Focus Foodservice SHELVES DUNNAGE Specification Sheets

Item #

Job

DUNNAGE SHELVES

• Superior Strength: Dunnage shelves offer

considerably more weight-bearing capacity than other
Focus shelves. They can be combined with other Focus
shelves to provide extra strength at the lower levels of a
shelving unit where the heaviest loads will be placed. The 36"
(91.4 cm) length shelf has a 1,600-pound (727 kg) uniformly
distributed static load capacity, the 48" (121.9 cm) shelf holds
up to 1,300-pounds (591 kg), and the 60" (152.5 cm) shelf
holds up to 1,000 pounds (455 kg).

• Stress Resistance: The high static-load capacity of

these dunnage shelves translate into an increased ability to
stand up under the strain of unbalanced loads and the stress
of materials repeatedly being placed on the shelf typical of a
commercial food service operation.

FOCUS DUNNAGE SHELVES

• Shelf Construction: These dunnage shelves have the

same tapered corners and split sleeves that accommodate
the 1" (25 mm) posts used for other Focus shelving. They
assemble easily, fit securely, and are compatible with same
sized Focus wire shelving.

• Two-Piece Design: Removable wire deck fits over

reinforced 1" (25 mm) square, tubular frame. It lifts off for
easy, thorough cleaning.

• Smooth Loading & Unloading: The front-to-back

upper ribs of the deck allow you to slide items on and off the
shelves smoothly.

• Adjustable: Rolled grooves on the posts enable

dunnage shelves to be positioned at desired levels in
1" (25 mm) increments.

• Finishes: Available in chrome-plated and green

epoxy coated.

Focus Foodservice, LLC • 300 Knightsbridge Parkway, Suite 500 • Lincolnshire, IL 60069 • www.focusfoodservice.com

DUNNAGE SHELVES

Shelves

Job

Item No. Green

Item No. Chrome

FFSM1836CH FFSM1836GN 18 45.7 36 91.4 20.8 9.5

FFSM1848CH FFSM1848GN 18 45.7 48 121.9 27.4 12.5

FFSM1860CH FFSM1860GN 18 45.7 60 152.4 33.9 15.4

- FFSM2430GN 24 61 30 76 17.3 7.9

FFSM2436CH FFSM2436GN 24 61 36 91.4 25.3 11.5

FFSM2448CH FFSM2448GN 24 61 48 121.9 33.2 15.1

FFSM2460CH FFSM2460GN 24 61 60 152.4 41.2 18.7

Epoxy Coated

Width Length Approx Pkg Wt.

(in.) (cm) (in.) (cm) (lbs.) (kg)

Posts

Item No. Green

Item No. Chrome

FG007C FG007G 7 17.8 0.5 0.2

FG013C FG013G 13 33 0.9 0.4

FG033C FG033G 33 83.8 2.0 0.9

FG054C FG054G 54 137.2 3.1 1.4

FG063C FG063G 63 160.0 3.6 1.6

FG074C FG074G 74 188.0 4.2 1.9

FG086C FG086G 86 218.4 4.9 2.2

Epoxy Coated

Height Approx Pkg Wt.

(in.) (cm) (lbs.) (kg)

Specifications

• Shelves: The shelf support frame is made of 1” (25 mm) square tubing. The removable wire deck is made from 5/16” (8.0 mm)

diameter wire. Available in chrome-plated and green epoxy coated finishes.

• Posts: Posts have an outside diameter of 1” (25 mm) with rolled grooves in 1” (25 mm) increments along the entire length.

Available in chrome-plated and green epoxy coated finishes.

Important: Stability decreases as the ratio of height to width increases when heavier loads are placed on the upper shelves. Keep units

as wide and low as possible, using the dunnage shelf as the bottom shelf. If two dunnage shelves are being used, both should be placed
within the lower half of the unit. Dunnage shelves are not recommended for use in shelf carts or trucks.

Focus Foodservice, LLC • 300 Knightsbridge Parkway, Suite 500 • Lincolnshire, IL 60069

Phone [phone] • Fax [phone] • www.focusfoodservice.com

rev. 1112