FNW 7803, 7804, 7805, 7250, 7251 User Manual
...
Beam Clamps
3.50 88.9
3.50 88.9
1.13 28.6
0.81 20.6
0.56 14.3
3 PLACES
Beam Clamps
FIGURE 7803 - Square U-Bolt to Beam Clamp
Clamp Includes 3/8" – 16 Rolled
Thread U-Bolt and 2 Hex Nuts
NOTES:
• Max Flange Thickness 3/4" Thick
• Tightening Torque - 150 IN-Lbs
• Beam Clamp Allowed Loads shown
valid only when used in pairs
(Safety Factor of 5)
• Strut Safety Factor Determined
1 5/8" [41.3]
MAX
by Others
For 13/16" & 1-5/8" Channel
Design load 1200 Lbs [5.34 kN] when used in pairs
Catalog Number: FNW7803Z
Pullout 2000 Lbs (Load Centered Between Clamps)
Slip Along (500 Lbs)
Slip Thru (1200 Lbs)
when used in pairs
FIGURE 7804 - Square U-Bolt Strut to Beam Clamp
Clamp Includes 3/8" – 16 Rolled
Thread U-Bolt and 2 Hex Nuts
NOTES:
• Max Flange Thickness 3/4" Thick
• Tightening Torque - 150 IN-Lbs
• Beam Clamp Allowed Loads shown
valid only when used in pairs
(Safety Factor of 5)
3 1/4" [82.5]
MAX
• Strut Safety Factor Determined
by Others
For 2-7/16" & 3-1/4" Channel
Design load 1200 Lbs [5.34 kN] when used in pairs
Catalog Number: FNW7804Z
Pullout 2000 Lbs (Load Centered Between Clamps)
Slip Along (500 Lbs)
Slip Thru (1200 Lbs)
when used in pairs
FIGURE 7805 - Notched Type Strut to Beam Clamp
FIGURE 7250 - Beam Clamp Retaining Strap
UL Approved
Finish: G90 Galvanized Coating
Material: Carbon Steel, ASTM A653 type B
Catalog Number W T L
Typical Installation
FNW7250Z0600 0.95” 16 ga. 8.00”
FNW7250Z0800 0.95” 16 ga. 10.00”
FNW7250Z1000 0.95” 16 ga. 12.00”
FNW7250Z1200 0.95” 16 ga. 14.00”
FNW7250Z1400 0.95” 16 ga. 16.00”
FIGURE 7251 - Retrot Beam Clamp Retaining Strap
180°
1-1/2"
Ø 1/2"
'L'
UL Approved
Finish: G90 Galvanized Coating
Material: Carbon Steel, ASTM A653 type B
Catalog Number GA. W L
'W'
1-1/2"
FNW7251Z0600 16 ga. 1.25" 8.00"
FNW7251Z0800 16 ga. 1.25" 10.00"
FNW7251Z1000 16 ga. 1.25" 12.00"
FNW7251Z1200 16 ga. 1.25" 14.00"
FNW7251Z1400 16 ga. 1.25" 16.00"
0.56 14.3
Material is 1-5/8" [41.3] wide x 1/4" [6.3] thick
2.75 69.9
Clamp requires 1/2"-13 HCS and 1/2”channel nut, order separately
Design load 1100 Lbs [4.89 kN] when used in pairs
Catalog Number: FNW7805Z
Phone: 503-287-8383 ~ Fax: 503-281-9677 ~ www.FNW.com
FIGURE 7865 - Roller Trolley 4-Bearing Assembly
1.13 28.6
3.50 88.9
3.50 88.9
0.56 14.3
3 PLACES
0.81 20.6
1.31 33.3
1.31 33.3
2.13 54
*
*
Stainless steel ball bearings
Max load rating of 600 lbs. [2.67 kN] with 12ga channel
* Based on standard dimensions for channel
Catalog Number: FNW7865Z4
17
Loading...