Follett VU300M20DL User Manual
VU300 series – dual side
Integral
beverage
cooling
without
Standard with Cornelius UFB1 valves.
Lancer LEV valves available for Coke users only (add -LAN to end of model number).
1 External beverage cooling required by others.
2 Dispenser can be rotated for left or right ice tower location.
# of
valves Sides
20
1
24
Ice
tower
location Valve type Item number
N/A
N/A
2
2
lever
push-button
lever
push-button
double
sided
double
sided
VU300M20DL
VU300M20DP
VU300M24DL
VU300M24DP
™
Vision
ice and beverage dispenser
VU300 Series dual side
Features
Dual-sided to double throughput – the ultimate high capacity
island configuration
300 lb (136.2 kg) undercounter ice storage
Upscale drink station
- low profile with ice storage under the counter
®
- auto-fill with an ice machine out of view using RIDE
remote ice
delivery equipment
- ideal for island configurations
- fits into ADA compliant 34.00" (86.4 cm) counters
Optimized throughput with left or right side icedispense chute –
customers fill cups faster for shorter lines
Durable, full stainless exterior
Easier beverage connections
- beverage valves with factory installed beverage lines for easy
field connection
- four center valves configured as QuickCARB
™
valves,
individually changeable from carbonated to non-carbonated
flavors without disconnecting water lines
Pre-configured for Follett® RIDE model Chewblet® ice machines
- connect up to two Follett ice machines
- user-preferred, chewable compressed nugget ice
- slow melting, maintains drink temperature
- accepts Chewblet ice or Micro Chewblet™ ice
Faster, safer manual loading of ice at waist height
- safe, easy waist-height loading front or rear
- eliminates overhead lifting of buckets or loading from ladders
- allows quick reloading during serving period with
minimaldisruption
- may be manually loaded with cube ice up to
1.00" (2.54 cm) square
Accessories
4.00" (10.16 cm) stainless steel leg (individual) adjustable to
6.75"(17.14 cm) (item# 00137257)
Integration kit – Required to integrate with Ice Manager
(item# VUIMDVKIT)
™
diverter valve
Job
Item
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
Specification
C6
C6
K1
K1
C4
W
H4
D1
C1
C5
8.50"
(21.59 cm)
C2
C3
C3
2.75"
(6.98 cm)
15.00"
(38.1 cm)
L1
L2
H1
H2
H3
D2
Side opposite
ice dispense Ice dispense side
J6
Ice storage capacity 300 lb (136.2 kg)
W Width 20 valve models - 40.88" (103.8 cm)
24 valve models - 43.88" (111.5 cm)
D1 Depth 32.38" (82.2 cm)
D2 Depth, drain pan interior 9.38" (23.82 cm)
H1 Height, upper section 25.25" (64.1 cm)
H2 Height, lower section 29.50" (74.9 cm)
H3 Height, leg 4.00" to 6.75" (10.16 to 17.15 cm)
adjustable legs
H4 Ice dispense height clearance 10.88" (27.6 cm)
K1 Ice dispense chute water and drain connections are
on same side as ice dispense chute,
electric connections are opposite ice
dispense chute, beverage lines can
be routed to either side
L1 Countertop to lever 8.62" (21.89 cm)
L2 Front of dispenser to lever 9.25" (23.50 cm)
Installation clearance 60.00" (152.4 cm) above counter for
drop-in installation, 1.25" (3.18 cm)
maximum counter thickness
Service clearance
NOTE: For additional information
refer to form# 3105.
C1 Electrical
115 V/60/1
C2 Drain - ice storage 3/4" FPT drain - supplied with
C3 Drain - drain pan 3/4" drain nipple
C4 Beverage lines 1/4" ID syrup beverage hose, 3/8"ID
C5 Ice machine electrical
connection
C6 Ice machine ice transport tube
connection
Approximate shipping weight 420 lb (191 kg)
NOTE: For indoor use only
12.00" (30.5 cm) minimum on
ice transport tube entry side for
connections, 49.00" (124.5 cm)
minimum above counter for
augerremoval
8 amps. 15 amp circuit.
8'(2.4 m) cord and NEMA 5-15 90º
plug provided with each dispenser.
Separate circuits and disconnects
required for each dispenser.
airbreak
carbonated water beverage hose,
3/8" ID plain water beverage hose
Pre-wired bin signal junction box
with twist lock connector(s).
Standard length is 20' (6.1 m).
two ice transport tube entry holes
on each side (can enter either side)
Dimensional drawing
Counter cutout detail
ice dispense side
J1
J2
J3
J5
J4
SHORT FORM SPECIFICATION: Ice and beverage dispenser to be Follett model
_________. Dispenser to store up to 300lb(136.2 kg) of ice and to have doublesided beverage rail, two ice chutes and (choose one) ___ twenty (20) or ___ twentyfour (24) Cornelius UFB1 valves on each side. Full-length drain pans to be one-piece
molded polyethylene. Dispenser to allow loading ice at waist level from front or
rear. Beverage rail to be of stainless steel with plastic trim. Beverage manifold to
be pre-plumbed with center four valves individually changeable from carbonated
to non-carbonated flavors without disconnecting water lines. To include 4.00" to
6.75" (10.16 to 17.14 cm) adjustable legs for dispenser support. Storage area to
be of polyethylene, insulated with non-CFC foam polyurethane. Electric keyswitch
standard. Dispenser to be pre-configured to accept up to two _________ RIDE
model ice machines, sold separately. 8' (2.4 m) cord and NEMA 5-15 90º hospitalgrade plug provided. NSF, UL and cUL listed.
Form #2800 06/16
© Follett LLC
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
J1 Cutout depth 30.375" (77.152 cm) ± .0125" (.0317cm)
J2 Cutout width 38.50" (97.79 cm) ± .0125" (.0317 cm)
J3 Cutout width,
42.50" (107.95 cm) ± .0125" (.0317 cm)
bump-out
J4 Cutout depth,
7.125" (18.097 cm) ± .0125" (.0317 cm)
bump-out
J5 Flat surface
required
20 valve - 43.875" (111.442 cm) W x
33.00" (83.82 cm) D, 24 valve - 49.875"
(126.682cm) W x 33.00 (83.82 cm) D
J6 Optional – counter front may be removed for
slide-in installation
Ice Manager, Micro Chewblet, QuickCARB and Vision are trademarks of Follett LLC.
Chewblet, Follett and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may
vary depending on country oforigin.
Loading...