Focal Sopra SW 1000 Be User Manual

SW 1000 BE

Product Data Sheet

The SW 1000 Be is the redesigned version of the Electra Be subwoofer to ensure compatibility with the other loudspeakers in the Sopra line. It
is equipped with a 13" (33cm) "W" cone speaker driver and a high-power 600 W RMS BASH® amplifier. The 24-bit digital processor offers a large
control panel with settings for adapting the sub to various listening rooms. The SW 1000 Be offers very high performance with a bass cut-off
frequency of 18 Hz and an SPL of 118 dB. This model is available in the Black Lacquer finish.

High power 600 W RMS

BASH® amplifier

DSP (Digital Signal

Processor)

Numerous settings for

LCD control panel.

13" (33cm) "W" cone
speaker driver
High rigidity, no distortion,
even at high volumes.

optimising the

subwoofer for the

listening room

Several SW 1000 Be

subwoofers can be

linked up.

Front laminar port.

No dynamic bass

compression.

SW1000Be Black Lacquer finish

Key points

• High power amplifier

• Speaker driver developed and manufactured in France by Focal

• Numerous available settings

Standard finish

Black Lacquer

Type

Drivers

Frequency response (+/-3dB)

Low frequency point (-6dB)

Subwoofer features Adjustable LPF: 50Hz to 150Hz (24dB/oct.),

Recommended amplifier power

Dimensions (HxWxD)

Net weight

Active bass-reflex subwoofer

13" (33cm) "W" woofer

20Hz - 150Hz

18Hz

48dB/oct. adjustable subsonic filter,
adjustable phase, Boost mode,
Night mode, 3 user memories,
LFe/Stereo/Digital inputs.

600W (750W max.) BASH® amplifier

1/16

11/16

21

x19

x17" (535x500x432mm)

92.4lb (42kg)

Focal® is a trademark of Focal-JMLab® - www.focal.com - SCBC - 160426/1