Follett IMDV2 Specifications

Chewblet ice machine

Ice Manager Control Panel

(1) Horizon Elite

(purchased seperately)

Ice Manager™diverter valve system

IMDV-2 series

Features:

The Ice Manager diverter valve system automatically delivers ice
from ONE Follett Horizon Elite™ ice machine to TWO separate
dispensers or bins. The system includes a control panel, diverter
valve, and components to connect two ice storage units chosen.

RIDE® remote ice delivery equipment

- deliver ice automatically through a tube to where you need it,
instead of manually transporting

- reduce handling to provide more sanitary ice and prevent
safety issues for employees and customers

- install ice machine and diverter valve up to 75' (22.8 m) away
from the bin

- create a more aesthetically appealing dining area with less heat
and noise around your customers

Flexibility with a wide choice of bins and dispensers

- Follett ice storage bins, Ice Transport Systems (ITS), and
Ice•DevIce

- Follett Vision™ low-profile ice and beverage dispensers and
Symphony Plus™ 110CM ice and water dispensers

- countertop ice and beverage dispensers manufactured by
others (see approved list on page 2)

- other ice storage containers (contact factory)

Ecient use of equipment

- fill two bins or dispensers with only one ice machine

- reduce the number of ice machines in your operation, or
eliminate manual filling

- keep one machine running more eciently instead of two
machines that may idle frequently

- service and maintain only one machine instead of two

Factory-arranged installation and start-up

- turn-key system installation with factory-trained installers

- full operational demonstration to end-user

Warranty

- 3 years parts and labor on all components

™

ice storage and dispensing systems

Job
Item

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Configuring the Ice Manager diverter valve system

1. Select Horizon Elite ice machine model

Using the model configuration table below, determine the Horizon Elite ice machine that will best suit your needs. For more specifications on
Horizon Elite ice machine models, see form# 7030, 7035, 8180 and 3311. Existing Horizon series ice machines may be retrofitted to integrate
with the Ice Manager diverter valve system. Based on model# and serial#, determine the retrofit kit to order using the table below.

Horizon Elite ice machine model: _______________________ serial# (if existing Horizon ice machine): _______________________

Horizon Elite 1010, 1410, 1810 and 2110 Series Ice Machine Model Number Configurations

for use with Ice Manager Diverter Valve System

Icemaker Voltage Series Condenser

HC Horizon
Chewblet

C 208-230/60/1 (icemaking head)

Self-contained only.

D 115/60/1 (icemaking head)

Self-contained and remote.

If remote unit, high side is
208-230/60/1.

F 115/60/1 (icemaking head)

Remote only. High side is

208-230/60/3.

A Air-cooled, self-contained

1010

W Water-cooled, self-contained

1410

R Air-cooled, remote condensing unit

1810

N Air-cooled, no condensing unit for

2110

connection to parallel rack system

2. Select two dispensers or bins to be filled

Choose two approved units for ice storage. If exact model is not
known, note type of unit. Lane 1 is the primary lane and should

be assigned to bin or dispenser with highest demand.

Lane 1: ___________________________________

Lane 2: ___________________________________

If desired unit is not listed below, contact factory.

Follett Ice Transport and Storage

New Follett ice storage bin or transport system model.
See form# 8590 for models. When ordering bin, specify bin top to be cut for

IceManager diverter valve system. If ice machine will be top mounted on bin,
see Step 3.

Existing Follett ice storage bin or transport system model.
Requires replacement top cut for Ice Manager diverter valve system.
Seeform# 4025 for item numbers. If ice machine will be top mounted on bin,

seeStep3.

Follett Symphony Plus Ice and Water Dispenser 110CM
Follett Vision Ice and Beverage Dispensers

New Follett Vision 155 and 300 ice and beverage dispenser model. VU155N

models are available via Special Quote Request (SQR).

See form# 4025 for models. Order Vision with VUIMDVKIT to be configured for

Ice Manager diverter valve system.

Existing Vision 155 serial# must be greater than B50001.
Existing Vision 300 serial# must be greater than B50005.

Ice and Beverage Dispensers

Coca-Cola Freestyle 9000
Coca-Cola Freestyle 7000
Coca-Cola Freestyle 9100
Cornelius ED/DF150 Series Lancer FS-22N Servend MD250
Cornelius ED/DF175 Series Lancer FS-30N Servend MDH302
Cornelius ED/DF200 Series Lancer FS-44N Servend MDH302
Cornelius ED/DF250 Series Lancer Sensation 30"/44" Servend MDH402
Cornelius ED/DF300 Series Lancer Touchpoint Servend SV175
Cornelius IDC215 Lancer Bevariety Servend SV200
Cornelius IDC255/Pro/Fast Gate Pepsi Spire 3.0/5.0/4.1
Cornelius Flavor Fusion/Overload Servend FRP-250

1

Consult with dispenser provider to be sure the dispenser is ready to dispense nugget ice.

2

Consult with Coca-Cola and Follett to qualify application prior to ordering.

 Requires DVF30 top kit ordered separately from Follett and top adapterkit 46412 and ice kit

46430, which must be ordered from Coca-Cola.
 Requires DVF26 top kit ordered separately from Follett.
 Approved only for Pepsi Spire 3.0, 5.0 and 4.1 designed for top mount ice machines. Requires

DVP22 top kit for 3.0 and DVP30 top kit for 5.0 and 4.1, ordered separately from Follett. For

manual fill versions of Pepsi Spire 3.0, 5.0 and 4.1, contact factory.

2

Form# 3265

1

2

2, 3

2, 4

Lancer 4500-22N Servend MD150
Lancer 4500-30N Servend MD175
Lancer FS-16N Servend MD200

5

Servend SV250

A M SC 1010HC

Horizon Series Retrofit Kits ¹

Horizon Model # Item #

Application Configuration

M Ice Manager S RIDE

(remote ice
delivery
equipment)

1000/1400/1650
after C43650

1000/1400A/W
prior to C43650

1000/1400R/N
prior to C43650

1010/1410/2110/1810 01116177

¹ Extra transport tubing may be required to

connect ice machine to diverter valve

00191965

00185181

00185272

3. Choose Horizon Elite series ice machine
mounting option

Mounting option: __________________________________

Wall Mount Bracket Item #

HCD1010/1410 and HCF1010/1410/2110 00997098
HCC1010 and HCC1410 01085455

Machine Stand Item #

HCC1010 and HCC1410 01085463
HCD1010/1410/1810/2110 and HCF1010/1410/1810/2110 00997080

Follett Bin - Top Mount

New bin, see form# 8590 for models.
When ordering bin, specify bin top to be cut for Ice Manager diverter valve

system and ice machine

Existing bin, see form# 4025 for bin top listing.
Requires replacement top cut for Ice Manager diverter valve system and

icemachine when ordering

Other

Specify what the Horizon series ice machine will be mounted on.

1

See drawings on page 3 for min. bin width and required clearances.

1

1

.

1

.

Ice Manager diverter valve system

Configuring the Ice Manager diverter valve system (Continued)

4. Evaluate site for location of equipment

Lane 1 and Lane 2 dispensers or bins

• Refer to dispenser or bin specifications for required clearances

• See drawings below for required clearances for Ice Manager
diverter valve system

Follett Horizon Elite ice machine

• 10' (3 m) maximum distance from Horizon Elite ice machine to
diverter valve

• See spec sheets 7030, 7035, 8180 and 3311 for utility
requirements anddimensions

Diverter valve

• 8' (2.4 m) maximum distance from diverter valve module to
electricoutlet

• 75' (22.8 m) maximum distance from diverter valve to Lane 1 and
Lane 2 dispensers or bins

• Drain required, 15' (4.6 m) drain tube provided

Control panel

• 30' (9.2 m) max. distance from control panel to diverter valve

5. Determine length of ice transport tubes

Lane 1: (approx. length): ____________________
Lane 2: (approx. length): ____________________
Use the following guidelines to determine length of the

icetransport tube run from the diverter valve to each bin
ordispenser.

• Length of ice transport tube from diverter valve module to each
dispenser or bin can be specified in 5' (1.5 m) increments from
10' - 75' (3.0 m - 22.8 m) ¹

• Maximum vertical rise of ice transport tube – 10' (3 m)

• Horizontal run should be pitched so that melt water drains back
todiverter valve module. Run must have 1⁄4" per foot pitch.

• No dips or traps in the tube run

¹ Lengths to include any bends and turns needed to connect components.

6. Site plan drawings

Installation may be performed by an authorized installer
contracted by Follett. Contact factory for details.

Required clearances for Ice Manager diverter valve system

Diverter valve

Front View

6.00" (15.24 cm)
clearance

mounting

bracket

12.00" (30.5 cm)
clearance

6.00" (15.24 cm)
clearance

Sensor distribution unit

(bins and ice and beverage dispensers only)

Front View Side View

12.00" (30.5 cm)
clearance

bin / dispenser topbin / dispenser top

Insulated transport tube

(RIDE applications)

Front View Side View

6.00" (15.24 cm)
clearance

Side View

LANE 2

mounting

bracket

Top mount on a bin (minimum bin width)

Front View

Y

X

LANE 1

4.12"

sensor

distribution

unit

min.

2.00"
(5.08 cm)
clearance

Note: For 30.00" (76.2 cm) Follett bin, sensor distribution
unit may be placed behind ice machine.

(10.46 cm)

Horizon Elite ice machine

min.

1. 00" (2.54 cm)
clearance

min.

0.50" (1.27 cm)
clearance

bin top

3.00" (7.62 cm) dia. hole required
to run tubing through walls

Form# 3265

3

Specification

Control panel

W1 Width of control panel 12.00" (30.5 cm)
D1 Depth of control panel 3.75" (9.52)
H1 Height of control panel 12.50" (31.8 cm)

Connections 30' (9.2 m) cable to diverter valve

Diverter valve with mounting bracket

W2 Width of diverter valve 13.62" (34.6 cm)
D2 Depth of diverter valve 17.50" ( 44.4 cm)
H2 Height of diverter valve 10.38" (26.4 cm)

Connections 8' (2.4 m) cord and plug,

15' (4.6 m) drain tubing
C1 Drain 3/8" NPT barbed drain fitting
Lane 1 insulated ice transport tube and

sensor cable

and connection kit for ice storage

unitused
Lane 2 insulated ice transport tube and

sensor cable to diverter valve

and connection kit for ice storage

unitused
Electrical

115 V/60/1

1.5 amps, 8' (2.4 m) cord,

NEMA 5-15 plug

Sensor distribution unit

W3 Width of distribution sensor 4.12" (10.46 cm)
D3 Depth of distribution sensor 7.75" (19.68 cm)
H3 Height of distribution sensor 3.50" (8.89 cm)

to diverter valve ‡,

†

†

‡

,

Dimensional drawing

Control panel

W1

H1

Diverter valve with
mounting bracket

D1

D2

H2

W2

General information

Approximate ship weight of
IceManager with 50' (15.2 m) of
icetransport tube

Operating temperature 40 - 120 F (4 - 49 C), relative

‡ Lengths to be specified by customer.
† Follett Vision ships with connection kit factory-installed (item# VUIMDVKIT).

NOTE: For indoor use only

SHORT FORM SPECIFICATION: Ice Manager diverter valve system to be
model IMDV-2. System to direct ice delivery to two bins or dispensers
automatically, utilizing sonic sensors to control level of ice.
Ice machine to be Follett Horizon Elite model __________________.
Lane 1 to fill ____________________ ,
Lane 2 to fill ____________________ .
(ice and beverage dispenser, bin or Vision)
Horizon Elite ice machine to be mounted on __________________
(bin, wall mount bracket or machine stand)
System to include _____ feet of insulated ice transport tube for Lane 1,
and _____ feet of insulated ice transport tube for Lane 2
(75' (22.8 m) max. length for each lane)
Horizon Elite ice machine and Ice Manager NSF, UL, and cUL listed.
System to be installed by Follett.

1

Lengths to be confirmed on-site prior to shipment. Lengths to include any bends and

turns needed to connect components.

120 lb (55 kg)

humidity not to exceed 55%

1

.

C1

16.00"

(40.6 cm)

Sensor distribution unit

H3

D3

W3

HORIZON, HORIZON ELITE, ICE•DEVICE, ICE MANAGER, SYMPHONY PLUS and VISION are trademarks of
Follett LLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary
depending on country of origin.

Ice Manager diverter valve system

3265-201912 | © Follett LLC

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com