Follett VU300B10RL User Manual

VU300 series – single side

Integral
beverage
cooling

with

Standard with Cornelius UFB1 valves.
Lancer LEV valves available for Coke users only (add -LAN to end of model number).

# of
valves Sides

8

10

Ice
tower
location Valve type

left

single
sided

right

left

single
sided

right

lever
push-button
lever
push-button
lever
push-button
lever
push-button

Item number
VU300B8LL

VU300B8LP
VU300B8RL
VU300B8RP
VU300B10LL
VU300B10LP
VU300B10RL
VU300B10RP

™

Vision

ice and beverage dispenser

VU300 Series single side

Features

300 lb (136.2 kg) undercounter ice storage
Upscale drink station

- low profile with ice storage under the counter

- auto-fill with an ice machine out of view using RIDE® remote ice
delivery equipment

- ideal for island configurations

- fits into ADA compliant 34.00" (86.4 cm) counters

Optimized throughput with left or right side icedispense chute –
customers fill cups faster for shorter lines

Integral ice-water-bath beverage cooling option located behind
beverage valves – delivers cold, high quality beverages and
excellent casual drink performance

Durable, full stainless exterior
Easier beverage connections

- beverage valves with factory installed beverage lines for easy
field connection

- four center valves configured as QuickCARB™ valves,
individually changeable from carbonated to non-carbonated
flavors without disconnecting water lines

Pre-configured for Follett® RIDE model Chewblet® ice machines

- connect up to two Follett ice machines

- user-preferred, chewable compressed nugget ice

- slow melting, maintains drink temperature

- accepts Chewblet ice or Micro Chewblet™ ice

Faster, safer manual loading of ice at waist height

- safe, easy waist-height loading front or rear

- eliminates overhead lifting of buckets or loading from ladders

- allows quick reloading during serving period with
minimaldisruption

- may be manually loaded with cube ice up to

1.00" (2.54 cm)square

Job
Item

Accessories

4.00" (10.16 cm) stainless steel leg (individual) adjustable to

6.75"(17.15 cm) (item# 00137257)

Integration kit – Required to integrate with Ice Manager
(item# VUIMDVKIT)

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

™

divertervalve

Specification

J2

Ice storage capacity 300 lb (136.2 kg)

W Width 40.88" (103.8 cm)
D1 Depth 32.38" (82.2 cm)
D2 Depth, drain pan interior 9.38" (23.83 cm)
H1 Height, upper section 25.25" (64.1 cm)
H2 Height, lower section 29.50" (74.9 cm)
H3 Height, leg adjustable 4.00 - 6.75"

(10.16 - 17.14 cm)

H4 Ice dispense height clearance 10.88" (27.6 cm)
K1 Ice dispense chute utility connections are on same side

as ice dispense chute

L1 Countertop to lever 8.62" (21.89 cm)
L2 Front of dispenser to lever 9.25" (23.50 cm)

Installation clearance 60.00" (152.4 cm) above counter for

drop-in installation, 1.25" (3.18 cm)
maximum counter thickness

Service clearance
NOTE: For additional information
refer to form# 3105.

C1 Electrical
115 V/60/1

C2 Drain - ice storage 3/4" FPT – supplied with air break
C3 Drain - beverage water-bath 1/2" ID hose
C4 Drain - drain pan 3/4" drain nipple
C5 Beverage lines 1/4" ID syrup beverage hose, 3/8"ID

C6 Ice machine electrical

connection

C7 Ice machine ice transport tube
connection

Approximate shipping weight 400lb (182 kg)
NOTE: For indoor use only

SHORT FORM SPECIFICATION: Ice and beverage dispenser to be Follett model
_________. Dispenser to store up to 300lb(136.0 kg) of ice and allow loading of ice
at waist level from front. Full-length drain to be one-piece molded polyethylene.
Beverage rail to have (choose one) ___ eight (8) or ___ten(10) Cornelius UFB1
valves. Beverage rail to be of stainless steel with plastic trim. Beverage manifold
to be pre-plumbed with center 4 valves individually changeable from carbonated
to non-carbonated flavors without disconnecting water lines. To include 4.00 -

6.75" (10.16-17.15cm) adjustable legs for dispenser support. Storage area to be
of polyethylene, insulated with non-CFC foam polyurethane. Electric keyswitch
standard. Dispenser to be pre-configured to accept up to two _________ RIDE
model ice machines, sold separately. 8' (2.4 m) cord and NEMA 5-15 90º hospital
grade plug provided. NSF, UL and cUL listed.

12.00" (30.5 cm) minimum on
ice transport tube entry side for
connections, 49.00" (124.5 cm)
minimum above counter for auger
removal

7amps. Dispenser 15 amps circuit.
8'(2.4 m) cord and NEMA 5-15 90º
plug provided with each dispenser.
Separate circuits and disconnects
required for each dispenser.

carbonated water beverage hose,
3/8" ID plain water beverage hose

Pre-wired bin signal junction box
with twist lock connector(s).
Standard length is 20' (6.1 m).

two ice transport tube entry holes
on each side (can enter either side)

Dimensional drawing

D1

W

C7

C4

C2

C7

D2

K1

H4

L1

8.50"

(21.59 cm)

2.00"

(5.08 cm)

L2

15.00"

(38.1 cm)

Counter cutout detail

J1

J3

J4

J1 Cutout depth 30.375" (77.152 cm) ± .0125"

(.0317 cm)

J2 Cutout width 38.5" (97.79 cm) ± .0125"

(.0317cm)

J3 Flat surface

required

J4 Optional – counter front may be removed for

slide-in installation

40.875" (103.822 cm) W x

33.00" (83.82 cm) D

H1

H2

H3

2.75"

(6.98 cm)

C5
C3
C6

C1

Form #2795 06/16
© Follett LLC

Ice Manager, Micro Chewblet, QuickCARB and Vision are trademarks of Follett LLC.
Chewblet, Follett and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary
depending on country oforigin.

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com