Bedienungsanleitung bitte aufbewahren
Keep this Manual for later queries
Änderungen sind ohne Ankündigung möglich.
Changes are possible without prior notice.
Rev. 2018-26-31
Die beiliegenden Bedienhinweise für Expolite
Geräte sind Bestandteil dieser Bedienungsanleitung. Lesen Sie diese sorgfältig, bevor
Sie das Gerät in Betrieb nehmen.
The enclosed General Information for Expolite
Units are part of these user manual. Read them
carefully before operating the device.
Expolite Geräte werden vor dem Versand sorgfältig geprüft. Sollte der
Lieferumfang dennoch nicht vollständig sein, wenden Sie sich bitte umgehend
an Ihren Vertriebspartner.
D-04
Technische Daten
Spannungsversorgung
Maximale Leistungsaufnahme
Abmessungen
Gewicht
Anschlüsse
Betriebstemperatur
Luftfeuchtigkeit
Schutzklasse
Gehäuse
LEDs
Abstrahlwinkel
Steuerung
100V - 240V AC 50/60Hz
400W
462 x 271 x 493 mm
8 kg
Power In/Out | DMX In/Out
-20°C - 45°C
< 98%
IP 20
beschichtetes Metall
462 x OSRAM (192 x RGB LEDs Außenring, 144 x
RGB LEDs Innenring, 108 x WW LEDs + 18 x
Amber LEDs Zentrum)
60°
Stand-Alone / DMX512
DMX-Kanäle
* Toleranzbereich der Farbtemperatur entsprechend Herstellerangabe +/- 10%
2 - 64 (2/7/16/51/55/64)
D-05
Abmessungen
D-06
Installation
Montage
Hängend
Das Gerät hat eine 12,5mm Bohrung im Bügel zum Anbringen von Schellen und Zapfen bis M12.
Geräte müssen entsprechend der jeweils gültigen Vorschriften sicher montiert und mit einer zweiten
Sicherung gegen herabfallen versehen werden. Hierzu ist am Gerät eine Öse für Safeties
angebracht.
Stehend
Das Gerät kann direkt auf dem Basement stehend betrieben werden. Eine
sichere und ausreichend rutschhemmende Standfläche ist sicherzustellen!
HINWEIS
Das LED Modul kann in jeder beliebigen Lage betrieben werden.
DMX-Verbindung
Die Geräte mit geeigneten DMX-Kabeln miteinander und mit dem Kontroller verbinden.
Die vorgesehenen DMX-Adressen und Personalities an den Geräten einstellen.
DM X Ad dr.1DM X Ad dr.(Nx1)+1 DM X Ad dr.(Nx2)+1
............
DMX512
CONT ROLLE R
D-07
Bedienung
Bedienelemente am Gerät
Menüstruktur
ME NU
Address
Config Mode
System Info
Load Default
LED All On
Auto Test Speed
Auto Test
0 - 255
Channel Mode
Keep Screen On
Keep DMX Data
Fast Dimmer
Temperature
TRUE
FALSE
LED all on
Auto Mode Speed
Auto Mode 1
Auto Mode 2
Auto Mode 3
Auto Mode 4
Auto Mode 5
Auto Mode 6
2Ch
7Ch
16Ch
51Ch
55Ch
64Ch
Disable
Enable
Disable
Enable
Disable
Enable
0 - 255
D-08
DMX-Adresse einstellen
ME NU
Address
0 - 255
Im Menü wird im Punkt ADDRESS die DMX-Startadresse des Gerätes eingestellt. Diese bleibt auch
bei dem Wechsel des Channel Modes erhalten.
DMX-Kanalbelegung einstellen
ME NU
Config Mode
Channel Mode
2Ch
7Ch
16Ch
51Ch
55Ch
64Ch
Im Menü wird im Punkt Config Mode, Untermenü Channel Mode die Belegung der DMX-Kanäle
des Gerätes festgelegt. Es stehen folgende Modi zur Verfügung: 2-/7-/16-/51-/55-/64 Kanäle.
Config Mode
ME NU
Config Mode
Keep Screen On
Keep DMX Data
Fast Dimmer
Disable
Enable
Disable
Enable
Disable
Enable
Keep Screen On: legt fest, ob die Hintergrundbeleuchtung aktiv (ENABLE) oder inaktiv (DISABLE)
ist.
Keep DMX Data: stellt das Verhalten bei Unterbrechung des DMX-Signals ein. ENABLE um den
letzten empfangenen Wert zu halten, oder DISABLE für Blackout.
Fast Dimmer: legt fest, ob der Scheinwerfer langsam ausdimmt, wie ein Halogenscheinwerfer
(DISABLE) oder ohne zu dimmen erlischt (ENABLE).
D-09
Sonstige Einstellungen
ME NU
System Info
Load Default
LED All On
Auto Test Speed
Auto Test
Temperature
TRUE
FALSE
LED all on
Auto Mode Speed
Auto Mode 1
Auto Mode 2
Auto Mode 3
Auto Mode 4
Auto Mode 5
Auto Mode 6
0 - 255
System Info\Temperature: zeigt die aktuelle Temperatur der LED-Einheit
Load Default: setzt das Gerät zurück auf die Werkseinstellungen (TRUE) oder bricht den Vorgangwieder ab (FALSE).
LED All On: bietet die Möglichkeit alle LEDs zu aktivieren um den Scheinwerfer ggf. zu überprüfen.
Auto Test: bietet die Möglichkeit verschiedene automatische Testprogramme aufzurufen. (Auto
Mode 1-6)
D-10
Steuerung mit DMX512
10-255Master
Flow Effect
0-41
No Function
42-83
Effect 1
84-125
Effect 2
126-167
Effect 3
168-209
Effect 4
210-255
Effect 5
2Ch Mode
2
10-255Maste r
20-255Outer Dimmer (White colour)
Outer Strobe
0-10
No function
11-240
Strobe slow to fast
241-255
Random Strobe
40-255Inner Dimmer
Inner Strobe (Ch 1 + 4 need to be on)
0-10
No Function
11-240
Strobe slow to fast
241-255Random Strobe
60-255Center Dimmer
Center Strobe (Ch 1 + 6 need to be on)
0-10
No function
11-240Strobe slow to fast
241-255Random Strobe
5
7
7Ch Mode
3
DMX-Kanalbelegung
Dieses Gerät verfügt über verschiedene DMX-Personalities. Bei diesen werden unterschiedlich
viele DMX-Kanäle belegt und die Reaktion des Gerätes unterscheidet sich entsprechend.
Es sind 6 DMX-Personalities (2-/7-/16-/51-/55-/64-Kanäle) wählbar.
Durch Änderungen in der Gerätesoftware kann es zu weiteren oder geänderten Funktionen kommen.
Auf der Website steht das aktuellste Dokument „DMX-Channels“ als pdf zum Download zur
Verfügung.
Expolite devices are carefully checked before shipment. If the delivery is not complete,
please contact your distributor immediately.
E-26
Product Information
Voltage
Power Consumption
Dimensions
Weight
Connectors
Ambient Temperature
Humidity
Protection
Housing
LEDs
Optics
Control
100V - 240V AC 50/60Hz
400W
462 x 271 x 493 mm
8 kg
Power In/Out | DMX In/Out
-20°C - 45°C
< 98%
IP 20
Coated Metal
462 x OSRAM (192 x RGB LEDs Outer Ring, 144 x
RGB LEDs Inner Ring, 108 x WW LEDs + 18 x
Amber LEDs Centrum)
60°
Stand-Alone / DMX512
DMX-Channels
* Tolerance in colour temperature according to LED manufacturer +/- 10%
2 - 64 (2/7/16/51/55/64)
E-27
Dimensions
E-28
Installation
Mounting
Hanging
The fixture has a 12,5mm hole in the bracket to mount spigots or half coupler up to M12.Fixture must
be safe mounted in accordance with the relevant regulations and provided with a safetycord to
prevent falling. For this purpose, an eyelet for safeties is attached to the device.
Standing
The fixture can be mounted in an upright or sitting position. A safe and
sufficient anti-slip ground must be ensured!
NOTE
The LED module can be operated in any position.
DMX-Connection
Use specified DMX-cables to connect the units to each other and to connect them to the controldesk. Enter the addresses and personalities to the units.
DM X Ad dr.1DM X Ad dr.(Nx1)+1 DM X Ad dr.(Nx2)+1
............
DMX5 12
CONT ROLLE R
E-29
Operation
Display Operation
Return to previous menu
Enter currently selected menu
Scroll up, Increase value
Scroll down, Decrease value
Menu Map
ME NU
Address
Config Mode
System Info
Load Default
LED All On
Auto Test Speed
Auto Test
0 - 255
Channel Mode
Keep Screen On
Keep DMX Data
Fast Dimmer
Temperature
TRUE
FALSE
LED all on
Auto Mode Speed
Auto Mode 1
Auto Mode 2
Auto Mode 3
Auto Mode 4
Auto Mode 5
Auto Mode 6
2Ch
7Ch
16Ch
51Ch
55Ch
64Ch
Disable
Enable
Disable
Enable
Disable
Enable
0 - 255
E-30
Setting DMX-Address
ME NU
Address
0 - 255
The DMX start address of the fixture is set in the menu ADDRESS. This is retained even when
changing the Chanel Mode.
Setting DMX-Channels
ME NU
Config Mode
Channel Mode
2Ch
7Ch
16Ch
51Ch
55Ch
64Ch
The user can set the DMX Channel Mode In Config Mode, submenu Channel Mode. The following
numbers of channels are available: 2-/7-/16-/51-/55-/64 Channels.
Config Mode
ME NU
Config Mode
Keep Screen On
Keep DMX Data
Fast Dimmer
Disable
Enable
Disable
Enable
Disable
Enable
Keep Screen On: ENABLEs or DISABLEs display illumination of the fixture.
ist.
Keep DMX Data: sets how the fixture responses if DMX-signal gets lost. Set ENABLE to hold the last
received value or DISABLE for blackout.
Fast Dimmer: gives you the opportunity to make the fixture behave as a halogen light
(DISABLE) or not (ENABLE).
E-31
Miscellaneous
ME NU
System Info
Load Default
LED All On
Auto Test Speed
Auto Test
Temperature
TRUE
FALSE
LED all on
Auto Mode Speed
Auto Mode 1
Auto Mode 2
Auto Mode 3
Auto Mode 4
Auto Mode 5
Auto Mode 6
0 - 255
System Info\Temperature: shows current temperature of the LED-Unit.
Load Default: resets Fixture to factory defaults (TRUE) or cancels the operation (FALSE).
LED All On: sets all LEDs active to check the fixture.
Auto Test: possibility to run different autotest programs. (Auto Mode 1-6)
E-32
Using DMX512 Control
10-255Maste r
Flow Effect
0-41
no function
42-83
Effect 1
84-125
Effect 2
126-167
Effect 3
168-209
Effect 4
210-255
Effect 5
2Ch Mode
2
10-255Master
20-255Outer Dimme r (White colour)
Outer Strobe
0-10
No function
11-240
Strobe slow to fas t
241-255
Random strobe
40-255Inner Dimmer
Inner Strobe (Ch 1 + 4 need to be on)
0-10
No funtion
11-240
Strobe slow to fast
241-255Random strobe
60-255Center Dimmer
Center Strobe (Ch 1 + 6 need to be on)
0-10
No function
11-240Strobe slow to fast
241-255Random strobe
5
7
7Ch Mode
3
DMX-Channel assignment
This device has several DMX personalities. In each personality a different number of DMX channels
is used and the reaction of the device differs accordingly. There are six DMX personalities with 2,
7, 16, 51, 55 and 64 channels selectable.
Because of changes in the firmware of the fixture, functions can be added or changed. You can find the current version
„DMX-Channels“ as PDF-file on the website, ready to download.