amica
drywall frame kit
specify “DF” Drywall Frame Kit for drywall
ceiling conditions.
drywall frame kit
specify “DF” Drywall Frame Kit for drywall
ceiling conditions.
grid
for lay–in grid, specify G1, G2 or G3.
FAML 2x2 | 2x4
™
AVOID ALL CONTACT WITH LED SURFACE, LEDs ARE EASILY DAMAGED!
focal point
FLAT TEE (G1, G2)
SLOT TEE (G3)
1
2
x4
AIR RETURN (AR)
3
x4
key
power off
power on
attention
4
5
x4
6
7 8 9
x2
IS0509 REV. B 2015 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 1 of 2
Luminaires must be installed by a qualied electrician (check with local and national codes for proper installation).
make electrical connections
To prevent electrical shock, diconnect electrical supply before installation or servicing.
serVice
1
air retUrn installation
1 11113112
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
remoVe DriVer coVer
11
32
make electrical connections
0-10V DIMMING & NON-DIMMING STANDARD WIRING
(+)*
LED
(-)*
*OUTPUT WIRE VARIATIONS:
RED (+), BLUE (-)
RED (+), BLACK (-)
BLACK (+), YELLOW (-)
reference DriVer manUfactUrer’s spec sHeets for DriVer specific wirinG DiaGrams.
emerGency lUminaires wireD accorDinG to Battery MANUFACTURER’s instrUctions.
GREEN
WHITE
(NEUTRAL)
GRAY (-)
BLACK
PURPLE (+)
(LINE)
PURPLE
GRAY
**OPTIONAL**
0-10V DIMMER
(individually capped at factory
for non-dimming applications)
(if capped together, xture will
automaticaly dim to lowest setting)
Contractor is responsible for adequately reinforcing walls and/or ceilings to support luminaire weight. Focal Point, LLC accepts no responsibility for inadequately reinforced walls
and/or ceilings. The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC
is prohibited.
IS0509 REV. B 2015 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 2 of 2
Loading...