Figure 7705
PIPING PRODUCTS
FNW gure 7705 pipe supports are
designed specically for rooftop
and raised oor applications. The
patented* pipe supports are made
from closed-cell polyethylene foam
that is UV and weather resistant,
and include a high density molded
polyethylene cap with integrated strut
design that is compatible with FNW
strut accessories.
Features:
• 30 Lbs. Maximum Load
PIPE SUPPORTS
• Available in 4” Height
• Closed-Cell Medium Density
• Black Expanded Polyethylene Foam
• High Density Molded Polyethylene
Cap With Integrated Strut Design
• Hot Melt Adhesive Bonded HDP To
Foam Block
* U.S. Patent No. 5,855,342
U.S. Patent No. 6,679,461
Specications
Part Number Height Width Depth Max. Load
FNW7705PPS 4 4 5 30 Lbs.
www.fnw.com
PIPE SUPPORTS
Figure 7705
PIPING PRODUCTS
Components
Physical Properties Test Method Direction Value
Density Compressive D3575-08, ASTM D 3575, N/A 4.0 pcf
Set Sufx B Vertical <15%
Compressive Creep ASTM D3575-08, Sufx BB Vertical <10%
@ 5.0 psi (1000 hr/72 F)
Thermal Stability ASTM D3575-08, Sufx S N/A <2%
Water Absorption ASTM D3575-08 N/A <0.2 lb/ft²
DOC: FNW770514 Ver. 9/2014
© 2014 - FNW. All rights reserved.22532 06914
The FNW logo is a registered trademark of Ferguson Enterprises, Inc.
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available on request. We reserve the right to modify or improve the designs or specications of our products at any time without notice. Always
verify that you have the most recent product specications or other documentation prior to the installation of these products.
Loading...