Ice
Production Ice type V/Hz/Ph Item number
425 lb
(193 kg)
† ENERGY STAR® certified
Micro Chewblet™115/60/1
Flake 115/60/1
UMD425A80†
UFD425A80
Maestro Plus
™
ice machine bin
425 series for foodservice applications
Features
Up to 425 lb (193 kg) of production and 75lb (34 kg) of
storage capacity. Perfect for space limited facilities. Less than
24.00"(61.0cm) wide, the Maestro Plus ice machine bin will
provide the capacity you need in a smallfootprint.
- Undercounter application without the legs: 33.00" (83.8 cm)
tall unit will fit under standard counters. Teflon glides allow it
to slide easily into place.
- Freestanding: 39.00" (99.1 cm) tall with legs
Consumer-preferred Micro Chewblet ice (also available as
aflaker)
- preferred over cubes by more than 2:1
- easy to chew
- slow melting, maintains drink temperature and quality,
comparable to cubes
- higher displacement than cube ice
Flake ice is perfect for display
- securely supports salad bar containers without tipping
- cradles fish and vegetables without bruising
High performance Maestro Plus ice machines
- stainless steel evaporator, auger and top bearing
providesdurability
- oversized, heavy duty, tapered roller bearing ensures long
low-maintenance life
- semi-automatic cleaning cycle reduces maintenance costs
- regular flushing improves ice quality and reduces scale
Lower utility bills
- energy-ecient, no costly defrost cycles
- 25% less energy than comparable capacity cube machines
- 40% less water than comparable capacity cube machines
Designed for easy installation and service
- front ventilated - no side, top or back clearance required
- rear utility access allows for rear electrical and plumbing
connection with no rear clearance required
- bin and shroud may be removed for service and maintenance
Warranty
- 3 years parts and labor, 5 years compressor parts
1
Job
Item
1
Consumer study conducted by independent agency Roper ASW.
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com
Specification
Ice storage capacity 75 lb (34 kg)
W1 Width 23.50" (59.7 cm)
D1 Depth 26.00" (66.0 cm)
H1 Height with legs 39.00" (99.0 cm)
H2 Height without legs 33.00" (83.8 cm)
Service and ventilation clearance front ventilated -
no side, top or back
clearancerequired
Utility connection location back
C1 Electrical
115 V/60/1
C2 Potable water inlet 3/8" push in
C3 Drain 3/4" MPT when unit is installed
Air temperature 50 - 100 F (10 - 38 C)
Water temperature 40 - 90 F (4 - 32 C)
Potable water pressure 10 - 70 psi (69 - 483 kpa)
Ice production at
70 F (21 C) air and
50 F (10 C) water
Ice production at
90 F (32 C) air and
70 F (21 C) water
Energy consumption
90 F (32 C) air; 70 F (21 C) water
Heat rejection 5,000 BTU/hr
Water consumption 12.0 gal (45.4 L) of potable water
Approximate ship weight 194 lb (88 kg)
NOTE: For indoor use only. Designed for commercial use. Follett is not able
to provide in-house services for residential installations.
8 amps,
7' (2 m) cord, NEMA 5-15 plug
without legs, floor drain must be
within 6' (1.8 m)
0.7 Bar - 5 Bar max
425 lb (193 kg)
325 lb (147 kg)
5.4 kWh
per 100lb (45.4 kg) of ice
Dimensional drawing
W1
C2
6.42"
(16.30 cm)
C3
2.00"
(5.08 cm)
6.00"
(15.24 cm)
D1
H1
H2
C1
10.90"
(15.49 cm)
SHORT FORM SPECIFICATION:
Ice machine to be air-cooled and production to be approximately 425lb (193kg)
per day of ____________ Micro Chewblet or ____________ flake ice at air temp of
70F(21C) and water temp of 50 F (10 C). Ice storage capacity of up to 75 lb (34kg).
Ice machine to use environmentally responsible R404a refrigerant. Ice machine
to have stainless steel evaporator, auger, top bearings, heavy duty tapered roller
bearings, and low water safety circuit. NSF and ETL listed.
Ice machine to be Follett model number ____________.
Ice machine bin for foodservice
ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental
Protection Agency.
MAESTRO PLUS and MICRO CHEWBLET are trademarks of Follett LLC.
FOLLETT is a registered trademark of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may
vary depending on country of origin.
6785-201908 | © Follett LLC
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com