ELECTRA IC1002
Product Data Sheet
In-Ceiling adaptation of the IW1002, the Electra IC1002 is a high-end loudspeaker, equipped with an exclusive coaxial driver,
featuring a 'W' cone and an Al/Mg tweeter, for maximum musicality and power handling. Perfect for a quality main system or
as a high-end In-Ceiling eect speaker.
6.5" (16.5cm) 'W' cone midbass.
Exclusive composite sandwich.
Unequaled rigidity and neutrality.
MADE IN FRANCE
OPC filtering, phase
optimal control.
Tweeter level adjustments.
Coaxial Aluminum/Magnesium
inverted dome tweeter.
Response up to 30kHz.
Wall Boost Control.
Key features
• 'Made In France'
• Excellent power handling and high efficiency
• Easy and quick installation
• Optional mounting kit (for ceilings under construction)
Type 2-way In-Ceiling speaker
Drivers 6
Frequency response (±3dB) 60Hz-30.5kHz
Sensitivity (2.83V/1m) 88dB
Nominal impedance 8Ω
Recommended amplifier power 25-150W
Tweeter adjustment -3dB / 0dB / +3dB
Crossover frequency 2,600Hz
Frame size: - with grille
- without grille
Cut-out dimensions Ø8
Depth from wall 3
Net weight 4.6lbs (2.1kg)
1/2
" (16.5cm) 'W' midbass.
1" (25mm) Al/Mg inverted dome tweeter
3/4
Ø10 x 3
11/16
" (221mm)
5/8
" (92mm)
" (Ø253 x 96mm)
Grille and frame ready-to-paint.
Aluminum grille, reinforced ABS frame.
Total integration.
Focal® is a trademark of Focal-JMLab® - wwwfocalcom - SCAA
(dB) Leve l, Sound pre ssure
20 50 200 500 2k 5k 20k
110
90
70
50
30
-30°
-60°
-90°
+30°
+60°
+90°
0°
0
-10 -20
-30°
-60°
-90°
+30°
+60°
0°
Dimensions
97,24
252,50
218,50
103
Directivity Measurements
Vertical
Frequency Response
Electra IC1002 Speaker level Calculation Table
Power/Distance 1 m 2 m 5 m
1W (2.83V) 88dB 82dB 74dB
10W (8.94V) 98dB 92dB 84dB
20W (12.6V) 101dB 95dB 87dB
30W (15.5V) 103dB 97dB 89dB
Summary 125 Hz 250 Hz 500 Hz 1kHz 2kHz 4kHz 8kHz
NPA(2.83V/1m)(dB) 89 89 89 88 86 88 86
Opening Angle at -6dB 180° 180° 180° 180° 100° 80° 100°