Follett VU155N0RP, VU155N0RL, VU155N0LP, VU155N0LL Specifications

VU155N series

Ice
tower
location Valve type

left

right

lever
push-button
lever
push-button

Item number

VU155N0LL
VU155N0LP
VU155N0RL
VU155N0RP

™

Vision

VU155N Series ice and water dispenser

Features

150 lb (68 kg) undercounter ice storage
Upscale drink station

- low profile with ice storage under the counter

- auto-fill with an ice machine out of view using RIDE® remote ice
delivery equipment

- ideal for island configurations

- fits into ADA compliant 34.00" (86.4 cm) counters

Left or right side icedispense chute
Durable, full stainless exterior
Pre-configured for Follett® RIDE model Chewblet® ice machines

- connect up to two Follett ice machines

- user-preferred, chewable compressed nugget ice

- slow melting, maintains drink temperature

- accepts Chewblet ice or Micro Chewblet™ ice

Faster, safer manual loading of ice at waist height

- safe, easy waist-height loading front or rear

- eliminates overhead lifting of buckets or loading from ladders

- allows quick reloading during serving period with
minimaldisruption

- may be manually loaded with cube ice up to 1.00" (2.54 cm)
square or Chewblet ice

Job
Item

Accessories

6.00" (15.24 cm) stainless steel leg kit (set of 4) adjustable to

9.00" (22.86 cm) (item# AFLEGKT155)

No standard configuration to integrate with IMDV-2. Contact

factory for options.

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Specification

J2

Ice storage capacity 150 lb (68 kg)

W1 Width 31.25" (79.4 cm)
W2 Width, tower 11.75" (29.8 cm)
D1 Depth 27.38" (69.5 cm)
D2 Depth, drain pan interior 7.38" (18.74 cm)
D3 Depth, tower 16.50" (41.9 cm)
H1 Height, upper section 22.00" (55.9 cm)
H2 Height, lower section 27.88" (70.8 cm)
H3 Height, leg adjustable 6.00" - 9.00"

(15.24 - 22.86 cm)

H4 Ice dispense height clearance 10.00" (25.4 cm)
K1 Ice dispense chute utility connections are on opposite

side of ice dispense chute

L1 Countertop to lever 8.25" (20.96 cm)
L2 Front of dispenser to lever 7.50" (19.05 cm)

Installation clearance 51.00" (129.5 cm) above counter for

drop-in installation, 1.25" (3.18 cm)
maximum counter thickness

Service clearance
NOTE: For additional information
refer to form# 3105.

C1 Electrical
115 V/60/1

C2 Drain - ice storage 3/4" PVC slip joint
C3 Water inlet 3/8" tubing
C4 Drain - drain pan 3/4" PVC hose
C5 Ice machine electrical

connection

C6 Ice machine ice transport tube
connection

C7 Air Break do not connect to drain system
Approximate net weight 200 lb (91 kg)
Approximate shipping weight 231 lb (105 kg)
NOTE: For indoor use only

12.00" (30.5 cm) minimum on
side opposite of ice chute, 36.00"
(91.4cm) minimum above counter
for auger removal

2.4 amps. 8' (2.4 m) cord and
NEMA 5-15 90º plug provided with
each dispenser. Separate circuits
and disconnects required for
eachdispenser.

Pre-wired bin signal junction box
with twist lock connector(s).
Standard length is 20' (6.1 m).

two ice transport tube entry holes
on each side

Dimensional drawing

D1

D2

C6

C3

C4

C2

C1

L2

C5

15.24 cm

7.32 cm
(2.88")

8.89 cm
(3.50")

47.0 cm
(18.50")

C7

Counter cutout detail

J1

D3

K1

L1

(6.00")

W1

W2

H1

H2

H3

H4

C6

J3

SHORT FORM SPECIFICATION:

_________. Dispenser to store up to 150lb (68 kg) of ice and allow loading of ice
at waist level from front or rear. Ice and water tower and top to be of stainless
steel with plastic trim. Full-length drain pan to be one-piece molded polyethylene.
To include 6.00" - 9.00" (15.24 - 22.86 cm) adjustable legs for dispenser support.
Storage area to be insulated with CARB compliant non-HFC foam. Dispenser to
be pre-configured to accept up to two RIDE model ice machines, sold separately.
8'(2.4 m) cord and NEMA 5-15 90º hospital grade plug provided. Dispenser NSF,
UL, and cUL listed.

Ice and water dispenser to be Follett model

VU155N series

801 Church Lane | Easton, PA 18040, USA

2790-201912 | © Follett LLC

1.800.523.9361 | 1.610.252.7301 | follettice.com

J4

J1 Cutout depth 26.25" (66.68 cm) ± .0125"

(.0317cm)

J2 Cutout width 30.375" (77.152 cm) ± .0125"

(.0317cm)

J3 Flat surface

required

31.25" (79.375 cm) W x

28.00" (71.12 cm) D

J4 Optional – counter front may be removed for

slide-in installation

MICRO CHEWBLET and VISION are trademarks of Follett LLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary
depending on country oforigin.