Focusrite Pro RedNet D64R Data Sheet

REDNET D64R
64-channel bridge between MADI and Dante Networks
MADI is widely used for large-scale digital audio systems such as audio consoles and
conversion systems, allowing multiple channels to be carried along a single interface.
RedNet D64R provides the link between a Dante Ethernet-based audio system and any
MADI / AES10 setup. D64R supports up to 64 channels of both coaxial and optical MADI
interfaces and is completely bi-directional, allowing the use of any Dante components
including RedNet’s high quality interface products with a MADI system – or MADI
components with a Dante system.
D64R features a sample rate converter (SRC) on each input and output allowing
system is operating. Connect a Dante network to MADI-based digital consoles, computer
cards, converters and much more. In addition to both coax and optical MADI interfaces,
RedNet D64R provides Word Clock in and out.
PSU and Ethernet redundancy
Dual Ethernet ports are provided, with locking etherCON connectors and several
operating modes including daisy-chaining and redundancy confi rmed by front-panel
indicators. Two separate power supplies with fault detection capability are included,
with separate power input sockets (including retaining clips) on the rear of the unit.
Power status is indicated both remotely and on the front panel. The D64R features
a rugged, roadworthy exterior and high internal build quality. In addition, it offers
a compact 1U rack-mount form factor for a full 64 channels of I/O.
Key Features
Connects a MADI system and
a Dante network seamlessly
together. Connect Dante to digital
mixing consoles, interfaces and
cards that use MADI; or extend
a MADI system with RedNet’s
versatile, superb-quality audio
interfaces and connectivity – or any
other Dante compatible devices.
Built-in redundancy with dual locking
power and etherCON network
connectors.
Supports both coax and optical
interfaces – connect simply to any
MADI equipment
Slave either the Dante system or
MADI streams to an external clock
Supports up to 64 channels of
digital audio I/O at standard sample
rates (44.1/48kHz) from a MADI
system, 32 channels at 96kHz and
16 at 192kHz.
About RedNet
Launched in 2012, Focusrite's RedNet range was one of the fi rst to adopt the Dante
audio-over-IP network as the infrastructure for a new and versatile range of products.
Since then, RedNet has become increasingly popular for a diverse range of audio
applications, from theme parks to opera, from studio to major live events.
RedNet has become known for its quality and reliability – the latter a feature that is
brought even more to the fore by the inclusion of redundancy capabilities – as well as
proving exceptionally simple to operate and offering the best-sounding audio-over-IP
solution availablend full operability with other Dante devices.
Powered by
Sample rate conversion (SRC)
on each input and output, allowing
MADI and Dante systems to operate
simultaneously at different
sample rates.
Simple 1U rack-mount module with
the classic red aluminium faceplate.
RedNet Control and Dante software
allow remote routing and control
from the audio computer system
via a software control panel – no
hardware patching required.
3 4 521
1 – Dual AC inlets with cable clips 2 – Dual locking etherCON Ethernet connectors
3 – Coaxial I/O to MADI system 4 – Optical I/O to MADI system 5 – Word Clock I/O
Up to 64 channels
D64R supports up to 64 channels of digital audio from a MADI system at standard (44.1/48kHz)
sample rates, 32 channels at 88.2/96 kHz, or 16 channels at 176.4/192.
Related products:
Varispeed capability
D64R fully supports the MADI varispeed ( 56-channel) mode.
Add MADI to Dante – or Dante to MADI
D64R bridges a MADI system and a Dante network – and, like the rest of the Focusrite RedNet
range, it is fully interoperable with all other Dante network components. The bridging facility
means that you can use RedNet’s expanding range of high-quality audio interfaces to put
analogue or digital I/O, as well as third-party Dante-compatible products, exactly where you
need it – which is as close as the nearest Ethernet port. It also means that you can connect
Dante components to digital mixing consoles, interfaces and cards that use MADI.
Developed from the RedNet 6, Focusrite’s D64R is a second-generation bridging module
that can signifi cantly expand the options and possibilities of both MADI and Dante networks.
MP8R – 8 Ch. Mic Pre
D16R – AES3 Bridge
HD32 – HD Bridge
See the rest of the range at
www.focusrite.com/rednet
Specifi cations
Conne ctor s (Rear p anel)
2x etherCON locking Ethernet connectors – also compatible with standard RJ45 connectors
2x BNC Word Clock In and Out
2x BNC M ADI Co axia l In and Ou t
Duple x-SC MADI Optic al connector I n and Out
2x IEC po wer conn ector: 100 –240Vac, 50 /60 Hz, cord re taini ng
clips included
Controls (front panel)
Power on/off
Indic ators (front pane l)
Green LED power indic ator
Network Status: Primary/Secondary/ Locked
PSU: A/B
www.focusrite.com/rednet
Sample rate: 4 4.1/48kH z, x2, x4 , Pull
Clock Source: Internal, M ADI , Word Clo ck
MADI I nput : Coax, Opti cal, Auto
Clock Source: SRC, RedNet, MAD I Input, Word Clock
Signal: In, Out, Varispeed
MADI C oaxial
Electrical standard: as per AES10:2008
Connector: B NC 75Ω
Recommended cable: 75Ω characteristic impedance
MADI O ptic al
Optic al standard : as per A ES10:2008 ( ISO/IEC 9314-3, FDD I, ANSI X3 .166 )
Recommended Cable: Multi-mode, Graded-index, 62.5µm core, 125 µm cl ad di ng
Connector: Duplex-SC
(Single Mode available on request)
Supported Sample Rate s
44.1, 48, 88.2, 96, 176.4 , 192 kHz
Channel Count
Singl e rate: 64 (56 )
Doubl e rate: 32 ( 28)
Quad rate: 16 (14)
SRC
Lock ra nge: 41kHz to 216kH z (MADI )
Sample rate ratio limi t: 6:1
THD: –130dB (typical )
Latency: 43 to 192 sa mples ( sample rate dependent)
E&OE
D64R- DS • v1.1 • 20141001 • REƒ
Loading...