer to the UIM instruction manual.
When inserting or removing the UIM, take care not to accidentally touch or scratch the IC.
Insert/Remove UIM
You need to remove the battery before you insert the UIM. (See page 41)
■
Inserting
Pull the claw to pull the tray
out.
p
Pull out the tray straight until it
clicks.
■
Removing
Follow step 1 of “Inserting” to pull out
1
the tray and remove the UIM.
Claw
Place the UIM on the tray
with its IC-side facing up.
p
Fit the cut corners of the UIM
and tray in place.
Cut
IC-side is faced up
■
If the tray is disengaged
Push the tray inwards.
p
Push the tray inwards firmly
until it is fixed.
Fit and push it straight into
the guide rail.
Information
p
Make sure that you insert/remove the UIM with the FOMA phone closed and held in your hand after you turn off the power.
p
Take care not to force the UIM into place because this can break it. And take care not to force the tray into place because
it can brake the tray and the guide rail.
p
Take care not to lose the UIM once you remove it.
p
When you replace your UIM (except during Omakase Lock), you need to enter the four- to eight-digit Terminal Security
Code after turning on the power. When you enter the correct Terminal Security Code, the Stand-by display appears. If you
enter the incorrect Terminal Security Code five times in succession, the power turns off. (However, you can turn on the
power again.)
Confirming before Use
38
About Password of UIM
You can set two passwords, PIN1 and PIN2, for a UIM. (See page 155)
UIM Restrictions
The FOMA phone has the UIM restriction function as a security function to protect your data and files.
If you obtain data and files by the method below with the UIM inserted, UIM restrictions are automatically set to
them.
・
When downloading images or melodies and so on, from sites or Internet web pages
・
When receiving i-mode mail with file attachments
・
When saving templates
The data or files with the UIM restrictions can be browsed, played back, started, edited, attached to mail, or
transferred via infrared rays only when the UIM used for obtaining is inserted.
When the UIM used for obtaining the data or files is not inserted, or when another UIM is inserted, these
functions are not operable.
p
In the explanation hereafter, the UIM used to obtain data and files is referred to as “your UIM” and other UIMs as
“another person’s UIM”.
♪
♪
♪
♪
♪
If the UIM used for obtaining the
data or mail messages is inserted,
you can browse or play back UIMrestricted data.
p
When the UIM is not inserted or when another person’s UIM is inserted, the following types of data and files are displayed
with the restrictions symbol, “ ”:
・
Video-phone record messages or movie memos
・
Melodies, images, i-motion movies, i-αppli, or Chara-den images downloaded or obtained from sites or Internet web pages
・
Downloaded dictionaries
・
Templates
・
Screen memos containing melodies, images, i-motion movies, Chara-den images, downloaded dictionaries or ToruCa files
・
Files (melodies, images, Chara-den pictures, or Chara-den movies) attached or pasted to i-mode mail in the Inbox
・
Files (melodies, images, i-motion movies, Chara-den pictures, or Chara-den movies) attached to i-mode mail in the Outbox,
or Draft, except the data shot or edited with the FOMA phone
・
Messages R/F with files (melodies or images) attached or pasted
・
Images inserted into Deco mail text
※
This function applies to the pre-installed i-αppli and Chara-den images if they are reinstalled (upgraded) from a site.
p
The data set with the UIM restrictions appear on the preview display as shown on the right.
Replacing UIMs
Your UIM
Another person’s
UIM
♪
♪
♪
♪
♪
Unless the UIM used for obtaining
the data or mail messages is
inserted, you cannot browse or play
back UIM-restricted data.
Confirming before Use
39
Information
p
When the UIM restrictions are set for data and files, you cannot set those data and files for the functions such as “Display
setting” and “Select ring tone” when another person’s UIM is inserted instead.
p
If you have set the data and files with the UIM restrictions for the functions such as “Display setting” and “Select ring tone”,
these will work with their default settings if you remove your UIM or insert another person’s UIM. If you insert your UIM
again, then your settings will be enabled again.
p
UIM restrictions are not set for the data received using the infrared exchange function or data transmission (OBEX)
function or the still images/moving images shot or edited with the FOMA phone.
p
Even when another person’s UIM is inserted, data and files set with the UIM restrictions can be moved or deleted.
p
You cannot start the i-αppli program set with the UIM restrictions even if you select the highlighted text from the detailed
mail display unless the UIM that was inserted at download is inserted.
p
The settings of the following functions are stored on the UIM:
・
SMS validity period
・
Validating/Invalidating DoCoMo Certificate 1 and user certificate・PIN1 code, PIN2 code・PIN1 code entry set
・
SMS center selection
・
Select language
Differences of UIM (FOMA Card)
If you use the blue UIM with your FOMA phone, note that following specifications differ from those of the green/
white UIM:
Functions
Number of digits of the phone number that can be stored in the
UIM Phonebook
Operation of user certificate to use FirstPass Cannot be used Can be used P.211
Use of WORLD WING Cannot be used Can be used
Use of Service Numbers for “DoCoMo repair counter” and
“General inquiries <DoCoMo Information Center>”
■
WORLD WING
WORLD WING is the DoCoMo FOMA international roaming service that enables you to make or receive calls overseas with
the same phone number as is by mounting the UIM (green/white) on a FOMA phone or native mobile phone (W-CDMA or
GSM system) that supports the service.
p
You do not need to subscribe to WORLD WING if you have subscribed to the FOMA service after September 1, 2005. If
you have offered that you do not need WORLD WING at the time you signed up for the FOMA service, or when you have
midway cancelled WORLD WING, you are required to take the procedures to newly subscribe to WORLD WING.
p
If you have signed up for the FOMA service before August 31, 2005, and have not yet subscribed to WORLD WING, you
are required to subscribe to it.
p
This service is not available with some billing plans.
p
If you lose your UIM (green/white) or have it stolen overseas, immediately contact DoCoMo to take the steps necessary
for suspending the use of the UIM. For inquiries, see “DoCoMo Information Center” on the back page of this manual. Note
that you are still charged the call and communication fees incurred after you lose it or have it stolen.
UIM
(blue)
20 max. 26 max. P.110
Cannot be used Can be used P.377
UIM
(green/white)
Reference
L
Confirming before Use
40
Attaching/Removing Batteries
2
Use the FOMA phone’s dedicated Battery Pack P09.
■
Attaching
While pressing the “ ”
1
part, slide the back cover
(2 mm or more) in the
direction of the arrow to
unlock.
■
Removing
While pressing the “ ”
1
part, slide the back cover
(2 mm or more) in the
direction of the arrow to
unlock.
Insert the battery pack in the
2
direction A with the arrow
mark facing up and push it in
the direction B.
p
Securely fit the claws of the
battery pack into the grooves of
the phone.
Arrow mark
Take hold of the projection
of the battery pack to lift it
up.
Slide the back cover in the
3
direction of the arrow and
attach it in place.
Projection
Information
p
Make sure that you attach/remove the battery with the FOMA phone closed and held steadily in your hand after you turn
off the power. Also, make sure not to press one-push open button when you attach/remove the battery.
p
Make sure that the tray for the UIM is not drawn out when attaching the battery. If the tray is drawn out, the battery cannot
be attached. Note that if the battery is forcibly attached, the UIM or tray may be damaged.
p
If you try to force the battery into place, you could damage the charging terminals of the FOMA phone.
p
For details, refer to the instruction manual for Battery Pack P09.
p
Do not peel off the black seal pasted onto the back of the back cover. If you peel it off, you might not be able to read and
write the IC card.
Confirming before Use
41
Charging FOMA Phone
Use the FOMA phone’s dedicated Battery Pack P09.
Life of battery pack
p
Battery packs are consumables. The usable time shortens slightly each time they are charged.
p
When the usable time of the battery pack becomes half the time it was purchased, replacing is recommended because the
battery pack is nearing the end of its life. Depending on the use conditions, the battery pack may swell as it nears the end of
its life, but this is not a problem.
The life of the battery pack is about one year. However, it may shorten if you repeat charging and discharging in a short
period of time, charge in hot environments, or charge continuously over a long period of time.
For environmental protection, bring the exhausted battery to an NTT DoCoMo, dealer, or recycle
shop.
Charging
p
For details, refer to the instruction manuals for the FOMA AC Adapter 01 (option), FOMA AC Adapter 01 for Global use
(option), and FOMA DC Adapter 01 (option).
p
The FOMA AC Adapter 01 uses 100 V AC only.
p
Even during charging, you can still answer calls if the FOMA phone is turned on. This will consume the charged amount so
that charging will take longer. Also, the standby time or talk time might be shorter if you charge the battery with your FOMA
phone open.
p
If you have a long time video-phone call during charging, the temperature inside the FOMA phone may rise and charging
may be suspended. In such a case, wait for a while and try charging again.
p
Remove and insert the connector slowly and carefully, without using unnecessary force.
p
Do not remove the battery during charging.
Do not charge for long periods of time (several days) with the FOMA phone turned on.
p
If you leave the FOMA phone powered on for long periods of time during charging, you may not be able to use the FOMA
phone for long duration as expected and low battery alarm may sound soon, because the FOMA phone will receive the
power from the battery after charging is completed. If this happens, charge the battery correctly. When charging the battery
again, first remove the FOMA phone from the AC adapter (or desktop holder) or DC adapter and then set it again.
Estimated usable time for battery
remaining life of the battery.)
Continuous
standby time
※
The continuous talk time is the estimated time that the FOMA phone can be used for calls when radio waves can be sent and
received normally.
※
The continuous standby time is the estimated time when radio waves can be received normally. The standby time could be about
half of this estimate depending on the battery level, function settings, other ambient conditions such as temperature, and the status
of radio waves in the area (weak or no radio waves, for instance). When you use i-mode communication, the talk/communication
time and standby time will be shorter. Further, even if you do not make calls or not execute i-mode communication, the talk/
communication time and standby time will be shorter if you compose i-mode mail, start up a downloaded iStand-by display, execute data communication or Multiaccess, use a camera, or play back music.
※
The continuous talk time and the continuous standby time may be shortened depending on the network environment in
your country of stay.
※
The continuous standby time for standstill is the average number of hours you can use the FOMA phone in standstill status
when it is closed and can receive radio waves normally.
※
The continuous standby time for in motion is the average number of hours you can use the FOMA phone in the combined
status of “standstill” “moving” and “out of the service area” when it is closed, in an area where it can receive radio waves
normally.
Standstill . . . Approx. 640 hours
In motion . . . Approx. 420 hours
(The usable time for the battery varies with the charging time and the
Continuous
talk time
Voice call. . . . . . . . . . Approx. 190 minutes
Video-phone call. . . . Approx. 130 minutes
Estimated time for charging battery
AC adapter Approx. 140 minutes DC adapter Approx. 140 minutes
※
The charging time is an estimate of time for when empty battery is charged with the FOMA phone turned off. The charging
time will be longer if you charge the battery with the power of the FOMA phone turned on.
Li-ion
α
ppli or the i-αppli
Confirming before Use
42
Charge with AC Adapter and Desktop Holder
Connect the AC adapter (option) to the desktop
1
holder (option).
The Call/Charging indicator
B
Insert the AC adapter’s plug into a power
2
socket.
Put the bottom of the FOMA phone into the
3
stopper of the desktop holder (A) to align the
head with the lock claw, and then depress the
FOMA phone until it clicks (B).
Check that the Call/Charging indicator lights in red.
When the Call/Charging indicator flickers, dismount the AC adapter and
battery pack from the FOMA phone and then re-mount them for charging.
If the symptom persists, troubles with the AC adapter, desktop holder or
battery pack may be involved, so consult a handling counter such as a
DoCoMo shop.
p
The charging confirmation tone (see page 131) sounds when charging
starts and ends. However, it does not sound when the power is off or
during Manner Mode or Public Mode (Drive Mode).
p
Be sure to set the FOMA phone firmly onto the desktop holder. Also, be
careful that the connector cap or a commercial strap is not caught
between the FOMA phone and desktop holder.
p
Charging can be done even when the FOMA phone is open.
When charging is completed, hold the desktop
4
holder and lift up the FOMA phone to remove.
p
Unplug the AC adapter from the power socket when you are not going
to use it for a long time.
■
Indicator and display during charging and when charging is completed
Call/Charging indicator
Charging Lights in red Blinks
Charging completed
p
When the FOMA phone is turned off, “ ” does not appear.
If you start charging with the battery flat, the Call/Charging indicator might not
light immediately; however, charging itself has started.
※
The light of the Call/Charging indicator glows slowly bright or dark, and wavers.
Lights in green
(Only once)
※
“” display
Lights
Lock claw
Stopper
Power socket
100 V AC
■
Charge with the AC adapter only
Insert the connector with the engraved
surface facing up until it clicks. Pull
straight the connector out while pressing
the release buttons.
Release buttons
※
Check the facing direction (front or rear)
of the AC adapter plug and then insert
or pull it horizontally into or from the
FOMA phone.
Malfunction could result if you try to pull
it forcibly.
A
Desktop Holder P16
Plug in horizontally with
engraved side facing down
FOMA AC Adapter 01
Connector
AC Adapter’s
plug
Engraved surface
■
DC adapter (option)
With the DC adapter, you can use a cigarette lighter socket (12 V/24 V) of cars to charge the FOMA phone with the
battery pack attached.
For details, refer to the instruction manual for the FOMA DC Adapter 01.
Information
p
If the fuse blows off when charging with the DC adapter, be sure to use a 2A fuse. The 2A fuse is consumables, so
purchase at auto parts stores in your neighborhood.
Confirming before Use
43
One-push Open
<>
Opening FOMA Phone by Using a Button
You can open the FOMA phone easily by pressing the button. You can open it also manually without using the
button.
Press the one-push open button.
1
The FOMA phone opens up.
Information
p
The FOMA phone might not open fully, depending on its direction.
p
When you open the FOMA phone by pressing the button, be careful not to drop it by its rebound.
p
You need to close the FOMA phone manually. If it does not close, open it fully and then close it.
Battery Level
<>
Checking Battery Level
When the FOMA phone is turned on, an estimate of the battery level is indicated by the icon.
・
Almost full. . . . . . . . . . . . (green)
・
Getting low . . . . . . . . . . . (green)
・
Almost empty . . . . . . . . . (red)
p
Charge the battery when it is almost empty.
Check by Display and Tone
You can check an estimate of the battery level by the display and sound.
m
1
44
Almost full Getting low Almost empty
p
The pictograph disappears after about three seconds.
p
The battery tone does not sound while “Manner mode”, “Super silent”, or “Original” is activated, or “Keypad sound”
is set to “OFF”.
Confirming before Use
Other settingsBattery level
Three beeps Two beeps One beep
※
Almost empty.
Charge the battery.
+m-7-1
■
When the battery is running out
Recharge Battery display
Power ON/OFF
<>
The display on the left appears and the low battery alarm sounds for about 10 seconds. To stop
this alarm, press any key other than
turned off.
p
During a call, a beeping tone from the earpiece notify you of the empty battery. About 20
seconds later your call will be cut and then one minute later the FOMA phone will be turned off.
p
The battery tone from the speaker does not sound while “Manner mode” or “Super silent” is
activated, or “LVA tone” is set to “OFF” in “Original”.
Turning Power On/Off
Turn Power On
Press and hold
1
Stand-by display
h
for at least one second.
After the Wake-up display (see page 137) is displayed, the Stand-by display appears.
p
If you have stored many Phonebook entries or mail messages, it may take a while for the
display to appear.
p
If Set Time is set, the current date and time are shown.
p
When “ ” is displayed, the FOMA phone is out of the service area or in the place
where the radio waves do not reach. Move to a location where “ ” disappears.
p
If “Starting system Wait a minute” is displayed, wait for a while and then proceed.
<
and >. About one minute later, the FOMA phone will be
■
When your UIM is replaced (except during Omakase Lock)
Enter the four- to eight-digit Terminal Security Code after turning on the power. When you enter the correct Terminal
Security Code, the Stand-by display appears.
If you enter the incorrect Terminal Security Code five times in succession, the power turns off. (However, you can turn on
the power again.)
■
When “PIN1 code entry set” of “UIM setting” is set to “ON”
Enter the four- to eight-digit PIN1 code after you turn on the power. When the correct PIN1 code is entered, the Stand-by
display appears. See page 155 for PIN1 code.
■
When “Auto reset setting” of “Notice call cost” is set to “ON” (except during Omakase Lock)
Enter the four- to eight-digit PIN2 code after you turn on the power. When the correct PIN2 code is entered, the Stand-by
display appears. If you press
the Stand-by display appears. See page 155 for PIN2 code.
Information
p
Each entry display appears in the order of “PIN1 code” → “Terminal Security Code” → “PIN2 code”.
r
or h without entering the correct PIN2 code, “Auto reset setting” is set to “OFF” and
Turn Power Off
Press and hold
1
The exit display appears and the power turns off.
p
You cannot turn on the power immediately after turning off the power. Wait a few seconds.
h
for at least two seconds.
Confirming before Use
45
Select Language
<>
Switching to English
Setting at purchase Japanese
+m-1-5
m
1
Japanese (
p
The following functions are different between Japanese display and English display:
Information
p
When the UIM is inserted, the “
Initial Setting
<>
ディスプレイ
日本語
Functions Japanese English
“Display” of Clock Display
Info Notice Setting
使いかたナビ
Voice Guidance Available Not available
バイリンガル
(Display)バイリンガル
) or English (英語)
日本語
(Japanese)
英語
(English)
OFF
電子音
(Electrical tone)
ボイス
(Voice)
OFF
(Guide)
(Select language)” setting is stored on the UIM.
Available Not available
Not available
Not available
(Select language)
ON
OFF
ON
OFF
Executing Initial Settings
If the date and time, Terminal Security Code, Keypad Sound, or Caller ID Setting is not set, the Initial Setting display
appears when the power is turned on. You can set the initial settings also from each menu function separately. If you
have never executed Software Update, you can do it in succession.
Turn on the powerYES
1
p
When the display for entering your Terminal Security Code, PIN 1 code, or PIN 2 code
appears, follow the operation on page 45.
Set the date and time.
2
You can select “Automatic” or “Manual” for setting the time. (See page 47)
Set your Terminal Security Code.
3
You can set your Terminal Security Code required for setting functions. (See page 154)
1. Enter “0000”
Enter your new Terminal Security Code (four to eight digits)YES
Set Keypad Sound.
4
You can set the keypad whether to make a sound. (See page 131)
1. ON or OFF
Set Caller ID Setting.
5
You can set whether to notify your phone number when making a PushTalk call. (See page 104)
YESExecute Software Update.
6
The FOMA phone checks if Software Update is needed, and if needed, it is performed. (See page 442)
Confirming before Use
46
Information
p
When an unset function is found, the Initial Setting display for an unset function or the confirmation display asking whether
to update software programs appears, each time you turn on the power.
p
The completed settings are valid even when Initial Setting is interrupted by an incoming call or canceled by pressing
r
midway.
or
p
When the power is automatically turned on by alarm notification, the Initial Setting display does not appear even if there is
any unset function.
h
Set Time
<>
+m-3-1
Setting Date and Time
Setting at purchase Automatic
You can select whether to correct the time automatically or set it manually.
m
1
Automatic
Manual
. . . . . .Sets the date/time manually.
p
When “Notice call cost” is set to “ON”, the display for entering your Terminal Security Code appears. Enter your
Terminal Security Code.
Enter year, month, date and time.
2
■
About date/time correction function
The time displayed on the FOMA phone is corrected according to the clock information obtained from the network.
The time is corrected when you turn on the power, etc. If you want to set the time with a lag, set the time manually.
p
Some few second errors might occur. You might not be able to correct the time depending on the radio wave conditions,
or the i-
α
ppli program set for the i-αppli Stand-by display.
Information
p
You can set the clock also during a call.
p
You cannot use the following functions unless the clock is set:
・
Storing date/time of Redial/Dialed Calls/Received Calls (see page 60)
・
Storing recording date/time of Record Message and Voice Memo (see page 82)
・
Storing recording date/time of Video-phone Record Message and Movie Memo (see page 82)
・
Calendar (see page 136)
・
Schedule (see page 354)
・
Software Update (see page 442)
・
Pattern data update of Scanning Function (see page 447)
・
Function menu “Input time” while entering characters (see page 389)・Auto Power ON/OFF (see page 351)
・
Function menu “Shooting date” of the Finder display (see page 185)
p
The FOMA phone has an internal backup battery. The set time is stored in the internal backup battery so is kept even
when you change the battery. However, the time could be reset if the battery is detached for two or more weeks. In this
case, charge the FOMA phone and then set the clock again. Also, when using the FOMA phone for the first time after
purchase, attach the battery to the FOMA phone and then charge it. This charges the internal backup battery as well.
p
This function supports clock settings from 00:00 on January 1, 2006 through 23:59 on December 31, 2037.
ClockSet timeAutomatic or Manual
. . .Corrects the date/time automatically. The setting is completed.
If the time is not automatically corrected such as when “ ” is displayed and the date/time has not been
set, the display for manually correcting the time appears. Follow step 2 to set the date/time. However, the
display for manually correcting the time does not appear when you set the date/time by Initial Setting.
UseMo to move the cursor and enter numbers by the numeric keys.
p
Enter the A.D. year.
p
Enter the time on the 24-hour basis.
p
To enter one-digit numeral for the date and time, enter two digits beginning with “0” as in
“01” through “09”.
・
Alarm (see page 352)
・
ToDo (see page 358)
・
i-αppli Auto Start (see page 275)
・
Auto Reset Setting of Notice Call Cost (see page 364)
Confirming before Use
47
Caller ID Notification
<>
Notifying the Other Party of Your Phone Number
You can set the FOMA phone to send your phone number to the called party’s phone when dialing. Your phone
number is important information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone is the digital terminal such as the FOMA phone or
mobile phone which supports Caller ID.
Set Caller ID Notification to Network
You can set whether to notify your caller ID on the network.
m
Caller ID notificationDo the following operations.
+m-1-7
1
Item Operation Explanation
Activate
Check setting
Set Caller ID Notification when Making a Call
Each time you dial out, you can set whether to notify your caller ID.
Enter a phone number
1
or
bring up the detailed display of a Phonebook entry, redial item, dialed call
record, or received call record.
i
()Notify caller IDDon’t notify or Notify caller (OFF or ON)
2
p
When you release “Notify caller ID”, select “Cancel prefix”. For voice calls or video-phone calls, follow the settings in
“Activate” of “Caller ID notification”. For PushTalk calls, follow the settings in “Caller ID setting” on page 104.
You can select whether to notify the other party of your phone number also by entering “186”/“184” before the
party’s phone number.
■
To notify your caller ID
Destination phone number
186 + +
■
Not to notify your caller ID
Destination phone number
184 + +
Information
p
When you hear the guidance asking your caller ID to be notified (see page 376), make a call again by adding “186” as
described in “To notify your caller ID” on page 48.
ON or OFF
Enter your Network Security Code
p
After checking, select “OK”.
d
d
p
See page 154 for the Network Security
Code.
.
You can check the setting contents of
“Activate”.
Confirming before Use
48
Own Number
<>
+m-0
Checking Your Own Number
You can display your subscribing phone number (own number). “Own number” is stored on the UIM.
m
1
Own Number display
Own number
You can press No to switch the tabs.
p
See page 361 for storing/displaying personal data.
List tab
Phone number tab
Confirming before Use
49
MEMO
50
Phone/Video-phone
Making Calls/Video-phone Calls
About Video-phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Making a Call/Video-phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
International Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹WORLD CALL› 56
Setting for International Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹International Dial Assist› 57
Switching between a Voice Call and Video-phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Using Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . .‹Redial›‹Dialed Calls›‹Received Calls› 60
Setting Chaku-moji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Chaku-moji› 63
Sending Touch-tone Signals Quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Pause Dial› 66
Storing Numbers to be Added to the Beginning of a Phone Number . . . . . . .‹Prefix Setting› 67
Making a Call with Specified Sub-address . . . . . . . . . . . . . . . . . . . . . . . ‹Sub-address Setting› 67
Selecting Alarm for Reconnecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Reconnect Signal› 68
Reducing Surrounding Noise to Make Voice Clear . . . . . . . . . . . . . . . . . . . ‹Noise Reduction› 68
Switching to Hands-free . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Hands-free› 68
Using Hands-free Compatible Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹In-Car Hands-free› 69
Receiving Calls/Video-phone Calls
Receiving a Call/Video-phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Switched between a Voice Call and Video-phone Call by the Other Party . . . . . . . . . . . . . . . 72
Setting Response of Key Operation for Answering Incoming Calls . . . . . . ‹Answer Setting› 73
Setting Response for when Opening FOMA Phone during Ringing . . . . . . . . .‹Open Phone› 74
Setting Response for when Closing FOMA Phone during a Call . . . . . ‹Setting when Folded› 74
Adjusting Earpiece Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Volume› 75
Adjusting Ring Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Ring Volume› 75
When You Cannot or Could not Answer the Call
Putting an Incoming Call on Hold when You cannot Answer at Once. . . . . . . . . . . ‹On Hold› 76
Putting a Call on Hold during a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .‹Holding› 76
Setting Hold Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Set Hold Tone› 77
Using Public Mode (Drive Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Public Mode (Drive Mode)› 77
Using Public Mode (Power Off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Public Mode (Power Off)› 79
If You could not Answer an Incoming Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Missed Call› 80
Recording Messages and Images when You cannot Answer the Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Record Message Setting› 80
Recording Messages and Images when You cannot Answer the Call during Ringing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Quick Record Message› 81
Playing/Erasing Record Messages/a Voice Memo/Video-phone Record Messages/Movie Memos
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Play/Erase Messages›‹Play/Erase Video-phone Messages› 82
Making Full Use of Video-phone Calls
Using Chara-den . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Useful Functions for Video-phone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Setting Video-phone Hands-free . . . . . . . . . . . . . . . . . . . . . . . ‹Hands-free with Video-phone› 87
Setting Image Quality for Video-phone Calls . . . . . . . . . . . . . . . . . . . . . . . ‹Visual Preference› 87
Changing Image Displays for Video-phone Calls. . . . . . . . . . . . . . . . . . . . . . . . ‹Select Image› 87
Redialing as a Voice Call when a Video-phone Call cannot be Connected
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ‹Voice Call Auto Redial› 88
Setting for Switching between a Voice Call and a Video-phone Call . . .‹Notify Switchable Mode› 89
Selecting Response to Incoming Video-phone Calls during i-mode . . ‹Video-phone while Packet› 89
Connecting FOMA Phone to External Devices to Use Video-phone Function . . . . . . . . . . . . 90
Checking inside the Room when You are Out . . . . . . . . . . . . . . . . . . . . . ‹Remote Monitoring› 90
51
About Video-phone
By using DoCoMo video-phones, you and the other party can talk viewing each other’s images.
DoCoMo video-phones conform to 3G-324M, standardized by the international standard 3GPP. You cannot connect to the
video-phone that uses a different format.
p
3GPP (3rd Generation Partnership Project):
This is the regional standards organization for developing common technical specifications for third-generation mobile
telecommunication systems (IMT-2000).
p
3G-324M:
This is the international standard for the third generation of mobile video-phones.
Connection speed of video-phone calls
64K: Communicates at 64 kbps of connection speed.
32K: Communicates at 32 kbps of connection speed.
■
Display during video-phone calls
…Image through the other party’s camera or substitute image
…Image through your camera or substitute image
…Call duration
…Status
: 64K communicating
: 32K communicating
: Voice sending/receiving
(gray):
Voice sending/receiving failed
: Image sending/receiving
(gray): Image sending/receiving failed
: Photo image sending
: Substitute image sending
: Chara-den talking
※2
: Hands-free activated
: Night Mode
: Chara-den Whole Action Mode
※
1
: Chara-den Parts Action Mode
: DTMF Transmission Mode
※
1 When voice sending fails, the other party cannot hear your voice.
When voice receiving fails, you cannot hear the other party’s voice.
※
2 When image sending fails, the other party cannot view the image through your camera.
When image receiving fails, you cannot view the image through the other party’s camera.
When voice or image sending/receiving fails, it does not recover automatically. You need to make a video-phone call again.
Phone/Video-phone
52
Making a Call/Video-phone Call
Enter the other party’s phone number, starting with the city code.
1
p
When 27 or more digits are entered, the lower 26 digits only are displayed.
p
You can make a call also by vocalizing and retrieving a Phonebook entry set in the Voice Dial Setting. (See page 124)
p
To store an entered phone number in the Phonebook, press l( ). Go to step 2 on page 114.
When Making a Voice Call
2
Press
d
p
Even when you are dialing within the same area, you need to enter the city code before
the phone number.
<Example>
City code Local code
03
p
To make calls to mobile phone
090−XXXX−XXXX
080
−
XXXX−XXXX
p
To make calls to PHS
070−XXXX−XXXX
or Oo().
p
“ ” blinks during dialing, and lights during a call.
XXXX
Phone number
XXXX
Other party’s phone number (11 digits)
Other party’s phone number (11 digits)
When Making a Video-phone Call
Press t.
p
“ ” or “ ” will blink during dialing and light during
the call.
p
During a video-phone call, you can press t to send
the substitute image to the other party. To resume
sending the image through your camera, press
again.
p
Just after purchase, Hands-free is automatically
activated during a video-phone call as “Hands-free
w/ V. phone” has been set to “ON”. (See page 87)
The digital communication
charging starts from this display.
p
If you hear the guidance requesting your caller ID (see page 376), follow the procedure for “To notify your caller ID”
on page 48 to enter “186” and redial.
p
Press d to activate Hands-free during a call. For video-phone calls, you can activate/deactivate Hands-free also
during dialing or connecting. (See page 68)
p
When the Flat-plug Earphone/Microphone with Switch (option) is connected, you can hear the other party’s voice
from the earphone. (See page 367)
p
If you close the FOMA phone during a call, the FOMA phone works in accordance with the setting of “Setting when
folded”. (See page 74)
p
You can press numeric keys to send touch-tone signals during a call. However, you need to switch to DTMF
Transmission Mode when you make a video-phone call with sending Chara-den image to the other party. (See page 86)
However, Hands-free is deactivated during Manner
Mode regardless of “Hands-free w/ V. phone”.
Phone/Video-phone
t
53
Press
h
to end the call after talking.
3
For the video-phone call, the call time is displayed after the disconnecting display disappears.
Information
p
You can make a voice call also by pressing d and then entering the party’s phone number. If you enter a wrong
number, press
p
When you make a video-phone call with substitute image, note that you will still be charged for the digital communication,
not the voice calls.
p
If you dial 110, 119 or 118 using the video-phone function, the number will be automatically dialed out as a voice call.
p
You can send a Chara-den image to other party instead of your own image during a video-phone call. (See page 83)
p
The International video-phone call is available using the DoCoMo international call service “WORLD CALL”. (See
page 56)
■
Display during dialing
The other party’s name and icon will be displayed if you have stored the party’s phone number and name in the Phonebook.
However, the image will not be displayed, even if you have stored it for that party.
p
If the same phone number is stored with multiple names in the Phonebook, the name that comes first in the search order
(see page 117) is displayed.
p
The phone number instead of the name will be displayed if the Phonebook entry has been stored as secret data, or if PIM
Lock is activated.
■
If you enter a wrong phone number
Each time you press r, the digit on the far right is cleared. If you press and hold r for at least one second, all the
digits are cleared and the Stand-by display returns.
p
PressNo to move the cursor to the digit you want to clear, and then press r to clear it. To clear all the digits on and
to the right of the cursor, press and hold
■
Photo-sending during a call
During a voice call, you can send the other party the still images you have taken on the spot or ones you have saved. (See
page 231)
■
If a video-phone call cannot be connected
When a video-phone call cannot be connected, the reason is displayed. (The displayed reason might not be the same as
the actual reason depending on the other party’s phone and contract for network services.)
Check number, then redial You have dialed a non-existent phone number.
Busy The other party is busy. (Depending on the receiver’s phone, this message might
Busy with packet transmission The packet communication is progress at the other end.
Out of service area/power off The other party’s phone is out of the service area or turned off.
Set caller ID to ON Your caller ID is not notified. (when dialing “V-live” or “Visualnet”)
Your call is being forwarded During forwarding
Redial using voice call The other party activates Call Forwarding Service but the forwarding destination
Upper limit has been exceeded
Connection failed
Please make your call from the i-mode
web page
Connection failed Redial after setting “Activate” of “Caller ID notification” to “ON”.
h
to clear the display and then redial.
r
for at least one second.
Messages Reasons
be displayed during packet communication as well.)
phone does not support video-phone calls.
The upper limit for the plan with the limit function (Type Limit, Family Wide Limit) is
exceeded.
You did not make a video phone call from the IP (Information Provider) site among
i-mode official sites (at dialing to V-live).
・
This may appear in the case other than above.
Phone/Video-phone
54
■
Auto-redialing
If a video-phone call is not connected, dialing at 32K or a voice call is automatically made.
Could not connect by dialing at 64K. Dials again at 32K. Dials again at 32K.
Could not connect by dialing at 32K. Dials again as a voice call. Does not dial again.
p
The video-phone call by 32K speed is provided to connect with PHSs and similar devices that cannot be connected at 64K
depending on the network conditions. When you dial a 64K video-phone call to the phone that can be connected only at
32K, the connection speed will be switched automatically to 32K.
※
The same digital communication fee applies to the 32K video-phone connection and 64K digital connection.
p
Video-phone calls cannot be connected to the phones that do not support the video-phone function, or to the phones that
are out of the service area or turned off even if they are video-phones. If you have set “Voice call auto redial” to “ON” and
attempt to dial a phone that does not have the video-phone function, the video-phone call will be cut off from the other end
and the number will be redialed as a voice call. However, this operation might not work if you call an ISDN-synchronous
64K or PIAFS access point or an ISDN video-phone that does not support 3G-324M (as of December 2006), or if you dial
the wrong number. Note that you could be charged for the communication.
p
Once the video-phone call has started communications, redialing as a voice call will not be made.
Voice call auto redial “ON” Voice call auto redial “OFF”
Function Menu while Entering Phone Number
Function menu Operation Explanation
Notify caller ID
Prefix numbers
Int’l dial assist
Multi number
Chaku-moji
Add to phonebook
Compose message
Connection speed
Select image
See page 48. You can set whether to notify your caller ID.
See page 67. You can add a prefix number.
See page 57. You can make an international call.
See page 379. You can select a phone number to be notified
See page 64.
See page 114. You can store the phone number in the
Go to step 3 on page 222. You can compose a mail message to send to
64K or 32K
See page 88. You can select an image for video-phone
to the other party.
You can make a call with a Chaku-moji message.
Phonebook.
the phone number set as the destination
address.
You can set the connection speed per
video-phone call.
p
The priority order of video-phone
connection speed is as follows: “Setting by
→
“Setting for Phonebook entry”
call”
“Group setting”.
calls.
→
Phone/Video-phone
55
WORLD CALL
<>
International Calls
WORLD CALL is the international call service available from DoCoMo mobile phones.
When you have signed up for FOMA service, you have contracted to use “WORLD CALL” (except those who
have applied not to use it).
p
You can call about 240 countries and regions.
p
The WORLD CALL charges are added to your monthly FOMA bill.
p
The application/monthly fee is free of charge.
p
Changes in procedures for international call
“My Line” service is not available for mobile communications such as mobile phones, so cannot be used with WORLD
CALL. However, in conjunction with the launch of “My Line” service, the dialing procedure for international calls from mobile
phones has changed. Note that the old way of dialing (the way without “010” from the following operation) no longer works.
p
The service is not available with some billing plans.
p
Contact “DoCoMo Information Center” on the back page of this manual for inquiries about WORLD CALL.
p
When using international carriers other than DoCoMo, contact them.
■
If the other party uses a specific 3G mobile phone overseas, you can press tto make an international
video-phone call after the dialing procedure described below.
p
For the information about connectable countries and telecommunications carriers, refer to the DoCoMo Global Service
web page.
p
Images sent from the other party may blur on your FOMA phone or you may not be able to connect, depending on the
other party’s phone used for the international video-phone call.
Enter a Phone Number to Make an International Call
Enter it in order of 009130→010→country code→area code (city code)
1
→
destination phone number
p
When the area code (city code) begins with “0”, leave this out when dialing. However, include “0” when making a call
to some countries or regions such as Italy.
p
Presst to make an international video-phone call.
d
or Oo()
Use “+” to Make an International Call
When you enter a phone number for dialing or storing it in the Phonebook, press and hold 0 for at least one
second to enter “+”. You can use “+” to make international calls without entering an international call access
code such as 009130-010.
p
Because “Auto assist setting” of “Int’l dial assist” is set to “ON” by default, an international call access code is automatically
entered.
0
(for at least one second)Enter numbers in order of country code
1
→
area code (city code)→destination phone number
Dial
p
When the area code (city code) begins with “0”, leave this out when dialing. However, include “0” when making a call
to some countries or regions such as Italy.
p
Presst to make an international video-phone call.
p
When you select “Dial with orig. No.”, you can make a call without adding an international call access code.
Phone/Video-phone
56
d
or Oo()
International Dial Assist
When you make a call, “+”, which was entered at the beginning of a phone number by pressing and holding
0
for at least one second, is replaced with an international call access code of “Int’l dial assist”.
Enter a phone number
1
or
bring up the detailed display of a Phonebook entry, redial item, dialed call
record, or received call record.
i
()Int’l dial assistSelect a name
2
p
Presst to make an international video-phone call.
p
When the beginning of the phone number is other than “+”, an international call access code is added. (When the
phone number starts by “0”, “0” at the beginning is automatically deleted.)
International Dial Assist
<>
d
or Oo()
Setting for International Calls
Auto Assist Setting
Setting at purchase ON
You can set whether to make a call by automatically replacing “+” which was entered at the beginning of a
phone number by pressing and holding
0
for at least one second with an international call access code.
m
1
ON or OFF
p
If “OFF” is selected, the setting is completed.
Select a nameSelect a country name.
2
p
When no international call access code or country code is stored, the confirmation display appears asking whether
to store it. Select “YES” and go to step 2 of “IDD Prefix Setting” on page 57 for an international call access code,
and go to step 2 on page 58 for a country code.
IDD Prefix Setting
Setting at purchase WORLD CALL (009130010)
You can store up to three international call access codes to be added to the beginning of a phone number for
making an international call.
m
1
Highlight <Not recorded> and press l().
Enter a nameEnter an international call access code
2
p
You can enter a name of up to 8 full-pitch or 16 half-pitch characters.
p
You can enter an international call access code of up to 10 digits.
Network settingInt’l dial assistAuto assist setting
Network settingInt’l dial assistIDD prefix setting
p
If you select the stored item, you can check the stored contents.
.
Phone/Video-phone
57
Country Code Setting
Setting at purchase
You can store up to 27 country codes.
m
1
Highlight <Not recorded> and press l().
p
If you select a stored country name, you can check the stored contents.
日本
(Japan), +81
Network settingInt’l dial assistCountry Code set.
Enter a country nameEnter a country code.
2
p
You can enter a country name of up to 8 full-pitch or 16 half-pitch characters.
p
You can enter a country code of up to 5 digits. But you cannot use #, :, and +.
Function Menu while IDD Prefix Setting/Country Code Setting is Displayed
Function menu Operation Explanation
Edit
Delete this
Delete all
Go to step 2 of “IDD Prefix Setting” on
page 57 for IDD Prefix Setting, and go to
step 2 on page 58 for Country Code Setting.
p
You can edit the item also by pressing
l
().
YES
Enter your Terminal Security Code
YES
−
p
You cannot delete the international call
access code or country code set by “Auto
assist setting”.
Switching between a Voice Call and Video-phone Call
You (caller) can switch between a voice call and a video-phone call. This function is available for the mobile
phones that can switch between a voice call and a video-phone call.
Switch from a Voice Call to Video-phone Call
When the other party’s phone has a function to switch between the calls, “ ” is displayed on your phone
and you can switch from the voice call to video-phone call.
During a voice call
l
()Change
1
p
When you select an image to be sent to the other party, select “Select image”. Go to step 2 of “Set by Call” on
page 88.
p
When “Cancel” is selected, the FOMA phone cancels switching and returns to the voice call.
p
While switching, the “Changing” display appears and the voice guidance to that effect is played back.
Phone/Video-phone
58
Switch from a Video-phone Call to Voice Call
When the other party’s phone has a function to switch between the calls, you can switch from the video-phone
call to voice call by selecting “CHG to voice call” from the Function menu.
During a video-phone call
i
()CHG to voice callYES
1
p
Select “NO” on the confirmation display to stop switching and to resume the video-phone
call.
p
While switching, the “Changing” display appears and the voice guidance to that effect is
played back.
Information
p
You can switch between a voice call and a video-phone call repeatedly.
p
When i-mode or packet communication is in progress, the communication is disconnected and then the voice call is
switched to the video-phone call. With packet communication, the confirmation display appears asking whether to
disconnect the communication.
p
When packet communication is in progress at the other end, the message to the effect that the communication cannot be
switched is displayed and the voice call continues without switching to the video-phone call.
p
You cannot switch from the voice call to the video-phone call while “Multi calling” is displayed during the call if you have
signed up for Call Waiting Service.
p
It takes about five seconds to switch. Switching may take a longer time depending on the radio wave conditions.
p
Depending on how the caller’s phone is working or on the radio wave conditions, switching between a voice call and
video-phone call may fail and the connection may be cut off.
p
If you switch between the voice call and video-phone call during a call, the call duration and call cost are counted
respectively for the calls. You are not charged while “Changing” is displayed.
p
You cannot switch between the video-phone call and voice call unless “Notify switchable mode” is set to “Indication ON” at
the other end. See page 89 for “Notify switchable mode”.
p
When you switch a video-phone call to voice call, Hands-free is automatically deactivated.
Phone/Video-phone
59
Redial Dialed Calls Received Calls
<>< >< >
Using Call Records
The FOMA phone can record the other party’s phone number and date/time you have dialed or received. You
can call back to the other party.
■
Redial
Dialed voice calls, video-phone calls and PushTalk calls up to 30 in total are recorded, and the older record of dialing to the
same phone number is deleted. However, the dialing by PushTalk is retained in Redial separately from that of the voice call or
video-phone call even if you dial to the same phone number.
■
Dialed Calls
Dialed voice calls, video-phone calls and PushTalk calls up to 30 in total are recorded, and 64K data and packet
communications up to 30 in total are recorded as well. The older record of dialing to the same phone number is also retained.
■
Received Calls
Incoming voice calls, video-phone calls and PushTalk calls up to 30 in total are recorded, and incoming 64K data and packet
communications up to 30 in total are recorded as well. The older record coming from the same phone number is also retained.
p
When a call is switched between a voice call and a video-phone call, the call that is dialed/received first is recorded.
p
When more than 30 calls are dialed, the older records are automatically deleted. Even if you turn off the FOMA phone, call
records are not deleted.
■
Icons for Redial, Dialed Calls, and Received Calls
/
/
/
/
/
/
※
Displayed in green for unchecked missed calls.
of voice call
Dialed and received calls/missed calls
※
of video-phone call
Dialed and received calls/missed calls
※
of PushTalk
Dialed and received group calls/missed
※
group calls of PushTalk
Dialed and received calls/missed calls
※
of PushTalk via server’s phonebook
Messages and images are recorded on
Record Message
Incoming calls of Remote Monitoring
Dialed and received calls/missed calls
※
of international call
Dialed and received calls/missed calls
※
/
/
/
Dialed and received calls/missed calls
※
of international video-phone call
Dialed calls of 64K data communication
Received calls/missed calls of 64K
※
data communication
Dialed calls of packet communication
Received calls/missed calls of packet
※
communication
Received calls of 64K data
communication and packet
communication when no external device
is connected
Received Chaku-moji message
Phone/Video-phone
60
Use Redial/Dialed Calls
When Using Redial
1
Stand-by display
When Using Dialed Calls
Vo
m
For Redial
Select a call record.
2
For Redial
Use Received Calls
Stand-by display
1
Received Call List
Dialed/recv. callsDialed calls
The list for call records is displayed.
p
You can display Dialed Calls also by
p
The latest data is displayed on the top.
p
Press d to make a voice call to the highlighted party. Press t to make a
video-phone call and press
p
For redial items of PushTalk, press Oo( ) to show the Redial List of the group.
Highlight a party and press p to make a PushTalk call. If you do not highlight any party
and press p, you can make a group call.
p
Press l( ) to display the Sent Address List.
The detailed display for the call record is displayed.
p
When the other party is stored in the Phonebook, the phone number, name, and icon are
displayed. If the same phone number is stored with multiple names in the Phonebook,
the name and icon that come first in the search order (see page 117) are displayed.
p
Press d or Oo( ) to make a voice call to the displayed phone number. Press
t
to make a video-phone call and press p to make a PushTalk call.
m24
p
to make a PushTalk call (group call).
Dialed calls.
Co
p
You can display the Received Call List also by
Received callsAll calls or Missed calls.
All calls . . . . . . . All the records including missed calls
Missed calls. . . . The records of missed calls only
(If unchecked missed calls are found, the number of them is displayed.)
p
The latest data is displayed on the top.
p
Press d to make a voice call to the highlighted party. Press t to make a
video-phone call and press
p
For received call records of PushTalk, press Oo( ) to show the Received Call List
of the group with “
PushTalk call. If you do not highlight any party and press
p
Press l( ) to display the Received Address List.
p
to make a PushTalk call (group call).
★
” mark added to the caller. Highlight a party and press p to make a
m
Dialed/recv. calls
p
, you can make a group call.
+m-2-4
Phone/Video-phone
61
Select a received call record.
2
Detailed Received Call display
Information
p
You can make a voice call to the most recently dialed or received number by pressing d from the Stand-by display
No
and then
p
When you make/receive a call with an additional phone number of Multi Number, the stored name for the additional phone
number is displayed below the phone number on the detailed display. If you store a phone number for “Number setting” of
“Multi number”, the phone number is displayed as well.
p
The dialed call records of 64K data communication are recorded only when the FOMA USB Cable (option) is connected.
p
Even if you make a voice call (or video-phone call) to the phone number in a received call record with a Chaku-moji
message displayed, the received Chaku-moji message is not sent.
p
When a call comes in from a party who uses a dial-in phone number, a different phone number might be displayed.
Function Menu while Redial/Dialed Calls/Received Calls is Displayed
Notify caller ID
Prefix numbers
Int’l dial assist
Multi number
Chaku-moji
Ring time
Feel＊Talk
Add to phonebook
Add desktop icon
Compose message
.
Function menu Operation Explanation
p
The caller ID is displayed if it was provided; and if this caller has been stored in the
Phonebook, the phone number, name, and icon are displayed. If the same phone
number is stored with multiple names in the Phonebook, the name and icon that come
first in search order (see page 117) are displayed.
If there was a call for packet communication, the sender’s access point name (APN) is
displayed.
When the other party’s phone number is not notified, the reason for no caller ID is
displayed.
p
For missed calls, the ring time is displayed on the right of the received date/time.
p
When a Chaku-moji message is received, it is displayed.
p
Press d or Oo( ) to make a voice call to the displayed phone number.
Press
t
to make a video-phone call and press p to make a PushTalk call.
See page 48. You can set whether to notify caller ID.
See page 67. You can add a prefix number.
See page 57. You can make an international call.
See page 379. You can select a phone number to be notified
See page 64.
−
See page 145.
See page 114.
p
You can store the phone number in the
Phonebook also by pressing
from the detailed display. Go to step 2 on
page 114.
See page 150.
Go to step 3 on page 222.
l
()
to the other party.
You can make a call with a Chaku-moji message.
You can display the ring time for missed
calls. Even if you have set “Missed calls
display” of “Ring time” to “Not display”, you
can check the missed calls which stopped
ringing within the specified ring start time and
their ring times.
p
You can operate only from the Function
menu of the Received Call List.
You can play back the Feel＊Talk image.
You can store the phone number in the
Phonebook.
You can paste the phone number to the desktop.
You can compose a mail message to send to the
phone number set as the destination address.
Phone/Video-phone
62
Function menu Operation Explanation
Compose SMS
Sent address
[Redial/Dialed Calls only]
Received address
[Received Calls only]
Delete this
Delete selected
Delete all
Connection speed
Select image
Store in P-Talk PB
Store P-Talk group
Go to step 3 on page 260. You can compose an SMS message to send
See page 248. You can display the Sent Address List.
See page 248. You can display the Received Address List.
YES
Put a check mark for redial items, dialed
call records, or received call records to be
deleted
l
()YES
Enter your Terminal Security Code
YES
See page 55. You can set the connection speed of
See page 88.
YES
Select a group.
p
When members who are not stored in the
PushTalk Phonebook are found, the
confirmation display appears asking
whether to store them.
Enter a group name.
p
You can enter up to 16 full-pitch or 32
half-pitch characters.
to the phone number set as the destination
address.
p
If you execute “Delete all” from the Function
menu of Redial/Dialed Calls, all records in
both Redial and Dialed Calls are deleted.
Even if you execute “Delete this” or “Delete
selected” of Redial, the records are not
deleted from Dialed Calls and they are
retained.
To delete the dialed call records, delete
them from the Function menu while “Dialed
calls” is displayed.
video-phone calls.
You can select an image for video-phone calls.
p
You cannot store from the call record for the
party who is not stored in the Phonebook.
p
You cannot store in a PushTalk group
unless all the members are stored in the
FOMA phone’s Phonebook.
Chaku-moji
<>
Setting Chaku-moji
When making a voice call or video-phone call, you can send your text message to tell the subject during
calling.
p
Compatible models . . . . . .902iS series, 903i series, 703i series, SH902iSL, N902iX HIGH-SPEED, SH702iS, P702iD, D702iF
p
The sending end is charged, but the receiving end is not charged.
■
When a Chaku-moji message is received
A Chaku-moji message is displayed below a sender. The Chaku-moji message is recorded in
Received Calls as well.
p
The Chaku-moji message is displayed only during ringing. It is not displayed during a call.
p
Even when a Chaku-moji message comes in within the ring start time set by “Ring time”, it is
received and recorded in Received Calls.
p
The Chaku-moji message is displayed on the Private window when “Chaku-moji” of “Called” on
page 139 is set to “ON”.
Phone/Video-phone
63
Create Chaku-moji Messages
You can store up to 10 Chaku-moji messages.
m
1
Highlight <Not stored> and press l()Enter a message.
Message List
Chaku-mojiCreate message
p
To edit a stored message, highlight it and press l().
p
You can enter up to 10 characters regardless of whether they are pictographs, symbols,
or full-pitch/half-pitch characters.
Make a Call with a Chaku-moji Message
Enter a phone number
1
or
bring up the detailed display of a Phonebook entry, redial item, dialed call
record, or received call record.
i
()Chaku-mojiDo the following operations.
2
Function menu Operation Explanation
Create message
Select message
Sent messages
Enter a message.
p
You can enter up to 10 characters
regardless of whether they are pictographs,
symbols, or full-pitch/half-pitch characters.
Select a message.
Select a sent message.
You can create a Chaku-moji message just
before dialing.
p
The Chaku-moji message created using this
function is not stored in the Message List.
From the Message List, you can select a
Chaku-moji message to be sent.
From the Sent Message List, you can select
a Chaku-moji message to be sent. Up to 10
sent Chaku-moji messages only are stored in
the Sent Message List. If you send the same
Chaku-moji message, the older one is
deleted. When the number of sent Chakumoji messages exceeds 10, the messages
are deleted from the oldest one.
Press
d
or Oo().
3
p
Presst to make a video-phone call.
p
The Chaku-moji message being sent is displayed during dialing.
Information
p
When a Chaku-moji message has arrived at the other party’s phone, “Transmission completed” is displayed, and you are
charged a transmission fee.
p
When a Chaku-moji message does not arrive at the other party’s phone such as when the other party’s phone is not a
Chaku-moji compatible mobile phone or the call is not allowed by “Message disp. settings” at the receiving end,
“Transmission failed” is displayed. In this case, you are not charged a transmission fee.
p
Depending on the radio wave conditions, the transmission result may not be displayed at the sending end even if a Chakumoji message has arrived at the other party’s phone. In this case, you are charged a transmission fee.
p
Even if you make a call with a Chaku-moji message attached, the Chaku-moji message is not displayed and you are not
charged a transmission fee (the call is not recorded in Received Calls at the receiving end) when the other party has the
following settings or is placed in the following states. Also, the transmission result is not displayed at the sending end.
･
When the other party’s phone is out of the service area, turned off, during Public Mode (Drive Mode), or the ring time for
Record Message Setting is set to zero seconds
p
When a video-phone call is not connected and automatically dialed at 32K or as a voice call, the Chaku-moji message is
resent as well.
p
Chaku-moji does not support PushTalk.
p
You cannot send Chaku-moji messages to anyone outside Japan.
Phone/Video-phone
64
Detailed Sent Message
Up to 10 sent Chaku-moji messages are stored in Sent Messages, and you can check for the other party’s
phone number and the date/time the Chaku-moji message was sent. Older messages sent to the same phone
number are also stored.
m
1
Chaku-mojiSent messages
p
The latest message is displayed at the top.
. . . Chaku-moji message successfully sent
. . . Chaku-moji message unsuccessfully sent
p
When the transmission result is not displayed, “ ” or “ ” is not displayed.
p
Depending on the radio wave conditions, the transmission result might not be displayed
correctly.
Select a sent message.
2
Function Menu while Detailed Sent Message is Displayed
Function menu Operation Explanation
Store
Delete this
Delete all
p
When the other party’s phone number is stored in the Phonebook, the phone number,
name, and icon are displayed.
<Not stored>
p
You can store also by pressing l().
YES
Enter your Terminal Security Code
YES
You can store a sent Chaku-moji message in
the Message List.
−
−
Message Display Settings
Setting at purchase Calls with callerID
You can set how incoming Chaku-moji messages are displayed.
m
1
Display all messages
Numbers stored in PB
Calls with callerID
Hide all messages
Chaku-mojiMessage disp. settingsSelect an item.
. . . Displays Chaku-moji messages from all callers.
. . . Displays Chaku-moji messages only from the callers stored in the Phonebook.
. . . . . . Displays Chaku-moji messages only from the caller notifying his/her phone number.
. . . . . . Does not display Chaku-moji messages.
Prefer Chaku-moji
Setting at purchase OFF
You can set how your FOMA phone works for incoming Chaku-moji messages for when “Open phone” is set to
“Answer”.
m
1
ON
. . . . . . . . . Does not answer by opening the FOMA phone during ringing, but displays a Chaku-moji message.
OFF
. . . . . . . . Answers by opening the FOMA phone during ringing. The FOMA phone immediately answers by
Chaku-mojiPrefer Chaku-mojiON or OFF
opening, so you may not check a Chaku-moji message. The Chaku-moji message is recorded in
“Received calls”.
Phone/Video-phone
65
Pause Dial
<>
+m-8-4
Sending Touch-tone Signals Quickly
Setting at purchase Not stored
You can send touch-tone signals from your FOMA phone to send messages to pagers, to reserve tickets, or to
check your bank balance.
Store Pause Dial
You need to store a number string to be sent as a touch-tone signal in the Pause Dial List. If you have inserted
a pause (p), you can send a number string breaking at the point where the pause is inserted.
m
1
Other settingsPause dial
p
When a number string is already stored, it is displayed.
p
You can store/edit a dial data also by pressing i( ) and selecting “Edit”.
p
To delete a stored pause dial, press i( ) and select “Delete”, then select “YES”.
l
()
Enter a number string.
2
p
Enter the pause (p) by pressing and holding a for at least one second.
p
You can use only 0 through 9,s,a to enter a number string and the pause (p).
p
You can enter up to 128 digits.
p
You cannot enter a pause (p) at the beginning of a number string, or enter it consecutively.
Send Pause Dial
m
1
p
You can send a pause dial also by pressing i( ) and selecting “Send pause dial”.
Enter a phone number
2
A voice call is made. Once the line is connected, a number string stored in Pause Dial is displayed up to the first
pause (p).
p
When the other party’s phone number is stored in the Phonebook, you can retrieve it selecting from the Search
Phonebook display by pressing
p
You can search for the phone number also from Received Calls by pressing Co or from Redial by pressing Vo.
Check that the line is connected
3
Other settingsPause dial
d
Bo
or Oo()
.
d
A number string up to the first pause (p) is sent, and a number string up to the next pause
(p) is displayed.
A number string up to the pause (p) is sent each time you press
When you have finished sending the last number, the “Talking” display comes up.
Oo
()
or Oo()
d
or Oo().
p
To send multiple pieces of a number string at a time, press and hold Vo for at least one second, and select “Send
at one time”.
Information
p
During a call, you can send a number string also by displaying the Function menu of the Pause Dial display.
p
Some devices on the receiving end cannot receive signals.
p
You cannot send a number string with pauses during a video-phone call.
Phone/Video-phone
66
Prefix Setting
<>
Storing Numbers to be Added to the Beginning of a Phone Number
Setting at purchase WORLD CALL (009130010)
You can store prefix numbers such as international call access codes or “184”/“186” and add them to the
beginning of the phone number for dialing. You can store up to seven prefix numbers.
m
1
Highlight <Not recorded> and press l().
Enter a nameEnter a prefix number.
2
p
You can enter a name of up to 8 full-pitch or 16 half-pitch characters.
p
You can enter a prefix number of up to 10 digits. The keys for entry are limited to 0 through 9,s and
a
.
Prefix Numbers
You can add a prefix number to the top of phone number when you make a call.
Enter a phone number
1
or
bring up the detailed display of a Phonebook entry, redial item, dialed call
record, or received call record.
i
()Prefix numbersSelect a name
2
p
Presst to make a video-phone call and press p to make a PushTalk call.
Sub-address Setting
<>
Network settingPrefix setting
p
You can store/edit a prefix also by pressing i( ) and selecting “Edit”.
p
If you select a stored prefix, you can check the stored contents.
p
To delete a stored prefix, press i( ) and select “Delete this” or “Delete all” then
select “YES”. If you select “Delete all”, you need to enter your Terminal Security Code.
d
or Oo()
Making a Call with Specified Sub-address
Setting at purchase ON
You can set whether to regard the numbers after “:” of a phone number as a sub-address to access the
specified phones or data terminals.
p
The sub-address is a number assigned to identify each ISDN terminal connected to an ISDN line. It is also used for selecting
contents on “V-live”.
m
Other settingsSub-address settingON or OFF
1
Information
p
Even if you set “Sub-address setting” to “ON”, “:” at the top of phone numbers and “:” immediately after the prefix
number or “186”/“184” are not regarded as sub-address mark-off symbols.
Phone/Video-phone
67
Reconnect Signal
<>
+m-7-7
Selecting Alarm for Reconnecting
Setting at purchase High tone
You can select an alarm that sounds until a voice call, video-phone call, or PushTalk communication is
reconnected after disconnected owing to bad radio wave conditions.
m
TalkReconnect signalSelect an alarm.
1
Information
p
The reconnectable time differs depending on the usage status and radio wave conditions. An estimate is about 10
seconds and the call charge is applied also for that duration.
p
While you are disconnected, no sound is transmitted to the other party.
Noise Reduction
<>
+m-7-6
Reducing Surrounding Noise to Make Voice Clear
Setting at purchase ON
You can suppress surrounding noise during a voice call to make your voice and the other party’s voice from
the earpiece clear.
m
TalkNoise reductionON or OFF
1
Hands-free
<>
Switching to Hands-free
When you switch to Hands-free, sound such as the other party’s voice is audible over the speaker.
During a call
d
1
For a voice call For a PushTalk callFor a video-phone call
When Hands-free is activated, “ ” is displayed.
p
For video-phone calls and PushTalk calls, you can activate/deactivate Hands-free also during dialing or connecting.
p
Pressd again to deactivate Hands-free.
p
The sound volume during a Hands-free call follows the setting specified by “Volume” (earpiece volume).
p
You can switch to Hands-free even during Manner Mode. Also, you will still hear voice through the speaker even
when you activate Manner Mode during a Hands-free call.
Phone/Video-phone
68
Information
p
While the Flat-plug Earphone/Microphone with Switch (option) is connected, you cannot hear voice through the speaker
even if you switch to Hands-free.
p
Keep the FOMA phone well away from your ear during a Hands-free call. Otherwise you could affect or damage your hearing.
p
Talk into the FOMA phone within a distance of about 50 cm.
In-Car Hands-free
<>
Using Hands-free Compatible Devices
You can make or receive voice calls from a Hands-free compatible device such as In-Car Hands-Free Kit 01
(option) or a car navigation system by connecting with your FOMA phone.
p
Connect using the USB cable:
To use the In-Car Hands-Free Kit 01 (option), you need to have the FOMA In-Car Hands-Free Cable 01 (option).
※
For how to operate Hands-free compatible devices, refer to the respective instruction manuals.
Information
p
To connect using the USB cable, set “USB mode setting” to “Communication mode”.
p
“ ” appears while you are talking or communicating using a USB Hands-free compatible device.
p
“ ” might appear while the FOMA phone is connected to a USB Hands-free compatible device, and “ ” while “USB
mode setting” is set to “microSD mode”, depending on the Hands-free device connected.
p
Screen display or a ring tone for incoming calls is in accordance with the settings of the FOMA phone.
p
When the sound is set to output from a Hands-free compatible device, the ring tone sounds from that device even when
Manner Mode is activated or “Ring volume” of the FOMA phone is set to “Silent”.
p
The receiving operation in Public Mode (Drive Mode) works in accordance with the “Public (Drive) mode” setting.
p
The receiving operation while Record Message is activated works in accordance with the “Record message setting”
setting.
p
When the sound is set to output from the FOMA phone, the FOMA phone works in accordance with “Setting when folded”
if it is closed during a call. When the sound is set to output from a Hands-free device, the communication state does not
change regardless of “Setting when folded” even if you close the FOMA phone.
Phone/Video-phone
69
Receiving a Call/Video-phone Call
When you answer a video-phone call, your image and the caller’s image are displayed. You can answer
video-phone calls without sending the image through your camera to the caller’s display. (Substitute image
answering)
When you receive a call, the ring tone sounds and the Call/Charging indicator
1
flickers.
p
To vibrate the FOMA phone for incoming calls, set “Phone” or “Videophone” of “Vibrator”
to other than “OFF”.
p
While “Manner mode” or “Super silent” is set, the ring tone does not sound.
(See page 133 and page 134)
p
When receiving a video-phone call, “Incoming V.phone” is displayed.
p
While receiving a call, information is displayed on the Private window.
p
“ ” is displayed at the upper right of the phone number for incoming international
calls.
Chaku-moji message (See page 63)
For Answering a Voice Call
2
Press
d
or Oo( ) to answer the call.
p
When “Answer setting” is set to “Any key answer”, the call is placed on hold if you
answer the call by pressing
when folded” to “No tone” or “End the call”, the other party hears nothing, and if you have
set “Setting when folded” to “Tone on”, the call hold tone is played back. You can start
talking by opening the FOMA phone.
<
with the FOMA phone closed. If you have set “Setting
For Answering a Video-phone Call
Press
t
or
d
to answer the video-phone call.
You can send the image through your camera to the
other party. Press
call, and the substitute image is sent to the other party.
p
Presst during a call, and then you can switch
between your photo image and substitute image for
sending to the other party.
p
Press d to activate Hands-free during a call. For video-phone calls, you can activate/deactivate Hands-free also
during connecting. (See page 68)
p
If you close the FOMA phone during a call, the FOMA phone works in accordance with the setting of “Setting when
folded”. (See page 74)
Phone/Video-phone
70
Oo
( ) to take a video-phone
■
One-push Answer
When a call comes in with the FOMA phone closed, you can answer the call just by pressing the one-push open button and
opening the FOMA phone. (See “Open Phone” on page 74)
■
Any Key Answer
You can answer an incoming call by pressing any key of 0 through 9,a,r,
addition to
※
p
p
3
p
p
<For Video-phone Calls>
p
p
p
p
■
When a caller’s phone number is provided
If the caller’s name, phone number, and image are stored in the Phonebook, the name, phone number, and icon (or image)
are displayed.
p
p
p
p
When a caller’s phone number is not provided
The reason for no caller ID is displayed. (See page 169)
d
You cannot start talking while “ ” is displayed.
Any Key Answer is not available for video-phone calls.
When “Answer setting” is set to “Quick silent”, you can stop only the ring tone or voice guidance by pressing a certain key.
Information
You might hear beeps (in-call ring tone) during a call.
If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call Forwarding Service and set “In-call
management” to “Answer”, the beeps (in-call ring tone) will sound for another incoming call, enabling you to do the
following operations:
Voice Mail Service . . . . . . Transfer the call to the Voice Mail Service Center. (See page 372)
Call Waiting Service . . . . . Put your current call on hold and answer the incoming call. (See page 373)
Call Forwarding Service . . Transfer the call to the registered forwarding destination. (See page 375)
You can set “Reject unknown” not to accept calls from the phone numbers not stored in the Phonebook.
Just after purchase, Hands-free is automatically activated during a video-phone call as “Hands-free w/ V. phone” has been
set to “ON”. (See page 87) However, Hands-free is deactivated during Manner Mode regardless of “Hands-free w/ V.
phone”.
Even if Call Forwarding Service is set to “Activate”, the call is not forwarded unless the forwarding destination is a phone
compatible with the video-phone conforming to 3G-324M (see page 52). Check the phone you are forwarding the call to
and then activate the service. The video-phone caller does not hear the guidance to the effect that the call is forwarded.
(The message to the effect that the call is to be forwarded appears, depending on the receiver’s FOMA phone.)
If a video-phone call comes in from the phone number to be rejected by Nuisance Call Blocking Service, the video
guidance for Call Rejection is played back and the call is disconnected.
You can send a Chara-den image to the other party instead of your own image. (See page 83)
Display for incoming calls
If the same phone number is stored with multiple names in the Phonebook, the name that comes first in the search order
(see page 117) is displayed.
The phone number but not the name is displayed if the party has been stored as secret data in the Phonebook, or if PIM
Lock is activated.
For a forwarded call, the forwarder is displayed below the phone number of the caller. (The forwarder’s phone number
might not be displayed in the case of some forwarders.)
When you receive a call to an additional phone number of Multi Number, the stored name for the additional phone number
is displayed below the caller. (With a forwarded call, you can press
and Oo().
Press
h
to end the call after talking.
For the video-phone call, the call time is displayed after the disconnecting display disappears.
l
( ) to switch to display of the forwarder.)
l※,c,No, and < in
Phone/Video-phone
71
Function Menu while a Call is Ringing
Function menu Operation Explanation
Call rejection
Call forwarding
Voice mail
−
See page 375. You can forward the call to the forwarding
See page 372. You can connect the call to the Voice Mail
You can disconnect the call without
answering.
p
You cannot execute “Call rejection” if you
set “Phone” of “Open phone” to “Answer”
and the call is received with the FOMA
phone closed.
destination.
Service Center.
Switched between a Voice Call and Video-phone Call by the Other Party
When you have set “Notify switchable mode” to “Indication ON”, the caller (the other party) can switch
between a voice call and video-phone call.
p
The receiving end cannot switch between a voice call and video-phone call.
Switched from a Voice Call to Video-phone Call by the Other Party
The display for switching to a video-phone call appears during a voice call.
1
YES
. . . . . . . .Sends the image through your camera to the caller.
NO
. . . . . . . . .Sends a pre-installed substitute image to the caller.
p
While switching, the message to that effect is displayed and the voice guidance is played
back.
Switched from a Video-phone Call to Voice Call by the Other Party
When a video-phone call is switched by the other party, the message telling that the call is being switched
appears, the voice guidance is played back, and then your side is switched to a voice call.
Phone/Video-phone
72
Answer Setting
<>
+m-5-8
Setting Response of Key Operation for Answering Incoming Calls
Setting at purchase Any key answer
You can set to start talking (Any key answer) or to stop the ring tone (Quick silent) by pressing a key besides
Oo,d,t
(for video-phone call) or p (for PushTalk call) for when a call or PushTalk call comes in.
m
Incoming callAnswer settingSelect a key operation.
1
Any key answer
You can start talking by pressing any key shown below:
Voice call
PushTalk call
p
PressOo,d or t to start talking for incoming video-phone calls.
Quick silent
The following are the keys you can press to stop the ring tone, vibrator or voice guidance:
When “Open phone” is set to “Keep ringing”, you can open the FOMA phone to stop the ring tone, vibrator or voice
guidance. Even if you stop it, the other party hears a calling tone.
Voice call
Video-phone call
PushTalk call
p
After you stop the ring tone, vibrator or voice guidance by the key operation above, you can press Oo,d or,
t
(for video-phone call), or press p (for PushTalk call) to start talking.
OFF
You can start talking by pressing a key shown below:
Voice call
Video-phone call
PushTalk call
Oo,d,0
Oo,d,t,p,0
0
through 9,a,r,
0
through 9,a,r,
t,0
Oo,d
Oo,d,t
Oo,d,p
through 9,a,r,
through 9,a,r,l,c,Bo,
l※,c,No,
through 9,a,r,l,c,Bo,
l※,c,No,
l※,c,No,
<
<
<
<
<
※
While “ ” is displayed, you cannot start talking or stop the ring tone, vibrator or voice guidance.
Information
p
While the Flat-plug Earphone/Microphone with Switch (option) is connected, you can press the switch to start talking,
regardless of “Answer setting”. (See page 367)
Phone/Video-phone
73
Open Phone
<>
Setting Response for when Opening FOMA Phone during Ringing
Setting at purchase Keep ringing
m
1
Keep ringing or Answer
Information
p
If you receive a video-phone call with “Answer” set, the still image set for “Substitute image” of “Select image” is sent to the
other party.
Setting when Folded
<>
Incoming callOpen phoneSelect an incoming type
+m-1-8
Setting Response for when Closing FOMA Phone during a Call
Call/Video-phone Call
Setting at purchase End the call
You can set how the FOMA phone works during a voice call and video-phone call.
m
1
Select an item.
No tone
. . . . . . . . . The voice is muted. The hold tone is not played back. The setting is completed.
Tone on
End the call
Speaker ON or Speaker OFF
2
Speaker ON
Speaker OFF
PushTalk
Setting at purchase Speaker call
You can set how the FOMA phone works during PushTalk communication. When “Speaker call” is selected,
you can communicate with the FOMA phone closed.
TalkSetting when foldedPhone/Videophone
. . . . . . . . The other party hears the hold tone set for “Holding tone” of “Set hold tone” while the FOMA
phone is closed.
. . . . . The call is finished. This is the same operation as pressing h during a call. The setting is
completed.
. . . . . The hold tone is played from the speaker.
. . . . The hold tone is not played from the speaker.
m
1
Speaker call or End the call
p
During PushTalk communication or when the PushTalk Phonebook List, PushTalk Group List, or Group Member
List is displayed, press
Information
p
This function is disabled when the Flat-plug Earphone/Microphone with Switch (option) is connected. The communication
state does not change even if you close the FOMA phone during a voice call or PushTalk communication. If you close the
FOMA phone during a video-phone call, the substitute image is sent to the other party with the line connected.
p
If you close the FOMA phone during a video-phone call with “No tone” activated, a substitute image is sent to the other
party. When “Tone on” is set, the still image selected by “Holding” of “Select image” is sent.
p
If you set to “No tone” or “Tone on”, “Holding” is displayed on the Private window when the FOMA phone is closed.
Phone/Video-phone
74
TalkSetting when foldedPushTalk
i
( ) and select “Set. when folded”.
Volume
<>
Adjusting Earpiece Volume
Setting at purchase Level 4
m
1
Information
p
The earpiece volume adjusted during a call is retained even after the call ends.
p
When you adjust the earpiece volume, the sound volume during a Hands-free call or Speaker call for PushTalk is also
adjusted.
Ring Volume
<>
TalkVolumeUseBo to adjust the earpiece volume.
Adjust the earpiece volume to Level 1 (minimum) through Level 6 (maximum). To raise the
volume, press
p
You cannot adjust the volume during ringing. Adjust it during a call or standby.
p
During a call, PushTalk call, or calling, you can press Bo,< or >, while entering
phone number, you can press and hold Bo (for at least one second) to adjust the
volume. Press Bo or < or > within two seconds to adjust the volume.
Zo
or <; to lower it, press Xo or >.
+m-5-0
Adjusting Ring Volume
Setting at purchase Level 4
You can adjust the ring volume for incoming calls and mail.
m
Incoming callRing volumeSelect a type of receiving
1
UseBo to adjust the volume.
p
Following icons are displayed on the Stand-by display while the ring volume is set to
“Silent”:
: The ring volume for voice calls, PushTalk calls or video-phone calls is “Silent”.
: The ring volume for mail, chat mail or Messages R/F is “Silent”.
: The ring volume for voice calls, PushTalk calls, or video-phone calls is “Silent” and
the ring volume for mail, chat mail, or Messages R/F is “Silent”.
p
If you have set “Step”, the ring tone is silent for about three seconds, and then the
volume steps up every three seconds, from Level 1 through Level 6.
p
During ringing of a voice call or video-phone call, you can adjust the ring volume also by
pressing and holding
the ring volume in the following cases:
・
“Ring volume” is set to “Step”.
・
“Answer setting” is set to “Quick silent” and you stop the ring tone or voice guidance.
・
During Manner Mode
・
Incoming calls within the ring start time specified by “Ring time”
Bo,<
or > for at least one second. However, you cannot adjust
Phone/Video-phone
75
On Hold
<>
Putting an Incoming Call on Hold when You cannot Answer at Once
During ringing
1
Press
d,t
2
p
If “Answer setting” is set to “Any key answer”, you can release hold of voice calls by pressing any key of
through 9,a,r,l,c,Mo,<,>,s, or i.
p
If a video-phone call is on hold, the image through your camera is sent to the other party by pressing t or
to release hold. If you press
Information
p
The caller is charged for the call even during answer-hold.
p
If you press h during answer-hold, the call will be disconnected.
Holding
<>
h
The FOMA phone makes three rapid beeps for confirmation and the incoming call is put
on hold.
p
The confirmation tone does not sound while Manner Mode is activated or when “Phone”
of “Ring volume” is “Silent”.
p
The other party hears the hold tone set for “On hold tone” of “Set hold tone”.
For video-phone calls, the still image set for “On hold” of “Select image” is displayed.
or Oo to release hold and answer the call.
Oo
( ) to release hold, the substitute image is sent.
Putting a Call on Hold during a Call
During a call
1
p
The other party hears the hold tone set for “Holding tone” of “Set hold tone”. For video-phone calls, the still image
set for “Holding” of “Select image” is displayed.
p
You can put the call on hold by closing the FOMA phone during the call if you have set “Setting when folded” to
“Tone on”.
r
0
d
Press
d
or Oo to release hold and answer the call.
2
p
Pressr to release hold. If a video-phone call is on hold, the image through your camera is sent to the other
party by pressing t or d to release hold. If you press Oo() or r to release hold, the substitute
image is sent.
p
If you have set “Setting when folded” to “Tone on” and put the call on hold by closing the FOMA phone, open the
FOMA phone or connect the Flat-plug Earphone/Microphone with Switch (option) to answer the call.
If you connect the Flat-plug Earphone/Microphone with Switch to answer the video-phone call, the substitute image
is sent to the other party.
Information
p
The caller is charged for the call even while the call is on hold.
p
If a new call comes in while the current call is put on hold, the hold is released.
Phone/Video-phone
76
Set Hold Tone
<>
Setting Hold Tone
Setting at purchase On hold tone: Tone 1 Holding tone: JESU JOY OF MAN’S DESIRING
You can set the guidance the other party hears during on hold.
m
1
Select a hold tone.
Tone 1
. . . . . . . . . . . . . . . . . . The caller hears the guidance “I cannot answer the call. Hold the line, or redial after a
Tone 2
. . . . . . . . . . . . . . . . . . The caller hears the guidance “I cannot answer the call. Redial after a while” in
JESU JOY OF MAN’S
Voice announce 1
Voice announce 2
p
Pressl( ) to play back a hold tone. Press r to end the demo playback.
Public Mode (Drive Mode)
<>
TalkSet hold toneOn hold tone or Holding tone
while” in Japanese. You can set this for “On hold tone” only.
Japanese. You can set this for “On hold tone” only.
. . . . . The melody is played back. You can set this for “Holding tone” only.
. . . . . . . . The caller hears the voice recorded by “Voice announce”. If it has not been recorded,
this is not displayed.
. . . . . . . . The caller hears the voice recorded by “Voice announce”. If it has not been recorded,
this is not displayed.
Using Public Mode (Drive Mode)
Setting at purchase Released
Public Mode is an auto-answer service that puts importance on manners in public spaces. Once you activate
Public Mode, the guidance is played back telling that you cannot answer the call as you are currently driving or
in a place (such as in a train, bus, or movie theater) where you should refrain from answering the call. Then the
call is disconnected.
Stand-by display
1
Public Mode is activated and “ ” is displayed.
When a call comes in, the guidance “The person you are calling is currently driving or in an area where cell phone
should not be used. Please try again later.” is played back for incoming calls.
p
To deactivate Public Mode, perform the same operation. Then, Public Mode is deactivated and “ ” disappears.
Information
p
You can activate/deactivate Public Mode only from the Stand-by display. You can activate/deactivate Public Mode even
when “ ” is displayed.
p
You can make calls as usual even during Public Mode. However, if you dial emergency call phone numbers “110”, “119”,
“118”, Public Mode is released.
p
When Public Mode and Manner Mode are activated simultaneously, Public Mode has priority.
p
If a “User unset” call comes in while “Caller ID request” is set to “Activate”, the Caller ID Request guidance is played back.
(The Public Mode guidance is not played back.)
p
You cannot use this function during data communication.
a
(for at least one second)
Phone/Video-phone
77
■
When Public Mode (Drive Mode) is activated
・
Even when a call comes in, the ring tone does not sound. The “Missed call” icon appears on the display and the call is
recorded in “Received calls”. The guidance is played back to the caller to the effect that you are currently driving or in an
area where mobile phones should not be used. Then the call is disconnected. When a PushTalk call comes in, no answer
is made and the message “Connection failed” appears on the caller’s display. For the talk among three or more members,
the message to the effect that you are driving is conveyed to them.
However, when the power is off or “ ” is displayed, the caller hears the out-of-service area guidance instead of the
Public Mode guidance.
・
The ring tone does not sound and the Call/Charging indicator does not flicker even when mail or a message comes in. In
addition, the set vibrator does not work.
・
The ring tone for 64K data communication, alarm tone, and charging confirmation tone do not sound, and a melody while
i-
α
ppli is running is not played back.
・
The i-channel tickers do not flow.
■
Relations between incoming calls during Public Mode (Drive Mode) and respective services
Service Responses to Incoming Voice Calls
※
Voice Mail Service
Call Forwarding Service
Call Waiting Service Plays back the Public Mode guidance, and then the
Nuisance Call Blocking
Service
Caller ID Display Request
Service
※
If the ring time is set to 0 seconds, the FOMA phone is out of the service area, or the power is off, the Public Mode
guidance is not played back, but Voice Mail Service or Call Forwarding Service works. Note that in this case the call is not
notified by the “Missed call” icon and not stored in “Received calls”.
Plays back the Public Mode guidance, and then the
call is connected to the Voice Mail Service Center.
※
Plays back the Public Mode guidance, and then the
call is forwarded to the forwarding destination.
Whether the guidance is played back or not
depends on the guidance setting of Call Forwarding
Service. If “Plays guidance” is set, plays back the
Public Mode guidance. If “Does not play guidance”
is set, does not play back the guidance.
call is disconnected.
For the call from the phone number registered to be
rejected, plays back the Call Rejection guidance,
and then the call is disconnected.
For the caller without a caller ID, plays back the
Caller ID Request guidance, and then the call is
disconnected.
For the caller with a caller ID, plays back the Public
Mode guidance, and then the call is disconnected.
Responses to Incoming
Video-phone Calls
Does not play back the video guidance
for Public Mode, and the call is
connected to the Voice Mail Service
Center.
Does not play back the video guidance
for Public Mode, and the call is
forwarded to the forwarding
destination.
If the destination does not support
video-phone calls, the call is
disconnected.
Plays back the video guidance for
Public Mode, and then the call is
disconnected.
For the call from the phone number
registered to be rejected, plays back
the video guidance for Call Rejection,
and then the call is disconnected.
For the caller without a caller ID, plays
back the video guidance for Caller ID
Request, and then the call is
disconnected.
For the caller with a caller ID, plays
back the video guidance for Public
Mode, and then the call is
disconnected.
Phone/Video-phone
78
Public Mode (Power Off)
<>
Using Public Mode (Power Off)
Public Mode (Power Off) is an auto-answer service that puts importance on manners in public spaces. Once
you activate Public Mode (Power Off), the guidance is played back telling that you cannot answer the call as
you are currently in a place (such as in hospital, airplane, or around priority seat in a train) where use is
prohibited. Then the call is disconnected.
Enter “:25251”
1
Public Mode (Power Off) is set. (Nothing is changed on the Stand-by display.)
After setting Public Mode (Power Off) and turning off the power, the guidance “The person you are calling is currently
in an area where use is prohibited. Please try again later.” is played back for incoming calls.
p
To release Public Mode (Power Off), dial “:25250”.
p
To check the setting for Public Mode (Power Off), dial “:25259”.
■
When Public Mode (Power Off) is activated
The setting stays activated until you dial “:25250” to deactivate Public Mode (Power Off). You cannot deactivate the setting
just by turning on the power.
The guidance is played back to the caller telling that you are currently in a place where you should turn off the power. Then
the call is disconnected. When a PushTalk call comes in, no answer is made and the message “Connection failed” appears
on the caller’s display. For the talk among three or more members, the message to the effect that you do not participate is
conveyed to them.
The Public Mode (Power Off) guidance is played back even when you are out of the service area or out of reach of radio
waves.
■
Relations between incoming calls during Public Mode (Power Off) and respective services
Service Responses to Incoming Voice Calls
Voice Mail Service Plays back the Public Mode (Power Off) guidance,
Call Forwarding Service Plays back the Public Mode (Power Off) guidance,
Nuisance Call Blocking
Service
Caller ID Display Request
Service
※
If the ring time is set to 0 seconds, the Public Mode (Power Off) guidance is not played back, but Voice Mail Service or Call
Forwarding Service works.
d
and then the call is connected to the Voice Mail
Service Center.
and then the call is forwarded to the forwarding
destination.
Whether the guidance is played back or not
depends on the guidance setting of Call
Forwarding Service. If “Plays guidance” is set,
plays back the Public Mode (Power Off) guidance.
If “Does not play guidance” is set, does not play
back the guidance.
For the call from the phone number registered to
be rejected, plays back the Call Rejection
guidance, and then the call is disconnected.
For the caller without a caller ID, plays back the
Caller ID Request guidance, and then the call is
disconnected.
For the caller with a caller ID, plays back the
Public Mode (Power Off) guidance, and then the
call is disconnected.
※
※
Responses to Incoming
Video-phone Calls
Does not play back the video guidance
for Public Mode (Power Off), and the call
is connected to the Voice Mail Service
Center.
Does not play back the video guidance
for Public Mode (Power Off), and the call
is forwarded to the forwarding
destination.
If the destination does not support
video-phone calls, the call is
disconnected.
For the call from the phone number
registered to be rejected, plays back the
video guidance for Call Rejection, and
then the call is disconnected.
For the caller without a caller ID, plays
back the video guidance for Caller ID
Request, and then the call is
disconnected.
For the caller with a caller ID, plays back
the video guidance for Public Mode
(Power Off), and then the call is
disconnected.
Phone/Video-phone
79
Missed Call
<>
If You could not Answer an Incoming Call
When you could not answer calls (Missed calls) or you have new mail, or when a message for record message,
video-phone record message or Voice Mail Service is recorded, the “Notification icon” appears on the Stand-by
display. You can skip to each function by selecting the icon.
See page 149 for each icon.
Stand-by display
1
Notification icon
■
When the FOMA phone is closed
Record Message Setting
<>
The information is displayed on the Private window.
Press
OoOo
<
to display the missed call record. (See page 28)
()
The explanation of the icon appears.
p
Pressh or r to return to the former display.
p
When multiple icons are found, use Mo to highlight
an icon and press
Oo
().
+m-5-5
Recording Messages and Images when You cannot Answer the Call
By activating Record Message, you can play back an answer message to incoming calls and record callers’
messages/images when you cannot answer them even if you have not signed up for Voice Mail Service.
You can record up to five messages for voice calls and up to two messages/images for video-phone calls. Each
message can be recorded for up to 20 seconds.
Activate Record Message
Setting at purchase
Record message setting: OFF Answer message: Japanese 1 (when “Record message” is set to “ON”)
Ring time: 13 seconds (when “Record message” is set to “ON”)
m
1
p
The setting is completed when you have selected “OFF”.
Rec. msg/voice memoRecord message settingON or OFF
Select an answer message.
2
p
Pressl( ) to play back the answer message. Press r to end the demo playback.
p
When “Japanese 1”, “Japanese 2”, or “English” is set, a beep sounds after playing back the answer message to the
other party. If “Voice announce 1” or “Voice announce 2” is set, the beep does not sound.
Enter a ring time (seconds).
3
p
Enter from “000” through “120” in three digits.
p
You cannot set the same ring time for Remote Monitoring, Automatic Answer and Record Message Setting.
Set a different time for each.
p
While Record Message is activated, “ ”〜“ ” (the number of recorded messages for voice calls) and “ ”
“ ” (the number of recorded messages for video-phone calls) are displayed.
Phone/Video-phone
80
〜
■
Incoming calls when Record Message is set to “ON”
The ring time
elapses
Incoming Call Playing back the answer message Displaying an icon on the
For a video-phone call, the still image set for “Preparing” of “Select image” is displayed on the other party’s display while
playing back the answer message, and the still image set for “Record message” of “Select image” is displayed while recording.
■
To answer a call while the answer message is played back or a message is recorded
Pressd or Oo.
For video-phone calls, press
substitute image.
You can take calls by pressing the switch on the Flat-plug Earphone/Microphone with Switch (option). For video-phone
calls, your own photo image is sent to the other party.
Information
p
Record Message does not work when “ ” is displayed.
p
When Public Mode (Drive Mode) and Record Message are simultaneously activated, the former has priority and the latter
does not work.
p
The priority order of answer messages is as follows: “Setting for Phonebook entry” → “Group setting” → “Record message
setting”.
p
If “Voice announce 1” or “Voice announce 2” set as the answer message is deleted, the answer message will be set to
“Japanese 1”.
p
When Voice Mail Service or Call Forwarding Service is set at the same time as Record Message, the priority depends on
the ring time set for Voice Mail Service or Call Forwarding Service. To give Record Message priority, set its ring time
shorter than that for Voice Mail Service or Call Forwarding Service. Even when you do this, Voice Mail Service or Call
Forwarding Service will work if there are already five record messages for voice calls and two record messages for
video-phone calls.
p
You cannot receive a call from a third party while a record message/image is being recorded. The third party will hear the
busy tone.
■
Important
The saved contents may be lost due to a malfunction, repair, or other mishandling of the FOMA phone. We cannot be held
responsible for loss of the saved contents, so, for just in case, you are advised to take notes of the contents saved to the
FOMA phone and store them separately.
■
t
or d to send the image through your camera, or press Oo( ) to send the
Recording a message/image
desktop (See page 149)
Quick Record Message
<>
Recording Messages and Images when You cannot Answer the Call during Ringing
Even if a call comes in while Record Message is not activated, you can record the caller’s message and image
just for that incoming call.
During ringing
1
Manner Mode is also activated.
The caller will hear the answer message and then can leave you a record message/image.
p
Record Message does not work when five messages for voice calls and two messages for video-phone calls have
already been recorded or when a PushTalk call comes in.
p
When “Side keys guard” is set to “ON”, you cannot activate Record Message by pressing > with the FOMA phone
closed.
s
or
>
Phone/Video-phone
81
Play/Erase Messages Play/Erase Video-phone Messages
<>< >
+m-5-5
Playing/Erasing Record Messages/a Voice Memo/ Video-phone Record Messages/Movie Memos
Play/Erase Record Messages/a Voice Memo
m
1
Select a record message or voice memo.
Record Message List
■
To use > for playback
From the Stand-by display, press > to play back the latest record message. When record messages are not recorded, a
voice memo is played back.
■
To skip to next message
Each time you press > during playback, messages are played back in the following order: the next new message → the
oldest record message
■
To cancel playback midway
PressOo() or r.
Rec. msg/voice memoPlay/Erase msg.
A beep sounds and playback starts.
p
On the Record Message List, recorded items are indicated by “★”.
p
It is played back at the volume set for “Volume” (earpiece volume).
p
When playback ends, a double-beep sounds and the message “Playing” is cleared from
the display.
p
The date and time the message/memo was recorded are displayed during playback.
When a caller’s phone number is provided, it is displayed. If the caller is stored in the
Phonebook, his/her name is also displayed. However, the name is not displayed and the
phone number only is displayed when you play back a record message from the caller
stored as secret data in Normal Mode.
p
→
a voice memo.
If the caller’s phone number is displayed during playback, you can make a voice call to
that phone number by pressing
p
to make a PushTalk call.
d
. Press t to make a video-phone call and press
Play/Erase Video-phone Record Messages/Movie Memos
m
1
Select a video-phone record message or movie memo.
Rec. msg/voice memoPlay/Erase VP msg.
p
On the Video-phone Record Message List, recorded items are indicated by “★”.
p
It is played back at the same volume of the playback sound of i-motion movies.
p
The date and time the message/memo was recorded are displayed during playback.
Video-phone Record Message
List
■
To use > for playback
From the Stand-by display, press and hold > for at least one second to play back the latest video-phone record message.
When video-phone record messages are not recorded, the latest movie memo is played back.
■
To cancel playback midway
PressOo() or r.
Phone/Video-phone
82
Function Menu of the Record Message List/Video-phone Record Message List
Function menu Operation Explanation
Play
Erase this
Erase rec. msg.
Erase movie memo
[Video-phone Record
Message List only]
Erase all
−
YES
p
You can erase a message/memo also by
pressing
l
( ) during playback.
YES
YES
YES
You can play back a message.
−
You can erase all record messages from the
Record Message List, and can erase all
video-phone record messages from the
Video-phone Record Message List.
You can erase all movie memos.
You can erase all record messages and a
voice memo from the Record Message List,
and can erase all video-phone record
messages and movie memos from the
Video-phone Record Message List.
Using Chara-den
You can send a Chara-den image instead of the image through your camera.
p
See page 310 for Chara-den images.
Set by Call
You can set a Chara-den image to be sent to the other party for making a video-phone call.
Chara-den display/Chara-den List
1
Enter the destination phone number and press t or Oo( ) to make a video-phone call.
p
When the other party’s phone number is stored in the Phonebook, you can retrieve it selecting from the Search
Phonebook display by pressing
p
You can search for the phone number also from Received Calls by pressing Co or from Redial by pressing Vo.
Information
p
The priority order of substitute images to be sent to the other party is as follows: “Setting by call” → “Setting for Phonebook
entry”
→
“Group setting” → “Select image”.
Bo
.
i
()Chara-den call
Substitute Image
Setting at purchase Dimo
You can set a Chara-den image for “Substitute image” of “Select image”.
Chara-den display/Chara-den List/Chara-den Recording display
1
i
()Substitute image
Phone/Video-phone
83
Chara-den Setup
You can configure settings for a Chara-den call. These settings are effective only for during a video-phone call.
During a Chara-den call
1
Do the following operations.
Item Operation Explanation
Switch Chara-den
Action list
Change action
At video-phone start-up
Whole Action Mode
SW substitute img.
SW org.subst.img.
p
p
p
i
()Chara-den setup
Select a Chara-den image.
Highlight an action and press Oo()
to execute the action. Press
check the details of the action.
You can display the Action List also by
pressing
a
.
You can switch modes also by pressing
l
.
l
() to
−
−
p
If you switch Chara-den images, the action
mode switches to Whole Action Mode.
You can display the list for actions that you
can operate.
You can switch the action mode between
Whole Action Mode ( ) and Parts Action
Mode ( ).
You can switch a substitute image to be sent
to the other party to the still image set for
“Pre-installed” of “Select image”.
You can switch a substitute image to be sent
to the other party to the still image set for
“Original” of “Select image”.
Useful Functions for Video-phone Calls
Switch Cameras
At video-phone start-up Inside camera
You can switch images to be sent to the other party from through the inside camera to through the outside
camera.
During a video-phone call
1
p
Pressl( ) again to return to the previous state.
p
You can switch the cameras also by pressing i( ) and selecting “Outside camera” or “Inside camera” from
the Function menu.
p
The setting here is effective only for the current video-phone call.
l
()
Send Substitute Images
You can switch images to be sent to the other party from the image through your camera to the still image or
Chara-den image set as the substitute image.
See page 310 for Chara-den.
During a video-phone call
1
The substitute image is sent to the other party.
“ ” is displayed while the still substitute image is being sent, and “ ” is displayed if you have set a Chara-den
image as a substitute image (during a Chara-den call).
p
Presst again to switch from the substitute image to the image through your camera.
Phone/Video-phone
84
t
■
About substitute images to be sent
You can set a substitute image by the three functions described below:
・
A Chara-den image stored in a Phonebook entry
・
A Chara-den image set by “Group setting”
・
A still image or Chara-den image set for “Substitute image” of “Select image”
In addition, you can set a Chara-den image by call. (See page 83)
→
The priority order of substitute images to be sent to the other party is as follows: “Setting by call”
entry”
→
“Group setting” → “Select image”.
Note that “Setting for Phonebook entry” and “Group setting” are disabled when a video-phone call comes in without notifying
the caller ID.
■
To answer a video-phone call sending a substitute image
PressOo( ) to answer the video-phone call during ringing.
p
To switch the substitute image to the image through your camera, press t.
Information
p
Even when you make a video-phone call sending a substitute image, you are charged for the digital communication.
“Setting for Phonebook
Switch Image Display Positions
You can switch the display locations of your image and the other party’s image.
During a video-phone call, press
Oo
().
1
+Oo +Oo +Oo
p
Each time you press Oo( ), the displays switch.
+Oo
Zoom
At video-phone start-up Wide
You can adjust zoom magnification for a photo image to be sent to the other party.
During a video-phone call, the maximum magnification is 2.0 times for the inside camera and 2.91 times for the
outside camera.
During a video-phone callUseNo to adjust the zoom magnification.
1
p
The former zoom setting returns when the video-phone call ends.
Function Menu during Video-phone Call
Function menu Operation Explanation
CHG to voice call
V.phone settings
(Visual preference)
See page 59. You can switch the current video-phone call
See page 87. You can set the image quality.
to the voice call.
Phone/Video-phone
85
Function menu Operation Explanation
V.phone settings
(Brightness)
At video-phone start-up
0
V.phone settings
(White balance)
At video-phone start-up
Automatic
BrightnessSelect a brightness.
White balanceSelect an item.
Fine weather
. . .For talking outdoors in fine weather
Cloudy weather
You can adjust the brightness of the image to
be sent to other party to -3 (dark) through +3
(bright).
You can adjust the colors of the photo image
to be sent to the other party, to make the
colors look more natural.
. . .For talking in cloudy weather or in the
shade
Automatic
. . .For adjusting white balance automatically
Light bulb
. . .For talking under lighting
V.phone settings
(Color mode set)
At video-phone start-up
Normal
V.phone settings
(Night mode)
At video-phone start-up
OFF
Chara-den setup
Backlight
Setting at purchase
Constant light
LCD AI
Color mode setSelect a color tone.
You can switch the color tone of the photo
image to be sent to the other party.
Night modeON or OFF
You can lengthen the camera’s exposure
time to make the photo image to be sent clear
in a dark place.
See page 84.
Constant light or 15 seconds light
You can configure settings for Chara-den calls.
You can select whether to light the display
constantly or light for about 15 seconds after
an operation.
See page 142. You can set whether to automatically adjust
the brightness of the display backlight and
compensate the image quality according to
the brightness.
Outside camera/Inside
See page 84. You can switch the cameras.
camera
Send DTMF tone/
DTMF tone OFF
−
During a Chara-den call, you can switch to
the DTMF Transmission Mode that enables
you to enter the data from the numeric keys
and to send DTMF (touch-tone signals). You
can operate it only during a Chara-den call.
p
“Send DTMF tone” is displayed when the
mode is not DTMF Transmission Mode and
“DTMF tone OFF” is displayed in DTMF
Transmission Mode.
p
In DTMF Transmission Mode, you cannot
operate the action of Chara-den images.
p
The DTMF tone may not be received
depending on the device of a receiving end.
Call time disp.
See page 363. You can select whether to display the call
duration during a video-phone call.
Own number
Key guide
−
p
After checking, press r. You can display the guide of key operation
You can display your phone number.
during a video-phone call.
Phone/Video-phone
86
Hands-free with Video-phone
<>
Setting Video-phone Hands-free
Setting at purchase ON
You can set whether to switch to Hands-free automatically for when a video-phone call starts.
m
1
p
See page 68 for the operation while Hands-free is activated and how to switch to Hands-free.
Visual Preference
<>
VideophoneHands-free w/ V. phoneON or OFF
Setting Image Quality for Video-phone Calls
Setting at purchase Normal
You can set the quality of the other party’s image on the display and of your image to be sent.
m
1
p
“Prefer motion spd” is effective for moving images. When there is little motion, the quality becomes better if you set
to “Prefer img qual”.
p
Select “Visual preference” of “V.phone settings” from the Function menu by pressing i( ) during a
video-phone call. The setting here is effective only for the current video-phone call.
Information
p
If the radio wave conditions weaken during a video-phone call, the image may appear like a mosaic.
Select Image
<>
VideophoneVisual preferenceSelect an image quality.
Changing Image Displays for Video-phone Calls
Setting at purchase
You can set an image to be sent to the other party instead of the image through your camera.
m
1
On hold
Holding
Substitute image
Record message
Preparing
Movie memo
Select an image.
2
Image Selection display
Information
p
Even if you delete the still image selected from “Original”, that still image is displayed to the other party. To change, set by
“Change setting” or “Set display”.
On hold: Pre-installed Holding: Pre-installed Substitute image: Chara-den (Dimo)
Record message: Pre-installed Preparing: Pre-installed Movie memo: Pre-installed
VideophoneSelect imageSelect an item.
. . . . . . . . . . .Sets an image for “On hold” (answer-hold).
. . . . . . . . . . .Sets an image for “Holding” during a call.
. . .Sets a substitute image (still image or Chara-den) for when a camera is off.
. . .Sets an image while recording a record message.
. . . . . . . . .Sets an image while playing back an answer message.
. . . . . . .Sets an image while recording a movie memo.
Pre-installed
Original
Chara-den
p
Press l( ) to play back a demo to check the still image or Chara-den image.
. . . For sending a pre-installed still image to the other party.
. . . . . . For sending an appropriate message with a still image stored using “Set
display”.
. . . . For sending a Chara-den image selected by “Substitute image”. (See
page 83)
(Displayed only when “Substitute image” has been selected in step 1.)
Phone/Video-phone
87
Function Menu of the Image Selection Display
Function menu Operation Explanation
Change setting
If you have selected “Original”
Select a folderSelect a still image.
p
Press l( ) to play back a demo to
check the still image.
If you have selected “Chara-den”
Select a Chara-den image.
p
Press l( ) to play back a demo to
check the Chara-den image.
You can change the setting for “Original” or
“Chara-den”.
p
You cannot operate while selecting
“Pre-installed”.
p
See page 296 for settable still images.
Set by Call
You can set an image to be sent to the other party for making a video-phone call.
Enter a phone number
1
or
bring up the detailed display of a Phonebook entry, redial item, dialed call
record, or received call record.
i
()Select imageMe or Chara-den
2
p
The setting is completed when you select “Me”.
p
To cancel the setting by call, select “Release”. The setting is completed.
Select a Chara-den image.
3
Voice Call Auto Redial
<>
Redialing as a Voice Call when a Video-phone Call cannot be Connected
Setting at purchase OFF
If a video-phone call cannot be connected, it will be automatically redialed as a voice call.
m
VideophoneVoice call auto redialON or OFF
1
Information
p
The charges for calls once switched to voice calls are billed at the rates for the voice calls.
p
“Voice call auto redial” does not work when a video-phone call cannot be connected such as when the line is busy or the
other party’s phone is in Public Mode (Drive Mode).
Phone/Video-phone
88
Notify Switchable Mode
<>
Setting for Switching between a Voice Call and a Video-phone Call
You can let the other party know that your FOMA phone can switch between a voice call and video-phone call.
This function is set to “Indication ON” at the time of contract. When “Notify switchable mode” is set to
“Indication ON”, the caller can switch between the video-phone call and voice call.
p
You cannot operate “Notify switchable mode” when you are out of the service area or radio waves do not reach, or during a
call.
m
1
Do the following operations.
Item Operation Explanation
Indication ON
Indication OFF
Check indication
Video-phone while Packet
<>
VideophoneNotify switchable mode
YESOK
YESOK
p
After checking, select “OK”. You can check the setting of the function.
−
−
Selecting Response to Incoming Video-phone Calls during i-mode
Setting at purchase V-phone priority
You can select how to deal with an incoming video-phone call which comes in during packet communication
such as i-mode or mail sending/receiving.
m
1
V-phone priority
Packet downld priority
V-phone answerphone
Call forwarding
Information
p
If you have not signed up for Voice Mail Service or Call Forwarding Service or you have not set it to “Activate”, “Packet
downld priority” works even if you set to “V-phone answerphone” or “Call forwarding”.
Incoming callV-phone while packetSelect an item.
. . . . . . . . . . Shows the Video-phone Call Receiving display. When you answer the video-phone
call, packet communication is disconnected.
. . . . Rejects the video-phone call and continues the communication.
. . . . Connects the incoming video-phone call to the Voice Mail Service Center.
. . . . . . . . . . Forwards the incoming video-phone call to the forwarding destination.
Phone/Video-phone
89
Connecting FOMA Phone to External Devices to Use Video-phone Function
You can operate your FOMA phone from an external device such as your personal computer for making or
receiving video-phone calls by connecting them using the FOMA USB Cable (option).
To use this function, you need to install a video-phone application program on a dedicated external device or
personal computer, and further, you need to prepare equipment (commercial) such as an earphone/
microphone or USB compatible web camera.
p
You cannot use this function while the FOMA phone is not connected to an external device.
p
For operating environments for a video-phone application program and how to set or operate it, refer to the instruction
manual or other literature for an external device.
p
You can use “
supports this function. Download it from the DoCoMo Video-phone Software web site.
(Browse to the support web page for the details such as operating environment for the personal computers.)
http://videophonesoft.nttdocomo.co.jp/
Information
p
You cannot make a video-phone call from the external device during a voice call.
p
When you have signed up for Call Waiting Service, an incoming video-phone call from an external device during a voice
call is recorded as a missed call in Received Calls. The same applies for an incoming voice call, video-phone call, and 64
data communication during a video-phone call from an external device.
Remote Monitoring
<>
ドコモテレビ電話ソフト
2005 (DoCoMo Video-phone Software 2005)” for the application program that
(Japanese only)
FOMA video-phone
connection speed
64K or 32K
Base station
FOMA
network
Checking inside the Room when You are Out
You can use the inside camera of the FOMA phone as a monitoring camera to observe the remote location from
a phone that has the video-phone function based on 3G-324M. While “Remote monitoring” is set to “ON”, the
FOMA phone automatically starts Remote Monitoring when it receives a video-phone call from a phone number
stored as “Other ID” of “Remote monitoring”.
(The FOMA phone needs to be set open.)
m
1
Enter your Terminal Security CodeDo the following operations.
Item Operation Explanation
Other ID
Setting at purchase
Not recorded
Other ID List
Phone/Video-phone
90
VideophoneRemote monitoring
<Not recorded>
Enter a phone number.
p
To change, select the stored phone
number.
p
You can enter up to 26 digits by using
numerals, #,
:
, or +.
You need to store in advance the phone
number from which the location is remotely
observed. You can store up to five phone
numbers.
Item Operation Explanation
Ring time
Setting at purchase
Set
Setting at purchase
5 seconds
OFF
Enter a ring time (seconds).
p
Enter from “003” through “120” in three
digits.
ON or OFF
ON
. . . .Automatically answers to start
Remote Monitoring after the set ring
time. (You cannot select “ON” when
“Other ID” is not stored.)
OFF
. . . Performs usual answering operation
for video-phone calls.
You can set the time until Remote Monitoring
starts after receiving a video-phone call.
p
You cannot set the same ring time for
Remote Monitoring, Automatic Answer and
Record Message Setting. Set different time
for each.
You can set whether to activate Remote
Monitoring for when receiving video-phone
calls from the phone numbers stored as
“Other ID”.
p
“ ” is displayed while this function is set
to “ON”.
p
You cannot set to “ON” in Manner Mode.
The message telling that the Remote
Monitoring in Manner Mode is disabled
appears.
Function Menu of the Other ID List
Function menu Operation Explanation
Look-up address
Delete this
Delete all
Select an item.
Phonebook
Dialed calls
Received calls
. . . . .Call up a Phonebook
. . . . .Select a phone number
YES
YES
entry and select a phone
number.
and press
. . .Select a phone number
and press
Oo
().
Oo
().
You can call up a phone number in the
Phonebook, Dialed Calls, or Received Calls
to enter it.
p
If you delete all Other IDs, “Remote
monitoring” is set to “OFF”.
Remote-monitored by Video-phone
A video-phone call comes in from a stored phone number.
1
p
The ring tone for Remote Monitoring sounds. (You cannot change the ring tone for
Remote Monitoring.)
The ring tone sounds at the volume set for “Videophone” of “Ring volume”, but at “Level
2” if you have set “Step”, “Level 1” or below. The flickering color is “Gradation”, and its
flickering pattern is “Standard”, regardless of the Illumination setting.
p
When a remote monitoring call comes in, “Open phone” is disabled.
p
You can press t or d to answer the video-phone call before automatic answering
and send the image through your camera to the other party. If you press
the video-phone call will start by sending the substitute image to the other party.
p
If you press h when a remote monitoring call comes in, the call will be cut and
Remote Monitoring will not start.
p
To make a remote monitoring call, notify your caller ID and make a video-phone call. If
the caller ID is not notified, Remote Monitoring will not start and the call will be treated as
an ordinary incoming video-phone call.
Oo
Phone/Video-phone
(),
91
The call is taken automatically after the ring time set for “Remote monitoring”,
2
and Remote Monitoring begins.
The image through your camera and sound will be sent. (You cannot switch to a substitute
image.)
p
The image through the caller’s camera appears on the display and the sound is played
back from the speaker.
p
You cannot set Voice-only Remote Monitoring.
p
During Remote Monitoring, the receiving end cannot operate anything other than
pressing
h
to end Remote Monitoring.
End Remote Monitoring.
3
Remote Monitoring ends when either the calling end or receiving end presses h.
Information
p
You cannot be remote-monitored during Manner Mode and Public Mode (Drive Mode).
p
When Remote Monitoring is set to “ON” and a video-phone call comes in from “Other ID”, Remote Monitoring starts after
the set ring time, even when “Ring time”, “Automatic answer”, or “Record message setting” is set and regardless of their
ring times.
p
When Remote Monitoring is not performed, it is recorded in Received Calls as a missed video-phone call.
p
If the Flat-plug Earphone/Microphone with Switch (option) is connected when a remote monitoring call comes in, the ring
tone will sound from both the earphone and the speaker, even when “Earphone” of “External option” is set to “Earphone”.
p
You cannot put incoming remote monitoring calls on hold.
p
If you set both Call Forwarding Service and Remote Monitoring, and give priority to Remote Monitoring, set its ring time
shorter than that for Call Forwarding Service.
p
To use Call Forwarding Service for Remote Monitoring, store the phone number of dialing side as “Other ID” and set a
3G-324M video-phone as the forwarding destination.
p
You may be imposed punishment according to the law and rule (such as the nuisance prevention
ordinance) if you use the FOMA phone to give a remarkable nuisance and misdeed to the public.
Please be considerate of the privacy of individuals around you when taking and sending photos
using camera-equipped mobile phones.
Phone/Video-phone
92
PushTalk
What is PushTalk? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Making a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Add a Member during PushTalk Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Receiving a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Storing in PushTalk Phonebook . . . . . . . . . . . . . . . . . . . . . . . ‹Store in PushTalk Phonebook› 99
Making a PushTalk Call Using PushTalk Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Deleting PushTalk Phonebook Entries . . . . . . . . . . . . . . .‹Delete from PushTalk Phonebook› 102
Making Full Use of PushTalk Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Setting PushTalk Calling/Receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
93
What is PushTalk?
You can communicate with multiple persons (up to five persons including yourself); press the PushTalk key to access
the PushTalk Phonebook, select the persons you want to talk with, and press the PushTalk key.
You are charged a communication fee each time you press the PushTalk key to talk. You can talk only while you are
pressing the PushTalk key, and the members other than you can do nothing but listen to you for that duration. You
can check the display for the state of members such as who is talking.
This function is convenient for communicating within a group or for a short communication simultaneously.
p
Compatible models . . . . . 902i series, 902iS series, 903i series, SO902iWP+, SH902iSL, N902iX HIGH-SPEED, N902iL,
During communication using the following models
※
903i series, SH703i, SO703i
Talk between two persons
Caller
Talk while pressing
the PushTalk key
■
PushTalk Plus
PushTalk Plus is the service that enables you to communicate with up to 20 persons including yourself by using the
Phonebook that has been registered on the network. In addition, you can check PushTalk member’s state, so this service
makes PushTalk more convenient. You need to subscribe to PushTalk Plus separately to use it.
p
For details such as how to operate PushTalk Plus, refer to the booklet which is supplied at subscription.
P702i, P702iD, SH702iS, SH703i, SO703i
Hello!
Receiver
※
, you can add members or call up members who have not participated:
Talk with multiple persons
Dial
Caller
I’m coming soon.
Talk while pressing
the PushTalk key
Receiver
Receiver
Receiver
Receiver
94
PushTalk
Making a PushTalk Call
Enter the other party’s phone number
1
When you are dialing, a confirmation tone for starting a PushTalk call sounds for a few
seconds, and then the same ring tone as with the voice (video-phone) call sounds.
p
“ ” blinks at the upper part of the display when you are making a PushTalk call and
lights during communication.
p
You can make a group call for multiple persons using the PushTalk Phonebook.
(See page 99 and page 101)
p
See page 55 for the Function menu while entering a phone number.
p
When the other party answers, talk while pressing p.
2
Press
h
3
A tone to notify the disconnection of communication sounds at the other end.
p
When there are any other members who you are calling up during group communication, the confirmation display
appears asking whether to end the communication.
Information
p
The talker is charged a communication fee from when he/she presses p and the talker’s right obtained tone sounds.
p
Emergency calls 110/119/118 are not available from PushTalk.
p
The duration you can talk per talker’s right is limited. The talker’s right release notice tone sounds before the limited time
arrives, and the talker’s right is released. In addition, the PushTalk communication itself ends when no one gets the
talker’s right in a certain period of time.
p
If you make a PushTalk call notifying your phone number, the phone numbers of all the members are notified to all the
members who have received the call. The phone number is important information, so take utmost care when you notify it.
p
If you make a PushTalk call during i-mode, i-mode communication is disconnected.
.
When the other party answers, a confirmation tone for starting communication sounds.
p
When you get the talker’s right, the talker’s right obtained tone sounds. The other party
hears your voice only while you are pressing
release
p
p
You cannot get the talker’s right and an error tone sounds even if you press p when
another member has it.
p
Just after purchase, Hands-free is automatically activated during communication as
“Hands-free w/ PushTalk” has been set to “ON”. (See page 104) However, Hands-free is
deactivated during Manner Mode regardless of “Hands-free w/ PushTalk”.
p
Press l( ) to add a member. Go to step 1 on page 97.
p
The FOMA phone works according to “Setting when folded” if you close it during
communication. (See page 74)
, the talker’s right is released, and a confirmation tone sounds.
p
and having the talker’s right. When you
to end the communication after talking.
Function Menu during PushTalk Communication
Function menu Operation Explanation
Add member
Set. when folded
Go to step 1 on page 97. You can add a member during PushTalk
communication.
See page 74. You can set how the FOMA phone works
when it is closed.
PushTalk
95
■
Making/Receiving a PushTalk group call
You can use the PushTalk Phonebook or Redial/Dialed Calls/Received Calls to communicate with multiple members.
While making or receiving a PushTalk group call, the group name and the members in the group are displayed.
Press
No
to confirm other members. When a call is received with the other party’s phone number not provided, “User
unset” is displayed.
■
Display while dialing/communicating
During group
communication
■
Re-participating or participating midway in PushTalk communication
After you finish PushTalk communication or when you cannot answer to a PushTalk call, you can use a received call record
to make a PushTalk call to re-participate or participate midway in the communication so long as the PushTalk
communication continues among other members. If the PushTalk communication among other members has already been
finished, your call is dialed as a new PushTalk call.
p
The phone number of the member who has the talker’s right is displayed, and the state of the
talker’s right is displayed in color of the round icon at the upper left. When the name of that
member, phone number, and image are stored in the Phonebook, his/her name and image are
displayed. However, when you cannot receive a member’s information correctly, “?” is
displayed.
When the FOMA phone is closed, the phone number (name) of the member who has the
talker’s right is displayed on the Private window.
Color of the round icon
at the upper left
Blue Calling
Green You can get the talker’s right.
Blinking in green You have the talker’s right.
Blinking in yellow Another member has the talker’s right.
Blinking in green and red
p
The state of members is shown by icons during dialing or communicating.
(Characters other than shown below might appear.)
Icon State of members
※
※
※
※
Displayed only for the PushTalk communication among three or more members.
p
The number of times you have got the talker’s right is the total of the number of and the
number shown in . When 999 times are exceeded, the counting is reset to 0.
The talker’s right will be released automatically in a few seconds
because it has long been retained (A release notice tone sounds).
Calling
Has participated in the PushTalk call.
Does not answer, has ended the PushTalk call, out of the service area,
or the power is off.
Has activated Public Mode (Drive Mode).
State of the talker’s rights
96
PushTalk
Add a Member during PushTalk Communication
You can make a PushTalk call to another member during PushTalk communication and add that member to the
communication.
You can add a person to the members by accessing the PushTalk Phonebook, Phonebook, or Dialed Calls/
Received Calls, or by directly entering a phone number.
You can add up to five members (including yourself), and can repeat adding up to that number.
p
Members can be added from the calling end only.
p
You can add members who use the PushTalk mobile phones which do not have this function.
p
The added members are not recorded in Dialed Calls/Redial.
During PushTalk communication
l
()Do the following operations.
1
Item Operation Explanation
View PushTalk PB
View phonebook
Direct input
View call records
Information
p
Even the calling end cannot add members if he/she uses a PushTalk mobile phone which does not have this function.
p
For a member who uses a PushTalk mobile phone which does not have this function, the members added during
PushTalk communication are not shown and a confirmation tone does not sound for their participation.
See page 101.
Instead of pressing
call.
p
Press i( ) and select “Member/
Group” to switch between the PushTalk
Phonebook List and PushTalk Group List.
Call up a Phonebook entryHighlight a
phone number and press
Enter a phone numberl()
Dialed calls or Received callsSelect a
record
l
()
p, press l()
l
().
Select a phone number
You can call up a PushTalk Phonebook entry
to make a PushTalk call.
to
You can call up a Phonebook entry to make a
PushTalk call.
You can enter a phone number to make a
PushTalk call.
You can call up Dialed Calls/Received Calls
to make a PushTalk call.
PushTalk
97
Receiving a PushTalk Call
When a PushTalk call comes in, “PushTalk call” is displayed, the ring tone sounds, and the
1
Call/Charging indicator flickers.
p
“PushTalk group call” is displayed for an incoming group call.
p
Information is displayed on the Private window during ringing.
p
To reject a call, press i( ) during ringing and select “Call rejection”.
You can reject the call also by pressing
Press p to answer a PushTalk callTalk while pressing p.
2
■
Any Key Answer
When answering a PushTalk call, you can press any key of t,0 through 9,a,r,l,c,Bo, and
<
besides p,d, and Oo( ) to enter communications mode.
p
When “Answer setting” is set to “Quick silent”, you can stop only the ring tone by pressing a key.
Press
h
to end the communication after talking.
3
A tone for confirming the end of communication sounds at the other end.
p
When the call is a group call, the PushTalk communication itself continues even if you press h, and the icon
indicating that you are not participating appears on each member’s display and a confirmation tone sounds.
However, when all the members exit or the caller ends the PushTalk communication, the PushTalk communication
itself ends.
Information
p
The talker is charged a communication fee from when he/she presses p and the talker’s right obtained tone sounds.
p
The duration you can talk per talker’s right is limited. The talker’s right release notice tone sounds before the limited time
arrives, and the talker’s right is released. In addition, the PushTalk communication itself ends when no one gets the
talker’s right in a certain period of time.
p
You cannot use “On hold” or “Holding” function for PushTalk.
p
A PushTalk call that comes in during a voice call, a PushTalk call that comes in during Public Mode (Drive Mode), and a
voice call (when “PushTalk arrival act” is set to other than “Answer”), a video-phone call, data communication, or a
PushTalk call that comes in during PushTalk communication are recorded as missed calls in Received Calls.
p
You can answer also by pressing d or Oo( ) instead of pressing p. You can
answer by pressing
p
When you get talker’s right, the talker’s right obtained tone is played back. The other
party hears your voice only while you are pressing
When you release
p
You cannot get the talker’s right and an error tone sounds, even if you press p when
another member has it.
p
“Open phone” and “Record message setting” become invalid.
p
Just after purchase, Hands-free is automatically activated during communication as
“Hands-free w/ PushTalk” has been set to “ON”. (See page 104) However, Hands-free is
deactivated during Manner Mode regardless of “Hands-free w/ PushTalk”.
p
The FOMA phone works according to “Setting when folded” if you close it during
communication. (See page 74)
p
with the FOMA phone closed as well.
p
, the talker’s right is released and a confirmation tone sounds.
h
.
p
and having the talker’s right.
98
PushTalk
Loading...