Focal UNIVERSAL ISN User Manual

UNIVERSAL ISN

User manual / Manuel d’utilisation

English page 3

Français page 10

UNIVERSAL ISN

User manual

Thank you for choosing Focal and for sharing our passion for the “Spirit of Sound”. Designed using the latest
technology, these speakers integrate Focal’s perfectionist believes, developing products with high power handling,
and unrivalled sound quality. To obtain the best results from this product, we recommend that you follow carefully
all the information contained in this user’s manual. If not correctly followed, any fault observed may not be covered
by the guarantee.

Warning

Continuous listening at high sound level (above 110dB) can durably damage your hearing. Listening above 130dB can
damage your hearing permanently.

The Focal guarantee only applies if the enclosed guarantee card

is returned to us within 10 days of purchase.

Important recommendations

Before attempting any installation work, it is very important to check how much space is available to fit the speakers
into the vehicle.

Key points:

• Ensure the speaker is clean from debris and metallic particles that maybe attached (especially after drilling).

• Clean before mounting the speakers.

English version

UNIVERSAL ISN

User manual

Tweeter

1/ Tweeter accessories (tilted and flush mounting)

2/ Assembling the tweeters to the mounts

3

3/ Connecting the tweeters

When installing on a demonstration display, connect the “display” wire.
When installing in a vehicle: connect the "car" wire.
The unmarked wire is the earth wire with both connection options.

UNIVERSAL ISN

User manual

4/ Accessories to facilitate installation of the tweeters in their original location

Woofer ISN 100/130/165

1/ Mounting the woofer into place (without grill)

4

UNIVERSAL ISN

User manual

2/ Rear view of the terminal block (marked “+” and “-”)

5

3/ Mounting the woofer + wire / crossover: 2 mounting options

Option 1 (woofer + cable).

+

integrated crossover

++

UNIVERSAL ISN

User manual

Option 2 (woofer + cable + ISO connector to ensure compatibility with certain brands of vehicles)

integrated crossover

4/ Rear view of the driver with and without rubber cover

If mounting in very confined spaces, you can remove the molded rubber surround suspension in order to obtain the
best fit for the woofer in the original place.

6

UNIVERSAL ISN

User manual

5/ View of the full installation in the vehicle

7

UNIVERSAL ISN

User manual

Installing the ISN 130

1/ Fixing clips

2/ Mounting fixing clips

8

The ISN 130 woofer comes with clips for front or rear mounting.
It some cases 2/3 fixing clips can be used (for example 2 clips at 180° on Renault® vehicles).

3/ Accessories

These kits are made to fit into the original locations more easily and are
sold without grills (mounting n the door).
A Focal signature is included in each kit (diamond-cut aluminum
support + adhesive). This signature can be fixed inside the door of your
vehicle for example.